Department Materials Science

Organisational unit: Departments and Institutes

701 - 750 out of 5,456Page size: 50

Research output

  1. 2022
  2. Published

    Polycrystal diffraction elastic constants of advanced γ-TiAl based sheets

    Obersteiner, D., Staron, P., Maawad, E., Ambig, A., Hatzenbichler, L., Holec, D. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Prediciting Phase Stability of TiAl-based High Entropy Alloys from First-Principles

    Hatzenbichler, L., 2022

    Research output: Thesis › Master's Thesis

  4. Published

    Probing local atomic strain of metallic glasses with nanometer resolution using TEM diffraction mapping

    Keckes, J., 2022

    Research output: Thesis › Master's Thesis

  5. Published

    Qualification Process of 3D Printed High-Performance Polymer Parts, for Lam Wet Clean Applications

    Glanznig, A. R., 2022

    Research output: Thesis › Master's Thesis

  6. Published

    Stability of Retained Austenite in a Bainitic Low Alloyed Steel and its Response to Mechanical and Thermal Loading

    Pfleger-Schopf, B., 2022

    Research output: Thesis › Doctoral Thesis

  7. Published

    Stereolithographic 3D printing of ceramics: challenges and opportunities for structural integrity

    Lube, T., Staudacher, M., Hofer, A.-K., Schlacher, J. & Bermejo Moratinos, R., 2022, In: Advanced engineering materials. 2200520.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Study of the phase transformation behavior of a γ-TiAl based alloy during an adapted spark plasma sintering process

    Musi, M., Galy, B., Monchoux, J.-P., Couret, A., Clemens, H. & Spörk-Erdely, P., 2022.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Substitution von Silizium durch Aluminium in High Ductility-Stählen

    Schrems, S., 2022

    Research output: Thesis › Master's Thesis

  10. Published

    Synthesis and characterization of B1-AlN containing superlattice structures

    Becker, M.-T., 2022

    Research output: Thesis › Master's Thesis

  11. Published

    The micromechanical characterization of silicon up to 950

    Schaffar, G. J. K., Tscharnuter, D., Imrich, P. J. & Maier-Kiener, V., 2022.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Thermally Stable Nanotwins: New Heights for Cu Mechanics

    Edwards, T. E. J., Rohbeck, N., Huzár, E., Keith, T., Putz, B., Polyakov, M. N., Maeder, X., Pethö, L. & Michler, J., 2022, In: Advanced science. 2203544.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Thermal stability and structural evolution of a modified 2XXX alloy for an engine component application

    Donau, M., 2022

    Research output: Thesis › Master's Thesis

  14. Published

    Thermo-mechanical fatigue of metallizations in microelectronic applications

    Moser, S., 2022

    Research output: Thesis › Doctoral Thesis

  15. Published

    TiN/CrN , TiSiN/CrN and NbN/CrN multilayer coatings deposited in an industrial scale HiPIMS system

    Sala Bascompte, N., Rebelo de Figueiredo, M., Franz, R., Kainz, C., Colominas, C. & Abad, M. D., 2022.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Titanium base alloys for laser powder bed fusion

    Fleißner-Rieger, C., 2022

    Research output: Thesis › Doctoral Thesis

  17. Published

    Tuning the microstructure of MoNbTaWZr high entropy alloy films by adjusting the HiPIMS parameters

    Gruber, G., Lassnig, A., Žák, S., Gammer, C., Cordill, M. J. & Franz, R., 2022.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Understanding and controlling inversion boundaries in ZnO

    Scheiber, D., Popov, M. N., Supancic, P. & Spitaler, J., 2022, In: Acta materialia. 229, 117804.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Untersuchung des Einflusses zyklisch - thermischer Belastung auf die Härte und Mikrostruktur von Kunststoffformenstählen

    Pock, A., 2022

    Research output: Thesis › Master's Thesis

  20. Published

    Varistor Grain Boundary Characterization by High Resolution Analytics

    Byloff, J., 2022

    Research output: Thesis › Master's Thesis

  21. Published

    ZrN-based hard coatings deposited by chemical and physical vapor deposition

    Frank, F., 2022

    Research output: Thesis › Doctoral Thesis

  22. 2021
  23. Published

    The influence of bias voltage on structure, thermal stability and mechanical properties of arc evaporated Cr0.69Ta0.20B0.11N coatings

    Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 25 Dec 2021, In: Surface & coatings technology. 428.2021, 25 December, 8 p., 127867.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Soft Magnetic Properties of Ultra-Strong and Nanocrystalline Pearlitic Wires

    Wurster, S., Stückler, M., Weissitsch, L., Krenn, H., Hohenwarter, A., Pippan, R. & Bachmaier, A., 22 Dec 2021, In: Nanomaterials. 12.2022, 1, 11 p., 23.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Iron-rich talc as air-stable platform for magnetic two-dimensional materials

    Matkovic, A., Ludescher, L., Peil, O. E., Sharma, A., Gradwohl, K.-P., Kratzer, M., Zimmermann, M., Genser, J., Fisslthaler, E., Knez, D., Gammer, C., Lugstein, A., Bakker, R. J., Romaner, L., Zahn, D. R. T., Hofer, F., Salvan, G., Raith, J. & Teichert, C., 21 Dec 2021, (E-pub ahead of print) In: npj 2D materials and applications. 2021, 5, 9 p., 94.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted y-TiAl based alloy

    Wimler, D., Käsznar, K., Musi, M., Breuning, C., Markl, M., Keckes, J., Clemens, H., Körner, C. & Mayer, S., 15 Dec 2021, In: Materials and Design. 212.2021, 15 December, 13 p., 110187.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of the deposition parameters on the nanolamella periodicity of chemical vapor deposited Ti1-xAlxN

    Saringer, C., Tkadletz, M., Thurner, J., Czettl, C. & Schalk, N., 15 Dec 2021, In: Materials letters. 305.2021, 15 December, 4 p., 130819.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A Perspective to Control Laser-Induced Periodic Surface Structure Formation at Glancing-Incident Femtosecond Laser-Processed Surfaces

    Jelinek, A., Pfeifenberger, M. J., Pippan, R. & Kiener, D., Dec 2021, In: JOM. 73, 12, p. 4248–4257 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Effect of cold rolling on the pressure coefficient of glass transition temperature in bulk metallic glasses

    Jana, P. P., Eckert, J. & Das, J., Dec 2021, In: Thermochimica Acta. 706.2021, December, 8 p., 179071.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Effects of tungsten alloying and fluorination on the oxidation behavior of intermetallic titanium aluminides for aerospace applications

    Donchev, A., Mengis, L., Couret, A., Mayer, S., Clemens, H. & Galetz, M., Dec 2021, In: Intermetallics. 139.2021, December, 14 p., 107270.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Grain boundary segregation in Ni-base alloys: A combined atom probe tomography and first principles study

    Ebner, A., Jakob, S., Clemens, H., Pippan, R., Maier-Kiener, V., He, S., Ecker, W., Scheiber, D. & Razumovskiy, V. I., Dec 2021, In: Acta materialia. 221.2021, December, 10 p., 117354.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Impact of the segregation energy spectrum on the enthalpy and entropy of segregation

    Scheiber, D. & Romaner, L., Dec 2021, In: Acta materialia. 221.2021, December, 8 p., 117393.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action

    Wartbichler, R., Clemens, H., Mayer, S., Ghibaudo, C., Rizza, G., Galati, M., Iuliano, L., Biamino, S. & Ugues, D., Dec 2021, In: Advanced engineering materials. 23.2021, 12, 22 p., 2101199.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    On the impact of post weld heat treatment on the microstructure and mechanical properties of creep resistant 2.25Cr–1Mo–0.25V weld metal

    Schönmaier, H., Fleißner-Rieger, C., Krein, R., Schmitz-Niederau, M. & Schnitzer, R., Dec 2021, In: Journal of materials science. 56.2021, 36, p. 20208-20223 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Quasi-static and dynamic fracture toughness of a γ-TiAl alloy: Measurement techniques, fractography and interpretation

    Lintner, A., Pippan, R., Schloffer, M. & Hohenwarter, A., Dec 2021, In: Engineering Fracture Mechanics. 258.2021, December, 14 p., 108081.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Structural stability and mechanical properties of TiAl+Mo alloys: A comprehensive ab initio study

    Abdoshahi, N., Dehghani, M., Hatzenbichler, L., Spörk-Erdely, P., Ruban, A. V., Musi, M., Mayer, S., Spitaler, J. & Holec, D., Dec 2021, In: Acta materialia. 221.2021, December, 14 p., 117427.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Transition metal-based high entropy alloy microfiber electrodes: Corrosion behavior and hydrogen activity

    Sarac, B., Zadorozhnyy, V., Ivanov, Y. P., Spieckermann, F., Klyamkin, S., Berdonosova, E., Serov, M., Kaloshkin, S., Greer, A. L., Sarac, A. S. & Eckert, J., Dec 2021, In: Corrosion science. 193.2021, December, 10 p., 109880.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Stainless steel reveals an anomaly in thermal expansion behavior of severely deformed materials

    Renk, O., Enzinger, R. J., Gammer, C., Scheiber, D., Oberdorfer, B., Tkadletz, M., Stark, A., Sprengel, W., Pippan, R., Eckert, J., Romaner, L. & Ruban, A., 30 Nov 2021, In: Physical review materials . 5.2021, 11, 113609.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Enhancing contact damage tolerance through layered design and textured microstructure

    Jabr, A., Schlacher, J. C. (Co-editor) & Bermejo Moratinos, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  41. Published

    Micro-scale fracture toughness of textured alumina grains and grain boundaries

    Schlacher, J. C., Csanádi, T. (Co-editor), Vojtko, M. (Co-editor), Papšík, R. (Co-editor) & Bermejo Moratinos, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Modelling of edge and tunnelling cracks initiation in ceramic laminates using the stress-energy criterion

    Papšík, R., Ševeček, O. (Co-editor), Hofer, A.-K. (Co-editor), Kraleva, I. (Co-editor) & Bermejo, R. (Co-editor), 23 Nov 2021.

    Research output: Contribution to conference › Poster › Research

  43. E-pub ahead of print

    Role of effective strain on the deformability of brittle Hf-based bulk metallic glass

    Kim, S. Y., Park, E. S., Eckert, J. & Lee, M. H., 20 Nov 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 15.2021, November-December, p. 6713-6720 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    The transverse and longitudinal elastic constants of pulp fibers in paper sheets

    Czibula, C., Brandberg, A., Cordill, M. J., Matković, A., Glushko, O., Czibula, C., Kulachenko, A., Teichert, C. & Hirn, U., 17 Nov 2021, In: Scientific reports (e-only). 2021, 11, 22411.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloy

    Klein, T., Graf, G., Staron, P., Stark, A., Clemens, H. & Spörk-Erdely, P., 15 Nov 2021, In: Materials letters. 303.2021, 15 November, 4 p., 130500.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Mechanical Behavior and In Vitro Corrosion of Cubic Scaffolds of Pure Magnesium Processed by Severe Plastic Deformation

    Silva, C. L. P., Camara, M. A., Hohenwarter, A. & Figueiredo, R. B., 8 Nov 2021, In: Metals. 11.2021, 11, 11 p., 1791.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fracture properties of α– and k–Al2O3 hard coatings deposited by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Czettl, C. & Schalk, N., 4 Nov 2021, In: Coatings. 11.2021, 11, 10 p., 1359.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    High-Temperature Nanoindentation of an Advanced Nano-Crystalline W/Cu Composite

    Burtscher, M., Zhao, M., Kappacher, J., Leitner, A., Wurmshuber, M., Pfeifenberger, M. J., Maier-Kiener, V. & Kiener, D., 3 Nov 2021, In: Nanomaterials. 11, 11, 14 p., 2951.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Rate-depending plastic deformation behaviour in a nickel-base alloy under hydrogen influence

    Ebner, A., Plesiutschnig, E., Clemens, H., Pippan, R. & Maier-Kiener, V., 3 Nov 2021, In: International Journal of Hydrogen Energy . 46.2021, 76, p. 38132-38143 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    High-speed nanoindentation mapping of organic matter-rich rocks: A critical evaluation by correlative imaging and machine learning data analysis

    Vranjes-Wessely, S., Misch, D., Kiener, D., Cordill, M. J., Frese, N., Beyer, A., Horsfield, B., Wang, C. & Sachsenhofer, R. F., 1 Nov 2021, In: International journal of coal geology. 247.2021, 1 November, 19 p., 103847.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5Mg-1Si Alloy Manufactured by Selective Laser Melting

    Wang, P., Lei, Y., Qi, J. F., Yu, S.-J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov 2021, In: Materials. 14.2021, 22, 11 p., 7048.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Anisotropic wet-chemical etching for preparation of freestanding films on Si substrates for atom probe tomography: A simple yet effective approach

    Tkadletz, M., Lechner, A., Pölzl, S. & Schalk, N., Nov 2021, In: Ultramicroscopy. 230, 113402, p. 1-4 113402.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...11 12 13 14 15 16 17 18 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben