Raul Bermejo

1 - 100 out of 219Page size: 100

Research output

  1. 2025
  2. Published

    Inter- and Transgranular Fracture in Ceramics with Tailored Microstructure

    Jabr, A., Salamon, D. & Bermejo Moratinos, R., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Research › peer-review

  3. Published

    Schadenstoleranz von 3D-gedruckten Keramiken mit eingestelltem Gefüge

    Schlacher, J., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 26 Feb 2025.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  4. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Understanding the lower fracture resistance of cold sintered ceramics

    Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Estimation of residual stresses in single crystal sapphire wafers through eigenmode analysis

    Gruber, M., Kreith, J., Lohrasbi, S., Bermejo, R. & Supancic, P. H., 9 Jan 2025, In: Scripta Materialia. 259.2025, 1 April, 5 p., 116538.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Contact damage response of alumina-based layered architectures under different loading configurations

    Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

    Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2024
  10. Published

    Towards high strength SrTiO3-based composites fabricated at room temperature

    Jabr, A., Kuzmić, N., Škapin, S. D., Jantunen, H., Nelo, M., Spreitzer, M. & Bermejo, R., Dec 2024, In: Journal of the European Ceramic Society. 44, 15, 116782.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Thermal shock resistant 3D-printed ceramic components through spatially tailored porosity

    Schlacher, J., Bastos Mateus, L., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 25 Sept 2024, In: Additive Manufacturing. 96, 104582.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Linear volumetric additive manufacturing of zirconia from a transparent photopolymerizable ceramic slurry via Xolography

    Sänger, J. C., König, N. F., De Marzi, A., Zocca, A., Franchin, G., Bermejo, R., Colombo, P. & Günster, J., Sept 2024, In: Open ceramics. 19, 100655.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion

    Papšík, R., Sevecek, O., Schlacher, J. & Bermejo Moratinos, R., May 2024, In: Engineering Fracture Mechanics. 303, 110121.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Towards 3D-printed alumina-based multi-material components with enhanced thermal shock resistance

    Schlacher, J. C., Geier, S., Schwentenwein, M. & Bermejo, R., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2294-2303 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The contribution of ceramography to the development of ceramic spark plug electrode materials for large gas engines

    Gruber, M., Melcher, V., Harrer, W. S., Tilz, A., Engelmayer, M., Fimml, W., Wimmer, A. & Bermejo, R., Jan 2024, In: Practical Metallography. 61.2024, 1, p. 4-15 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    3D-printed alumina-based ceramics with spatially resolved porosity

    Nohut, S., Schlacher, J., Kraleva, I., Schwentenwein, M. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 21.2024, 1, p. 89-104 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Ceramic materials as an alternative for conventional spark plug electrodes

    Harrer, W. S., Gruber, M., Melcher, V., Tilz, A., Engelmayer, M., Wimmer, A. & Bermejo, R., 2024, In: International journal of applied ceramic technology. 2024, ??? Stand: 30. September 2024, p. 4393-4403

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of airborne particle abrasion and regeneration firing on the strength of 3D-printed 3Y and 5Y zirconia ceramics

    Mirt, T., Kocjan, A., Hofer, A.-K., Schwentenwein, M., Ivekovic, A., Bermejo, R. & Jevnikar, P., 2024, In: Dental Materials. 40.2024, 1, p. 111-117 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    LITHOZ: Multi-Material 3D Printing

    Schwentenwein, M., Schlacher, J. & Bermejo Moratinos, R., 2024, In: Ceramic applications. 12, 1, p. 40-43

    Research output: Contribution to journal › Article › Transfer

  20. 2023
  21. Published

    Highly textured 3D-printed translucent alumina through pressure-assisted sintering

    Nečina, V., Hofer, A.-K., Bermejo, R. & Pabst, W., 12 Oct 2023, In: Open ceramics. 16.2023, December, 6 p., 100487.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Press-compaction-assisted binder jetting of textured ceramics

    Moghadasi, M., Mahdaviarab, A., Hofer, A. K., Bermejo, R., Pei, Z. & Ma, C., 23 Sept 2023, In: Ceramics International. p. 39214–39222

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Thermal shock behavior of 3D-printed alumina ceramics with spatially tailored porosity

    Bastos Mateus, L., Schlacher, J. C., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 31 Aug 2023.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

    Papšík, R., Ševeček, O., Hofer, A.-K., Kraleva, I. R., Kreith, J. & Bermejo, R., 1 Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2928-2934 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    CIEC17 – Community Editorial

    Jeffs, S., Bache, M., Chevalier, J., Anselmi-Tamburini, U., Bermejo, R. & Jiménez-Piqué, E., Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2725-2727 3 p.

    Research output: Contribution to journal › Editorial › peer-review

  26. Published

    High-temperature fracture behaviour of layered alumina ceramics with textured microstructure

    Schlacher, J. C., Chlup, Z., Hofer, A.-K. & Bermejo, R., Jul 2023, In: Journal of the European Ceramic Society. 43.2023, 7, p. 2917-2927 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Cold Sintering of Ceramics: Effect of liquid phase chemistry on densification and strength

    Jabr, A., Randall, C. A. & Bermejo Moratinos, R., 5 Jun 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Scaling up the cold sintering process of ceramics

    Jabr, A., Jones, H. N., Argüelles, A. P., Trolier-McKinstry, S., Randall, C. A. & Bermejo Moratinos, R., 30 May 2023, In: Journal of the European Ceramic Society. 43, 12, p. 5319-5329 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization

    Sänger, J. C., Schwentenwein, M., Bermejo, R. & Günster, J., Mar 2023, In: Applied Sciences (Switzerland). 13, 6, 3974.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramics

    Hofer, A.-K., Kraleva, I. R., Prötsch, T., Vratanar, A., Wratschko, M. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2935-2942

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Functionally Graded Ceramics by Lithography-Based Ceramic Manufacturing (LCM)

    Nohut, S., Geier, S., Kraleva, I., Schwentenwein, M. & Bermejo Moratinos, R., 2023, In: Journal of additive manufacturing technologies. 2, 1, p. 678

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Low-temperature fabrication of ceramics by the cold sintering process

    Jabr, A., Bermejo Moratinos, R., Guillon, O. & Randall, C. A., 2023, In: Ceramic forum international (CFI). 100, 4, p. E2-E5

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Micro-scale fracture toughness of textured alumina ceramics

    Schlacher, J., Csanádi, T., Vojtko, M., Papšík, R. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Prediction of ring crack initiation in ceramics and glasses using a stress–energy fracture criterion

    Papšík, R., Sevecek, O., Martin, E. & Bermejo Moratinos, R., 2023, In: Journal of the American Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Templated grain growth in rapid sintered 3D-printed alumina ceramics

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2023, In: Open ceramics. 15, 100428.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

    Jabr, A., Fanghanel, J., Zongming, F., Bermejo, R. & Randall, C. A., 2023, In: Journal of the European Ceramic Society. 43.2023, 4, p. 1531-1541 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2022
  38. Published

    Strategies to enhance structural properties of 3D-printed ceramics

    Hofer, A.-K., Schlacher, J. C., Schwentenwein, M. & Bermejo Moratinos, R., 16 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  39. Published

    Contact damage tolerance of alumina-based layered ceramics with tailored microstructures

    Schlacher, J., Jabr, A., Hofer, A. & Bermejo, R., 4 Apr 2022, In: Journal of the American Ceramic Society. p. 4387-4399

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

    Hofer, A. K., Rabitsch, J., Jutrzenka-Trzebiatowska, D., Hofstetter, C., Gavalda-Velasco, I., Schlacher, J., Schwentenwein, M. & Bermejo, R., 1 Jan 2022, In: International journal of applied ceramic technology. 19, 1, p. 174-180 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firing

    Mirt, T., Abram, A., van del Velde, N., Jerman, I., Bermejo, R., Kocjan, A. & Jevnikar, P., 2022, In: Journal of the European Ceramic Society. p. 5035-5044

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of crystal orientation on the hardness and strength of piezoelectric LiNbO3 substrates for microelectronic applications

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 2022, In: Materials and Design. 213, 110306.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    High-strength lithography-based additive manufacturing of ceramic components with rapid sintering

    Hofer, A.-K., Kocjan, A. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing. 103141.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Lithography-based additive manufacturing of porosity graded alumina

    Nohut, S., Geier, S., Kraleva, I. R., Schwentenwein, M. & Bermejo Moratinos, R., 2022, In: Additive Manufacturing Letters. 3, 100060.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Multifunctional performance of Ti2AlC MAX phase/2D braided alumina fiber laminates

    Gonzales-Julian, J., Kraleva, I. R., Belmonte, M., Jung, F., Gries, T. & Bermejo Moratinos, R., 2022, In: Journal of the American Ceramic Society. 105, p. 102-130

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

    Lube, T., Staudacher, M., Hofer, A.-K., Schlacher, J. & Bermejo Moratinos, R., 2022, In: Advanced engineering materials. 2200520.

    Research output: Contribution to journal › Article › Research › peer-review

  47. 2021
  48. Published

    Enhancing contact damage tolerance through layered design and textured microstructure

    Jabr, A., Schlacher, J. C. (Co-editor) & Bermejo Moratinos, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Micro-scale fracture toughness of textured alumina grains and grain boundaries

    Schlacher, J. C., Csanádi, T. (Co-editor), Vojtko, M. (Co-editor), Papšík, R. (Co-editor) & Bermejo Moratinos, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Modelling of edge and tunnelling cracks initiation in ceramic laminates using the stress-energy criterion

    Papšík, R., Ševeček, O. (Co-editor), Hofer, A.-K. (Co-editor), Kraleva, I. (Co-editor) & Bermejo, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Effects of acid leaching treatment of soda lime silicate glass on crack initiation and fracture

    Sheth, N., Greenly, C., Bermejo, R., Mauro, J. C., Pantano, C. G. & Kim, S. H., Sept 2021, In: Journal of the American Ceramic Society. 104.2021, 9, p. 4550-4558 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Mechanical failure dependence on the electrical history of lead zirconate titanate thin films

    Coleman, K., Ritter, M., Bermejo, R. & Trolier-McKinstry, S., Apr 2021, In: Journal of the European Ceramic Society. 41, 4, p. 2465-2471 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Additive manufacturing of highly textured alumina ceramics

    Hofer, A.-K., Kraleva, I. & Bermejo, R., Mar 2021, In: Open ceramics. 5, 100085.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Additive manufacturing of high-strength alumina through a multi-material approach

    Schlacher, J., Hofer, A.-K., Geier, S., Kraleva, I. R., Papšík, R., Schwentenwein, M. & Bermejo, R., Mar 2021, In: Open ceramics. 5, 100082.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Preparation and photocatalytic activity of TiO2 nanotube arrays prepared on transparent spinel substrate

    Petrisková, P., Monfort, O., Satrapinskyy, L., Dobročka, E., Plecenik, T., Plesch, G., Papšík, R., Bermejo, R. & Lenčéš, Z., 20 Jan 2021, In: Ceramics International. 47.2021, 9, p. 12970-12980 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Fabrication of 3D metal-ceramic (Al-AlN) architectures using laser-powder bed fusion process

    Wallis, C., Buchmayr, B., Bermejo, R. & Supancic, P., 2021, In: Additive Manufacturing. 38.2021, February, 14 p., 101799.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Subcritical Crack Growth: Modeling of the v–K Curve in Different Environments

    Bermejo, R., 2021, Encyclopedia of Materials: Technical Ceramics and Glasses. Oxford: Elsevier, Vol. 1. p. 811-817

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  58. 2020
  59. Published

    A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

    Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Mechanical properties of zirconia ceramics biomimetically coated with calcium deficient hydroxyapatite

    Macan, J., Dutour Sikiric, M., Deluca, M., Bermejo, R., Baudín, C., Plodinec, M., Salamon, K., Ceh, M. & Gajovic, A., Nov 2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 104006.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Thickness Dependence of crack initiation and propagation in stacks for piezoelectric microelectromechanical systems

    Coleman, K., Bermejo, R., Leguillon, D. & Trolier-McKinstry, S., Jun 2020, In: Acta Materialia. 191, p. 245-252

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Strength of additive manufactured alumina

    Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Design of damage tolerant and crack-free layered ceramics with textured microstructure

    Hofer, A. K., Walton, R., Ševeček, O., Messing, G. L. & Bermejo, R., 1 Feb 2020, In: Journal of the European Ceramic Society. 40, 2, p. 427-435 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Microstructure, ionic conductivity and mechanical properties of tape-cast Li1.5Al0.5Ti1.5P3O12 electrolyte sheets

    Dashjav, E., Gellert, M., Yan, G., Grüner, D., Kaiser, N., Spannenberger, S., Kraleva, I., Bermejo, R., Gerhards, M. T., Ma, Q., Malzbender, J., Roling, B., Tietz, F. & Guillon, O., 1 Jan 2020, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Influence of acid leaching surface treatment on indentation cracking of soda lime silicate glass

    Sheth, N., Hahn, S. H., Ngo, D., Howzen, A., Bermejo, R., van Duin, A. C. T., Mauro, J. C., Pantano, C. G. & Kim, S. H., 2020, In: Journal of non-crystalline solids. 543, 8 p., 120144.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Influence of the test configuration and temperature on the mechanical behaviour of WC-Co

    González, L. M., Chicardi, E., Gotor, F. J., Bermejo, R., Llanes, L. & Torres, Y., 2020, In: Metals : open access journal . 10, 3, 322.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Montanuniversität Leoben: Der Lehrstuhl für Struktur- und Funktionskeramik

    Danzer, R. & Bermejo, R., 2020, In: Ceramic forum international (CFI). 97, 5-6, p. D1-D3

    Research output: Contribution to journal › Letter

  68. 2019
  69. Published

    Enhanced thermal shock response of Al 2 O 3 –graphite composites through a layered architectural design

    Song, J., Yang, H., Bermejo, R., Qu, J., Hu, L. & Zhang, Y., 14 Jun 2019, In: Journal of the American Ceramic Society. 102.2019, 6, p. 3673-3684 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Mechanical strength of cold-sintered zinc oxide under biaxial bending

    Lowum, S., Floyd, R., Bermejo, R. & Maria, J. P., 30 Mar 2019, In: Journal of materials science. 54, 6, p. 4518-4522 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Strength limits in mesoscaled 3Y-TZP ceramics for micro-surgical instruments

    Antolino, N., Muhlstein, C., Hayes, G., Adair, J. & Bermejo, R., 1 Mar 2019, In: Journal of the Mechanical Behavior of Biomedical Materials. 91, p. 99-108 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. 2018
  73. Published

    Understanding the tensile strength of ceramics in the presence of small critical flaws

    Martin, E., Leguillon, D., Sevecek, O. & Bermejo, R., 1 Oct 2018, In: Engineering Fracture Mechanics. 201, p. 167-175 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Incipient plasticity and surface damage in LiTaO3 and LiNbO3 single crystals

    Gruber, M., Leitner, A., Kiener, D., Supancic, P. & Bermejo, R., 5 Sept 2018, In: Materials and Design. 153, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

    Leguillon, D., Martin, E., Sevecek, O. & Bermejo, R., 1 Jul 2018, In: International Journal of Fracture. 212, 1, p. 89-103 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Improved fracture behavior and mechanical properties of alumina textured ceramics

    Zhang, M., Chang, Y., Bermejo, R., Jiang, G., Sun, Y., Wu, J., Yang, B. & Cao, W., 15 Jun 2018, In: Materials letters. 221, p. 252-255 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Influence of temperature on the biaxial strength of cemented carbides with different microstructures

    Chicardi, E., Bermejo, R., Gotor, F. J., Llanes, L. & Torres, Y., 2018, In: International journal of refractory metals & hard materials. 71, p. 82-91 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Mechanical characterization of Ti(C,N)-based cermets fabricated through different colloidal processing routes

    Dios, M., Kraleva, I., González, Z., Alvaredo, P., Ferrari, B., Gordo, E. & Bermejo, R., 2018, In: Journal of alloys and compounds. 732, p. 806-817 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. 2017
  83. Published

    Strength distribution and fracture analyses of LiNbO3 and LiTaO3 single crystals under biaxial loading

    Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    “Toward seashells under stress”: Bioinspired concepts to design tough layered ceramic composites

    Bermejo, R., 23 May 2017, In: Journal of the European Ceramic Society. 37, 13, p. 3823-3839 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Fracture of advanced ceramics and brittle components: Experimental observations

    Bermejo, R., 1 Jan 2017, p. 679-680. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  86. Published

    Modelling of fracture in brittle solids using FEM and finite fracture mechanics

    Ševecek, O., Kotoul, M., Leguillon, D., Martin, E. & Bermejo, R., 1 Jan 2017, p. 928-929. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  87. Published

    Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

    Gruber, M., Supancic, P., Aldrian, F. & Bermejo, R., 2017, In: Journal of the European Ceramic Society.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Influence of the colloidal processing route on the mechanical properties of Ti(C,N)-based cermets

    de Dios, M., Gonzales, Z., Ferrari, B., Kraleva, I., Bermejo, R., Alvaredo, P. & Gordo, E., 2017

    Research output: Non-textual form › Web publication/site › Research

  89. Published

    Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

    Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Novel colloidal approach for the microstructural improvement in Ti(C,N)/FeNi cermets

    Dios, M., González, Z., Alvaredo, P., Bermejo, R., Gordo, E. & Ferrari, B., 2017, In: Journal of alloys and compounds. 724, 2017, p. 327-338 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2017, Solid State Phenomena . Vol. 258. p. 178-181 4 p. (Solid State Phenomena).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  92. Published

    Texture-engineered ceramics - Property enhancements through crystallographic tailoring

    Messing, G. L., Poterala, S., Chang, Y., Frueh, T., Kupp, E. R., Watson, B. H., Walton, R. L., Brova, M. J., Hofer, A.-K., Bermejo, R. & Meyer, R. J., 2017, In: Journal of materials research (JMR). 32, 17, p. 3219-3241 23 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. 2016
  94. Published

    Hierarchical Architectures to Enhance Structural and Functional Properties of Brittle Materials

    Bermejo, R., Daniel, R., Schuecker, C., Paris, O., Danzer, R. & Mitterer, C., 26 Dec 2016, In: Advanced engineering materials. 19, 4, 15 p., 1600683.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion

    Ševeček, O., Kotoul, M., Leguillon, D., Martin, E. & Bermejo, R., 1 Jan 2016, In: Procedia Structural Integrity. 2, p. 2014-2021 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

    Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Evaluation of Mechanical Strength of Miniaturized Functional Substrates and Components in Different Environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 2016, In: Journal of Microelectronics and Electronic Packaging. 13, 1, p. 17-22 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Mechanical properties of tape casted Lanthanum Tungstate for membrane substrate application

    Stournari, V., Deibert, W., Ivanov, M. E., Krautgasser, C., Bermejo, R. & Malzbender, J., 2016, In: Ceramics International : CI. 42, 14, p. 15177-15182 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Modelling of edge crack formation and propagation in ceramic laminates using the stress-energy coupled criterion

    Sevecek, O., Kotoul, M., Leguillon, D. P., Martin, E. & Bermejo, R., 2016, In: Engineering Fracture Mechanics. 167, p. 45–55

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Residual lifetime determination of low temperature co-fired ceramics

    Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2016, Advances in Fracture and Damage Mechanics XV. Trans Tech Publications, Vol. 713. p. 266-269 4 p. (Key Engineering Materials; vol. 713).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

    Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. 2015
  103. Published

    Thermography and complementary measurements as tools to detect micro-irregularities in electronic components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., Dec 2015, In: Journal of ceramic science and technology. 6, 4, p. 255-260 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Mechanical testing and fracture analyses of miniaturized ZnO-based multilayer components

    Macurova, K., Gruber, M., Pletz, M., Supancic, P., Danzer, R., Aldrian, F. & Bermejo, R., 26 Oct 2015

    Research output: Other contribution › Research

  105. Published

    Comparison of Different Methods for Stress and Deflection Analysis in Embedded die Packages during the Assembly Process

    Macurova, K., Bermejo, R., Pletz, M., Schöngrundner, R., Antretter, T., Krivec, T., Morianz, M., Brizoux, M. & Lecavelier, A., 1 Apr 2015, In: Journal of Microelectronics and Electronic Packaging. 12.2015, 2, p. 80-85 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Heat development at the microscale in ceramic components - thermography and complementary tools

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 1 Apr 2015

    Research output: Other contribution › Research

  107. Published

    Mechanical characterization of miniaturized functional substrates and components in different environments

    Bermejo, R., Krautgasser, C., Deluca, M., Pletz, M., Supancic, P., Aldrian, F. & Danzer, R., 1 Apr 2015

    Research output: Other contribution › Research

  108. Published

    Application of the coupled stress-energy criterion to predict the fracture behavior of layered ceramics designed with internal compressive stresses.

    Leguillon, D. P., Martin, E., Sevecek, O. & Bermejo, R., 2015, In: European Journal of Mechanics - A/Solids. 54, p. 94-104 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Design of alumina-zirconia composites with spatially tailored strength and toughness

    Chang, Y., Bermejo, R., Sevecek, O. & Messing, G. L., 2015, In: Journal of the European Ceramic Society. 35, p. 631-640

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Edge cracking due to a compressive residual stress in ceramic laminates

    Leguillon, D. P., Sevecek, O., Martin, E. & Bermejo, R., 2015, In: Comptes rendus mécanique .

    Research output: Contribution to journal › Article › Research › peer-review

  111. Published

    Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Mark, T., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 275, p. 217-226

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 4100

Latest Research Output

View more (219)