Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

1 - 100 out of 4,190Page size: 100

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Kratzer, M., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  4. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    On the effect of isotropic and anisotropic dissipative response functions with associated and nonassociated flow on the inelastic behavior of polymeric composites

    Gaddikere Nagaraja, S., Antretter, T. & Schuecker, C., 16 Feb 2025, In: Mechanics of advanced materials and structures. ??? Stand: 27. März 2025, ??? Stand: 27. März 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Frontal polymerization of thiol-acrylate covalent adaptable networks

    Schmidleitner, C., Kriehuber, M. U., Korotkov, R., Schlögl, S. & Rossegger, E., 14 Jan 2025, In: Polymer Chemistry. 16.2025, 8, p. 963-971 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different Climates

    Barretta, C., Macher, A., Köntges, M., Ascencio-Vasquez, J., Topic, M. & Oreski, G., 9 Jan 2025, In: IEEE Journal of Photovoltaics. 15.2025, 2, p. 290-296 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190.2025, January, 8 p., 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2024
  14. Published

    3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass

    Bergoglio, M., Kriehuber, M., Sölle, B., Rossegger, E., Schlögl, S., Najmi, Z., Cochis, A., Ferla, F., Miola, M., Vernè, E. & Sangermano, M., 23 Dec 2024, In: Polymers. 16.2024, 24, 19 p., 3614.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Surface Functionalization of Activated Carbon: Coupling of 3-(Aminopropyl)trimethoxysilane and (3-Glycidyloxypropyl)trimethoxysilane

    Pustahija, L., Bandl, C., Alem, S. A. A. & Kern, W., 12 Dec 2024, In: C-Journal of Carbon Research. 10.2024, 4, 16 p., 104.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Lead-free dielectric thin films: Synthesis of Ag(Nb1−xTax)O3 via reactive dc magnetron sputtering

    Kölbl, L., Mehrabi, M., Griesser, T., Munnik, F. & Mitterer, C., 6 Dec 2024, In: Journal of vacuum science & technology / A (JVST). 43.2024, 1, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Wavelength-Dependent Dynamic Behavior in Thiol-Ene Networks Based on Disulfide Exchange

    Sölle, B., Schmallegger, M., Schlögl, S. & Rossegger, E., 1 Dec 2024, In: Journal of the American Chemical Society. 146.2024, 49, p. 34152–34157 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Deformation and fracture of lithosphere-inspired polymeric multi-layer composites

    Waly, C., Höller, R., Griesser, T. & Arbeiter, F., Dec 2024, In: Results in Engineering. 24.2024, December, 9 p., 103519.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology

    Knabl, F., Gutnik, D., Patil, P., Bandl, C., Vermeij, T., Pichler, C. M., Putz, B. & Mitterer, C., Dec 2024, In: Vacuum. 230, 113724.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Advancing the next generation of high-performance metal matrix composites through metal particle reinforcement

    Alem, S. A. A., Sabzvand, M. H., Govahi, P., Poormehrabi, P., Hasanzadeh Azar, M., Salehi Siouki, S., Rashidi, R., Angizi, S. & Bagherifard, S., 27 Nov 2024, In: Advanced Composites and Hybrid Materials. 8.2025, 1, 68 p., 3.

    Research output: Contribution to journal › Review article › peer-review

  22. Published

    Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

    Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 18 p., 110540.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Polyethylene pipes for distribution of gaseous hydrogen

    Arbeiter, F., Bredács, M., Fechtig, D. & Bradler, P., 22 Nov 2024, p. 1. 6 p.

    Research output: Contribution to conference › Paper

  24. Published

    Christian Doppler Laboratory for Impact of Recycled Materials on the mechanical lifetime estimation of polymers

    Maurer, C., Zach, D., Travnicek, L. & Arbeiter, F., 21 Nov 2024, p. 1-1.

    Research output: Contribution to conference › Poster › Research

  25. Published

    CircularBioMat

    Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Light-Driven, Reversible Spatiotemporal Control of Dynamic Covalent Polymers

    Reisinger, D., Sietmann, A., Das, A., Plutzar, S., Korotkov, R., Rossegger, E., Walluch, M., Holler-Stangl, S., Hofer, T. S., Dielmann, F., Glorius, F. & Schlögl, S., 21 Nov 2024, In: Advanced materials. 36.2024, 47, 2411307.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Manufacturing of Soft Dielectric Actuator Assemblies by Material Extrusion (MEX)

    Raguz, I., Berer, M., Beier, P., Schlögl, S., Brancart, J., Vanderborght, B. & Holzer, C., 21 Nov 2024, p. 143-151. 9 p.

    Research output: Contribution to conference › Paper

  29. Published

    Numerical simulation of non-pressure polypropylene pipes in underground operating conditions

    Travnicek, L., Arbeiter, F. & Poduška, J., 21 Nov 2024, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  30. Published

    A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

    May, D., Advani, S. G., Duhovic, M., Endruweit, A., Fauster, E., George, A., Liotier, P. J., Lira, C., Lomov, S. V., Pucci, M. F., Schmeer, S., Abliz, D., Berg, D. C., Binetruy, C., Bodaghi, M., Comas-Cardona, S., Etchells, M., Govignon, Q., Koorevaar, A. & Michaud, V. & 9 others, Park, C. H., Schubnel, R., Sousa, P., Ravel, R., Rouhi, M., Syerko, E., Umer, R., Vollmer, M. & Yong, A., 20 Nov 2024, In: Composites Part A: Applied Science and Manufacturing. 190.2025, March, 13 p., 108592.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio filler

    Clute, C., Hafner, T., Balasooriya, W., Kaiser, A., Pinter, G. & Schlögl, S., 19 Nov 2024, In: International Journal of Hydrogen Energy. 91.2024, 19 November, p. 404-411 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Advancements in Intelligent Rock Bolt Measurement: A General Approach

    Varelija, M., Vailhe, P. & Hartlieb, P., 15 Nov 2024, Conference proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Analyse und Optimierung von österreichischem Polystyrol-Haushaltsabfall für die Wiederverwendung in Joghurtbecher-Lebensmittelverpackungen

    Krempl, N., Frühwirth, M., Zidar, D., Shahroodi, Z., Holzer, C., Pinter, E., Archodoulaki, M. V., Bichler, L., Jahn, E., Gabriel, V. H. & Aschermayer, F., 13 Nov 2024, VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz. p. 305-312 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    An optimization strategy for customizable global elastic deformation of unit cell-based metamaterials with variable material section discretization

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., 12 Nov 2024, In: Advances in Engineering Software. 199.2025, January, 17 p., 103817.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Recycling of Wintersport Hardgoods - The Challenges of Circularity

    Zidar, D., Krempl, N., Pardametz, V., Bandl, C., Holzer, C., Griesser, T. (Editor) & Ladstätter, E. (Editor), Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. p. 39-47 9 p. (Publication Series Polymer Engineering & Science Leoben; vol. 13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Design of photocurable thiol-epoxy resins for the processing of vitrimers with vat photopolymerisation 3D printing

    Gaca, S., Dietliker, K., Rossegger, E. & Schlögl, S., 30 Oct 2024, In: Reactive and Functional Polymers. 205.2024, December, 9 p., 106085.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured composites

    Stiller, T., Kerschbaumer, R. C., Waly, C., Zink, B., Slapnik, J. & Pinter, G., 30 Oct 2024, In: Results in Engineering. 24.2024, December, 10 p., 103276.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Shrouding Gas Plasma Deposition Technique for Developing Low-Friction, Wear-Resistant WS2-Zn Thin Films on Unfilled PEEK: The Relationship Between Process and Coating Properties

    Kopp, D., Bandl, C., Kaindl, R., Prethaler, T., Coclite, A. M. & Waldhauser, W., 27 Oct 2024, In: Coatings. 14.2024, 11, 18 p., 1365.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Enhancing Recycled Polymers: The Impact of Reused Glass Fiber Composites on Rheological Properties and Processing Performance

    Shahroodi, Z., Krempl, N., Duretek, I. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  40. Published

    Insights Into LAOS Analysis of Liquid Silicone Rubber for Viscosity Determination

    Azevedo, M., Kerschbaumer, R. C. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  41. Published

    Rheological Characterisation of Powder Injection Moulding Feedstocks

    Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  42. Published

    Self-healable epoxy/graphene oxide vitrimers and their recyclable glass fiber reinforced composites

    Sharma, H., Bijalwan, V., Mourad, A. H. I., Kumar, A., Schlögl, S. & Rana, S., 24 Oct 2024, In: Journal of Reinforced Plastics and Composites. ??? Stand: 10. Februar 2025, ??? Stand: 10. Februar 2025, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Challenges and Opportunities in Carbon Fiber-Reinforced Polymer Composites Circularity: A Prospective LCA Case Study

    Miao, Z. C., Kirschnick, U., Chen, H. & Carbajales-Dale, M., 23 Oct 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Efficient surface defect detection in industrial screen printing with minimized labeling effort

    Krassnig, P. J., Haselmann, M., Kremnitzer, M. & Gruber, D. P., 18 Oct 2024, In: Integrated computer-aided engineering. 32.2025, 1, p. 1-21 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

    Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Oct 2024, In: Polymers. 16.2024, 19, 13 p., 2799.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 02: Crosslink density via multi-stage swelling analysis

    Gehling, T., Kerschbaumer, R. C., Pinter, G., Fasching, M. A., Schwarz, T. & Schieppati, J., 26 Sept 2024, In: Polymer. 312.2024, 24 October, 12 p., 127661.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Tuning Surface Properties of Thiol-Ene Polymers for Microfluidic Systems

    Maier, J., Schlögl, S., Griesser, T. & Salehi Siouki, S., 18 Sept 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Sputter deposited silver niobate thin films: Pathway towards phase purity

    Kölbl, L., Kobald, A., Griesser, T., Munnik, F. & Mitterer, C., 15 Sept 2024, In: Thin solid films. 804.2024, 15 September, 9 p., 140505.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Enhance hydrogen storage in lightweight solid-state systems based on Poly (vinylnaphthalene)

    Sharifian, M., Kern, W., Rieß, G. & Kostoglou, N., 10 Sept 2024, In: International Journal of Hydrogen Energy . 87.2024, 18 October, p. 713-721 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Three-dimensional mechanical metamaterial with tunable engineering constants in a broad range

    Fleisch, M., Pinter, G., Schlögl, S. & Berer, M., 5 Sept 2024, In: Results in Engineering. 23.2024, September, 4 p., 102860.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Microscale manipulation of bond exchange reactions in photocurable vitrimers with a covalently attachable photoacid generator

    Korotkov, R., Alabiso, W., Jelinek, A., Schmallegger, M., Li, Y., Schlögl, S. & Rossegger, E., 3 Sept 2024, In: Chemical science. 15.2024, 39, p. 16271-16280 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen

    Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research

  56. Published

    Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials

    Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug 2024, In: Journal of Applied Polymer Science. 141.2024, 41, 15 p., e56074.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Fatigue investigations of elastomers developed for high-pressure hydrogen gas environments

    Schieppati, J., Balasooriya, W., Huber, P. A. H. & Pinter, G., 19 Aug 2024, In: International Journal of Fatigue. 189.2024, December, 10 p., 108563.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber

    Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Jul 2024, In: Measurement. 238.2024, October, 14 p., 115404.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    The Need for Properly Designed Synthesized Micro- and Nanoplastics with Core–Shell Structure

    Galakhova, A., Meisel, T. C. & Rieß, G., 27 Jul 2024, In: Microplastics. 3.2024, 3, p. 433-448 16 p.

    Research output: Contribution to journal › Review article › peer-review

  62. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

    Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Jul 2024, In: Polymers. 16.2024, 14, 20 p., 2033.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    INFLUENCE OF FLUID PROPERTIES ON TRANSVERSE FABRIC COMPRESSIBILITY DURING IN-SITU IMPREGNATION

    Bender, M. & Fauster, E., 5 Jul 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 3 - Material and Structural Behavior – Simulation & Testing. 1 ed. Nantes, Vol. 3. p. 1140 - 1147 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Surface functionalized pyrolytic carbon composites

    Alem, S. A. A., 5 Jul 2024, p. 613. 618 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  66. Published

    Additive Manufacturing of Bone Implants

    Holzer, C., 1 Jul 2024.

    Research output: Contribution to conference › Abstract

  67. Published

    Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

    Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Characterization of atmospheric pressure plasma deposited (APPD) coatings to improve the friction behavior of thermoplastic surfaces

    Gleirscher, M., Kopp, D., Hausberger, A., Angerer, P., Lackner, J. & Schlögl, S., 23 Jun 2024, In: Surface and Coatings Technology. 488.2024, 30 July, 16 p., 131040.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical gloves

    Grabmayer, T., Manhart, J., Fleischmann, D., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 20 Jun 2024, In: Journal of applied polymer science. 141.2024, 24, 12 p., e55498.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Radical-promoted Cationic Photopolymerization with a Trisacylgermane Photoinitiator immobilized on the Surface of Silica Nanoparticles

    Zhang, Z., 17 Jun 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Kontinuierliches Trennen eines Kunststoffgemisches

    Franz, G. (Inventor), Michael, F. (Inventor) & Nadine, W. (Inventor), 15 Jun 2024, IPC No. B29B 17/ 02 A N, Patent No. AT526713, Priority date 29 Nov 2022, Priority No. AT20220050907

    Research output: Patent

  72. E-pub ahead of print

    Reshapable bio-based thiol-ene vitrimers for nanoimprint lithography: Advanced covalent adaptability for tunable surface properties

    Sölle, B., Reisinger, D., Heupl, S., Jelinek, A., Schlögl, S. & Rossegger, E., 8 Jun 2024, (E-pub ahead of print) In: Reactive & functional polymers. 202.2024, September, 8 p., 105972.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Near-infrared spectroscopy in resin transfer molding—determination of the degree of cure

    Salzmann, M., Märzinger, W., Teuchtmann, M., Ravindran, B., Kirschnick, U. & Fauster, E., Jun 2024, In: International Journal of Advanced Manufacturing Technology. 132.2024, 11-12, p. 5557-5565 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Probing local adhesion: A miniaturized multi-photon lithography design demonstrated on silanized vs. untreated surfaces

    Jelinek, A., Rossegger, E., Schlögl, S., Kiener, D. & Alfreider, M., Jun 2024, In: Materials and Design. 242.2024, June, 13 p., 112994.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  77. Published

    Compaction behaviour of textile reinforcements

    Bender, M., 23 May 2024.

    Research output: Contribution to conference › Poster › Transfer

  78. Published

    Recycling of Paper Machine Clothing: ReFibreValue

    Duretek, I., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  79. Published

    Additive Manufacturing Material Extrusion @ Institute of Polymer Processing: Alf³

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  80. Published

    Additive Manufacturing of Aluminium by Material Extrusion MEX

    Momeni, V., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  81. Published

    Chemitecture: Dielectric Elastomer Actuator (DEA) produced by Material Extrusion (MEX)

    Raguz, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  82. Published

    Closing the circle of polyolefin packaging: Pack2Loop

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  83. Published

    E-Beam Treatment of Post Consumer Polymer Waste: Increasing the melt viscosity of post-consumer polypropylene

    Krämer, J., 22 May 2024.

    Research output: Contribution to conference › Poster › Research

  84. Published

    Extrusion and Additive Manufacturing@ Institute of Polymer Processing

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  85. Published

    LightCycle: Upcycling of regenerates with a new Injection Moulding Compounder (IMC)

    Shahroodi, Z., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  86. Published

    Material Data Determination @ Institute of Polymer Processing

    Duretek, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  87. Published

    Recycling Biobased Plastics: C-PlaNet

    Main, P., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  88. Published

    Wintersport Ressource Efficiency and Improved Circular Economy: WINTRUST

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  89. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  90. E-pub ahead of print

    Magnetospheric Venus Space Explorers (MVSE) mission: A proposal for understanding the dynamics of induced magnetospheres

    Albers, R., Andrews, H., Boccacci, G., Castro Pires, V. D., Laddha, S., Lundén, V., Maraqten, N., Matias, J., Krämer, E., Schulz, L., Palanca, I. T., Teubenbacher, D., Baskevitch, C., Covella, F., Cressa, L., Moreno, J. G., Gillmayr, J., Hollowood, J., Huber, K. & Kutnohorsky, V. & 10 others, Lennerstrand, S., Malatinszky, A., Manzini, D., Maurer, M., Nidelea, D. M. A., Rigon, L., Sinjan, J., Suarez, C., Viviano, M. & Knutsen, E. W., 19 May 2024, (E-pub ahead of print) In: Acta astronautica. 221.2024, August, p. 194-205 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  92. Published

    Unlocking the Potential of Recycled Polypropylene in Food Packaging

    Krempl, N., Holzer, C., Pinter, E., Frühwirth, M., Shahroodi, Z., Jahn, E., Aschermayer, F. & Gabriel, V. H., 19 May 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  93. Published

    Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

    Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 May 2024, In: Journal of applied polymer science. 141.2024, 30, 14 p., e55694.

    Research output: Contribution to journal › Article › Research › peer-review

  94. E-pub ahead of print

    Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniques

    Krämer, J., Guedes de la Cruz, G. D. C., Kern, W., Roitner, J., Witschnigg, A., Rittmannsberger, F. & Schnetzinger, K., 14 May 2024, (E-pub ahead of print) In: Radiation physics and chemistry. 222.2024, September, 6 p., 111846.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  96. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  97. E-pub ahead of print

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 May 2024, (E-pub ahead of print) In: Polymer Testing. 134.2024, May, 13 p., 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  98. E-pub ahead of print

    Cationic UV-curing of bio-based epoxidized castor oil vitrimers with electrically conductive properties

    Bergoglio, M., Palazzo, G., Reisinger, D., Porcarello, M., Kortaberria, G., Schlögl, S. & Sangermano, M., 5 May 2024, (E-pub ahead of print) In: Reactive & functional polymers. 200.2024, July, 9 p., 105936.

    Research output: Contribution to journal › Article › Research › peer-review

  99. E-pub ahead of print

    Laser-induced graphene formation on different wood species: Dependence of electronic performance on intrinsic features of certain types of wood

    Lengger, S. K., Neumaier, L., Haiden, L., Feuchter, M., Griesser, T. & Kosel, J., 4 May 2024, (E-pub ahead of print) In: Sustainable Materials and Technologies. 40.2024, July, 11 p., e00936.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Evaluation of existing and introduction of new incremental crack propagation approaches in FEM

    Pletz, M., Frankl, S. M. & Schuecker, C., 3 May 2024, In: Theoretical and Applied Fracture Mechanics. 131.2024, June, 11 p., 104452.

    Research output: Contribution to journal › Article › Research › peer-review

  101. E-pub ahead of print

    Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids

    Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M. & Schlögl, S., 2 May 2024, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 9 p., 2400011.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Effect of Flashlamp Heating System Parameters on the Wedge Peel Strength of Thermoplastic Carbon Fiber Tape in the Automated Tape Placement Process

    Legenstein, A. & Fauster, E., 29 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 3, 17 p., 91.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...42 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301