Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

3701 - 3800 out of 4,192Page size: 100

Research output

  1. 2007
  2. Published

    Selective immobilization of gold nanoparticles on the surface of a photoreactive polymer

    Kern, W., Weinberger, M. & Rentenberger, S., 2007, In: Monatshefte für Chemie = Chemical monthly. 138, p. 309-314

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Self assembled monolayers on gold: A study of 11-mercaptoundecanoic acid (11-MUA) on gold

    Stettner, J., Frank, P., Winkler, A., Grießer, T., Track, A., Trimmel, G. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Simulation der Spritzgießprozesses von Mikrobauteilen

    Cramer, A., Michaeli, W., Friesenbichler, W. & Duretek, I., 2007, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. 3, p. 1-26

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Simulation des Aufheizvorgangs beim Thermoformen

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 62-65

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Simulation fo the heating step within the thermoforming process using the finite difference method

    Fertschej, A. & Langecker, G., 2007, PPS-23 Program and Book of Abstracts. p. 113-113

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Simulation of the Heating Cycle during Thermoforming

    Fertschej, A., Langecker, G. & Kertz, J., 2007, In: Kunststoffe. 97, p. 37-39

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Size-Controlled Synthesis of ZnS-Nanoparticles in an Organic Solvent and their Application in Photovoltaic Devices

    Rath, T., Maier, E., Grießer, T., Saf, R., Meissner, D., Trimmel, G. & Stelzer, F., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Slow crack growth in PE-HD under static and cyclic loads

    Pinter, G. G., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  10. Published

    Small strain test system for optical strain measurement systems

    Steinberger, R., Jerabek, M., Major, Z. & Lang, R., 2007, Experimental Analysis of Nano and Engineering Materials and Structures. p. 393-394

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Solarthermische Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Hausner, R., Wallner, G. & Resch, K., 2007, 17. Symposium Thermische Solarenergie. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Solarthermische Kunststoffkollektoren mit integriertem Überhitzungsschutz

    Hausner, R., Wallner, G. & Resch, K., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Structural Basis for Intumescence-Part II: Synthesis and Characterization of Intumescent Polymers Containing Spirophosphorus Moiety in the Backbone

    Fink, J., 2007, In: Polymer plastics technology and engineering (Polymer-plastics technology and engineering). p. 919-925

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Surface modification of polyethylene by photosulfonation

    Temmel, S. & Kern, W., 2007, Polymer Surface Modification: Relevance to Adhesion. Vol. 4. p. 154-167

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Systematic investigations of fatigue crack growth behavior of a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2007, In: Journal of Applied Polymer Science. p. 1745-1758

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Temperierte Zugversuche zur Bestimmung mechanischer Kennwerte und des Erscheinungsbildes von Lackfilmen und bandbeschichteten Blechen

    Wohlscheiber, F., 2007

    Research output: Thesis › Diploma Thesis

  17. Published

    Tensile tests for liner resin HPM053 with and without pigment

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Tensile tests for UP-Resin distitron 412 V2 with various filler types (dry and wet)

    Pilz, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Testing of rail parts according ST 120/20a - AREA in case of heavy load application

    Major, Z. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    The influence of fiber-orientation and stress ratio on the fatigue behavior of short-glasfiber-reinforced polymers

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R. W., 2007, Society of Plastics Engineers Annual Technical Conference: Plastics Encounter at ANTEC 2007, Conference Proceedings. p. 284-288 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Thermotropic Resin Systems: Relationships Between Formulation Parameters, Material Structure and Optical Properties

    Resch, K. & Wallner, G., 2007, Solar Energy and Human Settlement. p. 541-545

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Thin Layers of Photosensitive Silane Molecules for Photochemical Patterning

    Lex, A., Pacher, P., Schennach, R., Shen, Q., Hlawacek, G., Track, A. M., Koller, G., Ramsey, M. G., Teichert, C., Werzer, O., Resel, R., Zojer, E., Kern, W. & Trimmel, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Thin Layers of Photosensitive Silane Molecules for Photochemical Patterning

    Lex, A., Pacher, P., Schennach, R., Shen, Q., Hlawacek, G., Track, A. M., Koller, G., Ramsey, M. G., Teichert, C., Werzer, O., Resel, R., Zojer, E., Kern, W. & Trimmel, G., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Topografiemessung einer ungetemperten und einer getemperten mit Kunststoff beschichteten Aluminiumfolie

    Berger, G. R. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Untersuchungen zu Schwindung und Verzug von Schachtelformteilen mit verschiedenen Wanddickenkombinationen

    Zaucher, P., 2007

    Research output: Thesis › Diploma Thesis

  26. Published

    UV assisted surface modification of polybutadiene with phosphorus containing groups

    Buchgraber, C., Svagera, R., Ebel, M. F., Schröttner, H. & Kern, W., 2007, In: Macromolecular chemistry and physics. 208, p. 1159-1167

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    UV-reactive Monolayers of Aryl Esters on Oxidic Surfaces: Patterning and Chemical Surface Modification via Photo-Fries Rearrangment.

    Höfler, T., Basnar, B., Cirac, J., Grießer, T., Hlawacek, G., Hoffmann, H., Shen, Q., Kovac, J., Ramsey, M., Satka, A., Teichert, C., Temmel, S., Track, A., Trimmel, G., Zojer, E. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    UV reactive polymers for refractive index modulation based on the photo-Fries rearrangement

    Höfler, T., Grießer, T., Gstrein, X., Trimmel, G., Jakopic, G. & Kern, W., 2007, In: Polymer. 48, p. 1930-1939

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    UV reactive polymers with tunable refractive index

    Daschiel, U., Hoefler, T., Jakopic, G. & Kern, W., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Verfahren zur Ermittlung von Materialkennwerten polymerer Schäume für die Crashsimulation

    Reiter, M. G., 2007, 110 p.

    Research output: Thesis › Diploma Thesis

  31. Published

    Verfahren zur verbesserten Charakterisierung von porösen Materialien in der Fahrzeugakustik

    Ickinger, S., 2007, 70 p.

    Research output: Thesis › Diploma Thesis

  32. Published

    Volume strain measurements of particle-filled polypropylene compounds

    Jerabek, M. & Major, Z., 2007, Eurofillers. p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Zugprüfungen an glasfaserverstärkten Composites

    Pinter, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Zug- und Druckeigenschaften des Laminatwerkstoffes L06 (Matrix: Epolack) für unterschiedliche Aushärtungsgrade

    Pilz, G., Karpf, R. & Thiel, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. 2006
  36. Published

    Characterisation of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain-diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R. W., Oct 2006, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1277-1283 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Verfahren zur Modifizierung von Kunststoff-Oberflächen

    Kern, W. (Inventor) & Buchgraber, C. (Inventor), 20 Sept 2006

    Research output: Patent

  38. Published

    Photoreaktive Oberflächenbeschichtungen

    Kern, W. (Inventor), Trimmel, G. (Inventor), Lex, A. (Inventor) & Stelzer, F. (Inventor), 9 May 2006

    Research output: Patent

  39. Published

    19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung

    Friesenbichler, W. (Editor) & Laske, S. (Editor), 2006, Eigenverlag.

    Research output: Book/Report › Book › Research

  40. Published

    Abrasive/corresive Wear on Plastic Mould Steels, measured under practical conditions

    Friesenbichler, W., Langecker, G. & Caliskanoglu, D., 2006, Tooling Materials and their applications from research to market. p. 267-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Accelerated ageing experiments with crosslinked and conventional ultra-high molecular weight polyethylene (UHMW-PE) stabilised with alpha-tocopherol for total joint arthroplasty

    Lederer, K., 2006, In: Journal of materials science / Materials in medicine. 17, p. 1333-1340

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Accelerated quality assurance tests for PE pipe grades

    Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2480-2484

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    A Column By-Pass System and Its Application in High-Temperature Size-Exclusion Chromatography

    Aust, N., O'Donohue, S., Yakhoul, A. J. & Zash, N., 2006, In: Macromolecular materials and engineering. 291, p. 387-387

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A Desgin Support System for Plastic Injection Molds: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., Lucyshyn, T. & Fischer, K., 2006

    Research output: Non-textual form › Web publication/site › Research

  45. Published

    A Design Support System for Plastic Injection Molds

    Fischer, K., Lucyshyn, T. & Langecker, G., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 216-216

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Advanced Finite Element Analysis for High Power Wind Energy Systems

    Wörndle, R. & Karall, T., 2006, 2006 8th International Conference on Actual Problems of Electronic Instrument Engineering Proceedings Vol. 1 (APEIE-2006 in 7 volumes ; Novosibirsk, September 26 - 28, 2006). State Technical University, p. 234-239

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an funktionalen Polyolefinen – Teil3 (Diss Oreski)"

    Wallner, G., Oreski, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Aging and aging mechanism of functional polymers for optical applications - WP Report "Untersuchungen an Solarabsorbermaterialien (Diss Kahlen)"

    Wallner, G., Kahlen, S. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Aging behavior of polymeric materials for solar-thermal applications – Effect on ultimate mechanical properties

    Kahlen, S., Wallner, G., Meir, M. G. & Rekstad, J., 2006, EuroSun 2006. ISES, p. 7-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Alternative Polyethylentypen für Gleitflächen von Endoprothesen

    Weitlaner, A. B., 2006, 61 p.

    Research output: Thesis › Diploma Thesis

  51. Published

    Analytische und technologische Charakterisierung von polymeren Solarabsorbermaterialien

    Fischer, J., 2006, 131 p.

    Research output: Thesis › Diploma Thesis

  52. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Animal experiments with ultra-high molecular weight polyethylene (UHMW-PE) stabilised with alpha-tocopherol used for articulating surfaces in joint endoprostheses

    Lederer, K., 2006, In: Journal of materials science / Materials in medicine. 17, p. 1341-1347

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A novel qualification concept for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Lang, R., Pinter, G., Balika, W. & Haager, M. J., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Antimicrobial surfaces based upon functional norbornene polymers

    Gstrein, X., Kern, W., Seyfriedsberger, G., Stelzer, F. & Rametsteiner, K., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Antimicrobial surfaces based upon functional polynorbornenes

    Kern, W., Seyfriedsberger, G., Gstrein, X., Rametsteiner, K. & Stelzer, F., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Application demonstration and performance of a cellulose triacetate polymer film based transparent insulation wall heating system

    Wallner, G., Hausner, R., Hegedys, H., Schobermayr, H. & Lang, R., 2006, In: Solar energy. 80, p. 1410-1416

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Bestimmung der Schadenstoleranz und der Ermüdungseigenschaften von kohlefaserverstärkten Epoxid-Laminaten

    Felber, S., 2006, 107 p.

    Research output: Thesis › Diploma Thesis

  59. Published

    Bestimmung der Schlüsseleigenschaften spezieller Matrixharze für Verbundwerkstoffanwendungen

    Pilz, G. & Wolfahrt, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Bestimmung der thermischen Ausdehnung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Bestimmung von Werkstoffkennwerten zur FE-Simulation

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Biozide Polymere

    Kern, W. (Inventor), Stelzer, F. (Inventor), Seyfriedsberger, G. (Inventor), Gstrein, X. (Inventor) & Rametsteiner, K. (Inventor), 2006, Patent No. PCT/EP2006/067452

    Research output: Patent

  63. Published

    Blind Rivet Pull Out Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Bruchmechanische Methoden zur beschleunigten Charakterisierung des langsamen Risswachstums von Polyethylen-Rohrwerkstoffen

    Haager, M. J., 2006, 244 p.

    Research output: Thesis › Doctoral Thesis

  65. Published

    Characterisation of the Fatigue Behavior of Elastomer Composites

    Major, Z., Kovacevic, Z., Kosir, M., Mesec, A. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 391-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Characterisation of the fatigue behavior of elastomers and elastomer Composite

    Major, Z., Feichter, C., Kovacevic, Z. & Lang, R., 2006, 1. Leobner Betriebsfestigkeitstage 2006. Montanuniversität Leoben, Lehrstuhl für Allgemeinen Maschinenbau, p. 265-277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Characterization of Rapid Gas Decompression Behavior of Pressurized Elastomer Seals

    Lederer, K., 2006, 113 p.

    Research output: Thesis › Diploma Thesis

  68. Published

    Characterization of the deformation and rupture behaviour of silicone elastomers for airbag applications

    Schwarz, A. J., 2006

    Research output: Thesis › Diploma Thesis

  69. Published

    Characterization of the Fatigue Behavior of Elastomer Compounds by Fracture Mechanics Methods

    Feichter, C., 2006

    Research output: Thesis › Doctoral Thesis

  70. Published

    Characterization of the Mechanical Behavior of Polyetheretherketone (PEEK)

    Major, Z. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Characterization of the tensile fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Pinter, G., Ladstätter, E., Billinger, W. & Lang, R., 2006, In: International Journal of Fatigue. p. 1277-1283

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Charakterisierung des Oberflächenerscheinungsbildes organisch bandbeschichteter Stahlbleche für Automobilanwendungen

    Gruber, D., Wallner, G., Buder-Stroisznigg, M., Strauß, B., Jandel, L. & Lang, R., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 205-208

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Charakterisierung von Epoxidharzwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Charakterisierung von hochglanzpolierten Werkzeugoberflächen und den damit abgeformten Kunststoffformteilen

    Reitter, M., 2006, 142 p.

    Research output: Thesis › Diploma Thesis

  75. Published

    Comparison between time-independent FE-Simulation and measurements for two types of rubber

    Feichter, C., Major, Z. & Lang, R., 2006, 5th International Conference on Mechanics and Materials in Design. INEGI-Instituto de Engenharia Mecânica e Gestão Industrial, p. 523-524

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Compression / Inplane Shear Tests

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Control of the resin transfer moulding process using dielectric and thermal analysis

    Wolfahrt, M., Pilz, G., Lang, R. & Ladstätter, E., 2006, Latest advancements of applied composite technology: SAMPE Europe 27th international conference, March 27th - 29th, 2006, Paris EXPO, Porte de Versailles ; proceedings. p. 309-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Cross-linking of natural rubber latex by UV techniques

    Temel, A., Kniendl, M., Schaller, R., Holzner, A. & Kern, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    CuInS2 Nanocomposite Solar Cells

    Grießer, T., 2006, Proceedings of the 21st European Photovoltaic Solar Energy Conference and Exhibition. p. 194-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    CuInS2 Nanocomposite Solar Cells

    Piber, M. S., Rath, T., Grießer, T., Trimmel, G., Stelzer, F. & Meissner, D., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Deformation analysis of notched rubber specimens

    Feichter, C., Major, Z. & Lang, R., 2006, In: Strain. p. 299-304

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Deformation behavior and appearance after forming of polymer coatings applied in multilayer coil-coated steel sheets - WP Report "Herstellung von beschichteten Blechen"

    Buder-Stroisznigg, M. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  83. Published

    Deformation behavior and appearance after forming of polymer coatings applied in multilayer coil-coated steel sheets - WP Report "Herstellung von Lackfilmen"

    Buder-Stroisznigg, M. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Deformation behavior and appearance after forming of polymer coatings applied in multilayer coil-coated steel sheets - WP Report "Mechanische und thermomechanische Charakterisierung von Lackfilmen"

    Buder-Stroisznigg, M. & Wallner, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  85. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts.

    Langecker, G., Friesenbichler, W., Berger, G. R. & Gruber, D., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 218-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Detection of Surface Structure and Appearance of Injection Molded Parts. 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings

    Langecker, G., 2006

    Research output: Non-textual form › Web publication/site › Research

  87. Published

    Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression

    Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, Development of a test and fatigue analysis methodology for elastomeric seals exposed to explosive decompression. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Druckentwicklung in der Feststoffförderzone

    Schuschnigg, S. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    DSC-Analyse eines vernetzten Gießharzes

    Wallner, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    DSC-Untersuchungen an PE-HD Bauteilen

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Dynamische-mechanische Analyse (DMA) von Thermoplasten

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  92. Published

    Dynamisch-mechanische Untersuchungen und Kriechversuche an Elastomerwerkstoffen

    Pilz, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Effect of artificial defects on the fatigue behavior of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R. W., 2006, p. 133-137. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  94. Published

    Effect of artificial defects on the fatigue behaviour of RTM laminates

    Pinter, G., Ladstätter, E. & Lang, R., 2006, ANTEC 2006. p. 133-137

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Effect of frequency, R-ratio and test specimen configuration on fatigue crack growth in PE pipe materials

    Stadler, H., 2006

    Research output: Thesis › Diploma Thesis

  96. Published

    Ermüdungsverhalten von PA 66 und PBT unter Medien- und Temperatureinfluss

    Riesner, M., 2006

    Research output: Thesis › Diploma Thesis

  97. Published

    Ermüdungsversuche an Laminaten

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    EXINMOLD: Ein Expertensystem für die Entwicklung von Spritzgießwerkzeugen

    Fischer, K., Langecker, G., Lucyshyn, T. & Hirner, M., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Fatigue crack growth and process zone development in a PE-HD pipe grade in through-thickness direction

    Balika, W., Pinter, G. & Lang, R., 2006, In: Advanced engineering materials. p. 1146-1150

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Flatwise Tension Test an Aluminiumkernverbunden

    Pinter, G. & Lang, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Forschung für die Praxis am Institut für Kunststoffverarbeitung - Ausewählte Beispiele aus den Arbeiten der letzten 17 Jahre

    Friesenbichler, W., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Grundlegende prozesstechnische Untersuchungen zur Optimierung des RFI-Prozesses für den industriellen Einsatz

    Weinberger, T., 2006, 103 p.

    Research output: Thesis › Diploma Thesis

Previous 1...34 35 36 37 38 39 40 41 42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301