Departments and Chairs

Organisational unit: Departments and Institutes

1 - 50 out of 33,499Page size: 50

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Markus, K., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Seltene Erden: Eigentlich kein Problem

    Melcher, F., 11 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  4. Published

    Das Anthropozän – Frank Melcher zum ‘Erdzeitalter des Menschen’

    Melcher, F., 10 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  5. Published

    CaCTUS – Carbon Capture & Transformation, Utilization and Storage: CCUS in Österreich – Potenziale, Technologien, Folgenabschätzung und Einordnung der rechtlichen Rahmenbedingungen

    Wolf-Zöllner, P., Böhm, H., Veseli , A., Hochmeister, S., Kulich, J., Fazeni-Fraisl , K., Lehner, M., Kienberger, T., Ott, H., Fleischhacker, J., Sachs, N. & Kapfer, M., 7 Mar 2025, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  6. Published

    Wasserstoff als nachhaltiger Energieträger – Dimensionieren im Maschinenbau

    Grun, F., Oberreiter, P. & Renhart, P., 4 Mar 2025, 20. Kraftfahrzeug – Symposium - Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    The Discrete Element Method: Advanced Topics - Unit 6: Flexible Particles and Structures

    Fimbinger, E., 3 Mar 2025

    Research output: Non-textual form › Digital or Visual Products › Transfer

  8. Published

    Unlocking the Value of Electronic Waste: Inter-laboratory Insights into Critical Element Analysis

    Lancaster, S. T., Sahlin, E., Oelze, M., Ostermann, M., Vogl, J., Laperche, V., Touze, S., Ghestem, J. P., Dalencourt, C., Gendre, R., Stammeier, J., Klein, O., Pröfrock, D., Košarac, G., Jotanovic, A., Bergamaschi, L., Di Luzio, M., D'Agostino, G., Jaćimović, R. & Eberhard, M. & 9 others, Feiner, L., Trimmel, S., Rachetti, A., Sara-Aho, T., Roethke, A., Michaliszyn, L., Pramann, A., Rienitz, O. & Irrgeher, J., 3 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Damping of vibrations of a rod by dissipation due to diffusion

    Svoboda, J., Hackl, K. & Fischer, F.-D., 1 Mar 2025, In: Scripta Materialia. 257.2025, 1 March, 5 p., 116461.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    A Hybrid Update of the Fe-Si System by DSC, Thermodynamic Modeling and Statistical Learning from Ladle Refining Data of Electrical Steels

    Bernhard, M. C., Kavic, D., Presoly, P., Wi, T.-G., Park, W.-B., Rössler, R., Jungreithmeier, A., Ilie, S., Bernhard, C. & Kang, Y.-B., 26 Feb 2025, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 56

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Assessment of measures to reduce corporate carbon emissions along the production and energy processes

    Feichtinger, G., Mark, D. & Posch, W., 26 Feb 2025, Organisation und Dynamik von Energiemärkten und Investitionen in Infrastrukturen: Balance zwischen langfristigen Klimazielen und aktuellen Realitäten. p. 1 19 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  13. Published

    Resolving the fundamentals of the J-integral concept by multi-method in situ nanoscale stress-strain mapping

    Meindlhumer, M., Alfreider, M., Sheshi, N., Hohenwarter, A., Todt, J., Rosenthal, M., Burghammer, M., Salvati, E., Keckes, J. & Kiener, D., 22 Feb 2025, In: Communications materials. 2025, 6, 15 p., 35.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Exploring Local Attitudes Towards Sustainable Tourism Development and Community Resilience in Skadar Lake and Durmitor National Parks, Montenegro: A Socio-Demographic Analysis

    Manojlović, B., Cvetković, V. M., Renner, R., Grozdanić, G. & Perosevic, N., 21 Feb 2025

    Research output: Other contribution › Research

  15. Published

    Influence of carbon and sulfur on austenite grain boundary mobility

    Kern, M., Bernhard, M. C., Scheiber, D., Suhane, A., Militzer, M. & Bernhard, C., 21 Feb 2025, In: Acta materialia. 288

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Hydrodynamic performance testing of artificial textures using a novel pin-on-disc test method

    Pusterhofer, M., Maier, M., Scharf, R., Haumer, F. & Grün, F., 17 Feb 2025, In: Frontiers in Mechanical Engineering. 11.2025, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Obituary Dr. Klaus Peter Jochum

    Meisel, T. C., Jacob, D., Weis, U., Mertz‐Kraus, R., Enzweiler, J., Borisova, A. & Williams, E. A., 17 Feb 2025, In: Geostandards and Geoanalytical Research. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Combined X-ray microdiffraction and micromechanical testing for direct measurement of thin film elastic constants

    Janknecht, R., Hahn, R., Koutná, N., Todt, J., Meindlhumer, M., Davidok, A., Riedl, H., Keckes, J. & Mayrhofer, P. H., 15 Feb 2025, In: Materials and Design. 252.2025, April, 11 p., 113720.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 2025, ??? Stand: 17. Februar 2025, 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Characterization of High-Speed Steels—Experimental Data and Their Evaluation Supported by Machine Learning Algorithms

    Wießner, M. & Gamsjäger, E., 12 Feb 2025, In: Metals : open access journal . 15.2025, 2, 28 p., 194.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Impact of tensile specimen properties on hydrogen embrittlement testing using hollow specimens

    Oberreiter, P., Winter, G., Grun, F. & Drexler, A., 12 Feb 2025.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Lessons from assessing sustainability in the mining and resources sector

    Tost, M., 12 Feb 2025, The Routledge Handbook of Global Sustainability Education and Thinking for the 21st Century.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  26. Published

    Application of high-temperature confocal scanning laser microscopy to investigate non-metallic inclusions in steel: a review

    Preißer, N., Wang, Y., Cejka, J., Gruber, I., Mu, W. & Michelic, S. K., 11 Feb 2025, In: Journal of iron and steel research international. ??? Stand: 28. Februar 2025, ??? Stand: 28. Februar 2025, 9 p., 111030.

    Research output: Contribution to journal › Review article › peer-review

  27. Published

    Crack sensitivity of high-manganese cryogenic steels in initial solidification during continuous casting

    Li, Y., Winkler, J., Presoly, P., Bernhard, C., Qin, X.-F. & Cheng, C.-G., 10 Feb 2025, In: Journal of iron and steel research international. ??? Stand: 28. Februar, ??? Stand: 28. Februar, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Formation of uranium-, vanadium- and chromium-bearing reduction spheroids in karst bauxite of the Unterlaussa mining district (Austria)

    Hampl, F., Dunkl, I., Schmidt, B. C., Bertrandsson Erlandsson, V. & Melcher, F., 10 Feb 2025, (E-pub ahead of print) In: Journal of geochemical exploration. 272.2025, May, 17 p., 107709.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

    Oberreiter, P., Schönowitz, M., Maier, B. & Grün, F., 9 Feb 2025, In: Fatigue and Fracture of Engineering Materials and Structures. ??? Stand: 27. Februar 2025, ??? Stand: 27. Februar 2025, 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    EU supply chain due diligence (CSDDD): insights from a survey of companies in Austria

    Feichtinger, G. & Posch, W., 3 Feb 2025

    Research output: Non-textual form › Digital or Visual Products › Research

  31. Published

    Advancing the next generation of high-performance metal matrix composites through metal particle reinforcement

    Alem, S. A. A., Sabzvand, M. H., Govahi, P., Poormehrabi, P., Hasanzadeh Azar, M., Salehi Siouki, S., Rashidi, R., Angizi, S. & Bagherifard, S., Feb 2025, In: Advanced Composites and Hybrid Materials. 8, 1, 3.

    Research output: Contribution to journal › Review article › peer-review

  32. Published

    Towards high-strength electrolyte-supported solid oxide fuel cells

    Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Understanding the lower fracture resistance of cold sintered ceramics

    Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    20 kHz X-ray diffraction on Cu thin films explores thermomechanical fatigue at high strain-rates

    Ziegelwanger, T., Reisinger, M., Vedad, B., Hlushko, K., Van Petegem, S., Todt, J., Meindlhumer, M. & Keckes, J., 31 Jan 2025, In: Materials and Design. 251.2025, March, 9 p., 113664.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Sensitivity analysis of the methanation process in underground hydrogen storage: A case study in Upper Austria

    Abdellatif, M., Azizmohammadi, S., Stiedl, G., Pichler, M. & Ott, H., 31 Jan 2025, In: International Journal of Hydrogen Energy. 105.2025, 4 March, p. 1164-1177 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Research Projects towards an Innovative, Digitalised, and Responsible Extractive Industry: Examples from the Chair of Mining Engineering and Mineral Economics

    Fernandez Munoz, P., Sánchez, F., Mavroudi, M., Ungerer, K., Hartlieb, P. & Tost, M., 29 Jan 2025, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research

  37. Published

    Teleoperation von mobilen Bergbaumaschinen

    Sifferlinger, N. A., 29 Jan 2025, In: Berg- und hüttenmännische Monatshefte : BHM. 170.2025, 2, p. 88-91 4 p.

    Research output: Contribution to journal › Article › Research

  38. Published

    Prototype of AI-powered assistance system for digitalisation of manual waste sorting

    Aberger, J., Shami, S., Häcker, B., Pestana, J., Khodier, K. & Sarc, R., 25 Jan 2025, In: Waste management. 194.2025, 15 February, p. 366-378 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Application of coupled CFD-DEM modelling in erosion study of cohesive materials: A case study of rotating finger test

    Rahimilarki, M., Burhanuddin, B., Vollmann, S., Jin, S. & Harmuth, H., 23 Jan 2025, In: Results in Engineering. 25.2025, March, 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Harvesting superior intrinsic plasticity in nitride ceramics with negative stacking fault energy

    Huang, Y., Chen, Z., Meindlhumer, M., Hahn, R., Holec, D., Leiner, T., Maier-Kiener, V., Zheng, Y., Zhang, Z., Hatzenbichler, L., Riedl, H., Mitterer, C. & Zhang, Z., 23 Jan 2025, In: Acta Materialia. 286.2025, 1 March, 15 p., 120774.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Thermally induced fracture modeling during a long-term water injection

    Liu, Y., Yoshioka, K., You, T., Li, H. & Zhang, F., 23 Jan 2025, In: International Journal of Rock Mechanics and Mining Sciences. 186.2025, February, 13 p., 106022.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Tracing non-metallic inclusions in steel with low levels of enriched magnesium stable isotopes: A novel approach

    Thiele, K., Wagner, S., Irrgeher, J., Prohaska, T. & Michelic, S. K., 22 Jan 2025, In: Materials characterization. 221.2025, March, 14 p., 114759.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Pelsonian and Illyrian (Anisian, Middle Triassic) ammonoid faunas from the Bulog Group of Kovčezi, Durmitor Mountain, Dinarides (northern Montenegro)

    Đaković, M., Mrdak, M. & Gawlick, H.-J., 21 Jan 2025, In: Austrian journal of earth sciences. 118.2025, 1, p. 1-40 40 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Evaluation of European Critical Raw Material Assessments under Energy Transition Considerations: Applications and Prospects

    Feichtinger, G. & Posch, W., 20 Jan 2025, In: Circular economy and sustainability. 75 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Effects of laser wavelength and pulse energy on the evaporation behavior of TiN coatings in atom probe tomography: A multi-instrument study

    Schiester, M., Waldl, H., Rice, K. P., Hans, M., Primetzhofer, D., Schalk, N. & Tkadletz, M., 17 Jan 2025, In: Ultramicroscopy. 270.2025, April, 10 p., 114105.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Sensor element and contact force sensor device

    Kammerhofer, T. (Inventor) & Thurner, T. (Inventor), 16 Jan 2025, IPC No. G01L5/16, G01L5/22, G01L19/00, B25J13/08, Patent No. 18763502

    Research output: Patent

  49. Published

    GIS-Based Assessment of Flash Flood Potential in North Macedonia: Insights from Advanced Geospatial Analytics

    Bojana , A., Milevski, I., Cvetković, V. & Nikolic, N., 15 Jan 2025, In: Preprints : the multidisciplinary preprint platform. p. 1-24 24 p.

    Research output: Contribution to journal › Article › Research

  50. Published

    Ab-initio grain boundary thermodynamics beyond the dilute limit

    Spitaler, T., Scheiber, D., Dösinger, C. A., Hodapp, M. & Romaner, L., 14 Jan 2025, In: Acta materialia. 286.2025, 1 March, 13 p., 120725.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Herausforderungen der EU-Lieferkettensorgfaltspflichten

    Feichtinger, G. & Posch, W., 14 Jan 2025

    Research output: Non-textual form › Digital or Visual Products › Research

Previous 1 2 3 4 5 6 7 8 ...670 Next
View graph of relations