Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1201 - 1300 out of 4,192Page size: 100

Research output

  1. 2018
  2. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  4. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP LGF

    Duretek, I., 16 May 2018, 26 p.

    Research output: Book/Report › Commissioned report › Research

  5. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Induced material degradation of elastomers in harsh environments

    Balasooriya, W., Schrittesser, B., Pinter, G. & Schwarz, T., 15 May 2018, (E-pub ahead of print) In: Polymer Testing. 69.2018, August, p. 107-115 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Thermo-physical characteristics, mechanical performance and long-term stability of high temperature latent heat storages based on paraffin-polymer compounds

    Resch-Fauster, K. & Feuchter, M., 10 May 2018, In: Thermochimica Acta. 663.2018, 10 May, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Material selection, testing and validation of additively manufactured components

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 9 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Application of J-integral methods to tough pipe materials

    Gosch, A., Arbeiter, F., Berer, M., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Fracture mechanic principles for multi-layer pipe-wall design

    Arbeiter, F., Gosch, A., Wiener, J., Frank, A. & Pinter, G. G., 7 May 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  11. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Cranial polyetheretherketone implants by extrusion–based additive manufacturing: state of the art and prospects

    Katschnig, M. & Holzer, C., 1 May 2018, In: Material Science & Engineering International Journal. 2.2018, 3, p. 66-68 3 p.

    Research output: Contribution to journal › Review article › peer-review

  14. Published

    Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms

    Sarac, B., Karazehir, T., Mühlbacher, M., Kaynak, B., Gammer, C., Schöberl, T., Sarac, A. S. & Eckert, J., 1 May 2018, In: ACS Applied Energy Materials. 1.2018, 6, p. 2630-2646 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Bestimmung der thermodynamischen und mechanischen Stoffdaten für ein PBT-Compound PBT GF 30

    Duretek, I., 27 Apr 2018, 16 p.

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Herstellung eines thermoplastischen Blends und dessen rheologische und thermodynamische Analyse

    Duretek, I., 27 Apr 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Flow behavior of PP‐polymer nanocomposites in injection molding hyperbolical dies

    Mitsoulis, E., Battisti, M., Neunhäuserer, A., Perko, L. & Friesenbichler, W., 24 Apr 2018, In: Advances in Polymer Technology. 37.2018, 8, p. 3045-3055 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Anforderungen an die Aufbereitung von Polyamid-Altpulver zur Wiederverwendung im SLS Prozess

    Berer, M., Schrank, T., Hendlich, M., Meier, G., Arbeiter, F., Lackner, J. & Kraschitzer, W., 20 Apr 2018.

    Research output: Contribution to conference › Paper

  20. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W., Friesenbichler, W. & Berger-Weber, G., 20 Apr 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Strukturbauteile aus dem 3D-Drucker: begleitende Werkstoffprüfung zur Eigenschaftsoptimierung

    Arbeiter, F., Wiener, J., Spörk, M. & Pinter, G. G., 20 Apr 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  22. Published

    Additiv gefertigte Hybridbauteile mittels dualer Direktextrusion

    Katschnig, M., 19 Apr 2018, Schriftenreihe Kunststofftechnik Leoben: 27 Leobner Kunststoffkolloquium "Print and Coat". Kern, W. (ed.). Leoben, Vol. 8. p. 177 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 255 -256 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Highly-filled Polymers for Fused Filament Fabrication

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Holzer, C. & Kukla, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 93-102 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Material Extrusion Additive Manufacturing for Photocatalytic Applications

    Gonzalez-Gutierrez, J., Jiang, W., Lichal, C., Schuschnigg, S., Huang, L. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben, Vol. 27. p. 259-260 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing

    Kaynak, B., Spörk, M., Shirole, A., Ziegler, W. & Sapkota, J., 14 Apr 2018, In: Macromolecular materials and engineering. 303.2018, 5, 8 p., 1800037.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Factors influencing CRB test results

    Poduska, J., Hutař, P., Kucera, J., Frank, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 105. 109 p.

    Research output: Contribution to conference › Paper

  31. Published

    Study of mixed mode crack propagation in pipe type specimen

    Slavik, O., Hutar, P., Berer, M., Gosch, A., Arbeiter, F. & Náhlík, L., 11 Apr 2018, p. 133. 138 p.

    Research output: Contribution to conference › Paper

  32. Published

    Tailoring the interfaces in glass fiber-reinforced photopolymer composites

    Sahin, M., Schlögl, S., Kalinka, G., Wang, J., Kaynak, B., Mühlbacher, I., Ziegler, W., Kern, W. & Grützmacher, H., 11 Apr 2018, In: Polymer. 141, p. 221-231 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates

    Samusjew, A., Lassnig, A., Cordill, M. J., Krawczyk, K. & Grießer, T., 1 Apr 2018, In: Advanced Materials Technologies. 3, 4, 1700250.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Influence of Environmentally Affected Hole-Transport Layers on Spatial Homogeneity and Charge-Transport Dynamics of Organic Solar Cells

    Chien, H. T., Pilat, F., Griesser, T., Fitzek, H., Poelt, P. & Friedel, B., 28 Mar 2018, In: ACS Applied Materials and Interfaces. 10, 12, p. 10102-10114 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of strand orientation on mechanical properties in near homogeneous FFF produced PLA parts

    Wiener, J., Arbeiter, F., Spörk, M., Gosch, A. & Pinter, G. G., 27 Mar 2018.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Toughening of polymeric materials by utilizing spatial material property variations: Towards bio-inspired multi-layered materials

    Arbeiter, F., Wiener, J., Gosch, A., Pinter, G. G. & Kolednik, O., 25 Mar 2018, p. 1. 4 p.

    Research output: Contribution to conference › Paper

  37. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPU-Compound der Type

    Duretek, I., 13 Mar 2018, 11 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 Mar 2018, In: Polymer Testing. 67.2018, May, p. 309-321 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Bestimmung der rheologischen Stoffdaten für ein TPU-Compound mit Farbmasterbatch

    Duretek, I., 9 Mar 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  40. E-pub ahead of print

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Enhancement of the Insulation Properties of Poly(2-oxazoline)-co-Polyester Networks by the Addition of Nanofillers

    Eibel, A., Marx, P., Jin, H., Tsekmes, I. A., Mühlbacher, I., Smit, J. J., Kern, W. & Wiesbrock, F., 1 Mar 2018, In: Macromolecular rapid communications. 39, 6, 1700681.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Simulationsgestützter Vergleich von additiv gefertigten zu konventionellen hochwärmeleitfähigen Formeinsätzen für Spritzgießwerkzeuge

    Berger-Weber, G., Zorn, D., Panzl, G. & Bevc, F., 1 Mar 2018, 2 p. Linz

    Research output: Other contribution › Research

  43. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Determination of the pvT-behaviour for two pharmaceutical mixtures

    Duretek, I. & Winkler, S., 15 Feb 2018, 6 p.

    Research output: Book/Report › Commissioned report › Research

  45. Published

    Tribological behavior of HNBR in oil and gas field applications

    Balasooriya, W., Schrittesser, B., Wang, C., Hausberger, A., Pinter, G. & Schwarz, T., 13 Feb 2018, In: Lubricants. 6.2018, 1, 16 p., 20.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Effect of the water absorptive capacity of reinforcing fibers on the process ability, morphology, and performance characteristics of composites produced from polyfurfuryl alcohol

    Resch-Fauster, K., Dzalto, J., Anusic, A. & Mitschang, P., 12 Feb 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 13-23 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Bestimmung der thermodynamischen Stoffdaten für ein TPO-Compound

    Duretek, I., 8 Feb 2018, 8 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Reciclado de sólidos de orificios de perforación en polímeros

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 16 Jan 2018, IPC No. C08K 3/ 34 A I, Patent No. ES2650001T, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  49. Published

    RECYCLING OF BOREHOLE SOLIDS IN POLYMERS

    Hofstätter, H. (Inventor) & Holzer, C. (Inventor), 13 Jan 2018, Patent No. NO2756028T, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  50. Published

    Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

    Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 105-113 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

    Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 5 Jan 2018, In: Polymer Testing. 66.2018, April, p. 24-31 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Calculation of cyclic plastic surface deformations in Rails-quasistatic Fe models

    Pletz, M., Daves, W., Künstner, D. & Scheriau, S., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. p. 784-791 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Interaction of industrially relevant cationic starches with cellulose

    Niegelhell, K., Chemelli, A., Hobisch, J., Griesser, T., Reiter, H., Hirn, U. & Spirk, S., 1 Jan 2018, In: Carbohydrate Polymers. 179, p. 290-296 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Photoactive silica nanoparticles: Influence of surface functionalization on migration and kinetics of radical-induced photopolymerization reactions

    Sahin, M., Krawczyk, K. K., Roszkowski, P., Wang, J., Kaynak, B., Kern, W., Schlögl, S. & Grützmacher, H., 1 Jan 2018, In: European polymer journal. 98, p. 430-438 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Surface chemical functionalization of cellulose nanocrystals by 3-aminopropyltriethoxysilane

    Khanjanzadeh, H., Behrooz, R., Bahramifar, N., Gindl-Altmutter, W., Bacher, M., Edler, M. & Griesser, T., 1 Jan 2018, In: International Journal of Biological Macromolecules. 106, p. 1288-1296 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Tuning of material properties of ZnO thin films grown by plasma-enhanced atomic layer deposition at room temperature

    Pilz, J., Perrotta, A., Christian, P., Tazreiter, M., Resel, R., Leising, G., Griesser, T. & Coclite, A. M., 1 Jan 2018, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 36, 1, 01A109.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    About switchable material properties and selfhealing strategies: using the reversible nature of anthracenes in stimuli-responsive polymers

    Radl, S., Giebler, M., Kaiser, S., Manhart, J. C., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  58. Published

    About switchable material properties and selfhealing strategies: using the reversible nature of anthracenes in stumuli-responsive polymers

    Radl, S., Giebler, M., Kaiser, S., Manhart, J., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  59. Published

    Advanced Part Quality Testing – Compression Set vs. Non-Destructive and Fast Measurement Device JIDOKA S101 II

    Kerschbaumer, R., Lechner, B. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Aging Mechanism of Polyethylene Pipe Material in Chlorine Dioxide and Hypochlorite Solution

    Bredács, M., Frank, A., Bastero, A., Stolarz, A. & Pinter, G. G., 2018, Proceedings Plastics Pipes XIX. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Aktivierung und Charakterisierung von Kunststoffoberflächen

    Kern, W. & Fankhauser, P., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    A Model to Describe the Transient Temperature Build Up During Dosing of a Rubber Injection Molding Machine

    Kerschbaumer, R. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Analysis and Development of Transport Phenomena Models for PV Modules

    Castillon, L., Oreski, G. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  64. Published

    Antiadhäsive Hybrid-Beschichtungen für Formen und Werkzeuge in der Kunststoffverarbeitung

    Kaynak, B., Fecke, N. & Kern, W., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Antiblocking Additives

    Fink, J., 2018, Handbook of Industrial Polyethylene and Technology. Spalding, M. A. & Chatterjee, A. M. (eds.). Beverly, MA Hoboken, New Jersey, p. 833 852 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  66. Published

    A STRENGTH BASED APPROACH ON S-N CURVES FOR THE FATIGUE LIFE ASSESSMENT OF CONTINUOUSLY FIBER REINFORCED COMPOSITES

    Pinter, G. G., Gaier, C., Maier, J., Fischmeister, S. & Dannbauer, H., 2018, Proceedings ICFC7. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Automated thermoplastic tape placement – Is there a missing link to reach industrialization?

    Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Beschichtungen für Formen und Werkzeuge in der kunststoffverarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, 27. Leobener Kunststoffkolloquium.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Beschichtung mit beschränkter Haftung

    Krempl, N., Bandl, C., Gröger, T., Kern, W. & Friesenbichler, W., 2018, In: Chemiereport.at : Austrian life sciences ; Österreichs Magazin für Chemie, Life Sciences & Materialwissenschaften. p. 49 52 p., 8.

    Research output: Contribution to journal › Article › Research

  70. Published

    Biomimetic Design Concepts for the Pipe Architecture of Tomorrow

    Pinter, G. G., Arbeiter, F., Wiener, J., Frank, A. & Kolednik, O., 2018, Proceedings Plastics Pipes XIX. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Bio-Polyethylene and Polyethylene-Biopolymer Blends

    Fink, J., 2018, Handbook of Industrial Polyethylene and Technology. Spalding, M. A. & Chatterjee, A. M. (eds.). Beverly, MA Hoboken, New Jersey, p. 1253 1296 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  72. Published

    Characterisation of degradation behaviour and material interactions in PV modules

    Barretta, C., Oreski, G., Resch-Fauster, K. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  73. Published

    Characterization and modeling of the cure-induced shrinkage of an epoxy resin used in organic laminate based electronic modules

    Zündel, J. V., 2018

    Research output: Thesis › Master's Thesis

  74. Published

    Comparison of real and simulated failure times based on the slow crack growth behavior

    Berger, I. J., Frank, A., Pinter, G. G., Nitsche, D. & Petry, D., 2018, Proceedings ANTEC 2018. 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Comparison of the photolytic versus the hydrolytic degradation of dual-responsive polydimethylsiloxane network

    Giebler, M., Radl, S. V., Ast, M., Grießer, T., Kern, W. & Schlögl, S., 2018.

    Research output: Contribution to conference › Poster › Research

  76. Published

    Control of Material Behavior and Media Resistance of Carboxylated Nitrile Butadiene Rubber (XNBR)

    Fleischmann, D. D., Schlögl, S., Arbeiter, F. & Kern, W., 2018.

    Research output: Contribution to conference › Poster › Research

  77. Published

    Design von schaltbaren Polymeren - neue Konzepte für intelligente Beschichtungen

    Schlögl, S. & Radl, S., 2018, Tagungsband des 27. Leobener Kunststoff-Kolloquiums.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Determination of the friction coefficient in dry-fiber filament winding

    Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Determination of the mode I strain energy release rate in carbon fibre reinforced composites by means of digital image correlation technique

    Khudiakova, A., Wolfahrt, M., Godec, D. & Pinter, G. G., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Determination of the Slow Crack Growth Resistance of PA12 Pipe Grades

    Messiha, M., Frank, A., Berger, I. J., Heimink, J., van Laak, H., Arbeiter, F. & Pinter, G. G., 2018, Proceedings Plastics Pipes XIX. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    Determination of the temperature of an industrial rubber compound after dosing. A new ultrasound based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  82. Published

    Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound

    Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 39.2018, 2, p. 360-367 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Development of Non-Destructive Methods for Acetic Acid Detection in Photovoltaic Modules

    Barretta, C., Oreski, G., Resch-Fauster, K. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  84. Published

    Development of novel bio-based epoxy resins: Study of the curing reaction between epoxidized plant oil and different hardeners

    Anusic, A., Resch-Fauster, K. & Mahendran, A. R., 2018, In: Journal of Chemical Engineering & Process Technology.

    Research output: Contribution to journal › Meeting Abstract

  85. Published

    Dünne CFK-Schaum-Sandwichstrukturen - Bewertung unterschiedlicher Fertigungsmöglichkeiten

    Weninger, M., 2018

    Research output: Thesis › Master's Thesis

  86. Published

    Effect of surface interactions on the insulating properties of epoxy composites

    Marx, P., Wanner, A. J., H., J., Tsekmes, I. A., Smit, J. J., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., POLY-77.

    Research output: Contribution to journal › Meeting Abstract

  87. Published

    Einfluss des Einspritzvolumenstroms auf die Verschleißfestigkeit eines hochchromhaltigen martensitischen pulvermetallurgischen Stahls

    Schmidt, T., 2018

    Research output: Thesis › Master's Thesis

  88. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Evaluation of Digital Image Correlation Techniques for the Determination of Coefficients of Thermal Expansion for Thin Reinforced Polymers

    Gschwandl, M., Frewein, M., Fuchs, P. F., Antretter, T., Pinter, G. G. & Novàk, P., 2018, EMAP 2018 Conference Proceedings. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Evaluierung eines Thiol-In-Systems für den Einsatz in biokompatiblen 3D-gedruckten Verbundmaterialien

    Rieger, P., 2018

    Research output: Thesis › Master's Thesis

  91. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  92. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Fabrication of nanocomposites with silica nanoparticles

    Constantinescu, D. M., Apostol, D. A., Picu, C. R., Krawczyk, K., Sieberer, M., Hadar, A. & Feuchter, M., 2018, In: Materials Today: Proceedings. p. 26727 26732 p., 5.

    Research output: Contribution to journal › Conference article › peer-review

  94. Published

    Fatigue fracture properties and morphology of Polyoxymethylene (POM) plates produced under moderate processing conditions

    Berer, M., Halb, M., Feuchter, M., Pacher, G. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Poster › Research

  95. Published

    Fracture mechanical approach to identify the behavior of elastomers in hostile environments

    Balasooriya, W., Schrittesser, B., Pinter, G. G. & Schwarz, T., 2018.

    Research output: Contribution to conference › Poster › Research

  96. Published

    Fracture mechanical characterization of non-virgin pipe materials

    Frank, A., Berger, I. J., Koch, T., Arbeiter, F. & Pinter, G. G., 2018, Proceedings ANTEC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Fuel Cells, Solar Panels, and Storage Devices

    Fink, J., 2018, Wiley-VCH .

    Research output: Book/Report › Book › Research

  98. Published

    Gradient polymer composites for optimum heat dissipation

    Marx, P., Morak, M., Gschwandl, M., Fuchs, P., Antretter, T., Pfost, M., Kern, W. & Wiesbrock, F., 2018, In: Journal of the American Chemical Society. 2, 1 p., PMSE-772.

    Research output: Contribution to journal › Meeting Abstract

  99. Published

    High Performance Composites Produced from Polyfurfuryl Alcohol: Enhancing the Process Ability at Short Cycle Times by Applying Hydrophilic Reinforcement

    Resch-Fauster, K., Dzalto, J., Anusic, A. & Mitschang, P., 2018, Proceedings of ECCM18 - 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Hyperelastic modeling of woven structures undergoing large deformations

    Mansouri, Fuchs, P. F. & Schuecker, C., 2018.

    Research output: Contribution to conference › Paper

  101. Published

    Impact of polyolefin impurities on lifetime relevant properties of polyethylene and polypropylene

    Messiha, M., 2018

    Research output: Thesis › Master's Thesis

Previous 1...9 10 11 12 13 14 15 16 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301