Ewald Fauster

1 - 50 out of 129Page size: 50

Research output

  1. 2025
  2. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

    May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    INFLUENCE OF FLUID PROPERTIES ON TRANSVERSE FABRIC COMPRESSIBILITY DURING IN-SITU IMPREGNATION

    Bender, M. & Fauster, E., 5 Jul 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 3 - Material and Structural Behavior – Simulation & Testing. 1 ed. Nantes, Vol. 3. p. 1140 - 1147 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure

    Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

    Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Circular Economy Potential of Sustainable Bio-Based Composites: Repair, Recycle and Reuse

    Ravindran, B. & Fauster, E., 2024.

    Research output: Contribution to conference › Poster › Research

  12. Published

    INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL

    Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. 2023
  14. E-pub ahead of print

    Experimental validation of a new adaptable LCM mold filling software

    Obertscheider, C., Fauster, E. & Stieber, S., 12 Dec 2023, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 19 p., 2282310.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

    Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Inferring material properties from FRP processes via sim-to-real learning

    Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Abstract › peer-review

  18. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Presentation › Research

  19. Published

    RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method

    Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2022
  21. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Compressibility and Relaxation Characteristics of Bindered Non-Crimp-Fabrics Under Temperature and Injection Fluid Influence

    Bender, M. & Fauster, E., 29 Aug 2022, Proceedings of the Munich Symposium on Lightweight Design 2021: Tagungsband zum Münchner Leichtbauseminar 2021. 1 ed. Heidelberg: Springer Vieweg, p. 44-58 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    DETERMINATION OF A RACETRACKING PASS-FAIL CRITERION FOR EDGE FLOW PERMEABILITY MEASUREMENT

    George, A., Huntsman, M., Koorevaar, A., Fauster, E. & May, D., 2022, Characterization. Vassilopoulos, A. P. & Michaud, V. (eds.). p. 733-740 8 p. (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    EXPERIMENTAL CHARACTERIZATION OF TRANSVERSE FABRIC COMPRESSIBILITY BY MEANS OF IN-SITU-IMPREGNATION

    Bender, M. & Fauster, E., 2022.

    Research output: Contribution to conference › Paper

  25. 2021
  26. Published

    Instrumentation of an Inspection Test Rig for Geometry Measurement of Fiber Bundles in Automated Composite Manufacturing

    Neunkirchen, S., Fauster, E., Lehner, S. & O'Leary, P., 13 Dec 2021, In: IEEE transactions on instrumentation and measurement. 71

    Research output: Contribution to journal › Special issue › Research › peer-review

  27. Published

    Methodenentwicklung zur kohärenten Charakterisierung bebinderter Verstärkungstextilen bei erhöhter Temperatur

    Bender, M. & Fauster, E., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

    Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., Sept 2021, In: Composites Part A: Applied Science and Manufacturing. 148.2021, September, 16 p., 106480.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Instrumentation of a Roving Inspection Test Rig with Surface Geometry Measurement of Fiber Bundles

    Lehner, S., Neunkirchen, S., Fauster, E. & O'Leary, P., 17 May 2021, I2MTC 2021 - IEEE International Instrumentation and Measurement Technology Conference, Proceedings. IEEE Xplore (online): Institute of Electrical and Electronics Engineers, 9459889. (Conference Record - IEEE Instrumentation and Measurement Technology Conference; vol. 2021-May).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    PermeabilityNets: Comparing Neural Network Architectures on a Sequence-to-Instance Task in CFRP Manufacturing

    Stieber, S., Schroter, N., Fauster, E., Schiendorfer, A. & Reif, W., 2021, Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021. Wani, M. A., Sethi, I. K., Shi, W., Qu, G., Raicu, D. S. & Jin, R. (eds.). Institute of Electrical and Electronics Engineers, p. 694-697 4 p. (Proceedings - 20th IEEE International Conference on Machine Learning and Applications, ICMLA 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. 2020
  35. Published

    Experimental characterisation of textile compaction response: a benchmark exercise

    Young, A., Aktas, A., May, D., Endruweit, A., Lomov, S. V., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allaoui, S., Allen, T., Berg, D. C., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S. & Danzi, M. & 30 others, Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., George, A., Gillibert, J., Govignon, Q., Graupner, R., Grishaev, V., Guilloux, A., Kabachi, M. A., Keller, A., Kind, K., Large, D., Laspalas, M., Lebedev, O. V. L., Lizaranzu, M., Long, A. C., López, C., Masania, K., Michaud, V., Middendorf, P., Mitschang, P., van Oosterom, S., Schubnel, R., Sharp, N., Sousa, P., Trochu, F., Umer, R. & Wang, J. H., Dec 2020, In: Composites Part A: Applied Science and Manufacturing.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Elliptic paraboloid flow front modelling for in-plane permeability characterization of textile fabrics by the radial flow technique

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. 2019
  39. E-pub ahead of print

    A reference specimen for compaction tests of fiber reinforcements

    May, D., Kühn, F., Etchells, M., Fauster, E., Endruweit, A. & Lira, C., 13 Dec 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 4, p. 230-233 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics

    Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  45. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  48. 2018
  49. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Experimental characterization of single ply out-of-plane permeability through gaseous flow

    Fauster, E., Vierkötter, C., Appel, L., Lugo, J., Schijve, W. & Heider, D., Sept 2018, In: Polymer Composites. 39.2018, 9, p. 3247-3258 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Real-time tensor polynomial approximation of crosshatch measured geometric surface data

    Harker, M., O'Leary, P., Plessing, L., Hergan, P. & Fauster, E., 10 Jul 2018, I2MTC 2018 - 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement, Proceedings. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. E-pub ahead of print

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 2708

Latest Research Output

View more (129)