Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

2901 - 3000 out of 4,192Page size: 100

Research output

  1. 2011
  2. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Influence of the heat transfer coefficient on the injection molding simulation of microstructures

    Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Conference Proceedings - ICIT & MPT 2011 . p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei -20 °C

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei Raumtemperatur

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Investigation of the chemical resistance and the material aging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Paper › peer-review

  7. Published

    Investigation of the chemical resistance and the material anging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011, SPE-EUROTEC 2011. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Investigation of the influence of stearic acid on rubber-brass adhesion

    Ziegler, E., Macher, J., Gruber, D. P., Pölt, P., Kern, W., Lummerstorfer, T., Feldgitscher, C., Holzner, A. & Trimmel, G., 2011, In: Rubber chemistry and technology. 85, 2, p. 264 - 276

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Investigations of adhesion on two-shot moulded parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Kerbschlaguntersuchungen an ABS-Compounds

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Kerbschlaguntersuchungen an Erdölcutingproben

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Kunststoffverarbeitung-Vom Rohstoff zum fertigen Bauteil

    Piontek, M., Holzer, C. & Laske, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Leichtbaupotentiale in der E-Mobility: Kunststofftechnische Herausforderungen beim Batteriegehäuse

    Kienzl, W., Berger, G. & Friesenbichler, W., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 131-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Manufacture of accelerator-free medical gloves via UV techniques

    Schlögl, S., Temel, A., Schaller, R., Holzner, A. & Kern, W., 2011, Proceedings of the 27th World Congress of the Polymer Processing Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Measurement of the visual perceptibility of sink marks in injection molded parts

    Haba, D., 2011, 79 p.

    Research output: Thesis › Master's Thesis

  18. Published

    Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould

    Friesenbichler, W., Duretek, I., Rajganesh Jegadeesan, X. & Selvasankar, R. K., 2011, In: Polimery/Polymers. 56, 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Mechanische Eigenschaften Nanopartikel-verstärkter Epoxidharze

    Pilz, G. & Stadelmann, S., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 181-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Mechanische Prüfungen an ABS-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Mechanische Prüfungen an unterschiedlichen Polypropylentypen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Mechanische und thermo-mechanische Untersuchungen an PIM Feedstock-Grünteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Mechanische Untersuchungen an mineralisch gefüllten Polypropylen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Medienbeständigkeit von Polyethylen für Langzeitanwendungen

    Wetscher, S., 2011

    Research output: Thesis › Master's Thesis

  25. Published

    Mehr Glanz, weniger Bindenähte

    Berger, G., Steinbichler, G. & Roock, S., 2011, In: Kunststoffe. p. 35-38

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Microstructure optimization and structure-property relationships of thermoplastic nanocomposites

    Feuchter, M., 2011, 140 p.

    Research output: Thesis › Doctoral Thesis

  27. Published

    Mikroskopie an Bruchflächen mehrerer Bauteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Mischteilberechnungen mittels FEM

    Kienzl, W., 2011, 113 p.

    Research output: Thesis › Master's Thesis

  29. Published

    MODELING THE IMPREGNATION PROCESS OF A SIPHON IMPREGNATION SYSTEM DURING FILAMENT WINDING

    Miaris, A., Päßler, M., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Molekulare Schichten auf Nickel- und Stahloberflächen und deren thermische Stabilität

    Mostegel, F., 2011

    Research output: Thesis › Master's Thesis

  31. Published

    Molmassenvverteilung von PMMA-Deckschichten

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    More Gloss, less weld lines

    Berger, G., Steinbichler, G. & Roock, S., 2011, In: Kunststoffe <München> / Kunststoffe international. p. 26-29

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Morphologische Charakterisierung von extrudierten Polyethylen/Polypropylen-Platten

    Sinic, J., 2011

    Research output: Thesis › Master's Thesis

  34. Published

    Morphologische Charakterisierung von Stumpfschweißverbindungen in Polyethylen-Rohrleitungen

    Arbeiter, F., 2011

    Research output: Thesis › Master's Thesis

  35. Published

    Nachruf auf O.Univ.-Prof. i. R. Dr. rer. nat. Dipl.-Phys. Werner Knappe

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 294-295

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Laske, S., Katschnig, M. & Balika, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Katschnig, M., Kracalik, M., Andraschek, N., Laske, S., Schäfer, U. & Balika, W., 2011, Abstract Book. p. 72-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Near infrared spectroscopy - a smart way of characterization and quality control of PP-NC

    Witschnigg, A., Laske, S., Holzer, C., Patel, R., Khan, A., Benkreira, H. & Coates, P., 2011, Enhanced Polymer Processing. p. 266-284

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Neue Maplan-Gummispritzmaschine für die Kunststofftechnik Leoben

    Friesenbichler, W., 2011, In: Österreichische Kunststoff-Zeitschrift. p. 293-293

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts

    Gruber, D. P., Berger, G., Pacher, G. & Friesenbichler, W., 2011, In: Polymer Testing. p. 651-656

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Novel Concepts for the Characterization of the Delamination Resistance of Fiber Reinforced Polymer Laminates

    Singer, G., 2011, 98 p.

    Research output: Thesis › Master's Thesis

  42. Published

    Numerical modelling of flow in conical co-rotating twin screw extruder

    Selvasankar, R. K., Schuschnigg, S., Fertschej, A. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Oberflächenaktivierung und Funktionalisierung von Polyethylen

    Angerbauer, D., 2011, 63 p.

    Research output: Thesis › Master's Thesis

  44. Published

    Online consolidation process optimization by means of process simulation

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, THEPLAC 2011. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    On the demolding of micro-structured surfaces for medical applications

    Struklec, T., 2011, 78 p.

    Research output: Thesis › Master's Thesis

  46. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Optimierte Auslegung durch druckabhängige nichtlinear viskoelastische Modellierung

    Tscharnuter, D., Gastl, S. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 142-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Optimierte RTM-Struktur-Bauteile für automotive Anwendungen

    Pilz, G., Loike, S. & Lammer, H., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 175-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Optimization of double-bond conversion of acrylic UV-curable resin formulationsJ

    Schauberger, J., Puchleitner, R., Yue, L., Rieß, G. & Kern, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Patterned Photoreactive Surface Layers Characterized by Friction Force Microscopy and Conductive Atomic-Force Microscopy

    Shen, Q., Pavitschitz, A., Hlawacek, G., Teichert, C., Edler, M., Radl, S., Grießer, T., Lex, A., Höfler, T., Trimmel, G. & Kern, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Petroleum Engineer's Guide to Oil Field Chemicals and Fluids

    Fink, J., 2011, 1. ed. ed. Amsterdam. 785 p.

    Research output: Book/Report › Book › Research

  52. Published

    Photolithographische Strukturierung von Polynorbornenderivaten mittels Thiol-en Reaktion

    Wolfberger, A., 2011

    Research output: Thesis › Master's Thesis

  53. Published

    Photosensitive Polymers bearing Fully Aromatic Esters for Multilayer Data Storage Devices

    Köpplmayr, T., Cardinale, M., Jakopic, G., Trimmel, G., Grießer, T. & Kern, W., 2011, In: Journal of materials chemistry. 21, p. 2965-2972

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Physikalische Prüfungen von Elastomer-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  55. Published

    Polymeres Papier als Beispiel für Nachhaltigkeit durch Innovation

    Laske, S., Katschnig, M. & Holzer, C., 2011, Umweltverträgliche Produktion und nachhaltiger Erfolg - Chancen, Benchmarks & Entwicklungslinien. p. 92-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  56. Published

    Polymerpapier auf Basis nachwachsender polymerer Rohstoffe

    Laske, S. & Holzer, C., 2011, Kurzfassungen der Vorträge "Zukunft - Forum Papier - Österreichische Papierfachtagung 2011". p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Potentiale von Faserverbundwerkstoffen für den Einsatz als Rotorkappenwerkstoff in Turbogeneratoren

    Endlweber, R., 2011, 72 p.

    Research output: Thesis › Master's Thesis

  58. Published

    Processing and properties of glass/polypropylene in long fibre compounding extrusion

    Schledjewski, R. & Priebe, M., 2011, In: Plastics, rubber and composites. 40, p. 374-379

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Properties of compression moulded new fully biobased thermoset composites with aligned flax fibre textiles

    Schledjewski, R., Pohl, T., Bierer, M., Natter, E., Madsen, B. & Hoydonckx, H., 2011, In: Plastics, rubber and composites. 40, p. 294-299

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Prozessevaluierung zur Herstellung von Lichtwellenleitern auf Leiterplatten

    Mayr, L., 2011

    Research output: Thesis › Master's Thesis

  61. Published

    Ramanspektroskopische Untersuchungen von Rohroberflächen

    Bruckmoser, K., Pinter, G. & Resch, K., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Replication of Stochastic and Geometric Micro Structures. Aspects of Visual Appearance

    Berger, G., Gruber, D. P., Friesenbichler, W., Teichert, C. & Burgsteiner, M., 2011, In: International polymer processing. XXVI, p. 313-322

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Research into the processing of composites

    Schledjewski, R., 2011, In: Public service review: European science & technology : an independent reviewPublic Service Review. 2011, 11, p. 33-33

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Rheological, thermal and mechanical characterizations of polyolefin-algae compounds

    Piontek, M., Laske, S., Rieß, G. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 127-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Ring Opening Methathesis Polymerisation Derived Polymers as Photoresists: Making Use of Thiol-ene Chemistry

    Wolfberger, A., Rupp, B., Kern, W., Grießer, T. & Slugovc, C., 2011, In: Macromolecular rapid communications. 32, p. 518-522

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    RING WINDING TECHNOLOGY – INCREASED PROCESS EFFICIENCY AND EFFECTS ON THE MECHANICAL PROPERTIES OF RING SPECIMENS

    Päßler, M., Miaris, A., Schledjewski, R. & Mitschang, P., 2011, Proc. of the ASME 2011 Pressure Vessels and Piping Conference PVP 2011. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Schicht mit einem Lichtwellenleiter und Verfahren zu deren Herstellung

    Feldbacher, S. (Inventor), Woods, R. (Inventor) & Kern, W. (Inventor), 2011, Patent No. AT512001B1, Priority date 23 Sept 2011, Priority No. A1376/2011

    Research output: Patent

  69. Published

    Schlagbiegeuntersuchungen an gefüllten Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  70. Published

    Selective Immobilization of Silicon Dioxide Nanoparticle Polymer Surfaces

    Muhr, N., Grießer, T. & Kern, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Simulation des kontinuierlichen Schweißprozesses

    Narnhofer, M., Schledjewski, R. & Mitschang, P., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Smart Windows - Smart Collectors: Entwicklung und Charakterisierung von Überhitzungsschutzverglasungen für Gebäudeverglasungen und thermische Solarkollektoren

    Resch, K. & Weber, A., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 429-433

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Statische Zugversuche an Compositerohren

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Status und Potentiale der Automation in der Verarbeitung von Faser-Kunststoff-Verbunden

    Fauster, E., Kastanis, D. & Schledjewski, R., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Strength and fracture analysis of silicon-based components for embedding

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Surface Modification of Unfilled and Highly Filled Polylactic Acid Films Using Corona Discharge Treatment

    Laske, S., Rüf, E., Piontek, M. & Holzer, C., 2011, In: Journal of characterization and development of novel materials. 4, 2, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    The Future of Polymer Processing

    Holzer, C., 2011, Cetrdeseta obljetnica usmjerenja prerada polimera. p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    The Future of Polymer Processing

    Holzer, C., 2011, In: Polimeri. p. 124-129

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Thermo-kalorimetrische Untersuchung an Duromerwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau - Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D. & Tscharnuter, D., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Thermotropic glazings for overheating protection applications: Tuning the light-shielding efficiency by systematic material prei-selection and formulation

    Weber, A. & Resch, K., 2011, 6th Energy Forum "Solar Buliding Skins". p. 73-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Thermotropic glazings for overheating protection of solar collectors: structure-property relationships

    Weber, A., Resch, K. & Schmid, A., 2011, 12th Experts Meeting IEA SHC Task 39. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Two step organo-modification of layered silicates

    Puchleitner, R., 2011, 92 p.

    Research output: Thesis › Master's Thesis

  86. Published

    Uniaxial nonlinear viscoelastic viscoplastic modeling of polypropylene

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: Mechanics of time-dependent materials. 16, 3, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Untersuchung der Dispergierung von dem Arzneimittel Paracetamol in einer Kunststoffmatrix

    Resch, K. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  88. Published

    Untersuchung des Haftungsverhaltens von PV-Einbettfolien zu Glas und zum Rückseitenlaminat

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Untersuchungen an 13 Polyethylen-Proben

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  90. Published

    Untersuchung von PP-Folien

    Aust, N., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    UV induced microcellular foaming - A new approach towards the production of 3D structures in offset printing

    Schloegl, S., Reischl, M., Ribitsch, V. & Kern, W., 2011, In: Progress in organic coatings. 73, p. 54-61

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    UV induced microcellular foaming-A new approach towards the production of 3D structures in offset printing techniques

    Schlögl, S., Kern, W., Reischl, M. & Ribitsch, V., 2011, In: Progress in organic coatings. p. 54-61

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Verbundhaftungsuntersuchungen an Zweikomponenten-Spritzgussteilen

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 153-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Verfahrensentwicklung von physikalisch geschäumten Polypropylenplatten für den Einsatz als Kernmaterial von Sandwichverbunden

    Braun, A. C., 2011, 303 p.

    Research output: Thesis › Doctoral Thesis

  95. Published

    Vergleichende mechanisch und thermomechanische Untersuchungen an Vitonmembranen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  96. Published

    Vergleichende optische und thermo-kalorimetrische Untersuchungen an PBT Bauteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Verweilzeitmessung in Extrudern mittels dielektrischer Substanzen

    Schuschnigg, S., Fertschej, A., Silberhorn, M. & Holzer, C., 2011, 2. Tagung Innovation Messtechnik. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Wärmeformbeständigkeitsuntersuchunen an UP-Harz-Werkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Water Soluble Polymers

    Fink, J., 2011

    Research output: Book/Report › Book › Research

  100. Published

    Werkstoffcharakterisierung, Materialmodellierung und Simulaton von CFK-Geflechtlaminaten

    Wolfahrt, M., Cichosz, J., Gager, J., Hinterhölzl, R., Pettermann, H. E., Frieß, S., Pinter, G. & Noisternig, J., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 101-111

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Zugprüfungen an PVC-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...26 27 28 29 30 31 32 33 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301