Robert Pierer

(Former)

1 - 48 out of 48Page size: 100

Research output

  1. 2014
  2. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 1 Jan 2014, In: Steel research international. 85, 8, p. 1257-1265 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Experimental und numerical investigations on hot tearing during continuous casting of steel

    Arth, G., Bernhard, C., Ilie, S., Schaden, T. & Pierer, R., 2014, Conference Proceedings of the 8th ECCC. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. 2013
  5. Published

    Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    Presoly, P., Bernhard, C. & Pierer, R., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 5377-5388

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    IMC-B – ein neuer Ansatz zur Untersuchung der Oberflächenrissbildung im Stranggießprozess

    Krajewski, P., Bernhard, C., Pierer, R., Schneller, F. & Schaden, T., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. p. 108-115

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2012
  8. Published

    Experimental investigations into surface crack formation under continuous casting conditions

    Krajewski, P., Pierer, R., Bernhard, C., Schaden, T. & Ilie, S., 2012, 5th International Congress on the Science and Technology of Steelmaking. p. Paper-1332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Identification of defect prone peritectic steel grades by analyzing the high temperature phase transformations

    Presoly, P., Pierer, R. & Bernhard, C., 2012, Defects and Properties of Cast Metals - Solidification Structure and Segregation. p. 299-306

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 2012, 5th International Conference on the Science and Technology of Steelmaking. p. Paper-1143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012, IOP Confernece Series (MCWASP XIII) - Materials Science and Engineering. p. 012064-012065

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    The importance of solidification structure with respect to hot tearing during continuous casting of steels

    Pierer, R., Rauter, W. & Bernhard, C., 2012, TMS 2012. p. 251-258

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. 2011
  15. Published

    Experimental methods to characterise new steel grades by means of thermal analysis

    Presoly, P., Pierer, R. & Bernhard, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Investigation of the implications of the current conductive mold technology with respect to the internal and surface quality of ESR ingots

    Holzgruber, H., Scheriau, A., Knabl, M., Kubin, M., Korp, J. & Pierer, R., 2011, INTERNATIONAL SYMPOSIUM ON LIQUID METAL PROCESSING AND CASTING. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Measuring mechanical behavior of steel during solidification: Modeling the SSCC test

    Rowan, M., Thomas, B., Pierer, R. & Bernhard, C., 2011, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 42, 4, p. 837-851

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Pool Profile Formation and Homogeneity of Remelted Ingots using the Electroslag Current Conductive Mold Technology

    Kubin, M., Korp, J. & Pierer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    The formation of hot tear segregations in the continuous casting process

    Ilie, S., Reisinger, P., Bernhard, C. & Pierer, R., 2011, 3rd Chinese-German Metallurgy Seminar on Fundamentals of Iron and Steelmaking. p. Paper-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. 2010
  21. Published

    The working group "continuous casting: Metallurgy and materials (M2CC)" at Leoben University, Austria

    Bernhard, C., Pierer, R. & Michelic, S. C., 1 Dec 2010, AISTech 2010 - Proceedings of the Iron and Steel Technology Conference. p. 977-986 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Experimental characterisation of new peritectic steel grades

    Presoly, P. & Pierer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Experimental simulation of crack formation of steels in the temperature range of second ductility through

    Krajewski, P. & Pierer, R., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    The Nature of Internal Defects in Continuously Cast Steel and their Impact on Final Product Quality

    Pierer, R. & Bernhard, C., 2010, AIST Proceedings 2010. p. 193-203

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    The Working Group "Continuous Casting: Metallurgy and Materials" (M²CC) at Leoben University

    Bernhard, C., Pierer, R. & Michelic, S., 2010, Proceedings of the AISTech 2010. p. 01-08

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Vergleichende Untersuchungen an Stranggussbrammen und Laborversuchsproben

    Reiter, J., Pierer, R., Ilie, S., Presslinger, H., Fluch, J. & Bernhard, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 129-135

    Research output: Contribution to journal › Article › Research › peer-review

  27. 2009
  28. Published

    AS2A Software - A new tool for Automatic Solidification Structure Analysis

    Griesser, S., O'Leary, P., Stangl, S. & Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Automatic Determination of Primary Grain Size using Dendrites Orientation in Metallurgical Micrographs

    Griesser, S., O'Leary, P. & Pierer, R., 2009, Quality Control by Artificial Vision. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Characterisation of phase transformation and damage during the solidification of steel

    Presoly, P. & Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Charakterisierung Heißrissbildung

    Pierer, R., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Determination of Primary Grain Boundaries in Metallurgical Micrographs via Discontinuities in the Dendrite Orientation

    Griesser, S., O'Leary, P. & Pierer, R., 2009, In: Journal of electronic imaging.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Über die Bildung von Heißrissseigerungen in Stahl: Metallographische Analyse und Charakterisierung

    Pierer, R., Griesser, S., Reiter, J. & Bernhard, C., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 154, p. 346-353

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2008
  35. Published

    On the influence of carbon on secondary dendrite arm spacing in steel

    Pierer, R. & Bernhard, C., 2008, In: Journal of materials science. p. 6938-6943

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Über den Zusammenhang zwischen Primärstruktur und erstarrungsbedingten Fehlern am Beispiel der Heißrissbildung beim Stranggießen

    Reiter, J., Ilie, S., Pierer, R. & Bernhard, C., 2008, Fortschritte in der Metallographie. p. 185-190

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. 2007
  38. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2007, In: Revue de métallurgie. p. 72-83

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A Hot Tearing Criterion for the Continuous Casting Process

    Pierer, R., Michelic, S., Bernhard, C. & Chimani, C., 2007, A Hot Tearing Criterion for the Continuous Casting Process. Steel Institute VDEh, p. 893-900

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Bestimmung der kritischen Dehnung der Heißrissbildung an Kohlenstoffstählen

    Pierer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Einfluss von Spurenelementen auf die Heißrissbildung beim Stranggießen von Stahl

    Brombauer, M., Reiter, J. & Pierer, R., 2007, Proceedings des 14. Internationalen Studententags der Metallurgie. p. 22-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Experimental Simulation of Defect Formation in the Continuous Casting Process

    Bernhard, C., Pierer, R., Tubikanec, A. & Chimani, C., 2007, SMEA Conference on the Effect of Melting, Refining and Casting on Product Quality and Properties. p. Session II-Paper 2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Formulation of a hot tearing criterion for the continuous casting process

    Pierer, R. F., 2007, 168 p.

    Research output: Thesis › Doctoral Thesis

  44. Published

    Heißrissbildungsmodel für das Stranggießen von Stahl und experimentelle Validierung

    Pierer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Numeric Modelling of the Heat Transfer in the Continuous Casting Mould

    Michelic, S., Bernhard, C. & Pierer, R., 2007, Numeric Modelling of the Heat Transfer in the Continuous Casting Mould. p. 209-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Überblick über Ergebnisse der SSCT Apparatur in Hinblick auf die Heißrissbildung bei Kohlenstoffstählen

    Pierer, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. 2006
  48. Published

    A Contribution to Hot Tearing in the Continuous Casting Process

    Pierer, R., Bernhard, C. & Chimani, C., 2006, International ATS Steelmaking Conference. Ed. de la Revue de Métallurgie, p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Heißrissbildung – Theorie und Kriterien

    Pierer, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions

    Pierer, R. & Bernhard, C., 2006, High Temperature Behavior during Solidification of Peritectic Steels under Continuous Casting Conditions. p. 793-803

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Metallurgical Aspects of Casting High-Manganese Steel Grades

    Gigacher, G., Pierer, R., Wiener, J. & Bernhard, C., 2006, In: Advanced engineering materials. 8, p. 1096-1100

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Metallurgical Aspects of Casting High-Manganese Steels

    Gigacher, G., Bernhard, C., Pierer, R. & Wiener, J., 2006, In: Advanced engineering materials.

    Research output: Contribution to journal › Article › Research › peer-review

  53. 2005
  54. Published

    Evaluation of common constitutive equations for solidifying steel

    Pierer, R., Bernhard, C. & Chimani, C., May 2005, In: Berg- und hüttenmännische Monatshefte : BHM. 150.2005, 5, p. 163-169 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    High Temperature properties and the crack susceptibility of new steel grades for automotive purposes

    Gigacher, G., Pierer, R. & Bernhard, C., 2005, Proc. Computational Methods and Experimental Measurements in Material Characterisation. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. 2004
  57. Published

    Common hot tearing criteria and experimental validation

    Pierer, R., Bernhard, C. & Chimani, C., 2004, In: Berg- und hüttenmännische Monatshefte : BHM. 149, p. 95-101

    Research output: Contribution to journal › Article › Research › peer-review

  58. 2003
  59. Published

    Heat Treatment and behaviour of new corrosion resistant plastic mould steels with regard to dimensional change

    Schneider, R., Pierer, R., Sammt, K. & Schützenhöfer, W., 2003, 4th International Conference on Quenching and Control of Distortion. p. 357-363

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. 2002
  61. Published

    The behaviour of two new tool steels regarding dimensional change

    Pierer, R., Schneider, R. & Hiebler, H., 2002, The behaviour of two new tool steels regarding dimensional change. p. 507-517

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (48)