Montanuniversität

Organisational unit: University

2101 - 2200 out of 33,892Page size: 100

Research output

  1. 2023
  2. E-pub ahead of print

    Small-scale fracture mechanical investigations on grain boundary doped ultrafine-grained tungsten

    Wurmshuber, M., Alfreider, M., Wurster, S., Burtscher, M., Pippan, R. & Kiener, D., 28 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 12 p., 118878.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Bonding Performance of Surface-Treated Zirconia Cantilevered Resin-Bonded Fixed Dental Prostheses: In Vitro Evaluation and Finite Element Analysis

    Malgaj, T., Papšík, R., Abram, A., Kocjan, A. & Jevnikar, P., 27 Mar 2023, In: Materials. 16, 7, 15 p., 2646.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Investigation of ferroelectricity in BaTiO3-relaxors by PFM

    Münzer, P., Kratzer, M., Maier, C., Reichmann, K., Deluca, M. & Teichert, C., 27 Mar 2023.

    Research output: Contribution to conference › Poster › Transfer › peer-review

  5. Published

    On the Wear Behaviour of Bush Drive Chains: Part II—Performance Screening of Pin Materials and Lubricant Effects

    Summer, F., Bergmann, P. & Grün, F., 25 Mar 2023, In: Lubricants. 11.2023, 4, 24 p., 157.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    The Behaviour of Minor Metals in BOF Slag Under Different Additives

    Haslinger, G., Leuchtenmüller, M. & Steinlechner, S., 25 Mar 2023, Rare Metal Technology 2023. Ouchi, T., Forsberg, K., Azimi, G., Alam, S., Neelameggham, N. R., Kim, H., Baba, A. A., Peng, H. & Karamalidis, A. (eds.). p. 287-296 10 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Residual Stress Evolution in Low-Alloyed Steel at Three Different Length Scales

    Leitner, S., Winter, G., Klarner, J., Antretter, T. & Ecker, W., 23 Mar 2023, In: Materials. 16.2023, 7, 17 p., 2568.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Thermodynamic modeling of the Fe-Sn system including an experimental re-assessment of the liquid miscibility gap

    Park, W.-B., Bernhard, M. C., Presoly, P. & Kang, Y.-B., 23 Mar 2023, In: Journal of Materials Informatics. 3.2023, 5, 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Digital Process Monitoring of Stationary Processing Equipment—A Step Toward an Optimized Digital Processing Plant: Presentation of a PhD-Project

    Krukenfellner, P. & Flachberger, H., 22 Mar 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 4, p. 184-187 4 p.

    Research output: Contribution to journal › Article › Research

  10. Published

    The effect of HPAM polymer for enhanced oil recovery on corrosion behaviour of a carbon steel and interaction with the inhibitor under simulated brine conditions

    Moshtaghi, M., Eskinja, M., Mori, G. K., Grießer, T., Safyari, M. & Cole, I., 22 Mar 2023, In: Corrosion science. 217.2023, June, 20 p., 111118.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Evaluation of inductively heated laboratory continuous casting plant for alloy design

    Weidinger, A., 21 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  12. E-pub ahead of print

    From high-entropy alloys to high-entropy ceramics: The radiation-resistant highly concentrated refractory carbide (CrNbTaTiW)C

    Tunes, M., Fritze, S., Osinger, B., Willenshofer, P., Alvarado, A. M., Martinez, E., Menon, A. S., Ström, P., Greaves, G., Lewin, E., Jansson, U., Pogatscher, S., Saleh, T. A., Vishnyakov, V. M. & El-Atwani, O., 21 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 15 p., 118856.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Hugo Bondy (1900–1985): an Austrian scientist of mass spectrometry in the twentieth century

    Schober, M., Irrgeher, J. & Prohaska, T., 21 Mar 2023, In: Monatshefte für Chemie = Chemical monthly. 154.2023, 4, p. 293-323 31 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    Exsolved catalyst particles as a plaything of atmosphere and electrochemistry

    Summerer, H., Nenning, A., Rameshan, C. & Opitz, A. K., 20 Mar 2023, (E-pub ahead of print) In: EES Catalysis. 1.2023, 3, p. 274-289 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Grain boundary mobility of γ-Fe in high-purity iron during isothermal annealing

    Kern, M., Bernhard, M. C., Bernhard, C. & Kang, Y.-B., 20 Mar 2023, In: Scripta Materialia. 230.2023, June, 7 p., 115431.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    On The Applicability Of Welded J55 Line Pipe Steel For Underground Hydrogen Storage

    Loder, B., 20 Mar 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    On The Applicability Of Welded J55 Line Pipe Steel For Underground Hydrogen Storage

    Loder, B., Mori, G. K., Klarner, J., Fiedler, M. & Willidal, T., 20 Mar 2023, AMPP Annual Conference & Expo 2023: Paper No. 19131. 15 p. 19131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. E-pub ahead of print

    Phosphorus and transition metal co-segregation in ferritic iron grain boundaries and its effects on cohesion

    Mai, H. L., Cui, X.-Y., Scheiber, D., Romaner, L. & Ringer, S. P., 20 Mar 2023, (E-pub ahead of print) In: Acta materialia. 250.2023, 15 May, 17 p., 118850.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Primary Intermetallic Phases in Crossover Alloys with high content of Fe and Si

    Samberger, S., 20 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G. G., 20 Mar 2023, In: Science and Engineering of Composite Materials. 30.2023, 1, 12 p., 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The Interaction of Quaternary Ammonium Compounds based Corrosion Inhibitor with Carbon Steel in CO2 Saturated NaCl Solution

    Eskinja, M., Moshtaghi, M., Mori, G. K., Hönig, S. & Zehethofer, G., 20 Mar 2023, p. 1. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    An inverse finite element approach for the evaluation of the hot torsion test

    Wenda, A., Haslberger, P., Kaiser, R., Ralph, B. J., Stockinger, M. & Zamberger, S., 18 Mar 2023, p. 6-13. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Feasibility study for the Finite Element Analysis of Wire-Arc Additive Manufactured Ti-6Al-4V in DEFORM® 12.1

    Czipin, M., Hartl, K. & Stockinger, M., 18 Mar 2023, XLI. Verformungskundliches Kolloquium. p. 32-37 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    A TEM study of a dislocations in the ßo phase of an intermetallic TNM-TiAl alloy

    Molénat, G., Monchoux, J.-P., Musi, M., Spörk-Erdely, P., Clemens, H. & Couret, A., 15 Mar 2023, In: Scripta materialia. 226.2023, 15 March, 6 p., 115247.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Electronic and ionic effects of sulphur and other acidic adsorbates on the surface of an SOFC cathode material

    Siebenhofer, M., Nenning, A., Wilson, G. E., Kilner, J. A., Rameshan, C., Kubicek, M., Fleig, J. & Blaha, P., 15 Mar 2023, In: Journal of Materials Chemistry A. 11.2023, 13, p. 7213-7226 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Energy-Based Fatigue Assessment of Defect-Afflicted Cast Steel Components by Means of a Linear-Elastic Approach

    Horvath, M., Oberreiter, M. & Stoschka, M., 15 Mar 2023, In: Applied Sciences : open access journal. 13.2023, 6, 23 p., 3768.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Two-Phase Flow Coordination Characteristics of H62 Brass Alloy Prepared by Up-Drawing Continuous Casting

    Li, B., Fu, Q., Yu, R., Lin, Z., Wang, J., Wang, X., Guan, R. & LI, J., 15 Mar 2023, In: Metals : open access journal . 13.2023, 3, 12 p., 599.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Exsolution on perovskite oxides: morphology and anchorage of nanoparticles

    Ruh, T., Berkovec, D., Schrenk, F. & Rameshan, C., 14 Mar 2023, In: Chemical Communications. 59.2023, 27, p. 3948-3956 9 p.

    Research output: Contribution to journal › Review article › peer-review

  32. Published

    Link between cracking mechanisms of trilayer films on flexible substrates and electro-mechanical reliability under biaxial loading

    Altaf Husain, S., Kreiml, P., Renault, P.-O., Mitterer, C., Cordill, M. J. & Faurie, D., 14 Mar 2023, In: Journal of vacuum science & technology / A (JVST). 41.2023, 3, 8 p., 033403.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

    Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Collisions of digit sums in bases 2 and 3

    Spiegelhofer, L., 13 Mar 2023, In: Israel journal of mathematics. 258.2023, December, p. 475–502 28 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Hydrogen embrittlement characteristicsin cold-drawn high-strength stainless steel wires

    Truschner, M., Kroll, R., Eichinger, M., Keplinger, A., Engelberg, D. L. & Mori, G. K., 13 Mar 2023, (E-pub ahead of print) In: Corrosion science. 216.2023, 15 May, 111109.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Phase Transition of Magnetite Ore Fines During Oxidation Probed by In Situ High-Temperature X-Ray Diffraction

    Zheng, H., Daghagheleh, O., Ma, Y., Taferner, B., Schenk, J. & Kapelyushin, Y., 13 Mar 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, 3, p. 1195-1204 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4 V parts

    Springer, S., Seisenbacher, B., Leitner, M., Grün, F., Gruber, T., Lasnik, M. & Oberwinkler, B., 11 Mar 2023, In: Welding in the world. 67.2023, April, p. 997-1007 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 11 Mar 2023, In: International journal of heat and mass transfer. 280.2023, July, 15 p., 124050.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Analysing sector coupling technologies for Re-purposing coal-fired power plants–Case study for the ENTSO-E grid

    Traupmann, A., Greiml, M., Steinegger, J., Kühberger, L. & Kienberger, T., 10 Mar 2023, In: IET Energy systems integration. 5.2023, 1, p. 95-118 24 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Impact of Iron Ore Pre-Reduction Degree on the Hydrogen Plasma Smelting Reduction Process

    Ernst, D., Manzoor, U., Souza Filho, I. R., Zarl, M. A. & Schenk, J., 10 Mar 2023, In: Metals. 13.2023, 3, 18 p., 558.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    At the beginning of Project ReSoURCE: First steps in obtaining a comprehensive database on spent refractories

    Feucht, F., Sedlazeck, K. P., Friedrich, K., Sattler, T. M. & Pomberger, R., 9 Mar 2023, 12. Wissenschaftskongress: Abfall- und Ressourcenwirtschaft. Hamburg: Innsbruck Univ. Press, Vol. 12. p. 217-221 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. E-pub ahead of print

    Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature

    Galakhova, A., Kadisch, F., Mori, G. K., Heyder, S., Wieser, H., Sartory, B., Wosik, J., Schwarz, S. & Burger, S., 9 Mar 2023, (E-pub ahead of print) In: Journal of Materials Engineering and Performance. 32.2023, October, p. 9153–9162 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Multiscale microstructures, mechanical properties and electrical conductivity of in-situ dual-size TiB2 particles reinforced 6201 aluminum matrix composites

    Zhao, K., Liu, X., Fang, Y., Guo, E., Kang, H., Hao, Z., LI, J., Du, G., Liu, L., Chen, Z. & Wang, T., 7 Mar 2023, In: Journal of Materials Research and Technology. 23.2023, March-April, p. 5459-5473 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    DEVICE FOR GUIDING A MATERIAL FLOW FLOWING OUT FROM A DISCHARGE END OR DELIVERY END OF A CONVEYING APPARATUS

    Prenner, M. (Inventor) & Dünnwald, W. (Inventor), 4 Mar 2023, IPC No. 65G 15/16 (2006.01), B65G 37/00 (2006.01), B65G 15/08 (2006.01) , B65G 15/22 (2006.01), B65G 47/53 (2006.01), B65G 47/44 (2006.01), Patent No. EP 3 947 211 B1

    Research output: Patent

  47. E-pub ahead of print

    Fatigue crack growth behavior of a nanocrystalline low Young's modulus β-type Ti–Nb alloy

    Pillmeier, S., Pippan, R., Eckert, J. & Hohenwarter, A., 4 Mar 2023, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 871.2023, 26 April, 12 p., 144868.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Re-Mining of Waste Rock Dumps from a Closed Lead–Zinc Mine—Characterisation of the Residuals

    Marousek, L., Dollinger, S., Elmer, S., Öfner, W., Nußbacher, H., Melcher, F. & Flachberger, H., 4 Mar 2023, In: Minerals. 13.2023, 3, 20 p., 361.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Influence of focus offset on the microstructure of an intermetallic γ-TiAl based alloy produced by electron beam powder bed fusion

    Ghibaudo, C., Wartbichler, R., Marchese, G., Clemens, H., Ugues, D. & Biamino, S., 3 Mar 2023, In: Journal of manufacturing processes. 89.2023, 3 March, p. 132-141 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    The Role of Competence Profiles in Industry 5.0-Related Vocational Education and Training: Exemplary Development of a Competence Profile for Industrial Logistics Engineering Education

    Pacher, C., Woschank, M. & Zunk, B. M., 3 Mar 2023, In: Applied Sciences : open access journal. 13.2023, 5, p. 3280 15 p., 3280.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Deformation Induced Structure and Property Changes in a Nanostructured Multiphase CrMnFeCoNi High-Entropy Alloy

    Schuh, B., Issa, I., Müller, T., Kremmer, T., Gammer, C., Pippan, R. & Hohenwarter, A., 2 Mar 2023, In: Nanomaterials. 13.2023, 5, 12 p., 924.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of boron doping on grain boundary cohesion in technically pure molybdenum investigated via meso-scale three-point-bending tests

    Jakob, S., Hohenwarter, A., Lorich, A., Knabl, W., Pippan, R., Clemens, H. & Maier-Kiener, V., 2 Mar 2023, In: International journal of refractory metals & hard materials. 113.2023, June, 4 p., 106173.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Interactions of Hydraulic Fractures With Grain Boundary Discontinuities in the Near Wellbore Region

    Yoshioka, K., Katou, M., Tamura, K., Arima, Y., Ito, Y., Chen, Y. & Ishida, T., 2 Mar 2023, In: Journal of geophysical research. 128.2023, 3, 22 p., e2022JB024509.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A new quasi-dynamic load flow calculation for district heating networks

    Steinegger, J., Wallner, S., Greiml, M. & Kienberger, T., 1 Mar 2023, In: Energy. 266.2023, 1 March, 17 p., 126410.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Ermittlung von Schüttgutparametern für die Durchführung von Diskrete Elemente Simulationen

    Prenner, M., Denzel, M. & Lux, G., Mar 2023, 17 p.

    Research output: Book/Report › Commissioned report › Research

  56. Published

    Förderkonzept für den stetigen Transport von Festgestein

    Hartmann, T., Jonke, M., Denzel, M. & Prenner, M., Mar 2023, 39 p.

    Research output: Book/Report › Commissioned report › Research

  57. Published

    Hybridizing Lithography-Based Ceramic Additive Manufacturing with Two-Photon-Polymerization

    Sänger, J. C., Schwentenwein, M., Bermejo, R. & Günster, J., Mar 2023, In: Applied Sciences (Switzerland). 13, 6, 3974.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Influence of platform preheating on in situ precipitation in an FeCoMo alloy during laser powder bed fusion

    Cui, C., Leitner, H., Platl, J. & Schnitzer, R., Mar 2023, In: Materials characterization. 197.2023, March, 10 p., 112689.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    In-situ transmission electron microscopy analysis of the degree of heterogeneities in a metallic glass

    Zhang, N. Z., Sun, K., Şopu, D., Spieckermann, F., Ma, X., Geng, C., Bian, X., Jia, Y., Wang, Q., Wang, G. & Eckert, J., Mar 2023, In: Intermetallics. 154.2023, March, 10 p., 107807.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Novel Structural and Functional Material Properties Enabled by Nanocomposite Design

    Eckert, J. (Editor) & Kiener, D. (Editor), Mar 2023, Multidisciplinary Digital Publishing Institute (MDPI).

    Research output: Book/Report › Book › Research

  61. Published

    RFID - Tool zur Partikelverfolgung in der Abfallwirtschaft

    Rizvan, A., Khodier, K. & Sarc, R., Mar 2023.

    Research output: Contribution to conference › Poster › Research

  62. Published

    Gaps in the Thue-Morse word

    Spiegelhofer, L., 25 Feb 2023, In: Journal of the Australian Mathematical Society. 114.2023, 1, p. 110-144 35 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. E-pub ahead of print

    Large-scale underground hydrogen storage: Integrated modeling of reservoir-wellbore system

    Abdellatif, M., Hashemi, M. & Azizmohammadi, S., 24 Feb 2023, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 48.2023, 50, p. 19160-19171 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    A Tabu Search Matheuristic for the Generalized Quadratic Assignment Problem

    Greistorfer, P., Stanek, R. & Maniezzo, V., 23 Feb 2023, Metaheuristics: 14th International Conference, MIC 2022, Syracuse, Italy, July 11–14, 2022, Proceedings. 1 ed. Vol. 13838. p. 544-553 10 p. (Lecture Notes in Computer Science; vol. 13838).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    3D Tomography across the Balmuccia Peridotite, Ivrea Zone, Italy - Project DIVE, phase two

    Pasiecznik, D., Greenwood, A., Hetényi, G. & Bleibinhaus, F., 22 Feb 2023. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  66. E-pub ahead of print

    Microstructural influences on fatigue threshold behavior and fracture toughness of an additively manufactured γ-titanium aluminide

    Zeiler, S., Lintner, A., Schloffer, M., Pippan, R. & Hohenwarter, A., 22 Feb 2023, (E-pub ahead of print) In: Intermetallics. 156.2023, May, 9 p., 107852.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Kharicha, A., 21 Feb 2023, In: Metals : open access journal . 13.2023, 3, 21 p., 444.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 21 Feb 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, April, p. 880-894 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. E-pub ahead of print

    Mass transfer model of packed seawater scrubbers for marine exhaust gas cleaning

    Schlager, M., Baumfrisch, M., Haushofer, G., Wolf-Zöllner, V. & Lehner, M., 20 Feb 2023, (E-pub ahead of print) In: Chemical Engineering Research and Design. 192.2023, April, p. 128-140 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Grießer, T. & Sangermano, M., 18 Feb 2023, In: Polymers. 15.2023, 4, 12 p., 1024.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Wear simulation in lubricated contacts considering wear-dependent surface topography changes

    Maier, M., Pusterhofer, M. & Grün, F., 18 Feb 2023, (E-pub ahead of print) In: Materials Today: Proceedings. 93.2023, 4, p. 563-570 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Entwicklung des Raumwärmebedarfs in Österreich unter der Berücksichtigung der Nutzung von Gas und des Ziels der Klimaneutralität bis 2040

    Felber, B., Baumann, M., Cvetkovska, R. & Nagovnak, P., 17 Feb 2023.

    Research output: Contribution to conference › Paper › peer-review

  73. Published

    Linearisierung von komplexen industriellen Energiesystemen für die Betriebsoptimierung

    Kurz, T., Gradl, P. (Co-editor) & Kienberger, T. (Co-editor), 17 Feb 2023.

    Research output: Contribution to conference › Abstract › peer-review

  74. Published

    Linearisierung von komplexen industriellen Energiesystemen für die Betriebsoptimierung

    Kurz, T., Gradl, P. (Co-editor) & Kienberger, T. (Co-editor), 17 Feb 2023.

    Research output: Contribution to conference › Paper › peer-review

  75. Published

    A Predictive Model of Community Disaster Resilience based on Social Identity Influences

    Cvetković, V. M., 16 Feb 2023

    Research output: Other contribution › Research

  76. Published

    Comparative Analysis of Disaster Risk Management Systems in Germany, USA, Russia and China

    Cvetković, V. M. & Andrić, K., 16 Feb 2023

    Research output: Other contribution › Research

  77. Published

    Industrial energy demand and GHG emission scenarios under changing technologies - an Austrian case study Abstract

    Nagovnak, P. & Schützenhofer, C., 16 Feb 2023.

    Research output: Contribution to conference › Paper › peer-review

  78. Published

    On the Wear Behavior of Bush Drive Chains: Part I—Characterization of Engine Damage Processes and Development of a Model Test Setup for Pin Wear

    Summer, F., Bergmann, P. & Grün, F., 16 Feb 2023, In: Lubricants. 11.2023, 2, 20 p., 85.

    Research output: Contribution to journal › Article › Research › peer-review

  79. E-pub ahead of print

    Pre-eruptive storage conditions and magmatic evolution of the Bora-Baricha-Tullu Moye volcanic system, Main Ethiopian Rift

    Tadesse, A. Z., Fontijn, K., Caricchi, Bégué, F., Gudbrandsson, S., Smith, V., Gopon, P., Debaille, V., Laha, P., Terryn, H. A., Yirgu, G. & Ayalew, D., 16 Feb 2023, (E-pub ahead of print) In: Lithos. 442-443.2023, April, 20 p., 107088.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Untersuchung der Kopplung eines rSOC-Systems zur Industrie

    Banasiak, D., 16 Feb 2023.

    Research output: Contribution to conference › Paper › peer-review

  81. E-pub ahead of print

    Effect of integrated austempering and Q&P treatment on the transformation kinetics, microstructure and mechanical properties of a medium-carbon steel

    Liu, M., Hu, H., Kern, M., Lederhaas, B., Xu, G. & Bernhard, C., 15 Feb 2023, (E-pub ahead of print) In: Materials Science and Engineering A. 869.2023, 24 March, 12 p., 144780.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Exploring the anneal hardening phenomenon in nanocrystalline Pt-Ru alloys

    Renk, O., Hohenwarter, A., Maier-Kiener, V. & Pippan, R., 15 Feb 2023, In: Journal of alloys and compounds. 935.2023, Part 1, 15 February, 11 p., 168005.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Hypo-peritectic TRIS–NPG in a stationary temperature gradient: Thermodynamics, grain boundary migration and phase identification

    Ludwig, A., Mogeritsch, J. P. & Witusiewicz, V. T., 15 Feb 2023, In: Journal of crystal growth. 604.2023, 15 February, 9 p., 127052.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    International tunneller meeting in Leoben

    Galler, R., 15 Feb 2023, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 16.2023, 1, p. 1 2 p.

    Research output: Contribution to journal › Editorial

  85. E-pub ahead of print

    Optimization of the Two- and Three-DimensionalCharacterization of Rare Earth-Traced Deoxidation Products

    Thiele, K., Musi, R., Ramesh Babu, S. & Michelic, S. K., 15 Feb 2023, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 11, 12 p., 2201748.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Probing the composition dependence of residual stress distribution in tungsten-titanium nanocrystalline thin films

    Sinojiya, R. J., Paulachan, P., Falah Chamasemani, F., Bodlos, R., Hammer, R., Zalesak, J., Reisinger, M., Scheiber, D., Keckes, J., Romaner, L. & Brunner, R., 15 Feb 2023, In: Communications materials. 2023, 4, 12 p., 11.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Thermal stability of MoNbTaTiW, MoNbTaVW and CrMoNbTaW thin films deposited by high power impulse magnetron sputtering

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. & Franz, R., 15 Feb 2023, In: Surface & coatings technology. 454.2023, 15 February, 7 p., 129189.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space Applications

    Gleirscher, M., Wolfberger, A., Schlögl, S., Hołyńska, M. & Hausberger, A., 14 Feb 2023, In: Lubricants. 11.2023, 2, 15 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Electrical monitoring of organic crystal phase transition using MoS2 field effect transistor

    Boulet, I., Pascal, S., Bedu, F., Ozerov, I., Ranguis, A., Leoni, T., Becker, C., Masson, L., Matkovic, A., Teichert, C., Siri, O., Attaccalite, C., Huntzinger, J. R., Paillet, M., Zahab, A. & Parret, R., 14 Feb 2023, In: Nanoscale advances. 5.2023, 6, p. 1681-1690 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  90. E-pub ahead of print

    Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors

    Bautista-Anguís, D., Wolfberger, A., Rabe, M., Tomaszczyk, S. & Schlögl, S., 14 Feb 2023, (E-pub ahead of print) In: Progress in organic coatings. 178.2023, May, 11 p., 107444.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Improving and degrading the oxygen exchange kinetics of La0.6Sr0.4CoO3−δ by Sr decoration

    Siebenhofer, M., Riedl, C., Nenning, A., Artner, W., Rameshan, C., Opitz, A. K., Fleig, J. & Kubicek, M., 13 Feb 2023, In: Journal of Materials Chemistry A. 11.2023, 24, p. 12827-12836 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Analyse der Prozesskostenzusammensetzung bei der Herstellung additiv gefertigter, metallischer Bauteile in Kleinst- und Kleinserien durch pulverbettbasiertes Laserstrahlschmelzen

    Bodner, S. C., 12 Feb 2023, 103 p.

    Research output: Thesis › Master's Thesis

  93. Published

    Exsolution from Dually Doped Perovskite Oxides

    Lindenthal, L., Drexler, H., Rollenitz, J., Rocha, T., Mori, T., Borges, L. & Rameshan, C., 12 Feb 2023.

    Research output: Contribution to conference › Poster › Research

  94. Published

    Investigating CO2 activation with perovskite oxides by combining NAP-XPS and impedance spectroscopy

    Melcher, C., Schrenk, F., Nenning, A., Ruh, T., Opitz, A. K. & Rameshan, C., 12 Feb 2023.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Transformationen in der Lehre - Virtual Reality Laboraufgabe in der Technischen Chemie

    Pirker, J., Rameshan, C., Stadlbauer, D., Sommer, S., Ruh, T., Schrenk, F., Lindenthal, L. & Holly, M., 12 Feb 2023.

    Research output: Contribution to conference › Poster › Research

  96. E-pub ahead of print

    Effects of the Electrodes’ Shape and Graphite Quality on the Arc Stability During Hydrogen Plasma Smelting Reduction of Iron Ores

    Ernst, D., Zarl, M. A., Farkas, M. A. & Schenk, J., 9 Feb 2023, (E-pub ahead of print) In: Steel research international. 94.2023, 7, 12 p., 2200818.

    Research output: Contribution to journal › Article › Research › peer-review

  97. E-pub ahead of print

    Inverse parameter determination for metal foils in multifunctional composites

    Trost, C. O. W., Krobath, M., Žák, S., Hammer, R., Krivec, T., Gänser, H.-P., Trost, T. W., Hohenwarter, A. & Cordill, M. J., 9 Feb 2023, (E-pub ahead of print) In: Materials and Design. 227.2023, March, 13 p., 111711.

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Study of Local Fatigue Methods (TCD, N-SIF, and ESED) on Notches and Defects Related to Numerical Efficiency

    Stoschka, M., Horvath, M., Fladischer, S. & Oberreiter, M., 9 Feb 2023, In: Applied Sciences (Switzerland). 13.2023, 4, 41 p., 2247.

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Hydrogen Absorption of Aluminum-Magnesium Melts from Humid Atmospheres

    Tichy, S., Pucher, P., Prillhofer, B., Wibner, S. & Antrekowitsch, H., 8 Feb 2023, Light Metals 2023. p. 920-927 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Parameter Optimization for Hydrogen-Induced Fluidized Bed Reduction of Magnetite Iron Ore Fines

    Zheng, H., Schenk, J., Daghagheleh, O. & Taferner, B., 8 Feb 2023, In: Metals. 13.2023, 2, 10 p., 339.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Active and passive tracing of non-metallic inclusions in steel using rare earth elements

    Walkner, C., Thiele, K., Michelic, S. K., Meisel, T. C., Ilie, S., Rössler, R. & Prohaska, T., 2 Feb 2023.

    Research output: Contribution to conference › Poster › Research

Previous 1...18 19 20 21 22 23 24 25 ...339 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402