Gregor Karl Mori

Research output

  1. 2021
  2. Published

    Corrosion of Stainless Steel by Urea at High Temperature

    Galakhova, A., Kadisch, F., Mori, G. K., Heyder, S., Wieser, H., Sartory, B. & Burger, S., 30 Aug 2021, In: Corrosion and materials degradation. 2.2021, 3, p. 461-473 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  3. E-pub ahead of print

    Effect of Varying H2S Content on High-Temperature Corrosion of Ferritic and Austenitic Alloys in a Simulated Pyrolysis Process of Post-Consumer Plastics

    Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 29 Jun 2021, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 9, p. 424-433 10 p.

    Research output: Contribution to journalArticleResearch

  4. Published

    Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere

    Nimmervoll, M., Schmid, A., Mori, G. K., Hönig, S. & Haubner, R., 1 Apr 2021, In: Corrosion science. 181.2021, 1 April, 11 p., 109241.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Behavior of high-temperature corrosion resistant alloys in HCl and H2S containing atmospheres

    Nimmervoll, M., Mori, G. K., Hönig, S. & Haubner, R., 2021.

    Research output: Contribution to conferencePosterResearchpeer-review

  6. Published

    Galvanic corrosion of molybdenum alloys and oxides in contact with copper for thin film transistors using evans diagrams

    Riedl, J., Mori, G., Schmidt, H. & Köstenbauer, H., 2021, In: Digest of technical papers. 52, S2, p. 588-590 3 p.

    Research output: Contribution to journalConference articlepeer-review

  7. 2020
  8. Published

    Cathodic and Anodic Stress Corrosion Cracking of a New High-Strength CrNiMnMoN Austenitic Stainless Steel

    Truschner, M., Deutsch, J., Mori, G. K. & Keplinger, A., 19 Nov 2020, In: Metals : open access journal . 10.2020, 11, 12 p., 1541.

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Metallographic Documentation of the Degradation of Iron and Nickel Based Alloys in HCl and H2S Containing Environments, between 480 – 680 °C

    Schmid, A., Mori, G. K. & Haubner, R., 16 Nov 2020, Defect and diffusion forum. 405 ed. Vol. 2020. p. 26-32 7 p. (Defect and diffusion forum (Online-Ressource) ).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  10. Published

    Hochtemperaturkorrosion an Stählen und Nickelbasislegierungen in HCl und H2S haltiger Mischgasatmosphäre

    Haubner, R., Nimmervoll, M., Schmid, A. & Mori, G. K., 4 Nov 2020, Tagungsband 3-Länder-Korrosionstagung. Frankfurt/Main, 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Depassivation and repassivation of stainless steels by stepwise pH change

    Mujanović, E., Zajec, B., Legat, A., Kosec, T., Kovač, J., Mori, G., Hönig, S. & Zehethofer, G., 2 Oct 2020, In: Materials and Corrosion. 72.2021, 3, p. 421-433 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  12. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Resistance to stress corrosion cracking of a new high strength stainless steel wire material

    Truschner, M., Trautmann, A. (Co-editor), Deutsch, J. (Co-editor), Mori, G. K. (Co-editor) & Keplinger, A. (Co-editor), 7 Sept 2020.

    Research output: Contribution to conferencePosterResearch

  14. Published

    Hydrogen Uptake and Embrittlement of Carbon Steels in Various Environments

    Trautmann, A., Mori, G., Oberndorfer, M., Bauer, S., Holzer, C. & Dittmann, C., 14 Aug 2020, In: Materials. 13.2020, 16, 16 p., 3604.

    Research output: Contribution to journalArticleResearchpeer-review

  15. Published

    Effect of Polishing on Electrochemical Behavior and Passive Layer Composition of Different Stainless Steels

    Rokosz, K., Solecki, G., Mori, G., Fluch, R., Kapp, M. & Lahtinen, J., 1 Aug 2020, In: Materials. 13.2020, 15, 12 p., 3402.

    Research output: Contribution to journalArticleResearchpeer-review

  16. Published

    Hydrogen Uptake of Duplex 2205 at H2 Partial Pressures up to 100 bar

    Trautmann, A., Mori, G. K., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., Jan 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 1, p. 40-45 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  17. 2019
  18. Published

    Activation and Repassivation of Stainless Steels in Artificial Brines as a Function of pH

    Mujanovic, E., Zajec, B., Kosec, T., Legat, A., Hönig, S., Zehethofer, G. & Mori, G., 20 Nov 2019, In: Materials. 12.2019, 23, 11 p., 3811.

    Research output: Contribution to journalArticleResearchpeer-review

  19. Published

    Hydrogen Uptake of Duplex 2205 at H2 partial pressures up to 100 bar

    Trautmann, A., Mori, G., Siegl, W., Truschner, M., Pfeiffer, J., Kapp, M., Keplinger, A., Oberndorfer, M. & Bauer, S., 30 Sept 2019, p. 338-345. 8 p.

    Research output: Contribution to conferencePaperpeer-review

  20. Published

    Hydrogen charging of Armco Iron and L80 Steel in various electrolytes

    Truschner, M., Trautmann, A., Siegl, W. & Mori, G. K., 9 Sept 2019.

    Research output: Contribution to conferencePosterResearch

  21. Published

    High Temperature Corrosion of Steel X15CrNiSi25-21 (1.4841) in a Mixed Gas Atmosphere – Sample Preparation and Damage Mechanism

    Schmid, A., Mori, G., Hönig, S., Strobl, S. & Haubner, R., 3 Jul 2019, In: Praktische Metallographie/Practical Metallography. 56.2019, 7, p. 457-468 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  22. Published

    Hydrogen trapping in heat treated and deformed Armco iron

    Siegl, W., Mori, G. K., Ecker, W., Klarner, J., Klösch, G., Winter, G., Schnideritsch, H. & Drexler, A., 24 Mar 2019. 12 p.

    Research output: Contribution to conferencePaper

  23. Published
  24. Published

    The influence of NaCl and CaCl2 induced high temperature corrosion on the aqueous corrosion resistance of stainless steels

    Mori, G., Vidic, K. J., Bucher, E., Yasir, M., Hornauer, D., Nachtnebel, M., Fitzek, H. & Schroettner, H., 20 Feb 2019, In: Materials and Corrosion. 70.2019, 6, p. 1071-1086 16 p.

    Research output: Contribution to journalArticleResearchpeer-review

  25. 2018
  26. Published

    Model about the course of corrosion reactions of austenitic steels in a H2S, HCl and CO2 containing atmosphere at 680°C

    Schmid, A., Mori, G. K., Bucher, E. & Haubner, R., 19 Oct 2018, In: Oxidation of metals. 91.2018, 14 February, 10 p., https://doi.org/10.1007/s11085-018-9876-z.

    Research output: Contribution to journalArticleResearchpeer-review

  27. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G. K., Haubner, R. & Hönig, S., 10 Sept 2018.

    Research output: Contribution to conferencePresentationResearch

  28. Published

    Contribution to the Understanding of Hydrogen Trapping in Armco Iron

    Siegl, W., Mori, G. K. & Zauchner, T., 29 May 2018.

    Research output: Contribution to conferencePosterResearch

  29. Published

    Comparison of the high-temperature chloride-induced corrosion between duplex steel and Ni based alloy in presence of H2S

    Schmid, A., Mori, G. K., Hönig, S., Weil, M., Strobl, S. & Haubner, R., 5 May 2018, In: Corrosion science. 139, 15 July 2018, p. 76 - 82 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    NaCl and CaCl2-induced high temperature corrosion of automotive exhaust components

    Vidic, K. & Mori, G. K., 15 Apr 2018, p. 1-15. 15 p.

    Research output: Contribution to conferencePaperpeer-review

  31. Published

    Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 – 680 °C

    Schmid, A., Mori, G. K., Haubner, R., Weil, M. & Hönig, S., 27 Feb 2018, In: Materials and Corrosion. DOI: 10.1002/maco.201709992, p. 1328 - 1337

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen

    Schmid, A., Mori, G. K., Strobl, S. & Haubner, R., 18 Jan 2018, In: Practical metallography = Praktische Metallographie. Vol. 55, 4, p. 244-253

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process

    Schmid, A., Mori, G., Hönig, S. & Haubner, R., 1 Jan 2018, European Corrosion Congress, EUROCORR 2018. p. 44-58 15 p. (European Corrosion Congress, EUROCORR 2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. 2017
  35. Published

    Depletion zones and intergranular corrosion of superaustenitic stainless steel Alloy 926

    Mori, G. K., Prohaska, M., Lackner, R., Rokosz, K., Albu, M. & Kothleitner, G., 1 Mar 2017, In: Materials and Corrosion. 68.2017, 3, p. 284-294 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Corrosion of various Fe and Ni based alloys in HCl, H2S containing environments, with low oxygen partial pressure, at 680 °C

    Alexander, S., Mori, G., Strobl, S., Haubner, R. & Hönig, S., 1 Jan 2017.

    Research output: Contribution to conferencePaperpeer-review

  37. Published

    UNS S31400 stainless steel as reactor material in a thermal cracking process

    Schmid, A. & Mori, G., 1 Jan 2017, Corrosion Conference and Expo 2017. p. 3053-3062 10 p. (NACE - International Corrosion Conference Series; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. 2016
  39. Published

    Corrosion Behavior Influenced by Quenching Conditiones of HTGN Martensitic Stainless Steel

    Borchert, M., Mori, G., Kozeschnik, E., Povoden-Karadeniz, E., Bischof, M. & Tomandl, A., 28 Sept 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  40. Published

    Hydrogen embrittlement of high strength steel under in situ corrosive charging conditions and tensile load

    Scharf, R., Muhr, A., Stellnberger, K.-H., Faderl, J., Holzer, C. & Mori, G. K., 21 Jun 2016, In: Materials and Corrosion. 68.2017, 1, p. 95-104 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Aufstickung und Korrosionsverhalten martensitischer rostfreier Stähle

    Borchert, M. & Mori, G., 11 May 2016.

    Research output: Contribution to conferencePresentationResearch

  42. Published

    Spannungsrisskorrosionsprüfung von Hochfesten Stählen in der Befestigungstechnik

    Borchert, M., Mori, G., Bischof, M. & Tomandl, A., 8 Apr 2016.

    Research output: Contribution to conferencePosterResearch

  43. Published

    Hydrogen embrittlement of DP-1000 flat steel sheet: Influence of mechanical properties, specimen geometry, pre-damaging and electrolytically zinc galvanizing

    Scharf, R., Muhr, A., Luckeneder, G. H., Larour, P., Mraczek, K., Rehrl, J., Leomann, F., Stellnberger, K.-H., Faderl, J. & Mori, G. K., 1 Mar 2016, In: Materials and Corrosion. 67.2016, 3, p. 239-250 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Influence of different types of localized corrosion on the fatigue behavior of an austenitic stainless steel

    Visser, A., Mori, G., Pippan, R., Kapp, M., Fluch, R., Leitner, H., Panzenböck, M. & Holper, B., 1 Jan 2016, NACE International - Corrosion Conference and Expo 2016. p. 3201-3210 10 p. (NACE - International Corrosion Conference Series; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  45. Published

    3D Atom Probe Characterisation of Passive Layers on Stainless Steels

    Mori, G., Visser, A., Turk, C., Mendez Martin, F., Kapp, M., Fluch, R. & Leitner, H., 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  46. Published

    Die Angst des Maschinenbauers vor der Chemie

    Mori, G., 2016.

    Research output: Contribution to conferencePresentationEducation

  47. Published

    EVALUATION OF PERFORMANCE OF AN AMINE BASED AND AN IMIDAZOLINE BASED GAS AND GAS CONDENSATE INHIBITOR

    Mori, G., 2016.

    Research output: Contribution to conferencePresentationResearchpeer-review

  48. Published

    Improvement of oxidation and corrosion resistance of Mo thin films by alloying with Ta

    Hofer-Roblyek, A. M., Mori, G., Fian, A., Winkler, J. & Mitterer, C., 2016, In: Thin solid films. 599, p. 1-6 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Spannungsrisskorrosion an Türhaltern aus hochfestem Aluminium

    Mori, G., 2016.

    Research output: Contribution to conferencePresentationResearch

  50. 2015
  51. Published

    Effect of high temperature nitrding on corrosion properties of martensitic stainless steels

    Borchert, M. & Mori, G., 4 Sept 2015.

    Research output: Contribution to conferencePresentationResearch

  52. Published

    Evaluation of Performance of an Amine Based and an Imidazoline Based Gas Condensate Inhibitor Tested with a High Velocity Laboratory Test Rig

    Prethaler, A., Mori, G. & Rosenberg, E., 2 Jul 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 7, p. 346-351 6 p.

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    Evaluation of Performance of an Amine Based and an Imidazoline Based Gas and Gas Condensate Inhibitor Tested With High Velocity Laboratory Test Rig

    Prethaler, A., Mori, G., Havlik, W., Zehethofer, G., Hönig, S., Rosenberg, E. & Rückemann, M., 15 Mar 2015, p. Paper Number: NACE-2015-5713. 12 p.

    Research output: Contribution to conferencePaperpeer-review

  54. Published

    Assessing hydrogen susceptibility of press-hardened & high strength steels using various testing methods

    Muhr, A., Kolnberger, S., Zwettler, F., Luckeneder, G., Faderl, J., Stellnberger, K. H., Mori, G. & Kurz, T., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Published

    Corrosion in a thermal cracking process

    Schmid, A. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Published

    Corrosion resistance of hot-dip galvanised steel in soils

    Ziebermayr, S., Fleischanderl, M., Stellnberger, K. H., Linhardt, P. & Mori, G., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Published

    Influence of different heat treatments on sensitization of alloy 625

    Mori, G., Lackner, R., Winter, F., Rinner, H. & Egger, R., 1 Jan 2015, European Corrosion Congress, EUROCORR 2015. ASMET, 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution