Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1 - 50 out of 4,190Page size: 50

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Kratzer, M., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  4. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 27. März 2025, ??? Stand: 27. März 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Frontal polymerization of thiol-acrylate covalent adaptable networks

    Schmidleitner, C., Kriehuber, M. U., Korotkov, R., Schlögl, S. & Rossegger, E., 14 Jan 2025, In: Polymer Chemistry. 16.2025, 8, p. 963-971 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different Climates

    Barretta, C., Macher, A., Köntges, M., Ascencio-Vasquez, J., Topic, M. & Oreski, G., 9 Jan 2025, In: IEEE Journal of Photovoltaics. 15.2025, 2, p. 290-296 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190.2025, January, 8 p., 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2024
  14. Published

    3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

    Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dec 2024, In: Polymers. 16.2024, 24, 19 p., 3614.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Surface Functionalization of Activated Carbon: Coupling of 3-(Aminopropyl)trimethoxysilane and (3-Glycidyloxypropyl)trimethoxysilane

    Pustahija, L., Bandl, C., Alem, S. A. A. & Kern, W., 12 Dec 2024, In: C-Journal of Carbon Research. 10.2024, 4, 16 p., 104.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Lead-free dielectric thin films: Synthesis of Ag(Nb1−xTax)O3 via reactive dc magnetron sputtering

    Kölbl, L., Mehrabi, M., Griesser, T., Munnik, F. & Mitterer, C., 6 Dec 2024, In: Journal of vacuum science & technology / A (JVST). 43.2024, 1, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Wavelength-Dependent Dynamic Behavior in Thiol-Ene Networks Based on Disulfide Exchange

    Sölle, B., Schmallegger, M., Schlögl, S. & Rossegger, E., 1 Dec 2024, In: Journal of the American Chemical Society. 146.2024, 49, p. 34152–34157 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Deformation and fracture of lithosphere-inspired polymeric multi-layer composites

    Waly, C., Höller, R., Griesser, T. & Arbeiter, F., Dec 2024, In: Results in Engineering. 24.2024, December, 9 p., 103519.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology

    Knabl, F., Gutnik, D., Patil, P., Bandl, C., Vermeij, T., Pichler, C. M., Putz, B. & Mitterer, C., Dec 2024, In: Vacuum. 230, 113724.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Advancing the next generation of high-performance metal matrix composites through metal particle reinforcement

    Alem, S. A. A., Sabzvand, M. H., Govahi, P., Poormehrabi, P., Hasanzadeh Azar, M., Salehi Siouki, S., Rashidi, R., Angizi, S. & Bagherifard, S., 27 Nov 2024, In: Advanced Composites and Hybrid Materials. 8.2025, 1, 68 p., 3.

    Research output: Contribution to journal › Review article › peer-review

  22. Published

    Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

    Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 18 p., 110540.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Polyethylene pipes for distribution of gaseous hydrogen

    Arbeiter, F., Bredács, M., Fechtig, D. & Bradler, P., 22 Nov 2024, p. 1. 6 p.

    Research output: Contribution to conference › Paper

  24. Published

    Christian Doppler Laboratory for Impact of Recycled Materials on the mechanical lifetime estimation of polymers

    Maurer, C., Zach, D., Travnicek, L. & Arbeiter, F., 21 Nov 2024, p. 1-1.

    Research output: Contribution to conference › Poster › Research

  25. Published

    CircularBioMat

    Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Light-Driven, Reversible Spatiotemporal Control of Dynamic Covalent Polymers

    Reisinger, D., Sietmann, A., Das, A., Plutzar, S., Korotkov, R., Rossegger, E., Walluch, M., Holler-Stangl, S., Hofer, T. S., Dielmann, F., Glorius, F. & Schlögl, S., 21 Nov 2024, In: Advanced materials. 36.2024, 47, 2411307.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Manufacturing of Soft Dielectric Actuator Assemblies by Material Extrusion (MEX)

    Raguz, I., Berer, M., Beier, P., Schlögl, S., Brancart, J., Vanderborght, B. & Holzer, C., 21 Nov 2024, p. 143-151. 9 p.

    Research output: Contribution to conference › Paper

  29. Published

    Numerical simulation of non-pressure polypropylene pipes in underground operating conditions

    Travnicek, L., Arbeiter, F. & Poduška, J., 21 Nov 2024, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  30. Published

    A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

    May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio filler

    Clute, C., Hafner, T., Balasooriya, W., Kaiser, A., Pinter, G. & Schlögl, S., 19 Nov 2024, In: International Journal of Hydrogen Energy. 91.2024, 19 November, p. 404-411 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Advancements in Intelligent Rock Bolt Measurement: A General Approach

    Varelija, M., Vailhe, P. & Hartlieb, P., 15 Nov 2024, Conference proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Analyse und Optimierung von österreichischem Polystyrol-Haushaltsabfall für die Wiederverwendung in Joghurtbecher-Lebensmittelverpackungen

    Krempl, N., Frühwirth, M., Zidar, D., Shahroodi, Z., Holzer, C., Pinter, E., Archodoulaki, M. V., Bichler, L., Jahn, E., Gabriel, V. H. & Aschermayer, F., 13 Nov 2024, VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz. p. 305-312 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    An optimization strategy for customizable global elastic deformation of unit cell-based metamaterials with variable material section discretization

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., 12 Nov 2024, In: Advances in Engineering Software. 199.2025, January, 17 p., 103817.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Recycling of Wintersport Hardgoods - The Challenges of Circularity

    Zidar, D., Krempl, N., Pardametz, V., Bandl, C., Holzer, C., Griesser, T. (Editor) & Ladstätter, E. (Editor), Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. p. 39-47 9 p. (Publication Series Polymer Engineering & Science Leoben; vol. 13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Design of photocurable thiol-epoxy resins for the processing of vitrimers with vat photopolymerisation 3D printing

    Gaca, S., Dietliker, K., Rossegger, E. & Schlögl, S., 30 Oct 2024, In: Reactive and Functional Polymers. 205.2024, December, 9 p., 106085.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured composites

    Stiller, T., Kerschbaumer, R. C., Waly, C., Zink, B., Slapnik, J. & Pinter, G., 30 Oct 2024, In: Results in Engineering. 24.2024, December, 10 p., 103276.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties

    Kopp, D., Bandl, C., Kaindl, R., Prethaler, T., Coclite, A. M. & Waldhauser, W., 27 Oct 2024, In: Coatings. 14.2024, 11, 18 p., 1365.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Enhancing Recycled Polymers: The Impact of Reused Glass Fiber Composites on Rheological Properties and Processing Performance

    Shahroodi, Z., Krempl, N., Duretek, I. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  40. Published

    Insights Into LAOS Analysis of Liquid Silicone Rubber for Viscosity Determination

    Azevedo, M., Kerschbaumer, R. C. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  41. Published

    Rheological Characterisation of Powder Injection Moulding Feedstocks

    Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  42. Published

    Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced composites

    Sharma, H., Bijalwan, V., Mourad, A. H. I., Kumar, A., Schlögl, S. & Rana, S., 24 Oct 2024, In: Journal of Reinforced Plastics and Composites. ??? Stand: 10. Februar 2025, ??? Stand: 10. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Challenges and Opportunities in Carbon Fiber-Reinforced Polymer Composites Circularity: A Prospective LCA Case Study

    Miao, Z. C., Kirschnick, U., Chen, H. & Carbajales-Dale, M., 23 Oct 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Efficient surface defect detection in industrial screen printing with minimized labeling effort

    Krassnig, P. J., Haselmann, M., Kremnitzer, M. & Gruber, D. P., 18 Oct 2024, In: Integrated computer-aided engineering. 32.2025, 1, p. 1-21 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

    Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Oct 2024, In: Polymers. 16.2024, 19, 13 p., 2799.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 02: Crosslink density via multi-stage swelling analysis

    Gehling, T., Kerschbaumer, R. C., Pinter, G., Fasching, M. A., Schwarz, T. & Schieppati, J., 26 Sept 2024, In: Polymer. 312.2024, 24 October, 12 p., 127661.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Tuning Surface Properties of Thiol-Ene Polymers for Microfluidic Systems

    Maier, J., Schlögl, S., Griesser, T. & Salehi Siouki, S., 18 Sept 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Sputter deposited silver niobate thin films: Pathway towards phase purity

    Kölbl, L., Kobald, A., Griesser, T., Munnik, F. & Mitterer, C., 15 Sept 2024, In: Thin solid films. 804.2024, 15 September, 9 p., 140505.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Enhance hydrogen storage in lightweight solid-state systems based on Poly (vinylnaphthalene)

    Sharifian, M., Kern, W., Rieß, G. & Kostoglou, N., 10 Sept 2024, In: International Journal of Hydrogen Energy . 87.2024, 18 October, p. 713-721 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301