Daniel Kiener

1 - 50 out of 336Page size: 50

Research output

  1. 2025
  2. Published

    3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks

    Jelinek, A., Neumüller, D., Gammer, C., Eckert, J. & Kiener, D., Apr 2025, In: Materials and Design. 252, 113809.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Processing of Nanocrystalline Inconel 718—Graphite Composites by High-Pressure Torsion

    Kasalo, M., Suarez, S., Keckes, J. F., Kiener, D. & Bachmaier, A., Apr 2025, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 56, 6, p. 1461–1476

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Novel ambient-condition solid-state synthesis route of nanocrystalline TiN thin films via spark plasma ablation deposition

    Radovanović-Perić, F., Burtscher, M., Panžić, I., Kiener, D. & Mandić, V., Feb 2025, In: Ceramics International. 51, 5, p. 5576-5582 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Phase stability and enhanced mechanical properties of nanocrystalline PVD CrCu coatings

    Burtscher, M., Kainz, C., Dorner, P., Fellner, S., Terziyska, V., Alfreider, M. & Kiener, D., 8 Jan 2025, In: Journal of Materials Research and Technology. 35.2025, March-April, p. 369-378 10 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2024
  8. Published

    Publisher Correction: Nanomechanical characterization (MRS Bulletin, (2023), 10.1557/s43577-023-00643-z)

    Kiener, D. & Misra, A., Dec 2024, In: MRS Bulletin. 49.2024, March, 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  9. Published

    Assessing the fracture toughness in Tungsten-based nanocomposites: A micro-mechanical approach

    Schmuck, K. S., Burtscher, M., Alfreider, M. & Kiener, D., 6 Nov 2024, In: Materials and Design. 247.2024, November, 11 p., 113433.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysis

    Shi, X., Misch, D., Skerbisch, L., Sachsenhofer, R. F., Žák, S., Cordill, M. & Kiener, D., Nov 2024, In: Marine and petroleum geology. 169.2024, November, 16 p., 107083.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Editorial for the Special Issue on the Occasion of Reinhard Pippan's 70th Birthday: Celebrating a Legacy of Innovation and Excellence in Material Science

    Kiener, D. & Hohenwarter, A., Oct 2024, In: Advanced Engineering Materials. 26.2024, 19, 4 p., 2401772.

    Research output: Contribution to journal › Editorial › peer-review

  12. Published

    Strain Field Around Individual Dislocations Controls Failure

    Gammer, C., Issa, I., Minor, A. M., Ritchie, R. O. & Kiener, D., 6 Sept 2024, In: Small Methods. 8.2024, 12, 7 p., 2400654.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Unraveling the orientation-dependent mechanics of dental enamel in the red-necked wallaby

    Wilmers, J., Wurmshuber, M., Gescher, C., Graupp, C. M., Kiener, D. & Bargmann, S., 1 Sept 2024, In: Acta biomaterialia. 185.2024, 1 September, p. 254-265 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Mapping the composite nature of clay matrix in mudstones: integrated micromechanics profiling by high-throughput nanoindentation and data analysis

    Shi, X., Misch, D., Žák, S., Cordill, M. & Kiener, D., 14 Aug 2024, In: Geomechanics and geophysics for geo-energy and geo-resources. 10.2024, 25 p., 139.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Automatic and time-resolved determination of fracture characteristics from in situ experiments

    Schmuck, K. S., Antenreiter, M., Alfreider, M. & Kiener, D., Jul 2024, In: Materials & design. 243.2024, July, 12 p., 113038.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Mechanical processing and thermal stability of the equiatomic high entropy alloy TiVZrNbHf under vacuum and hydrogen pressure

    Schweiger, L., Römer, F., Gizer, G., Burtscher, M., Kiener, D., Pistidda, C., Schökel, A., Spieckermann, F. & Eckert, J., 10 Jun 2024, In: Applied physics letters. 124.2024, 24, 241903.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Exploring Refinement Characteristics in FeTi–Cux Composites: A Study of Localization and Abrasion Constraints

    Schweiger, L., Spieckermann, F., Buchebner, N., Keckes, J. F., Kiener, D. & Eckert, J., 8 Jun 2024, In: Advanced Engineering Materials. 26.2024, 19, 12 p., 2400593.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Microscopic fracture toughness of notched porous sintered Cu micro-cantilevers for power electronics packaging

    Hu, D., Du, L., Alfreider, M., Fan, J., Kiener, D. & Zhang, G., 7 Apr 2024, In: Materials Science and Engineering: A. 897.2024, April, 10 p., 146316.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Neural Network Supported Microscale In Situ Deformation Tracking: A Comparative Study of Testing Geometries

    Keckes, J. F., Jelinek, A., Kiener, D. & Alfreider, M., 23 Feb 2024, In: JOM. 76.2024, May, p. 2336-2351 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Micro-Mechanical Fracture Investigations on Grain Size Tailored Tungsten-Copper Nanocomposites

    Schmuck, K. S., Burtscher, M., Alfreider, M., Wurmshuber, M. & Kiener, D., 9 Jan 2024, In: JOM. 76.2024, 5, p. 2302-2314 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Hydrogen storage in nanoporous FeTi foams

    Schweiger, L., Spieckermann, F., Kostoglou, N., Stock, S., Wurster, S., Cengeri, P., Zehetbauer, M. J., Kiener, D. & Eckert, J., 2024.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Investigating mechanical properties of silicon carbide coated carbon nanotube composite at elevated temperatures

    Mo, J., Schaffar, G. J. K., Du, L., Maier-Kiener, V., Kiener, D., Vollebregt, S. & Zhang, G., 2024, 2024 IEEE 37th International Conference on Micro Electro Mechanical Systems (MEMS). Vol. 37.2024. p. 626-629 4 p. (IEEE access).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. 2023
  25. Published

    Nanomechanical characterization

    Kiener, D. & Misra, A., 18 Dec 2023, In: MRS Bulletin. 49.2024, March, p. 214-223 10 p.

    Research output: Contribution to journal › Review article › peer-review

  26. Published

    Deformation and failure behavior of nanocrystalline WCu

    Burtscher, M., Alfreider, M., Kainz, C. & Kiener, D., 6 Nov 2023, In: Materials Science and Engineering A. 887.2023, 6 November, 9 p., 145760.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    From unlikely pairings to functional nanocomposites: FeTi–Cu as a model system

    Schweiger, L., Kiener, D., Burtscher, M., Schafler, E., Mori, G. K., Spieckermann, F. & Eckert, J., 17 Oct 2023, In: Materials today advances. 20.2023, December, 13 p., 100433.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Nanoscale printed tunable specimen geometry enables high-throughput miniaturized fracture testing

    Jelinek, A., Žák, S., Cordill, M. J., Kiener, D. & Alfreider, M., Oct 2023, In: Materials and Design. 234.2023, October, 17 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

    Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K. & Maier-Kiener, V., 30 Sept 2023, (E-pub ahead of print) In: Current opinion in solid state & materials science. 27.2023, 6, 25 p., 101108.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation

    Leide, A. J., Haynes, T. A., Tzelepi, N., Payne, J., Jordan, M., Knol, S., Vreeling, J. A., Davies, M., Goddard, D. T., Pfeifenberger, M. J., Alfreider, M., Kiener, D. & Liu, D., Sept 2023, In: Nuclear Materials and Energy. 36.2023, September, 101470.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, In: Journal of magnesium and alloys. 11.2023, 6, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 161.2023, October, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Lower hardness than strength: The auxetic composite microstructure of limpet tooth

    Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S. & Kiener, D., 29 Apr 2023, (E-pub ahead of print) In: Acta biomaterialia. 166.2023, August, p. 447-453 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 3 Apr 2023, In: Advanced engineering materials. 25.2023, 7, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

    Eckert, J. (Editor) & Kiener, D. (Editor), Mar 2023, Multidisciplinary Digital Publishing Institute (MDPI).

    Research output: Book/Report › Book › Research

  40. Published

    Special Issue “Novel Structural and Functional Material Properties Enabled by Nanocomposite Design”

    Eckert, J. & Kiener, D., 1 Feb 2023, In: Nanomaterials. 13.2023, 3, 3 p., 586.

    Research output: Contribution to journal › Editorial › peer-review

  41. Published

    Enhancing mechanical properties of ultrafine-grained tungsten for fusion applications

    Wurmshuber, M., Doppermann, S., Wurster, S., Jakob, S., Balooch, M., Alfreider, M., Schmuck, K. S., Bodlos, R., Romaner, L., Hosemann, P., Clemens, H., Maier-Kiener, V. & Kiener, D., Feb 2023, In: International journal of refractory metals & hard materials. 111.2023, February, 7 p., 106125.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Novel Approach for Assessing Cyclic Thermomechanical Behavior of Multilayered Structures

    Seligmann, B., Alfreider, M., Wurmshuber, M. & Kiener, D., Feb 2023, In: Advanced engineering materials. 25.2023, 3, 10 p., 2201209.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Data-mining of in-situ TEM experiments: Towards understanding nanoscale fracture

    Steinberger, D., Issa, I., Strobl, R., Imrich, P. J., Kiener, D. & Sandfeld, S., 5 Jan 2023, In: Computational materials science. 216.2023, 5 January, 9 p., 111830.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    How tight are top seals? Insights from a comprehensive characterization workflow

    Shi, X., Misch, D., Cordill, M., Zak, S., Siedl, W., Sachsenhofer, R. & Kiener, D., 2023, 84th EAGE Annual Conference and Exhibition. p. 232-236 5 p. (84th EAGE Annual Conference and Exhibition; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. 2022
  46. Published

    Advances in multi-scale mechanical characterization

    Mangalampalli, K., Ghosh, P., Volpi, F., Kiener, D. & Useinov, A., 8 Dec 2022, In: Journal of applied physics. 132:2022, 22, 4 p., 220401.

    Research output: Contribution to journal › Editorial › peer-review

  47. Published

    Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness

    Oh, S. H., Kim, J.-K., Liu, Y., Wurmshuber, M., Peng, X.-L., Seo, J., Jeong, J., Wang, Z., Wilmers, J., Soyarslan, C., Kim, J., Kittiwirayanon, B., Jeong, J., Kim, H.-J., Huh, Y. H., Kiener, D., Bargmann, S. & Gao, H., 2 Dec 2022, In: Science Advances. 8.2022, 48, 10 p., eadd4644.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Publisher Correction: In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy (Journal of Materials Research, (2021), 36, 12, (2465-2478), 10.1557/s43578-020-00088-z)

    Burtscher, M., Alfreider, M., Schmuck, K. S., Clemens, H., Mayer, S. & Kiener, D., 14 Nov 2022, In: Journal of Materials Research. 37.2021, p. 3855 1 p.

    Research output: Contribution to journal › Comment/debate › peer-review

  49. Published

    Mechanical performance of doped W–Cu nanocomposites

    Wurmshuber, M., Burtscher, M., Doppermann, S., Bodlos, R., Scheiber, D., Romaner, L. & Kiener, D., 1 Nov 2022, In: Materials Science and Engineering A. 857.2022, 1 November, 12 p., 144102.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Hydrogen Storage in Porous Metalhydrid - Polymer Hybride Materials

    Schweiger, L., Spieckermann, F., Kiener, D., Mori, G. K. & Eckert, J., 27 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Interface-related deformation phenomena in metallic glass/high entropy nanolaminates

    Xu, Q., Şopu, D., Yuan, X., Kiener, D. & Eckert, J., 15 Sept 2022, In: Acta Materialia. 237.2022, 15 September, 9 p., 118191.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Crack length estimations for small-scale fracture experiments via image processing techniques

    Schmuck, K., Alfreider, M. & Kiener, D., 14 Sept 2022, In: Journal of Materials Research. 37.2022, 17, p. 2848-2861 14 p., 17.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    Interface mediated deformation and fracture of an elastic–plastic bimaterial system resolved by in situ transmission scanning electron microscopy

    Alfreider, M., Balbus, G., Wang, F., Zechner, J., Gianola, D. S. & Kiener, D., 14 Sept 2022, (E-pub ahead of print) In: Materials and Design. 223.2022, November, 17 p., 111136.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    100 years after Griffith: From brittle bulk fracture to failure in 2D materials

    Kiener, D. & Han, S. M., Aug 2022, In: MRS Bulletin. 47.2022, August, p. 792-799 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (336)