Montanuniversität

Organisational unit: University

2001 - 2100 out of 33,892Page size: 100

Research output

  1. 2023
  2. Published

    P.03 Fostering inclusive access to analytical instrumentation

    Irrgeher, J., Schober, M., Lancaster, S., Trimmel, S., Wagner, S. & Prohaska, T., May 2023, p. 47. 1 p.

    Research output: Contribution to conference › Abstract

  3. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Vorstudie - Vergleich innovativer Identifikationsverfahren für Post-Consumer Leichtverpackungen - Endbericht

    Kuchta, K., Guo, J., Woidasky, J., Auer, M., Schmidt, J., Pomberger, R., Tischberger-Aldrian, A., Kuhn, N. E. & Anditsch, A., May 2023, Hamburg. 133 p.

    Research output: Book/Report › Commissioned report › Research

  6. Published

    X-ray Photoelectron spectroscopy (XPS) – A powerful surface characterization technique

    Bandl, C., May 2023, BOOK OF ABSTRACTS - Junganalytiker*innenforum 2023 / Young analytical scientist’s forum 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    RecoPhos: Ein Zero-Waste Recyclingansatz zur pyrometallurgischen Rückgewinnung von Phosphor aus Reststoffen insbesondere Klärschlammaschen - Poster

    Wiszniewski, L., Krammer, A., Gatschlhofer, C., Doschek-Held, K. & Raupenstrauch, H., 30 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  8. E-pub ahead of print

    Lower hardness than strength: The auxetic composite microstructure of limpet tooth

    Wurmshuber, M., Wilmers, J., Kim, J., Oh, S. H., Bargmann, S. & Kiener, D., 29 Apr 2023, (E-pub ahead of print) In: Acta biomaterialia. 166.2023, August, p. 447-453 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Characterisation of gas cell reactions for 70+ elements using N2O for ICP tandem mass spectrometry measurements

    Lancaster, S., Prohaska, T. & Irrgeher, J., 28 Apr 2023, In: Journal of analytical atomic spectrometry. 38.2023, 5, p. 1135-1145 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Sphalerite as a non-traditional critical metal source: Correlative microscopy (EPMA, EBSD, and APT) of cobalt-enriched sulfides from the sediment-hosted copper-cobalt Dolostone Ore Formation deposit, Namibia

    Bertrandsson Erlandsson, V., Gopon, P., Waldl, H., Misch, D., Ellmies, R. & Melcher, F., 28 Apr 2023, In: Frontiers of earth science. 11.2023, 13 p., 1171859.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    A Numerically Efficient Method to Assess the Elastic–Plastic Strain Energy Density of Notched and Imperfective Cast Steel Components

    Horvath, M., Oberreiter, M. & Stoschka, M., 27 Apr 2023, In: Applied mechanics : open access journal. 4.2023, 2, p. 528-566 39 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of pulse-current-based protocols on the lithium dendrite formation and evolution in all-solid-state batteries

    Reisecker, V., Flatscher, F., Porz, L., Fincher, C., Todt, J., Hanghofer, I., Hennige, V., Linares-Moreau, M., Falcaro, P., Ganschow, S., Wenner, S., Chiang, Y. M., Keckes, J., Fleig, J. & Rettenwander, D., 27 Apr 2023, In: Nature Communications. 14.2023, 12 p., 2432.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    In Situ Study of Peritectic Couple Growth Under Purely Diffusive Conditions

    Ludwig, A. & Mogeritsch, J. P., 26 Apr 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    FORWÄRTS 2.0 -- Trockene Granulation von Hochofenschlacke mit Wärmerückgewinnung

    Doschek-Held, K. & Raupenstrauch, H., 25 Apr 2023, IEA Wirbelschichttechnologie (FBC) TCP: Wirbelschichttechnik von Brennstoffen für eine saubere Energieerzeugung. Bmk (ed.). Wien, AT, p. 16-17 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  16. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Local gradients of microstructure and residual stresses in Si device sidewalls separated by laser dicing

    Ziegelwanger, T., Meindlhumer, M., Todt, J., Reisinger, M., Matoy, K. & Keckes, J., 24 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Characterization of the Anisotropic Behaviour of Inconel 718 Parts Manufactured by Wire Arc Additive Manufacturing

    Hartl, K., Wallis, C., Bielik, M., Curti, P. & Stockinger, M., 21 Apr 2023, Proceedings of the 10th International Symposium on Superalloy 718 and Derivatives. Springer International Publishing, p. 789-805 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Anwendung von Modellen des Maschinellen Lernens zur Klassifikation von in NIR Transflektion aufgenommenen Leichtverpackungsfolienspektren

    Koinig, G., 19 Apr 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. E-pub ahead of print

    Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves

    Grabmayer, T., Manhart, J. C., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 19 Apr 2023, (E-pub ahead of print) In: Journal of applied polymer science. 140.2023, 25, 12 p., e53973.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Cyclic Solid-Liquid Phase Transformations in the CaO – SiO 2 System—Experiments and Modelling

    Ogris, D., Kircher, V. & Gamsjäger, E., 19 Apr 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, June, p. 1555-1564 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Digitalisierung der Handsortierung durch künstliche Intelligenz, Machine Learning und Human Machine Interaction

    Aberger, J. & Sarc, R., 19 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    On correlations between local chemistry, distortions and kinetics in high entropy nitrides: An ab initio study

    Nayak, G. K., Kretschmer, A., Mayrhofer, P. H. & Holec, D., 19 Apr 2023, (E-pub ahead of print) In: Acta materialia. 255.2023, 15 August, 9 p., 118951.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

    Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Strengthening effect of NiAl and Ni3Ti precipitates in Co-free maraging steels

    Zeisl, S., Van Steenberge, N. & Schnitzer, R., 19 Apr 2023, In: Journal of materials science. 58.2023, April, p. 7149–7160 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    VORRICHTUNG ZUM LEITEN EINES VON EINEM ABWURFENDE ODER AUSTRAGSENDE EINER FÖRDEREINRICHTUNG ABFLIESSENDEN MATERIALSTROMS

    Prenner, M. (Inventor) & Dünnwald, W. (Inventor), 19 Apr 2023, IPC No. B65G 15/16, B65G 37/00, B65G 15/08, B65G 15/22, B65G 47/53, B65G 47/44, Patent No. EP 3 947 211 B8

    Research output: Patent

  28. Published

    Decomposition of γ-Fe in 0.4C-1.8Si-2.8Mn-0.5Al steel during a continuous cooling process: A comparative study using in-situ HT-LSCM, DSC and dilatometry

    Liu, M., Bernhard, M. C., Kawulokova, M., Walek, J., Kern, M., Zla, S., Presoly, P., Smetana, B., Tkadleckova, M., Xu, G., Kang, Y.-B. & Bernhard, C., 17 Apr 2023, In: Journal of Materials Research and Technology. 24.2023, May-June, p. 3534-3547 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Effect of Ca and P on the Size and Morphology of Eutectic Mg2Si in High-Purity Al-Mg-Si Alloys

    Zarif, M. Z., Spacil, I., Pabel, T., Schumacher, P. & LI, J., 17 Apr 2023, In: Metals : open access journal . 13.2023, 4, 16 p., 784.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Evaluation of the Influence Exerted by Increased Silicon Contents on the Leaching Behavior of NMC-Based Black Mass

    Gerold, E., Lerchbammer, R. & Antrekowitsch, H., 17 Apr 2023, In: Metals : open access journal . 13.2023, 4, 15 p., 785.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Glide and mixed climb dislocation velocity in γ-TiAl investigated by in-situ transmission electron microscopy

    Galy, B., Musi, M., Hantcherli, M., Molénat, G., Couret, A., Spörk-Erdely, P., Clemens, H. & Monchoux, J.-P., 15 Apr 2023, In: Scripta materialia. 228.2023, 15 April, 8 p., 115333.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of hot liquid flowing water on Zeolite Y stability

    Latschka, M., Wellscheid, B., Rameshan, R., Schöberl, T. R., Essmeister, J., Pacholik, G., Valentini, F., Balta, L., Limbeck, A., Rameshan, C., Kählig, H. & Föttinger, K., 15 Apr 2023, In: Microporous and Mesoporous Materials. 354.2023, 15 April, 11 p., 112557.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method

    Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Topography of high-speed steel substrates sputter cleaned by an Ar/Ti cathodic arc plasma

    Kampichler, J., Razumovskiy, V. I., Klünsner, T., Kholtobina, A., Brandstetter, F., Nahif, F. & Mitterer, C., 15 Apr 2023, In: Surface & coatings technology. 458.2023, 15 April, 10 p., 129344.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Energetic optimization

    Spijker, C. & Swaminathan, S., 14 Apr 2023.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Hardness, strength and abrasivity of rocks: Correlations and predictions

    Kaspar, M., Latal, C., Pittino, G. & Blümel, M., 14 Apr 2023, In: Geomechanics and tunnelling = Geomechanik und Tunnelbau. 16.2023, 2, p. 184-192 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Passive seismic monitoring in conventional tunnelling: An innovative approach for automatic process recognition using support vector machines

    Hartl, I., Sorger, M., Hartl, K., Ralph, B. & Schlögel, I., 14 Apr 2023, (E-pub ahead of print) In: Tunnelling and Underground Space Technology. 137.2023, July, 14 p., 105149.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    A Comprehensive Review of Fracture Characterization and Its Impact on Oil Production in Naturally Fractured Reservoirs

    Kharrat, R. & Ott, H., 13 Apr 2023, In: Energies : open-access journal of related scientific research, technology development and studies in policy and management. 16.2023, 8, 16 p., 3437.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Christian Doppler Laboratory for selective recovery of minor metals using innovative process concepts

    Steinlechner, S., 13 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  40. Published

    Citric Acid Leaching of Industrial BOF Slags

    Böhm, A., Hartig, G. & Schinnerl, G., 13 Apr 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 4, p. 148-155 8 p.

    Research output: Contribution to journal › Article › Research

  41. Published

    Direct ex-situ carbonation of minerals and secondary materials without the use of additives

    Schinnerl, F., 13 Apr 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Evaluation and Comparison of the Conventional and Renewable-based Polyolefin Production based on Greenhouse Gas Reduction

    Markowitsch, C. & Lehner, M., 13 Apr 2023.

    Research output: Contribution to conference › Paper

  43. Published

    INREC – NACHHALTIGE RÜCKGEWINNUNG VON KRITISCHEN METALLEN DURCH KOMBINIERTE AUFARBEITUNG KOMPLEXER RESTSTOFFE

    Steinlechner, S., 13 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  44. Published

    INREC – Stoffströme der metallurgischen Industrie – Zukünftiges Potential zur Versorgung mit kritischen Metallen

    Steinlechner, S., 13 Apr 2023.

    Research output: Contribution to conference › Presentation › Research

  45. Published

    Einfluss der Betriebsbedingungen auf die reverse Wasser Gas Shift Reaktion

    Markowitsch, C. & Lehner, M., 12 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  46. Published

    Thermische Behandlung von Reststoffkombinationen zur stofflichen Verwertung in der Eisen-und Stahlindustrie und/oder Zementindustrie - Poster

    Doschek-Held, K., Krammer, A., Steindl, F. R., Sattler, T. M. & Wohlmuth, D., 12 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Zementmahlung - Stand der Technik und Trends für die Zukunft

    Holzinger, T. & Flachberger, H., 12 Apr 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 4, p. 175-183 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Characterisation of Secondary Copper Smelting Slag With Transmission Electron Microscopy

    Kleeberg, C., Cattini, L., Kremmer, T. & Antrekowitsch, J., 11 Apr 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54B.2023, 3, p. 1593-1603 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Impact of nanoparticle exsolution on DRM: Improving catalytic activity by reductive pre-treatment of perovskite-type catalysts

    Schrenk, F., Lindenthal, L., Drexler, H., Urban, G., Rameshan, R., Summerer, H., Berger, T., Ruh, T., Opitz, A. K. & Rameshan, C., 11 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Impact of nanoparticle exsolution on dry reforming of methane

    Schrenk, F., Lindenthal, L., Drexler, H., Urban, G., Rameshan, R., Summerer, H., Berger, T., Ruh, T., Opitz, A. K. & Rameshan, C., 11 Apr 2023, Tagungsband 23. Klimatag: Ressourcen im Wandel.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    NOx postprocessing for the steady laminar flamelet mode

    Spijker, C., Swaminathan, S. & Raupenstrauch, H., 11 Apr 2023.

    Research output: Contribution to conference › Abstract

  52. Published

    NOx postprocessing for the steady laminar flamelet mode

    Spijker, C., Swaminathan, S. & Raupenstrauch, H., 11 Apr 2023.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Numerical investigation of carbon and nitrogen emissions by enriching natural gas with hydrogen on a low-NOx burner

    Swaminathan, S., Spijker, C. & Raupenstrauch, H., 11 Apr 2023.

    Research output: Contribution to conference › Abstract

  54. Published

    Numerical investigation of carbon and nitrogen emissions by enriching natural gas with hydrogen on a low-NOx burner

    Swaminathan, S., Spijker, C. & Raupenstrauch, H., 11 Apr 2023.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    The path to a climate-neutral future: methanol steam reforming using perovskite oxides: Implementation of an automated Evaluation for an Quantitative Analysis of Mass Spectrometer Data

    Berger, T., Schrenk, F., Drexler, H., Lindenthal, L. & Rameshan, C., 11 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  56. Published

    Thermodynamic modelling of ladle treatment in steelmaking: status and first steps of parametrization by process data

    You, D., Bernhard, C., Rössler, R., Mayer, P. & Kloesch, G., 11 Apr 2023.

    Research output: Contribution to conference › Presentation › Research

  57. Published

    Transforming CO2 and H2 into Renewable Chemicals and Fuels: Research Group of Christoph Rameshan

    Berger, T., Cotter, T., Drexler, H., Lindenthal, L., Rollenitz, J., Rameshan, R., Ruh, T., Schrenk, F. & Rameshan, C., 11 Apr 2023.

    Research output: Contribution to conference › Poster › Research

  58. Published

    Transforming CO2 and H2 into Renewable Chemicals and Fuels

    Berger, T., Cotter, T., Drexler, H., Lindenthal, L., Rameshan, R., Ruh, T., Rollenitz, J., Schrenk, F. & Rameshan, C., 11 Apr 2023, Tagungsband 23. Klimatag: Ressourcen im Wandel.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Untersuchung eines rSOC-Systems in Wechselwirkung mit industriellen Prozessen: Hochtemperatur-Brennstoffzellensystem

    Banasiak, D., 11 Apr 2023.

    Research output: Contribution to conference › Poster › Transfer

  60. E-pub ahead of print

    Blast vibration prediction

    Trabi, B. & Bleibinhaus, F., 10 Apr 2023, (E-pub ahead of print) In: Geophysical prospecting. 71.2023, 7, p. 1312-1324 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Surface Functionalization of (Pyrolytic) Carbon: An Overview

    Pustahija, L. & Kern, W., 10 Apr 2023, In: C – journal of carbon research. 9.2023, 2, 35 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  62. E-pub ahead of print

    Interstitial segregation has the potential to mitigate liquid metal embrittlement in iron

    Ahmadian, A., Scheiber, D., Zhou, X., Gault, B., Romaner, L., Kamachali, R. D., Ecker, W., Dehm, G. & Liebscher, C., 8 Apr 2023, (E-pub ahead of print) In: Advanced materials. 35.2023, 28, 11 p., 2211796.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Phase stability of TiAl-based BCC high entropy alloys

    Hatzenbichler, L., Zeisl, S., Clemens, H. & Holec, D., 7 Apr 2023, In: Intermetallics. 158.2023, July, 9 p., 107893.

    Research output: Contribution to journal › Article › Research › peer-review

  64. E-pub ahead of print

    Synthesis of crystalline silver niobate thin films opening pathways for future process development

    Kölbl, L., Mitterer, C. & Franz, R., 7 Apr 2023, (E-pub ahead of print) In: Vacuum. 213.2023, July, 6 p., 112077.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Microstructure formation and mechanical performance of micro-nanoscale ceramic reinforced aluminum matrix composites manufactured by laser powder bed fusion

    Xi, L., Feng, L., Gu, D., Prashanth, K. G., Kaban, I., Wang, R., Xiong, K., Sarac, B. & Eckert, J., 5 Apr 2023, In: Journal of alloys and compounds. 939.2023, 5 April, 12 p., 168803.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Determination of Material Data for one PA66-GF30 (Badamid A70 GF30 HH E) for injection moulding simulation

    Duretek, I., 4 Apr 2023, 19 p.

    Research output: Book/Report › Commissioned report › Research

  68. Published

    Entwicklung und Scale-Up eines innovativen pyrometallurgischen Recyclingkonzepts für die Rückgewinnung von Wertmetallen aus Lithium-Ionen Batterien

    Wiszniewski, L., Holzer, A., Hochsteiner, T. & Doschek-Held, K., 4 Apr 2023, p. 48-49. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  69. Published

    RecoPhos: Ein Zero-Waste Recyclingansatz zur pyrometallurgischen Rückgewinnung von Phosphor aus Reststoffen insbesondere Klärschlammaschen

    Wiszniewski, L., Doschek-Held, K. & Gatschlhofer, C., 4 Apr 2023, p. 70-71. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  70. Published

    Thermische Behandlung von Reststoffkombinationen zur stofflichen Verwertung in der Eisen- und Stahlindustrie und/oder Zementindustrie

    Doschek-Held, K., Steindl, F. R. & Sattler, T. M., 4 Apr 2023, p. 66-67. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  71. Published

    High-Throughput Micromechanical Testing Enabled by Optimized Direct Laser Writing

    Jelinek, A., Žák, S., Alfreider, M. & Kiener, D., 3 Apr 2023, In: Advanced engineering materials. 25.2023, 7, 10 p., 2200288.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Enhancement of hydrogen storage properties from amorphous Mg85Ni5Y10 alloy

    Zhou, H., Ding, Z., Chen, Y. A., Lan, Z., Guo, S., Spieckermann, F., Zadorozhnyy, V., Tan, J., Pan, F. & Eckert, J., 1 Apr 2023, In: Journal of non-crystalline solids. 605.2023, 1 April, 9 p., 122167.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    A breakage model for DEM based on a probabilistic particle replacement with voronoi fragments

    Denzel, M., Prenner, M. & Sifferlinger, N. A., Apr 2023, Proceedings of the 13th International Comminution Symposium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Application of machine learning to determine the shear stress and filtration loss properties of nano-based drilling fluid

    Cai Ning, Y., Ridha, S., Umer Ilyas, S., Krishna, S., Dzulkarnain, I. & Abdurraham, M., Apr 2023, In: Journal of Petroleum Exploration and Production Technology. 13.2023, April, p. 1031-1052 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Blast Vibration Prediction

    Trabi, B. & Bleibinhaus, F., Apr 2023.

    Research output: Contribution to conference › Abstract › peer-review

  76. Published

    Coaly and lacustrine hydrocarbon source rocks in Permo-Carboniferous graben deposits (Weiach well, Northern Switzerland)

    Ajuaba, S., Sachsenhofer, R. F., Meier, V., Groß, D., Schnyder, J., Omodeo-Salé, S., Moscariello, A. & Misch, D., Apr 2023, In: Marine and petroleum geology. 150.2023, April, 26 p., 106147.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Decomposition of CrN induced by laser-assisted atom probe tomography

    Waldl, H., Hans, M., Schiester, M., Primetzhofer, D., Burtscher, M., Schalk, N. & Tkadletz, M., Apr 2023, In: Ultramicroscopy. 246.2023, April, 8 p., 113673.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Der Zerkleinerer als Teil einer Smart Waste Factory - Experimentelle Weiterentwicklung der Zerkleinerertechnologie

    Lasch, T., Feyerer, C., Khodier, K. & Sarc, R., Apr 2023.

    Research output: Contribution to conference › Poster › Transfer

  80. Published

    Efficient preparation of microtip arrays for atom probe tomography using fs-laser processing

    Tkadletz, M., Waldl, H., Schiester, M., Lechner, A., Schusser, G., Krause, M. & Schalk, N., Apr 2023, In: Ultramicroscopy. 246.2023, April, 5 p., 113672.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Evaluation of Process Structures and Reactor Technologies of an integrated Power-to-Liquid Plant at a Cement Factory

    Markowitsch, C., Lehner, M. & Maly, M., Apr 2023, In: Journal of CO2 utilization. 70.2023, April, 14 p., 102449.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Exploring Aromatic S-Thioformates as Photoinitiators

    Rieger, P., Pueschmann, S., Haas, M., Schmallegger, M., Guedes de la Cruz, G. D. C. & Grießer, T., Apr 2023, In: Polymers. 15.2023, 7, 8 p., 1647.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Großtechnische experimentelle Forschung in der Abfallwirtschaft: "WASTE SCANNER" und Versuchsanlage "DIGITAL WASTE RESEARCH LAB"

    Kandlbauer, L., Pomberger, R. & Sarc, R., Apr 2023, Österreichische Abfallwirtschaftstagung 2023 Postersession: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Großtechnische experimentelle Forschung in der Abfallwirtschaft: "WASTE SCANNER" und Versuchsanlage "DIGITAL WASTE RESEARCH LAB"

    Kandlbauer, L., Pomberger, R. & Sarc, R., Apr 2023

    Research output: Other contribution › Research

  85. Published

    Herstellerunabhängige digitale Plattform im Kontext Smart Waste Factory

    Khodier, K. & Sarc, R., Apr 2023.

    Research output: Contribution to conference › Poster › Transfer

  86. Published

    Methodenentwicklung zur schnellen Klassifizierung von Multilayer-Folien in Kunststoffverpackungsabfällen mittels tragbarem NIR-Spektrometer

    Stipanovic, H. & Tischberger-Aldrian, A., Apr 2023.

    Research output: Contribution to conference › Poster › Research

  87. Published

    Revision of the edge channel picture for the integer quantum Hall effect

    Oswald, J., Apr 2023, In: Results in Physics. 47.2023, April, 8 p., 106381.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Seismic structure of the Cheb Basin from high resolution surveying – traveltime tomography results

    Banasiak, N. & Bleibinhaus, F., Apr 2023.

    Research output: Contribution to conference › Abstract › peer-review

  89. Published

    Stratigraphy of the Cenozoic succession in eastern Azerbaijan: Implications for petroleum systems and paleogeography in the Caspian basin

    Aghayeva, V., Sachsenhofer, R., van Baak, C. G. C., Bayramova, S., Ćorić, S., Frühwirth, M., Rzayeva, E. & Vincent, S. J., Apr 2023, In: Marine and petroleum geology. 150.2023, April, 25 p., 106148.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Strength determination for rough substrate-coating interfaces with three-dimensional defect structure

    Klünsner, T., Krobath, M., Konetschnik, R., Tritremmel, C., Maier-Kiener, V., Samardzic, D., Ecker, W., Czettl, C., Mitterer, C. & Kiener, D., Apr 2023, In: International journal of refractory metals & hard materials. 112.2023, April, 10 p., 106149.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Stretch-Steering of Aligned Discontinuous Fiber Tapes on Highly Curved Paths using Automated Fiber Placement

    Legenstein, A., Füssel, L., Tierney, J., Gillespie Jr., J. W., Heider, D. & Cender, T., Apr 2023, p. 992-1005. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  92. Published

    The novel paste electrolyte measuring cell for EIS testing of the commonly used surface protection on bronze

    Soljic, I., Soic, I., Eskinja, M., Mujezinovic, A. & Martinez, S., Apr 2023, In: Progress in organic coatings. 177, 16 p., 107442.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Graphite thermometry by interactive fitting of Raman spectra

    Rantitsch, G., 31 Mar 2023, In: International journal of coal geology. 271.2023, 15 April, 9 p., 104232.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  95. E-pub ahead of print

    Magnetite chemistry of the Sarkuh Porphyry Cu deposit, Urumieh–Dokhtar Magmatic Arc (UDMA), Iran: A record of deviation from the path sulfide mineralization in the porphyry copper systems

    Zarasvandi, A., Rezaei, M., Raith, J., Taheri, M., Asadi, S. & Heidari, M., 31 Mar 2023, (E-pub ahead of print) In: Journal of geochemical exploration. 249.2023, June, 107213.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    In-Situ Observation of Steel/Slag/Inclusion Interaction by Means of High-Temperature Confocal Scanning Laser Microscopy

    Cejka, J. & Michelic, S. K., 30 Mar 2023, In: Metals. 13.2023, 4, 11 p., 686.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Neues vom römischen Goldbergbau im Karth – Gold waschen nach Plinius dem Älteren

    Cech, B., Elmer, S., Fuchs, M., Melcher, F., Scholger, R., Stremke, F., Urban, H. & Weichselberger, G., 30 Mar 2023, In: Römisches Österreich : Jahresschrift der Österreichischen Gesellschaft für Archäologie. 2022, 45, p. 13-28 16 p.

    Research output: Contribution to journal › Article › Research

  98. Published

    The B3B Strength test

    Staudacher, M., Lube, T. & Supancic, P. H., 30 Mar 2023.

    Research output: Contribution to conference › Poster › Research

  99. Published

    Multiscale Wear Simulation in Textured, Lubricated Contacts

    Maier, M., Pusterhofer, M. & Grün, F., 29 Mar 2023, In: Coatings. 13.2023, 4, 15 p., 697.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Optimierung einer Siebanlage mittels Mehrkörpersimulation – Status quo und Ausblick

    Falkner, P., Fimbinger, E. & Flachberger, H., 29 Mar 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 4, p. 163-174 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Preparation of Micro-Electrolytic Iron-Carbon Filler for Sewage by Recycling Metallurgical Dust

    Xu, R., Zhang, Y., Huang, X., Cao, M., Yu, J., Zhang, J., Zheng, H. & Schenk, J., 29 Mar 2023, In: Metals. 13.2023, 4, 16 p., 673.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...17 18 19 20 21 22 23 24 ...339 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402