Gerhard Dehm
(Former)
Research output
- 2011
- Published
Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars
Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ TEM heating study of the y lamellae formation inside the alpha2 matrix of a Ti-45Al-7.5Nb alloy
Cha, L., Clemens, H., Dehm, G. & Zhang, Z., 2011, In: Advanced materials. 146-147, p. 1365-1368Research output: Contribution to journal › Article › Research › peer-review
- Published
In situ µLaue: Instrumental setup for the deformation of micron sized samples
Kirchlechner, C., Keckes, J., Micha, J.-S. & Dehm, G., 2011, In: Advanced engineering materials. 13, p. 837-844Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure and adhesion of as-deposited and annealed Cu/Ti films on polyimide
Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 729-734Research output: Contribution to journal › Article › Research › peer-review
- Published
Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperature
Cha, L., Clemens, H. & Dehm, G., 2011, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 703-708Research output: Contribution to journal › Article › Research › peer-review
- Published
Physical Metallurgy and Properties of ß-solidifying TiAl Based Alloys
Clemens, H., Schmölzer, T., Schloffer, M., Schwaighofer, E., Mayer, S. & Dehm, G., 2011, Materials Research Society symposium proceedings Volume 1295. Materials Research Society : MRS, p. 95-100Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
The effect of film thickness variations in peridic cracking: Analysis and experiments
Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1830-1836Research output: Contribution to journal › Article › Research › peer-review
- Published
The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu
Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, In: Surface & coatings technology. 206, p. 1855-1859Research output: Contribution to journal › Article › Research › peer-review
- Published
Work hardening in micropillar compression: In situ experiments and modeling
Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, In: Acta materialia. 59, p. 3825-3840Research output: Contribution to journal › Article › Research › peer-review
- Published
µLaue: Compression studies on miniaturised Copper single crystals
Kirchlechner, C., Kapp, M., Motz, C., Grosinger, W., Keckes, J., Micha, J.-S., Ulrich, O. & Dehm, G., 2011.Research output: Contribution to conference › Poster › Research › peer-review
