Christian Kukla

(Former)

51 - 100 out of 119Page size: 50

Research output

  1. 2018
  2. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  3. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Highly filled polymers in production technologies

    Kukla, C., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  7. 2017
  8. Published

    Special Binder Systems for Metal Powders in Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J., Arbeiter, F., Burkhardt, C., Hampel, S., Kukla, C. & Holzer, C., 14 Dec 2017, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Special Binder Systems for the Use with Metal Powders for Highly Filled Filaments for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Kukla, C., Arbeiter, F. & Holzer, C., 14 Dec 2017, 33rd Annual Meeting of the Polymer Processing Society. Cancun, Mexico, Vol. 33. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Isotropic NdFeB hard magnets: MIM production using recycled powders with and without Nd additions

    Burkhardt, C., Weber, O., Podmiljsak, B., Gonzalez-Gutierrez, J., Kukla, C., Degri, M., Harris, I. R. & Walton, A., 1 Dec 2017, In: Powder injection moulding international. 11, 4, p. 75-81 7 p.

    Research output: Contribution to journal › Article › Research

  11. Published

    3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts

    Gonzalez-Gutierrez, J., Godec, D., Guran, R., Spörk, M., Kukla, C. & Holzer, C., 15 Nov 2017, In: Metalurgija : casopis Izdaje Tehnoloski Fakultet Sveucilista u Zagrebu, Odjeli u Sisku, Institut za Metalurgiju i Zeljezara Sisak = Metallurgy. 57.2018, 1-2, p. 117-120 4 p., 669.15:621.775:669.015:66.049.4:621.385.833=111.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Feedstocks for metal injection moulding: Effect of particle charcateristics and binder composition on the rheological properties and the morphology of metal injection moulding feedstocks

    Kukla, C. & Gonzalez-Gutierrez, J., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 127 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  13. Published

    Resource Efficient Production of Magnets: Utilization of recycled rare earth magnetic material for the production of magnets with complex structure and geometry via additive manufacturing and metal injection moulding

    Gonzalez-Gutierrez, J. & Kukla, C., 15 Nov 2017, WerWasWo.Forschung@MUL 2017. Schuschnigg, S. (ed.). 6 ed. Leoben, Austria, p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer

  14. Published

    The production of magnets by FFF - Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Burkhardt, C., Weber, O. & Holzer, C., 1 Oct 2017, Euro PM2017 Congress & Exhibition. Milan, Italy: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Development of highly-filled polymer compounds for fused filament fabrication of ceramics and solvent debinding

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Kukla, C. & Holzer, C., 27 Jun 2017.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    SHAPING, DEBINDING AND SINTERING OF STEEL COMPONENTS VIA FUSED FILAMENT FABRICATION

    Gonzalez-Gutierrez, J., Godec, D., Kukla, C., Schlauf, T., Burkhardt, C. & Holzer, C., 8 Jun 2017, 16th International Scientific Conference on Production Engineering. Udiljak, T. (ed.). Zadar, Croatia, p. 99 104 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Fused Filament Fabrication (FFF) of PIM Feedstocks

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Hampel, S., Burkhardt, C., Moritz, T. & Holzer, C., 7 Jun 2017, ACTAS DEL VI CONGRESO NACIONAL DE PULVIMETALURGIA Y I CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Herranz, G., Ferrari, B. & Cabrera, J. M. (eds.). Ciudad Real, Spain, Vol. 6. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Fused Filament Fabrication for the production of metal and/or ceramic parts and feedstocks therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017, 19th Plansee Seminar. Reutte, Austria: Plansee AG, Vol. 19. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Fused Filament Fabrication for the Production of Metal and/or Ceramic Parts and Feedstocks Therefore

    Kukla, C., Gonzalez-Gutierrez, J., Cano Cano, S., Burkhardt, C., Hampel, S., Moritz, T. & Holzer, C., 29 May 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  20. Published

    FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

    Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA, 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    MOLECULAR DYNAMICS SIMULATIONS AS A TOOL FOR MATERIAL SELECTION IN METAL INJECTION MOULDING FEEDSTOCKS

    Gooneie, A., Gonzalez-Gutierrez, J., Kukla, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Ljubljana, Slovenia, Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    The SDS process: A viable way for the production of metal parts

    Kukla, C., Gonzalez-Gutierrez, J., Hampel, S., Burkhardt, C. & Holzer, C., 24 Apr 2017, CONFERENCE PROCEEDINGS ICIT&APT 2017 10th International Conference on Industrial Tools and Advanced Processing Technologies. Hancic, A. & Grum, J. (eds.). Vol. 10. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Metal Injection Moulding for the Production of Recycled Rare Earth Magnets

    Gonzalez-Gutierrez, J., Walton, A., Schlauf, T., Burkhardt, C., Kukla, C., Krispin, M. & Holzer, C., 20 Apr 2017. 1 p.

    Research output: Contribution to conference › Poster › Research

  24. Published

    Rheology of PIM feedstocks

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 9 Feb 2017, In: Metal Powder Report. 72, 1, p. 39-44 6 p.

    Research output: Contribution to journal › Article › Research

  25. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S. & Holzer, C., 2017.

    Research output: Contribution to conference › Paper › peer-review

  26. 2016
  27. Published

    Controlled shear stress method to measure yield stress of highly filled polymer melts

    Kukla, C., Duretek, I. & Holzer, C., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. Vol. 1779. 070006

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Metal Injection Moulding of NdFeB Based on Recycled Powders

    Imgrund, P., Weber, O., Schlauf, T., Pischang, K., Pickering, L., Walton, A., Gonzalez-Gutierrez, J., Kukla, C. & Burkhardt, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Properties for PIM Feedstocks Used in Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Holzer, C., Kukla, C., Duretek, I., Schuschnigg, S. & Gonzalez-Gutierrez, J., 28 Jul 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, p. 299. 1 p.

    Research output: Contribution to conference › Abstract

  32. Published

    Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France, Vol. 32. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Models to Predict the Viscosity of Metal Injection Molding Feedstock Materials as Function of Their Formulation

    Gonzalez-Gutierrez, J., Duretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I. & Holzer, C., 28 May 2016, In: Metals : open access journal . 6.2016, 6, p. 129-146 17 p., 129.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria, Vol. 25. p. 187-188 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Fused Filament Fabrication for Metallic Parts

    Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., Apr 2016, p. 1.

    Research output: Contribution to conference › Poster › Research

  36. 2015
  37. Published

    DEVICE FOR MEASURING THE SHEAR STRESS OF A VISCOUS FLUID

    Zurk, A. P. (Inventor) & Kukla, C. (Inventor), 10 Dec 2015, IPC No. G01N 11/ 04 A I, Patent No. WO2015185746, Priority date 5 Jun 2014, Priority No. GB20140010012

    Research output: Patent

  38. Published

    Device for measuring the shear stress of a viscous fluid

    August, P. Z. (Inventor) & Christian, K. (Inventor), 9 Dec 2015, IPC No. G01N 11/ 04 A I, Patent No. GB2526861, Priority date 5 Jun 2014, Priority No. GB20140010012

    Research output: Patent

  39. Published

    Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

    Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    流動性基材で作製される部品の製造を制御するための音響ノイズ感知

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Müller, F. (Inventor) & Rath, G. (Inventor), 26 Mar 2015, IPC No. B29C 45/ 76 A I, Patent No. JP2015509054, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  42. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Muller, F. (Inventor), 29 Jan 2015, IPC No. B29C 45/ 76 A I, Patent No. US2015028507, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  43. 2014
  44. Published

    MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  45. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  46. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  47. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

    Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2013
  53. Published

    Acoustic sensing in plastics moulding process

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 24 Jul 2013, IPC No. B29C 45/ 76 A I, Patent No. GB2498586, Priority date 23 Jan 2012, Priority No. GB20120001067

    Research output: Patent

  54. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Adhesion tendency of polymers to hard coatings

    Rebelo De Figueiredo, M., Bergmann, C., Ganser, C., Teichert, C., Kukla, C. & Mitterer, C., 2013, In: International polymer processing. 28, 4, p. 415-420 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (119)