Clemens Holzer

1 - 100 out of 376Page size: 100

Research output

  1. 2025
  2. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Interaction of Binder and Powder in Processing of Titanium by MEX-AM

    Kukla, C., Gordo, E., Schuschnigg, S., Villemur, J., Luna, P. & Holzer, C., 2025, The 7th Powder Metallurgy and Additive Manufacturing of Titanium (PMTi 2024): Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Powder Metallurgy and Additive Manufacturing of Titanium (PMTi2024). Gordo Odériz, E. & Ruiz-Navas, E. M. (eds.). Trans Tech Publications, p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2024
  7. Published

    CircularBioMat

    Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Manufacturing of Soft Dielectric Actuator Assemblies by Material Extrusion (MEX)

    Raguz, I., Berer, M., Beier, P., Schlögl, S., Brancart, J., Vanderborght, B. & Holzer, C., 21 Nov 2024, p. 143-151. 9 p.

    Research output: Contribution to conference › Paper

  9. Published

    Analyse und Optimierung von österreichischem Polystyrol-Haushaltsabfall für die Wiederverwendung in Joghurtbecher-Lebensmittelverpackungen

    Krempl, N., Frühwirth, M., Zidar, D., Shahroodi, Z., Holzer, C., Pinter, E., Archodoulaki, M. V., Bichler, L., Jahn, E., Gabriel, V. H. & Aschermayer, F., 13 Nov 2024, VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz. p. 305-312 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Recycling of Wintersport Hardgoods - The Challenges of Circularity

    Zidar, D., Krempl, N., Pardametz, V., Bandl, C., Holzer, C., Griesser, T. (Editor) & Ladstätter, E. (Editor), Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. p. 39-47 9 p. (Publication Series Polymer Engineering & Science Leoben; vol. 13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Enhancing Recycled Polymers: The Impact of Reused Glass Fiber Composites on Rheological Properties and Processing Performance

    Shahroodi, Z., Krempl, N., Duretek, I. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  12. Published

    Insights Into LAOS Analysis of Liquid Silicone Rubber for Viscosity Determination

    Azevedo, M., Kerschbaumer, R. C. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  13. Published

    Rheological Characterisation of Powder Injection Moulding Feedstocks

    Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  14. Published

    Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen

    Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research

  15. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Additive Manufacturing of Bone Implants

    Holzer, C., 1 Jul 2024.

    Research output: Contribution to conference › Abstract

  18. Published

    Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

    Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    Unlocking the Potential of Recycled Polypropylene in Food Packaging

    Krempl, N., Holzer, C., Pinter, E., Frühwirth, M., Shahroodi, Z., Jahn, E., Aschermayer, F. & Gabriel, V. H., 19 May 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  24. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  25. Published

    Polymer Processing Bringing Together Polymers, Metals and Ceramics

    Holzer, C., 18 Apr 2024.

    Research output: Contribution to conference › Abstract

  26. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

    Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Polylactic Acid (PLA) as Backbone for the Fused Filament Fabrication (FFF) of Aluminium

    Kukla, C., Momeni, V., Schuschnigg, S. & Holzer, C., 2024, Proceedings - Euro PM 2024 Congress and Exhibition. (Proceedings - Euro PM 2024 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. 2023
  30. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Material characterisation of industrial textile waste under consideration of various processing conditions

    Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Effect of LOHC on HDPE and POK under different temperature conditions

    Surisetty, J. S. S., Lucyshyn, T. (Editor) & Holzer, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Influence of processing conditions of industrial textile waste on rheological and thermal material properties

    Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben, Vol. Volume 12. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming

    Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept 2023, p. 1-1. 1 p.

    Research output: Contribution to conference › Poster › Research

  35. Published

    The Effect of Post-industrial Recycled Glass Fiber Flakes on the Rheological Properties of Recycled Polypropylene

    Shahroodi, Z., Krempl, N. (Editor) & Holzer, C. (Co-editor), 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

    Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  41. 2022
  42. Published

    Sustainable Tunnelling – An infrastructure operator’s, planner’s, contractor’s and scientist’s perspective.

    Heissenberger, R., Grunicke, U., Raschendofer, J. & Holzer, C., 8 Dec 2022, In: Geomechanics and tunnelling. 15.2022, 6, p. 811-820 9 p.

    Research output: Contribution to journal › Article › Transfer › peer-review

  43. Published

    The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication

    Katalagarianakis, A., Van de Voorde, B., Pien, N., Polyzos, E., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Van Vlierberghe, S. & Pyl, L., Dec 2022, In: Additive Manufacturing. 60.2022, Part A, December, 14 p., 103246.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Influence of Binder Composition and Material Extrusion (MEX) Parameters on the 3D Printing of Highly Filled Copper Feedstocks

    Sadaf, M., Cano Cano, S., Gonzalez-Gutierrez, J., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály , L., Kitzmantel, M. & Nanni, F., 16 Nov 2022, In: Polymers / Molecular Diversity Preservation International. 14.2022, 22, 23 p., 4962.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Peroxide-Based Crosslinking of Solid Silicone Rubber, Part I: Insights into the Influence of Dicumylperoxide Concentration on the Curing Kinetics and Thermodynamics Determined by a Rheological Approach

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C., Schlögl, S. & Holzer, C., 18 Oct 2022, In: Polymers. 14.2022, 20, 22 p., 4404.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

    Ghasemi-Mobarakeh, L., Cano, S., Momeni, V., Liu, D., Duretek, I., Riess, G., Kukla, C. & Holzer, C., 2 Sept 2022, In: Polymers. 14.2022, 17, 15 p., 3653.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Developing a Feedstock for the Fused Filament Fabrication (FFF) of Aluminium

    Momeni, V., Shahroodi, Z., Kukla, C. & Holzer, C., Sept 2022, Conference: 2nd International Conference on Polymer Process Innovation.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Novel Additive Manufacturing Materials for Waste Heat Deduction

    Schuschnigg, S., Hufnagl, M., Holzer, C., Eder, F., Kroke, E., Schallmeiner, S., Regula, C., Hamedi, Y., Grosche, C., Morganti, E. & Seidler, K., 29 Jul 2022, In: Advanced engineering materials. 2022, 10 p., 22006714.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 11 Apr 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    The influence of recyclates on the mechanical and long-term properties of virgin materials

    Hinczica, J., Geier, J., Kirschnick, U., Holzer, C., Frank, A. & Pinter, G. G., 4 Apr 2022.

    Research output: Contribution to conference › Paper › peer-review

  52. Published

    Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

    Van de Voorde, B., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J. M., Duretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Van Hemelrijck, D., Pyl, L. & Van Vlierberghe, S., Feb 2022, In: Additive Manufacturing. 50.2022, February, 14 p., 102518.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Investigating thermomechanical recycling of poly(ethylene terephthalate) containing phosphorus flame retardants

    Bascucci, C., Duretek, I., Lehner, S., Holzer, C., Gaan, S., Hufenus, R. & Gooneie, A., Jan 2022, In: Polymer Degradation and Stability. 195.2022, January, 11 p., 109783.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Simulations of the filament printing of metal feedstocks with different nozzle designs

    Schuschnigg, S., Hubmann, M., Cano Cano, S., Hentschel, L., Holzer, C. & Gonzalez-Gutierrez, J., 2022, Proceedings of the WorldPM 2022, Lyon.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. 2021
  56. E-pub ahead of print

    Material extrusion additively manufactured alumina monolithic structures to improve the efficiency of plasma-catalytic oxidation of toluene

    Li, T., Gonzalez-Gutierrez, J., Raguz, I., Holzer, C., Li, M., Cheng, P., Kitzmantel, M., Shi, L. & Huang, L., 10 Nov 2021, (E-pub ahead of print) In: Additive Manufacturing. 37.2021, January, 9 p., 101700.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

    Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Thermal Conductive Polymer Compounds for Material Extrusion Additive Manufactured of Heat Sinks

    Holzer, C., Schuschnigg, S. & Cano Cano, S., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 250 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Thermal conductive, electrically insulating polymer compounds using material extrusion additive manufacturing for electronic parts

    Holzer, C., Cano Cano, S., Schuschnigg, S. & Hentschel, L., 2 Sept 2021, p. 32-32. 1 p.

    Research output: Contribution to conference › Abstract

  60. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. 2020
  64. Published

    Processing Conditions of a Medical Grade Poly(Methyl Methacrylate) with the Arburg Plastic Freeforming Additive Manufacturing Process

    Hentschel, L., Kynast, F., Petersmann, S., Holzer, C. & Gonzalez-Gutierrez, J., 2 Nov 2020, In: Polymers. 12, 11, p. 1-15 15 p., 2677.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  66. Published

    Eingliederung von Additiven Fertigungstechnologien in einen klinischen Prozess zur Herstellung von medizinischen Implantaten

    Hentschel, L., Gonzalez-Gutierrez, J. & Holzer, C., 1 Oct 2020, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2020, p. 56-61

    Research output: Contribution to journal › Article › Research

  67. Published

    Biofunctional Glycol-Modified Polyethylene Terephthalate and Thermoplastic Polyurethane Implants by Extrusion-Based Additive Manufacturing for Medical 3D Maxillofacial Defect Reconstruction

    Katschnig, M., Wallner, J., Janics, T., Burgstaller, C., Zemann, W. & Holzer, C., 5 Aug 2020, In: Polymers. 12.2020, 8, 1751.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  69. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Qualifizierung von Materialien für medizinische Anwendungen mittels des Arburg Freeformers

    Holzer, C., Hentschel, L., Kynast, F., Schuschnigg, S. & Gonzalez-Gutierrez, J., 15 May 2020. 2 p.

    Research output: Contribution to conference › Abstract

  71. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

    Godec, D., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 8 Feb 2020, In: Materials. 13.2020, 3, 23 p., 774.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Development of new treatment methods for multi material textile waste

    Jenull-Halver, U., Holzer, C., Piribauer, B. & Quartinello, F., 10 Jan 2020, AIP Conference Proceedings 2205. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. 2019
  76. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  77. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  78. E-pub ahead of print

    Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

    Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 15 Oct 2019, (E-pub ahead of print) In: Journal of applied polymer science. 137.2020, 12, 16 p., 48454.

    Research output: Contribution to journal › Review article › peer-review

  79. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Physical Foaming and Crosslinking of Polyethylene with Modified Talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 9 Sept 2019, In: Polymers. 11.2019, 9, 15 p., 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  82. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  84. Published

    Post processing of polymeric cranial implants produced by material extrusion based additive manufacturing

    Holzer, C., Gonzalez-Gutierrez, J., Petersmann, S., Pichelmayer, M. & von Campe, G., 9 Jul 2019. 1 p.

    Research output: Contribution to conference › Abstract

  85. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  86. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy

    Katschnig, M., Maroh, B., Andraschek, N., Schlögl, S., Zefferer, U., Bock, E., Leitinger, G., Trattnig, C., Kaufmann, M., Balika, W., Holzer, C., Schäfer, U., Patz, S. & Schlögl, S., 2 May 2019, In: International journal of biomaterials . 2019, p. 2019 12 p., Article ID 2393481.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  90. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  91. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  94. 2018
  95. Published

    Additive Fertigung von metallischen und keramischen Produkten mittels Filamentextrusion

    Holzer, C., 23 Oct 2018, p. 72-75. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  96. Published

    Design and fabrication of monolithic catalyst for plasma-catalytic oxidation of toluene

    Huang, L., Zheng, M., Jiang, W., Shi, L., Gonzalez-Gutierrez, J. & Holzer, C., 20 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract

  97. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  98. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  99. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  103. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Cranial polyetheretherketone implants by extrusion–based additive manufacturing: state of the art and prospects

    Katschnig, M. & Holzer, C., 1 May 2018, In: Material Science & Engineering International Journal. 2.2018, 3, p. 66-68 3 p.

    Research output: Contribution to journal › Review article › peer-review

  106. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)