Abdellah Kharicha

1 - 305 out of 305Page size: 500

Research output

  1. 2024
  2. Published

    Interplay of flow stratification, segregation channels, and crystal dynamics in a solidifying aqueous ammonium chloride solution

    Ludwig, A., Siyahatshayesteh, G., Stefan-Kharicha, M., Wu, M. & Kharicha, A., 27 Dec 2024, In: International journal of heat and mass transfer. 240.2025, 1 May, 8 p., 126638.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modeling Freeze-Lining Formation: A Case Study in the Slag Fuming Process

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Lind, C. & Kharicha, A., 27 Oct 2024, In: Steel research international. 2025, ??? Stand: 17. Februar 2025, 15 p., 2400618.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modelling freckles and spurious grain formation in directionally solidified superalloy castings

    Zhang, H., Zhao, Y., Xiong, W., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 19 Oct 2024, In: Communications materials. 2024, 5, 12 p., 232.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A Coupled Magnetohydrodynamics (MHD) and Thermal Stress-Strain Model to Explore the Impact of Gas Cooling on Ingot Solidification Shrinkage in Vacuum Arc Remelting (VAR) Process

    Bohacek, J., Karimi Sibaki, E., Vakhrushev, A., Mraz, K., Hvozda, J., Wu, M. & Kharicha, A., 4 Sept 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, December, p. 4408-4417 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Advancements in Electric Arc Furnace Technology and Numerical Modeling of Hydrogen Electric Arcs

    Al Nasser, M., Wu, M. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  7. Published

    A numerical study on the solidification shrinkage of the ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Bohacek, J., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  8. Published

    A numerical study on the solidification shrinkage of the ingot in vacuum arc remelting (VAR) process

    Mraz, K., Bohacek, J., Karimi Sibaki, E., Vakhrushev, A., Wu, M. & Kharicha, A., Sept 2024. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Consideration of the timing of dendrite pinch-off for a flow-driven fragmentation mechanism during the casting process

    Zhang, H., Wu, M. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Generation of Tornados and Cyclones from Electrovortex Under External Fields

    Al Nasser, M., Wu, M. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Insights into Electric Arc Furnace Behavior: A prectical Simulation Approach

    Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Magnetohydrodynamics phenomene in continuous casting process under applied electromagnetic braking (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  13. Published

    On Modelling Electromagnetic Braking in Thin Slab Continuous Casting: fundamentals, applications and outlooks

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Using CFD to study freeze-lining formation: a collaborative research project between academia and industry

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Lind, C., Qiu, Z., Guo, M., Malfliet, A. & Kharicha, A., Sept 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Comment on “Numerical study with OpenFOAM on heat conduction problems in heterogeneous media” by K. Zhang, C.-A. Wang, J.-Y. Tan, International Journal of Heat and Mass Transfer, Vol. 124 (2018) 1156–1162

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Karimi Sibaki, E., Vakhrushev, A. & Kharicha, A., 1 Aug 2024, In: International journal of heat and mass transfer. 227.2024, 1 August, 3 p., 125603.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Multiphase Modeling of Dynamically Deforming Electrode-Electrolyte Interface in Electrochemical Systems

    Karimi Sibaki, E. & Kharicha, A., Aug 2024.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Explanation for the linear solid/liquid interface recoil observed during directional solidification of a TRIS-NPG alloy under microgravity conditions

    Ludwig, A., Mogeritsch, J. P., Barati, H., Wu, M. & Kharicha, A., 23 Jul 2024, In: Journal of crystal growth. 644.2024, 15 October, 8 p., 127824.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A numerical study on effects of current density distribution, turbulence, and magnetohydrodynamics (MHD) on electrolytic gas flow with application to alkaline water electrolysis (AWE)

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Bohacek, J. & Kharicha, A., 20 Jul 2024, In: Chemical Engineering Research and Design. 208.2024, August, p. 731-739 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Theoretical and experimental approaches to determine the mass transfer coefficient in the steel/slag/refractory system

    Schickbichler, M., Karimi Sibaki, E., Kharicha, A. & Michelic, S. K., 19 Jul 2024, 12th International Conference on Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings. p. 239-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. E-pub ahead of print

    Mapping electro-vortex flow patterns from tornado to inverted tornado in a hemispherical container

    Abdi, M., Karimi Sibaki, E., Sommitsch, C., Barati, H., Al Nasser, M., Wu, M., Teplyakov, I. & Kharicha, A., 12 Jun 2024, (E-pub ahead of print) In: International Journal of Thermofluids. 23.2024, August, 11 p., 100721.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A Study on Ammonium Chloride Dendrite Tip Kinetics: The Importance of the Solid–Liquid Density Change and Interfacial Kinetics

    Alrasheedi, N., Stefan-Kharicha, M., Sari, I., Ahmadein, M. & Kharicha, A., 6 Jun 2024, In: Materials. 17.2024, 11, 11 p., 2768.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Advancements in State-of-the-Art Simulation of the Slag in ESR Process

    Karimi Sibaki, E. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  23. Published

    CFD modelling of slag fuming, with focus on freeze-lining formation

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., Jun 2024, p. 839-846. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Determination of transient heat transfer by cooling channel in high-pressure die casting using inverse method

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Raudensky, M., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting mold under the applied electromagnetic brake

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting (TSC) mold under the applied electromagnetic brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    On the conditions for the occurrence of crystal avalanches during alloy solidification

    Siyahatshayesteh, G., Ludwig, A., Stefan-Kharicha, M., Wu, M. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Tornado flow inside Electric Arc Furnace driven by External Magnetic Field

    Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Towards Sustainability: Exploring Hydrogen Arc utilization in Electric Arc Furnaces

    Kharicha, A., Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N. & Hackl, G., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Plasma Generation and Expansion in the Vacuum Arc Remelting (VAR) process

    Karimi Sibaki, E. & Kharicha, A., Apr 2024.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Exploring Extreme Voltage Events in Hydrogen Arcs within Electric Arc Furnaces

    Al Nasser, M., Alrasheedi, N., Karimi Sibaki, E., Vakhrushev, A., Ahmadein, M., Ataya, S. & Kharicha, A., 28 Mar 2024, In: Sustainability. 16.2024, 7, 17 p., 2831.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The Impact of Marangoni and Buoyancy Convections on Flow and Segregation Patterns during the Solidification of Fe-0.82wt%C Steel

    Sari, I., Wu, M., Ahmadein, M., Ataya, S., Alrasheedi, N. & Kharicha, A., 5 Mar 2024, In: Materials. 17.2024, 5, 16 p., 1205.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Assessment of URANS-Type Turbulent Flow Modelling of a Single Port Submerged Entry Nozzle (SEN) for Thin Slab Continuous Casting (TSC) Process

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 26 Feb 2024, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, April, p. 891-904 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy

    Sari, I., Alrasheedi, N., Ahmadein, M., Djuansjah, J., Hachani, L., Zaidat, K., Wu, M. & Kharicha, A., 16 Feb 2024, In: Materials. 17.2024, 4, 12 p., 912.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate

    Sari, I., Ahmadein, M., Ataya, S., Hachani, L., Zaidat, K., Alrasheedi, N., Wu, M. & Kharicha, A., 13 Feb 2024, In: Materials. 17.2024, 4, 15 p., 865.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Numerical modeling of clog fragmentation during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Ilie, S., Kharicha, A. & Ludwig, A., 1 Feb 2024, In: Powder Technology. 434.2024, 1 February, 14 p., 119307.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Development of a Dross Build-Up Growth Process Model for Hot-Dip Galvanizing Considering Surface Reaction Kinetics

    Reiss, G., Eßl, W., Trasca, R. A., Mugrauer, C., Stefan-Kharicha, M., Kharicha, A., Gerold, E. & Goodwin, F., Feb 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, February, p. 53-63 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    3D Modelling of Electro Vortex Flow Inside Liquid Metal and Effect of External Magnetic Fields

    Al Nasser, M., Karimi Sibaki, E., Wu, M., Redl, C., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    A Numerical Study on the Influence of External Magnetic field on Hydrogen Electric Arc Flow

    Al Nasser, M., Karimi Sibaki, E., Wu, M., Redl, C., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., 2024. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  40. Published

    Development and Application of a Computational Fluid Dynamics Model to Study Slag Freeze Lining

    Gomes Rodrigues, C., Wu, M., Kharicha, A., Ishmurzin, A., Hackl, G., Lind, C., Chintinne, M., Qiu, Z., Malfliet, A. & Guo, M., 2024, In: RHI bulletin : the journal of refractory innovations. 2024, 1, p. 77-81 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of Marangoni flow during the solidification of a Fe- 0.82wt.%C steel alloy

    Sari, I., Wu, M., Ludwig, A. & Kharicha, A., 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  42. 2023
  43. Published

    Experimental and Numerical Investigations into Heat Transfer Using a Jet Cooler in High-Pressure Die Casting

    Bohacek, J., Mraz, K., Krutis, V., Kana, V., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., 28 Nov 2023, In: Journal of Manufacturing and Materials Processing. 7.2023, 6, 14 p., 212.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A multiphase model for exploring electrochemical Marangoni flow

    Karimi Sibaki, E., Vakhrushev, A., Kadylnykova, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 1 Sept 2023, In: Electrochemistry Communications. 155.2023, October, 6 p., 107567.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of compressibility on industrial DC electric arcs

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Leuchtenmüller, M., Wu, M. & Kharicha, A., 22 Jul 2023, In: Results in Engineering. 19.2023, September, 12 p., 101312.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Transient Simulation of Diffusion-Limited Electrodeposition Using Volume of Fluid (VOF) Method

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 4 Jul 2023, In: Journal of the Electrochemical Society. 170.2023, 7, 7 p., 072501.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Solidification Principle in Large Vertical Steel Casting Under the EMS Effect

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., 19 May 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, August, p. 1078-1085 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 11 Mar 2023, In: International journal of heat and mass transfer. 280.2023, July, 15 p., 124050.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Kharicha, A., 21 Feb 2023, In: Metals : open access journal . 13.2023, 3, 21 p., 444.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 21 Feb 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, April, p. 880-894 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Novel strategy to model deformation-induced strand contraction/dilatation during mechanical reduction

    Guan, R., Rodrigues, C. M. G., Ji, C., Zhu, M., Li, S., Wu, M., Kharicha, A., Vakhrushev, A. & Ludwig, A., Feb 2023, In: Applied Mathematical Modelling. 114.2023, February, p. 770-784 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Digital twin for directional solidification of a single-crystal turbine blade

    Zhang, H., Liu, X., Ma, D., Song, M., Ludwig, A., Kharicha, A. & Wu, M., 1 Jan 2023, In: Acta Materialia. 244.2023, 1 January, 15 p., 118579.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Potential eutectic accumulation in single crystal turbine blade due to geometry effect: a numerical study

    Zhang, H. J., Liu, X. S., Ma, D. X., Ludwig, A., Kharicha, A. & Wu, M. H., 1 Jan 2023, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    ASSESMENT OF VOLUME OF FLUID METHODS TO MODEL ELECTROMAGNETIC BRAKE IN CONTINOUS CASTING MOLD USING OPENFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023. 1 p.

    Research output: Contribution to conference › Abstract

  55. Published

    Assessment of Volume of Fluid Methods to Model Electromagnetic Brake in Continuous Casting Mold Using OpenFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Continuum mixture solidification model for simulation of freeze lining in smelting furnace

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 2023. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Dynamics of 3D Hydrogen Electric Arc under external Magnetic Field

    Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Flow-enhanced remelting of settling/floating globular crystals during mixed columnar-equiaxed solidification

    Wu, M., Zhang, Z., Ludwig, A. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  59. Published

    Fluid flow and heat transfer in a liquid metal film under applied transversal magnetic field

    Al Nasser, M., Vakhrushev, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Impact of external magnetic fields on the melt pool geometry in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Ludwig, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Influence of external magnetic field on 3D electro vortex flow inside conducting liquids

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    Influence of the adjustable EMBr on the asymmetric flow in a thin slab caster with a misaligned SEN

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Influence of the rotational component of a submerged entry nozzle jet on the free surface oscillations under the applied DC magnetic field

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Modelling 3D Electro vortex Flow inside liquid metal and Effect of External Magnetic Fields on Flow Pattern

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Numerical study on the formation of spurious grains and freckles during the directional solidification of superalloys

    Zhang, Z., Wu, M., Liu, X., Song, M., Ludwig, A. & Kharicha, A., 2023. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  66. Published

    On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 p., 012023.

    Research output: Contribution to journal › Conference article › peer-review

  67. Published

    Potential etutectic accumulation in single crytal turbine blade due to geometry effect: a numerical study

    Zhang, H., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  68. Published

    Simulations of 3D Hydrogen Electric Arc and Effect of External Magnetic Field on Arc Flow Dynamics

    Al Nasser, M., Barati, H., Redl, H., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Transient simulation of melt flow, clogging, and clog fragmentation inside SEN during steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2023. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  70. 2022
  71. Published

    Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

    Karimi-Sibaki, E., Peyha, M., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J., Preiss, B. & Kharicha, A., Dec 2022, In: Scientific reports. 2022, 12, 14 p., 20405.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Determination of Cooling Rate and Temperature Gradient during Formation of Cathode Spot Craters in a Vacuum Arc

    Mogeritsch, J., Franz, R., Golizadeh, M., Mitterer, C. & Kharicha, A., 19 Oct 2022, In: Crystals. 12.2022, 10, 13 p., 1486.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Dendrite fragmentation mechanism under forced convection condition by rotating magnetic field during unidirectional solidification of AlSi7 alloy

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., 28 Sept 2022, (E-pub ahead of print) In: Acta Materialia. 241.2022, December, 14 p., 118391.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Experimental Evaluation of MHD Modeling of EMS During Continuous Casting

    Zhang, H., Wu, M., Zhang, Z., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., Aug 2022, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 53.2022, 4, p. 2166-2181 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Tornados and cyclones driven by Magneto-hydrodynamic forces

    Kharicha, A., Al-Nasser, M., Barati, H., Karimi-Sibaki, E., Vakhrushev, A., Abdi, M., Ludwig, A. & Wu, M., 1 Jul 2022, In: European Journal of Mechanics - B/Fluids. 94.2022, July-August, p. 90-105 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    The Role of Mold Electromagnetic Stirring in the Dissipation of Superheat during the Continuous Casting of Billets

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 29 Jun 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 10, 14 p., 2200065.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Validation of a capillary-driven fragmentation model during mixed columnar-equiaxed solidification with melt convection and grain transport

    Rodrigues, C. M. G., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., Jun 2022, In: Materialia. 23.2022, June, 12 p., 101462.

    Research output: Contribution to journal › Article › Research › peer-review

  78. E-pub ahead of print

    Numerical modeling and experimental validation of the effect of arc distribution on the as-solidified Ti64 ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Abdi, M., Wu, M., Ludwig, A., Bohacek, J. & Preiß, B., 11 May 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 19.2022, July-August, p. 183-193 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Modeling Asymmetric Flow in the Thin-Slab Casting Mold Under Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., May 2022, In: Steel research international. 93.2022, 5, 11 p., 2200088.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Rodrigues, C. M. G., 23 Mar 2022, In: Journal of iron and steel research international. 29.2022, 1, p. 88-102 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., Mar 2022, In: Journal of materials processing technology. 301.2022, March, 15 p., 117434.

    Research output: Contribution to journal › Article › Research › peer-review

  82. E-pub ahead of print

    Hydrodynamically driven facet kinetics in crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 31 Jan 2022, (E-pub ahead of print) In: Journal of crystal growth. 584.2022, 15 April, 8 p., 126557.

    Research output: Contribution to journal › Article › Research › peer-review

  83. 2021
  84. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Reverse flows and flattening of a submerged jet under the action of a transverse magnetic field

    Kharicha, A., Vakhrushev, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 9 Dec 2021, In: Physical review research. 6.2021, 12, 123701.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamicsusing tertiary curent distribution in electroslag remelting process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 6 Dec 2021, In: Journal of iron and steel research international. 28.2021, December, p. 1551-1561 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Toward a Simplified Arc Impingement Model in a Direct-Current Electric Arc Furnace

    Al-Nasser, M., Kharicha, A., Barati, H., Pichler, C., Hackl, G., Gruber, M., Ishmurzin, A., Redl, C., Wu, M. & Ludwig, A., 17 Sept 2021, In: Metals. 11.2021, 9, 17 p., 1482.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Schumacher, P., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., Sept 2021, In: Applied Mathematical Modelling. 97.2021, September, p. 821-838 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-EquiaxedSolidification

    Gomes Rodrigues, C., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 12 Aug 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, October, p. 4609–4622 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., 10 May 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, July, p. 3007-3022 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 57.2021, 4, p. 1697-1705 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Important Key Process Simulations in the Field of Steel Metallurgy

    Ludwig, A., Gomes Rodrigues, C., Zhang, Z., Zhang, H., Karimi Sibaki, E., Barati, H., Vakhrushev, A., Al Nasser, M., Wu, M. & Kharicha, A., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 1, p. 2-9 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influence of Dross Build-up Induced Roughness on Flow Structures and Heat-Transfer of Sink Rolls in Hot-dip Galvanizing Lines

    Reiss, G., Stefan-Kharicha, M., Kharicha, A., Trasca, R. A. (Co-editor), Mugrauer, C., Unger, H. (Co-editor) & Goodwin, F., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. Published

    NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS

    Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. 2020
  100. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 1 Dec 2020, In: Journal of materials processing technology. 286.2020, December, 9 p., 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Flow-solidification interaction: A numerical study on solidification of NH4Cl – 70 wt.%H2O solution in a water-cooled mould with a large sample thickness

    Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy

    Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Impact of hydrodynamics on growth and morphology of faceted crystals

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541.2020, 1 July, 11 p., 125667.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Modeling mixed columnar-equiaxed solidification of Sn-10wt%Pb alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M., Zhang, H., Karimi-Sibaki, E., Ludwig, A. & Kharicha, A., 12 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 861, 1, 012024.

    Research output: Contribution to journal › Conference article › peer-review

  107. Published

    Impact of crystal sedimentation and viscoplastic semi-solid dynamics on macrosegregation

    Gomes Rodrigues, C., Ludwig, A. (Co-editor), Wu, M. (Co-editor), Kharicha, A. (Co-editor) & Vakhrushev, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater.Sci.Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  108. Published

    Influence of crystal fragmentation on the formation of microstructure and macrosegregation during directional solidification under forced convection condition

    Zhang, H., Wu, M. (Co-editor), Zhang, Z. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP conf. Series: Mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  109. Published

    Modeling mixed columnar-equiaxed solificiation of Sn-10wt% alloy under forced convection driven by travelling magnetic stirring

    Zhang, Z., Wu, M. (Co-editor), Zhang, H. (Co-editor), Karimi Sibaki, E. (Co-editor), Ludwig, A. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci. Eng. . Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  110. Published

    Modelling of shear bands during solidification

    Ludwig, A., Gomes Rodrigues, C. (Co-editor), Wu, M. (Co-editor) & Kharicha, A. (Co-editor), Jun 2020, IOP Conf. Series: Mater. Sci.Eng. . online, Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  111. Published

    Modelling viscoplastic behavior of solidifying shell under applied electromagnetic breaking during continuous casting

    Vakhrushev, A., Kharicha, A. (Co-editor), Wu, M. (Co-editor), Ludwig, A. (Co-editor), Nitzl, G. (Co-editor), Tang, Y. (Co-editor), Hackl, G. (Co-editor), Watzinger, J. (Co-editor) & Gomes Rodrigues, C. (Co-editor), Jun 2020, IOP Conf. Series: mater. Sci. Eng.. Vol. 861.

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  112. Published

    A 2D Multiphase Model of Drop Behavior during Electroslag Remelting

    Chaulet, J., Kharicha, A., Charmond, S., Dussoubs, B., Hans, S., Wu, M., Ludwig, A. & Jardy, A., 8 Apr 2020, In: Metals. 10.2020, 4, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    Numerical study of the role of mush permeability in the solidifying mushy zone under forced convection

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 1 Mar 2020, In: Materials Today Communications. 22.2020, March, 9 p., 100842.

    Research output: Contribution to journal › Article › Research › peer-review

  114. Published

    A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 20 Feb 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 3, p. 871-879 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  115. E-pub ahead of print

    A volume of fluid (VOF) method to model shape change during electrodeposition

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 31 Jan 2020, (E-pub ahead of print) In: Electrochemistry Communications. 112.2020, 106675.

    Research output: Contribution to journal › Article › Research › peer-review

  116. 2019
  117. E-pub ahead of print

    A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 29 Oct 2019, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 1, p. 222-235 p 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    A Dynamic Mesh Method to Model Shape Change during Electrodeposition

    Karimi-Sibaki, E., Kharicha, A., Abdi, M., Wu, M., Ludwig, A. & Bohacek, J., 31 Jul 2019, In: Journal of the Electrochemical Society. 166.2019, 12, p. D521-D529 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Diffusion-Reaction-Limited Mass Transfer on the Surface of an Electrically Conductive Droplet

    Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., Jul 2019.

    Research output: Contribution to conference › Paper

  120. Published

    Interaction between flow and faceted crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Wu, M., Ludwig, A., Mogeritsch, J., Reiss, G. & Eßl, W., 19 Jun 2019.

    Research output: Contribution to conference › Poster › Research

  121. Published

    On modelling viscoplastic behavior of the solidifying shell in the funnel-type continuous casting mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watziger, J. & Rodrigues, C. M. G., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 529, 1, 012081.

    Research output: Contribution to journal › Conference article › peer-review

  122. Published

    On the Modelling of Macrosegregation during Twin-Roll Casting

    Rodrigues, C. G., Ludwig, A., Kharicha, A., Wu, M. & Vakhrushev, A., 17 Jun 2019, In: IOP Conference Series: Materials Science and Engineering. 2019, 529, 8 p., 012041.

    Research output: Contribution to journal › Conference article › peer-review

  123. Published

    A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 15 Jun 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1334-1350 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  124. E-pub ahead of print

    A GPU solver for symmetric positive-definite matrices vs. traditional codes

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Holzmann, T. & Karimi-Sibaki, E., 7 Mar 2019, (E-pub ahead of print) In: Computers and mathematics with applications. 79.2019, 9, p. 2933-2943 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Volume-Averaged Modeling of Multiphase Flow Phenomena during Alloy Solidification

    Wu, M., Ludwig, A. & Kharicha, A., Feb 2019, In: Metals : open access journal . 9.2019, 2, 229.

    Research output: Contribution to journal › Review article › peer-review

  126. Published

    Calculation Accuracy and Efficiency of a Transient Model for Submerged Entry Nozzle Clogging

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2019, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 3, p. 1429-1443 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    DNS and Engineering Modeling of the Electroslag Remelting Process

    Chaulet, J., Kharicha, A., Dussoubs, B., Charmond, A., Jardy, A. & Hans, S., 2019, p. 107-116.

    Research output: Contribution to conference › Paper › peer-review

  128. Published

    Investigations on Collective Motion of Cathode Spots in the VAR Process

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2019, p. 11-16.

    Research output: Contribution to conference › Paper › peer-review

  129. Published

    Modeling Electrochemical Transport of Ions in the ESR Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2019, p. 131-138.

    Research output: Contribution to conference › Paper › peer-review

  130. Published

    Numerical Investigation of the Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Bohacek, J., Holzgruber, H., Ofner, B., Scheriau, A. & Kubin, M., 2019, p. 55-62.

    Research output: Contribution to conference › Paper › peer-review

  131. Published

    On modelling parasitic solidification due to heat loss at submerged entry nozzle region of continuous casting mold

    Vakhrushev, A., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019.

    Research output: Contribution to conference › Paper › peer-review

  132. Published

    On modelling viscoplastic behaviour of the solidifying shell in the funnel-type continuous casting mold.

    Vakhrushev, A., Kharicha, A., Ludwig, A., Tang, Y., Hackl, G., Watzinger, J. & Gomes Rodrigues, C., 2019.

    Research output: Contribution to conference › Paper › peer-review

  133. Published

    Optimizing the flow conditions in the thin-slab casting mold using electromagnetic brake

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2019, p. 615-619.

    Research output: Contribution to conference › Paper › peer-review

  134. Published

    Using a numerical model to study the transient clogging phenomena in SEN during continuous casting of steel

    Wu, M., Barati, H., Kharicha, A. & Ludwig, A., 2019, p. 664-667.

    Research output: Contribution to conference › Paper › peer-review

  135. 2018
  136. Published

    Numerical Investigation of Collective Motion of Cathode Spots

    Kharicha, A., Karimi-Sibaki, E., Ludwig, A. & Wu, M., 15 Nov 2018, 28th International Symposium on Discharges and Electrical Insulation in Vacuum: ISDEIV. Institute of Electrical and Electronics Engineers, Vol. 2. p. 467-469 3 p. (International Symposium on Discharges and Elevtrical Insultaion in Vacuum, ISDEIV).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  137. Published

    Scale-Adaptive Simulation of Transient Two-Phase Flow in Continuous-Casting Mold

    Liu, Z., Vakhrushev, A., Wu, M., Kharicha, A., Ludwig, A. & Li, B., 30 Oct 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 50.2019, 1, p. 543-554 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Macrosegregation Formation in an Al–Si Casting Sample with Cross-sectional Change During Directional Solidification

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 6 Oct 2018, In: Transactions of the Indian Institute of Metals. 71.2018, 11, p. 2639–2643 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Electro-vortical MHD Interface Instabilities

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., Oct 2018.

    Research output: Contribution to conference › Paper › peer-review

  140. Published

    Modeling of the Twin-Roll Casting Process: Transition from Casting to Rolling

    Rodrigues, C., Ludwig, A., Kharicha, A. & Wu, M., 29 Sept 2018, In: Transactions of the Indian Institute of Metals. 71.2018, November, p. 2645-2649 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 7 Sept 2018, In: Journal of the Electrochemical Society. 165.2018, 11, p. E604-E615 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Effect of an Electrically-Conducting Wall on Transient Magnetohydrodynamic Flow in a Continuous-Casting Mold with an Electromagnetic Brake

    Liu, Z., Vakhrushev, A., Wu, M., Karimi-Sibaki, E., Kharicha, A., Ludwig, A. & Li, B., 4 Aug 2018, In: Metals : open access journal . 8.2018, 8, 14 p., 609.

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Use of a mixed columnar-equiaxed solidification model to analyse the formation of as-cast structure and macrosegregation in a Sn-10 wt% Pb benchmark experiment

    Zheng, Y., Wu, M., Karimi-Sibaki, E., Kharicha, A. & Ludwig, A., 1 Jul 2018, In: International journal of heat and mass transfer. 122.2018, July, p. 939-953 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  144. Published

    Review of amonium chloride properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., 6 Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 63.2018, 9, p. 3170-3183 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  145. Published

    Review of Ammonium Chloride–Water Solution Properties

    Stefan-Kharicha, M., Kharicha, A., Mogeritsch, J., Wu, M. & Ludwig, A., Jun 2018, In: Journal of chemical & engineering data : the ACS journal for data / the ACS journal for data . 2018, 9

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M. & Karimi-Sibaki, E., 12 Mar 2018, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 49.2018, 3, p. 1421-1433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification

    Stefan-Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 14 Feb 2018, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 5, p. 1708-1724 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    A transient model for nozzle clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2 Feb 2018, In: Powder Technology. 329.2018, 15 April, p. 181-198 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Simulation of Non-metallic Inclusion Deposition and Clogging of Nozzle

    Barati, H., Wu, M., Holzmann, T., Kharicha, A. & Ludwig, A., 13 Jan 2018, TMS 2018: CFD Modeling and Simulation in Materials Processing 2018 . p. 149-158 10 p. (Minerals, Metals and Materials : International Symposium on CFD Modeling and Simulation in Materials Processing).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Liu, Z., Wu, M., Kharicha, A., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 1 Jan 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  151. Published

    Review on Modeling and Simulation of Electroslag Remelting

    Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A. & Bohacek, J., 1 Jan 2018, In: Steel research international. 89.2018, 1, 20 p., 1700100.

    Research output: Contribution to journal › Review article › peer-review

  152. Published

    Simulation in metallurgy: Past achievements and future challenges

    Bohacek, J., Koutna, N., Ludwig, A., Rodrigues, C., Karimi-Sibaki, E. & Kharicha, A., 1 Jan 2018, 27th International Conference on Metallurgy and Materials, METAL 2018. p. 28-33 6 p. (IOP Conference Series: Materials Science and Engineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Simulation of As-Cast Steel Ingots

    Wu, M., Ludwig, A. & Kharicha, A., 1 Jan 2018, In: Steel research international. 89.2018, 1, 14 p., 1700037.

    Research output: Contribution to journal › Review article › peer-review

  154. Published

    Concept of semi-continuous castin (SCC) for large steel strand: a numerical study.

    Wu, M., Zheng, Y., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  155. Published

    Discussion on possible solidification during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  156. Published

    "Influence of nucleation and drednrite fragmentation on as-cast structure of Sn-10.0wt.Pb benchmark.

    Zheng, Y., Kharicha, A. & Ludwig, A., 2018, p. 226. 231 p.

    Research output: Contribution to conference › Paper › peer-review

  157. Published

    Investigation on Mesh Sensitivity of a Transiet Model for Nozzle Clogging

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2018, p. 62. 66 p.

    Research output: Contribution to conference › Paper › peer-review

  158. Published

    Numerical modeling of the MHD flow in continuous casting mold by two CFD platforms ANSYS Fluent and OpenFOAM

    Vakhrushev, A., Wu, M., Kharicha, A. & Ludwig, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  159. Published

    Numerical simulation of fluid flow in the mushy zone under rotation magnetic field: Influence of Permeability

    Zhang, H., Wu, M., Zheng, Y., Ludwig, A. & Kharicha, A., 2018.

    Research output: Contribution to conference › Paper › peer-review

  160. 2017
  161. E-pub ahead of print

    Incorporation of fragmentation into a volume average solidification model

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 5 Dec 2017, (E-pub ahead of print) In: Modelling and simulation in materials science and engineering. 26.2018, 1, 18 p., 015004.

    Research output: Contribution to journal › Article › Research › peer-review

  162. Published

    A (non-)hydrostatic free-surface numerical model for two-layer flows

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Karimi-Sibaki, E., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 18 Apr 2017, In: Applied Mathematics and Computation. 319.2018, 15 February, p. 301-317 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    Discussion on Modeling Capability for Macrosegregation

    Wu, M., Kharicha, A. & Ludwig, A., 15 Apr 2017, In: High temperature material processes. 36.2017, 5, p. 531-539 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Numerical Study of the Buoyancy Effect on Magnetohydrodynamic Three-Dimensional LiPb Flow in a Rectangular Duct

    Zahia, T., Faiza, M., Bouabdallah, A., Merah, A. & Kharicha, A., 5 Apr 2017, In: Journal of Fluids Engineering. 139.2017, 6, p. 061201 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Massive Formation of Equiaxed Crystals by Avalanches of Mushy Zone Segments

    Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 16 Mar 2017, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, p. 2927-2931 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”

    Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017

    Research output: Other contribution › Research

  167. Published

    A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot

    Wu, M., Ludwig, A. & Kharicha, A., 2017, In: Applied Mathematical Modelling. 41.2017, January, p. 102-120 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Engineering applications of magnetohydrodynamics

    Kharicha, A., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  169. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 503-507. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  170. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Role of fragmentation in as-cast structure: numerical study and experimental validation

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, In: China Foundry. 14.2017, 5, p. 321-326 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, 8 p., 170001.

    Research output: Contribution to journal › Article › Research › peer-review

  173. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 312-16. 6 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  174. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  175. 2016
  176. Published

    An attempt to model electrode change during the ESR process

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  177. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  178. Published

    Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.

    Research output: Contribution to journal › Conference article › peer-review

  179. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.

    Research output: Contribution to journal › Conference article › peer-review

  180. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

    Research output: Contribution to journal › Conference article › peer-review

  181. Published

    Simulation in Metallurgical Processing: Recent Developments and Future Perspectives

    Ludwig, A., Wu, M. & Kharicha, A., 27 Jun 2016, In: JOM. 68.2016, 8, p. 2191-2197 7 p.

    Research output: Contribution to journal › Review article › peer-review

  182. Published

    On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process

    Karimi Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb 2016, In: Advanced engineering materials. 18.2016, 2, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 25 Jan 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 47.2016, 2, p. 1427-1434 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots

    Ludwig, A., Wu, M. & Kharicha, A., 1 Jan 2016, p. 3-10. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  185. Published

    Free-surface flow in horizontally rotating cylinder: experiment and simulation

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, In: IOP Conference Series: Materials Science and Engineering. p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    Influence of forced convection on solidification and remelting in the developing mushy zone

    Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  187. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification

    Wu, M., Zeng, Y., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Numerical analysis of solidification and macrosegregation in a semi-continuously cast steel strand

    Zheng, Y. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  190. Published

    Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator

    Barati, H. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Paper › peer-review

  193. 2015
  194. Published

    On Macrosegregation

    Ludwig, A., Wu, M. & Kharicha, A., 1 Nov 2015, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, 11, p. 4854-4867 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  195. Published

    Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones

    Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept 2015, In: Transactions of the Indian Institute of Metals. 68, 6, p. 1087-1094 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  196. E-pub ahead of print

    A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 46.2015, 5, p. 2049-2061 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  197. E-pub ahead of print

    An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 30 Apr 2015, (E-pub ahead of print) In: Journal of computational and applied mathematics. 267.2015, 15 September, p. 179-194 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  198. Published

    Experimental and numerical analysis of free surface deformation in an electrically driven flow

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 1 Apr 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  199. Published

    An approximate Riemann solver for two layer shallow water equations in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    An attempt to model electrode change during the ESR process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    An attempt to model shrinkage cavity coupled with macrosegregation in steel ingots

    Wu, M., Ludwig, A. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  202. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  203. Published

    A scale adaptive dendritic envelope model of solidification at mesoscopic scales

    Kharicha, A., Stefan-Kharicha, M., Ludwig, A. & Wu, M., 2015, In: IOP Conference Series: Materials Science and Engineering. 84.2015, 9 p., 012032.

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    A shallow layer model predicting the zinc film thickness during thecontinuous hot-dip galvanizing process

    Kharicha, A., Pfeiler, C., Bohacek, J., Ludwig, A., Wu, M., Mogeritsch, J., Angelini, G. & Riener, C. K., 2015.

    Research output: Contribution to conference › Paper › peer-review

  205. Published

    Assessment of Different Turbulence Models for the Motion of Non-metallic Inclusion in Induction Crucible Furnace

    Barati, H., Wu, M., Ludwig, A. & Kharicha, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Experimental and numerical analysis of free surface deformationin an electrically driven flow

    Kharicha, A., Teplyakov, I., Y., I., Wu, M., Ludwig, A. & Guseva, A., 2015, In: Experimental Thermal and Fluid Science. 62, p. 192-201

    Research output: Contribution to journal › Article › Research › peer-review

  207. Published

    Modelling As-Cast Structure and Macrosegregation in Ingot Casting

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: Materials China. 34, p. 640-651

    Research output: Contribution to journal › Article › Research › peer-review

  208. Published

    Modified shallow water equations with application for horizontal centrifugal casting of rolls

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2015, In: Journal of Fluids Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  209. Published

    Recent Developments and Future Perspectives in Simulation of Metallurgical Processes

    Ludwig, A., Wu, M. & Kharicha, A., 2015, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  210. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  211. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 2015, Int. Symp. on Liquid Metal Processing and Casting (LMPC-15).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  212. Published

    Transport phenomena during solidification of a vertical casting of steel: a multiphase numerical study

    Zheng, Y., Wu, M. & Kharicha, A., 2015, 6th. Int. Conf. "SteelSim 2015", Bordolino, Italy, on data storage device.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  213. Published

    Two-phase modelling of equiaxed crystal sedimentation and thermomechanic stress development in the sedimented packed bed

    Ludwig, A., Vakhrushev, A., Holzmann, T., Wu, M. & Kharicha, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    Using four-phase Eulerian volume averaging approach to model macrosegregation and shrinkage cavity

    Wu, M., Kharicha, A. & Ludwig, A., 2015, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  215. 2014
  216. Published

    Simulation of Horizontal Centrifugal Casting: Mold Filling and Solidification

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 15 Feb 2014, In: ISIJ international. 54.2014, 2, p. 266-274 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  217. Published

    Advanced Process Simulation of Solidification and Melting

    Wu, M., Vakhrushev, A., Karimi Sibaki, E., Kharicha, A. & Ludwig, A., 15 Jan 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159.2014, 1, p. 30-40 11 p.

    Research output: Contribution to journal › Article › Research

  218. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M. H., Ludwig, A., Kharicha, A. & Schumacher, P., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 121-126 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  219. Published

    Simulation of solidification and convection of NH4Cl-H2O solution in a water-cooled copper mold

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 1 Jan 2014, Solidification and Gravity VI. Trans Tech Publications, p. 247-252 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  220. Published

    3D Lattice Boltzmann flow simulations through dendritic mushy zones

    Ludwig, A., Kharicha, A., Hölzl, C., Domitner, J., Wu, M. & Pusztai, T., 2014, In: Engineering analysis with boundary elements. 45, p. 29-35

    Research output: Contribution to journal › Article › Research › peer-review

  221. Published

    Annual report of CD-Lab activity during 2014, Project progress and achievements.

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Vakhrushev, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  222. Published

    "A parameter study on the effect of slag electrode conductivity on the solidification of a large scale ESR ingot"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging, on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  223. Published

    Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2013. p. 247-252 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  224. Published

    "Free surface deformation by the application of electrical currents"

    Kharicha, A., Teplyakov, I., Ivochkin, Y., Wu, M., Ludwig, A. & Guseva, A., 2014, 9th Int. Pamir Conf. on Fundamental and applied MHD, Thermo acoustic and Space technologies. p. 245-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  225. Published

    "How to get a smooth ESR Ingot surface?"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2014, 2nd Int. Conf. Ingot Casting Rolling Forging on data storage device..

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  226. Published

    Influence of crystal morphological parameters on the solidification of ESR ingot

    Karimi Sibaki, E., Kharicha, A., Korp, J., Wu, M. & Ludwig, A., 2014, Materials Science Forum. Vol. 790-791.2014. p. 396-401 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  227. Published

    Influence of dendritic morphology on the calculation of macrosegregation in steel ingot

    Li, J., Wu, M., Ludwig, A., Kharicha, A. & Schumacher, P., 2014, Materials Science Forum Vols. 790-791. p. 121-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  228. Published

    Modeling diffusion-governed solidification of ternary alloys – Part 2:Macroscopic transport phenomena and macrosegregation

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2014, In: Computational materials science. 92, p. 267-285

    Research output: Contribution to journal › Article › Research › peer-review

  229. Published

    Modeling of Multiscale and Multiphase Phenomena in Materials Processing

    Ludwig, A., Kharicha, A. & Wu, M., 2014, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 45.2014, 1, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  230. Published

    "Numerical and experimental study of Horizontal Centrifugal Casting (MCL: A1.16)"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2014

    Research output: Book/Report › Commissioned report › Transfer

  231. Published

    Numerical study of the influence of diffusion-governed growth kinetics of ternary alloy on macrosegregation

    Wu, M. H., Kharicha, A. & Ludwig, A., 2014, Materials Science Forum. Trans Tech Publications, p. 85-90 6 p. (Materials Science Forum; vol. 790-791).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  232. Published

    Observation of flow regimes and transitions during a columnar solidification experiment

    Stefan Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 2014, In: Fluid Dynamics Research. 46, p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  233. Published

    On Melting of Electrodes during Electro-Slag Remelting

    Kharicha, A., Ludwig, A. & Wu, M., 2014, In: ISIJ international. 54, p. 1621-1628

    Research output: Contribution to journal › Article › Research › peer-review

  234. 2013
  235. E-pub ahead of print

    Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Schaden, T. & Reiter, J., 24 Oct 2013, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45.2014, 3, p. 1415-1434 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  236. Published

    Modeling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 13 Jun 2013, In: Computational materials science. 79, p. 830-840 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  237. Published

    Multi-physics simulation of the component attachment within embedding process

    Macurova, K., Kharicha, A., Pletz, M., Mataln, M., Bermejo, R., Schongrundner, R., Krivec, T., Antretter, T., Maia, W., Morianz, M. & Brizoux, M., 1 Apr 2013, 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2013. Institute of Electrical and Electronics Engineers, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  238. Published

    Contribution of the mould current to the ingot surface quality in the electroslag remelting process

    Kharicha, A., Sibaki, E. K., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 95-99 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  239. Published

    Variation of the resistance during the electrode movement in the electroslag remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 1 Jan 2013, International Symposium on Liquid Metal Processing and Casting 2013, LMPC 2013. p. 145-150 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  240. Published

    "2D simulation of ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  241. Published

    3D magneto-hydrodynamic simulation of the liquid region in an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2013, In: International journal of heat and mass transfer.

    Research output: Contribution to journal › Article › Research › peer-review

  242. Published

    "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans"

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, "A meandering sinking flow as possible explanation for the thermohaline staircaises in oceans".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  243. Published

    A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process"

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B. & Ramprecht, M., 2013, A Numerical Study on the Influence of the Frequency of the Applied AC Current on the Electroslag Remelting Process". p. 13-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  244. Published

    Application of microprobe analysis to the reconstruction and characterization of dendritic structures

    Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 607-616

    Research output: Contribution to journal › Article › Research › peer-review

  245. Published

    "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process"

    Kharicha, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 2013, "Contribution of the Mould Current to the Ingor Surface quality in the Electroslag Remelting Process". p. 95-99

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  246. Published

    "Evaluation of a 5-phase mixed columnar-equiaxed solidification model with a benchmark solidification experiment of NH4Cl-H2O solution

    Ahmadein, M., Wu, M., Stefan Kharicha, M., Kharicha, A. & Ludwig, A., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  247. Published

    Exploration of the double-diffusive convection during dendritic solidification with a combined volume-averaging and cellular-automaton model

    Stefan-Kharicha, M., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  248. Published

    Half Year Report Q1-2/2013 "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  249. Published

    “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”

    Kharicha, A., Wu, M. & Ludwig, A., 2013, “MHD and multiphase phenomena in an industrial scale electro-slag remelting process”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  250. Published

    "MHD in electric current-induced flow"

    Kharicha, A., Wu, M. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  251. Published

    "MHD instabilities of bath/liquid metal interface”

    Kharicha, A., Ludwig, A. & Wu, M., 2013, "MHD instabilities of bath/liquid metal interface”.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  252. Published

    Minutes of the spring meeting on project "Numerical and experimental study of Horizontal Centrifugal Casting"

    Bohacek, J., Kharicha, A. & Ludwig, A., 2013

    Research output: Book/Report › Commissioned report › Transfer

  253. Published

    Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

    Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Modelling diffusion-governed solidification of ternary alloys - Part 1: Coupling solidification kinetics with thermodynamics

    Wu, M., Li, J., Ludwig, A. & Kharicha, A., 2013, In: Computational materials science. 79, p. 830-840

    Research output: Contribution to journal › Article › Research › peer-review

  255. Published

    Modelling macrosegregation in a 2.45 ton steel ingot

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  256. Published

    "Numerical modeling of centrifugal casting: FLUENT vs. own code in MATLAB"

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  257. Published

    "Numerical study of horizontal centrifugal casting of HSS work roll"

    Bohacek, J., Ludwig, A. & Kharicha, A., 2013, "Numerical study of horizontal centrifugal casting of HSS work roll".

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  258. Published

    "Parameter study of large scale ESR process"

    Karimi Sibaki, E., Kharicha, A. & Wu, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  259. Published

    Shallow Water Model for Horizontal Centrifugal Casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    Simulation of macrosegregation in a 2.45-ton steel ingot using a three-phase mixed columnar-equiaxed model

    Li, J., Wu, M., Ludwig, A. & Kharicha, A., 2013, In: International journal of heat and mass transfer. 72.2014, May, p. 668-679 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  261. Published

    Simulation of the voltage signal during the formation and the departure of a droplet in the electro-slag Remelting process

    Kharicha, A., Wu, M. & Ludwig, A., 2013, In: International journal of thermal sciences.

    Research output: Contribution to journal › Article › Research › peer-review

  262. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 650-660

    Research output: Contribution to journal › Article › Research › peer-review

  263. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, p. 661-668

    Research output: Contribution to journal › Article › Research › peer-review

  264. Published

    Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase PIV technique

    Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, McWASP XIII. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  265. Published

    "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations"

    Wu, M., Kharicha, A. & Ludwig, A., 2013, "Using a Three Phase Mixed Columnar-Equiaxed Solidification Model to Study Macrosegregation in Ingot Casting: Perspectives and Limitations". p. 171-180

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. Published

    "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process"

    Kharicha, A., Wu, M. & Ludwig, A., 2013, "Variation of the Resistance During the Elektrode Movement in the Electroslag Remelting Process". p. 145-150

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  267. 2012
  268. Published

    Modeling of Multiscale and Multiphase Phenomena in Material Processing

    Ludwig, A., Kharicha, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. p. 147 - 161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  269. Published

    Vibrations induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing - Held During the TMS 2012 Annual Meeting and Exhibition. Orlando: TMS, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  270. Published

    Vibrations Induced Flow in a Horizontal Centrifugal Casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 15 May 2012, CFD Modeling and Simulation in Materials Processing. John Wiley & Sons, Großbritannien, p. 227-234 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  271. Published

    Influence of the earth magnetic field on electrically induced flows

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2012, In: Journal of iron and steel research international. 19, p. 63-66

    Research output: Contribution to journal › Article › Research › peer-review

  272. Published

    Influence of the frequency of the applied AC current on the electroslag remelting process

    Kharicha, A., Wu, M., Ludwig, A., Ramprecht, M. & Holzgruber, H., 2012, CFD Modeling and Simulation in Materials Processing: Proceedings of a symposium sponsored by Association for Iron and Steel Technology and the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012. p. 139-146

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  273. Published

    Investigations on the origin of radial distribution of non-metallic inclusions in ESR ingot

    Kharicha, A., Körp, J., Kubin, M., Wu, M. & Ludwig, A., 2012, CLEANSTEEL8. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  274. Published

    Modeling of multiphase and multiscale phenomena in materials processing

    Ludwig, A., Kharicha, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processin. p. 149-161

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  275. Published

    Multiphase modelling of the macrosegregation in ingot castings

    Wu, M., Li, J., Kharicha, A. & Ludwig, A., 2012, ICRF-2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  276. Published

    Numerical study of the influence of mold filling conditions on the as-cast structure of Al-4 wt.% Cu ingots

    Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, International Conf. on Engineering and Technology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  277. Published

    Simulation of channel segregation using a two-phase columnar solidification model, Part II: Mechanism and parameter study

    Li, J., Wu, M., Hao, J., Kharicha, A. & Ludwig, A., 2012, In: Computational materials science. 55, p. 419-429

    Research output: Contribution to journal › Article › Research › peer-review

  278. Published

    Simulation of the as-cast structure of Al-4.0wt.%Cu ingots with a 5-phase mixed columnar-equiaxed solidification model

    Wu, M., Ahmadein, M., Kharicha, A. & Ludwig, A., 2012, McWASP XIII. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  279. Published

    “Simultaneous observation of melt flow and motion of equiaxed crystals during solidification

    Kharicha, A., 2012, Metall. Mater. Trans. A.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  280. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  281. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  282. 2011
  283. Published

    Simulation of the Deformation of a Flexible Combo Bag in a DC Aluminium Casting

    Kharicha, A., Ludwig, A. & Wu, M., 20 Apr 2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. Vol. 2. p. 273-278 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  284. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012016-1-012016-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  285. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  286. Published

    3d simulation of the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of the TMS Annual Meeting. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  287. Published

    3D simulation of the melting during an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 41-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  288. Published

    Droplet formation in small electroslag remelting processes

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  289. Published

    Liquid metal inside a horizontally rotating cylinder under vibrations

    Bohàcek, J., Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of Experimental Fluid Mechanics (EFM 2011). p. 564-573

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  290. Published

    Simulation of the deformation of a flexible combo bag in a DC aluminium casting

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of TMS Annual Meeting. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  291. Published

    Simulation of the melting of a flat electrode during an elektroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 19.1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  292. Published

    Spatio-temporal variation of the electromagnetic field during the electroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, 8th Int. Pamir Conf. on Fund. and Applied MHD (PAMIR). p. 695-699

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  293. Published

    Thermal state of the electrode during the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Liquid Metal Processing and Casting. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  294. 2010
  295. Published

    3-D microprobe analysis of dendritic structures in steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 30 Nov 2010, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010. p. 735-743 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  296. Published

    3D Microprobe Analysis of Dendritic Structures in Steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 2010,

    Proceedings of the International Conference on Materials Science & Technology (MS&T'10)

    .     p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  297. Published

    A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification

    Ludwig, A., Kharicha, A. & Domitner, J., 2010, A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification. p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  298. Published

    Importance of Melt Flow in Solidifying Mushy Zone

    Wu, M., Vakhrushev, A., Nunner, G., Pfeiler, C., Kharicha, A. & Ludwig, A., 2010, In: The open transport phenomena journal . 5, 2, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  299. Published

    Influence of an imposed vertical current on the droplet formation during a melting process

    Kharicha, A. & Ludwig, A., 2010, Influence of an imposed vertical current on the droplet formation during a melting process. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  300. Published

    Influence of the slag/pool interface on the solidification in an electroslag remelting process

    Kharicha, A., Schuetzenhoefer, W., Ludwig, A. & Reiter, G., 2010, In: Materials Science Forum . p. 229-236

    Research output: Contribution to journal › Article › Research › peer-review

  301. Published

    Interaction of a Flexible Combo Bag with the Flow in a DC Aluminium Casting DGM

    Kharicha, A., Ludwig, A. & Wu, M., 2010, Symposium Stranggiessen 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  302. Published

    On the origin of the resistance swing during the Electro-Slag remelting process

    Kharicha, A., 2010, On the origin of the resistance swing during the Electro-Slag remelting process. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  303. Published

    Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns

    Domitner, J., Kharicha, A., Grasser, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 644-651

    Research output: Contribution to journal › Article › Research › peer-review

  304. 2009
  305. Published

    Numerical and experimental investigations on the ESR process of the hot work tool steel H11

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 1 Dec 2009, LMPC 2009 - Proceedings of the International Symposium on Liquid Metal Processing and Casting. p. 235-242 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  306. Published

    Reformulation of time averaged Joule heating in presence of temperature fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 155-159 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  307. Published

    Experimental and numerical modeling of the flow field in an industrial bronze caster - Improving the numerical model

    Eck, S., Pfeiler, C., Kharicha, A., Ludwig, A. & Evans, J. W., 24 Jun 2009, TMS Annual Meeting. p. 635-642 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  308. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 1: Experimental results

    Stefan Kharicha, M., Eck, S., Könözsy, L., Kharicha, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 168 - 171 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  309. Published

    Reformulation of the Time Averaged Joule Heating in the Presence of Temperature Fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2009, In: International journal of cast metals research. 22, p. 155-159

    Research output: Contribution to journal › Article › Research › peer-review

  310. 2008
  311. Published

    Modeling of the ESR Slag/pool interface with a VOF method

    Kharicha, A., 2008, 5th Int. Conf. on Solidification and Gravity (SG08).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  312. Published

    On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636

    Research output: Contribution to journal › Article › Research › peer-review

  313. Published

    Solidification and Particle Entrapment during Continuous Casting of Steel

    Pfeiler, C., Thomas, B. G., Wu, M., Ludwig, A. & Kharicha, A., 2008, In: Steel research international. 79, p. 599-607

    Research output: Contribution to journal › Article › Research › peer-review

  314. 2007
  315. Published

    Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity

    Kharicha, A., Ludwig, A. & Wu, M., 2007, Correct electric current paths in a multiphase process involving two phases with large difference in electric conductivity.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  316. Published

    Interaction between steel droplets and slag in the ESR process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Interaction between steel droplets and slag in the ESR process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  317. Published

    Multiphase Modelling of the Slag Region in the ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 2007, Multiphase Modelling of the Slag Region in the ESR Process. p. 107-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  318. Published

    On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2007, On the Importance of the Electric Currents Flowing directly into the Mould during an ESR Process. p. 105-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  319. Published

    Selected Numerical Investigations on ESR Process

    Kharicha, A., Mackenbrock, A., Ludwig, A., Schützenhöfer, W., Maronnier, V., Wu, M., Köser, O. & Tanzer, R., 2007, Selected Numerical Investigations on ESR Process. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  320. 2006
  321. Published

    Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique

    Ludwig, A., Kharicha, A., Schuetzenhoefer, W. & Reiter, G., 2006, Simulation of the Slag/Pool Interface in the ESR Process by Using a VOF Technique. p. 985-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  322. 2005
  323. Published

    Hydrodynamic Study of a Rotating MHD Flow in a Cylindrical Cavity by Ultrasound Doppler Shift Method

    Kharicha, A., Alemany, A. & Bornas, D., 2005, In: International journal of engineering science. 43, p. 589-615

    Research output: Contribution to journal › Article › Research › peer-review

  324. Published

    Shape and Stability of the Slag/Melt Interface in a Small DC ESR Process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, p. 129-134

    Research output: Contribution to journal › Article › Research › peer-review

  325. Published

    Simulation of droplet formation during DC Electroslag-remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2005, Int. Conf. on “Simulation and Modelling of Metallurgical Processes in Steelmaking”. p. 343-360

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Contact

Phone: 3100

Latest Research Output

View more (305)