Department Materials Science

Organisational unit: Departments and Institutes

1401 - 1500 out of 5,456Page size: 100

Research output

  1. 2018
  2. Published

    An ab initio study of thermodynamic and mechanical stability of heusler-based Fe2AlCo polymorphs

    Friák, M., Oweisová, S., Pavlu, J., Holec, D. & Šob, M., 27 Aug 2018, In: Materials. 11.2018, 9, 12 p., 1543.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Metallic glass nanolaminates with shape memory alloys

    Şopu, D., Albe, K. & Eckert, J., 22 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 159.2018, 15. October, p. 344-351 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Influence of inhomogeneity on several length scales on the local mechanical properties in V-alloyed all-weld metal

    Haslberger, P., Ernst, W., Schneider, C., Holly, S. & Schnitzer, R., 13 Aug 2018, In: Welding in the world. 62.2018, 6, p. 1153-1158 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Microstructure and mechanical properties of a low C steel subjected to bainitic of quenching and partitioning heat treatments

    Ebner, S., Suppan, H., Schnitzer, R. & Hofer, C., 10 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Linking Macroscopic Fracture Properties to Single Dislocation Processes

    Issa, I., Alfreider, M., Kozic, D., Kolednik, O., Sandfeld, S. & Kiener, D., Aug 2018, In: Microscopy and microanalysis. 24.2018, Supplement S1, p. 2184-2185 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Nanoindentation study of macerals in coals from the Ukrainian Donets Basin

    Vranjes-Wessely, S., Misch, D., Schöberl, T., Kiener, D., Groß, D. & Sachsenhofer, R., Aug 2018, In: Advances in Geosciences. 2018, 45

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 27 Jul 2018, (E-pub ahead of print) In: Acta materialia. 158.2018, 1 October, p. 193-205 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Theory-guided metal-decoration of nanoporous carbon for hydrogen storage applications

    Holec, D., Kostoglou, N., Tampaxis, C., Babic, B., Mitterer, C. & Rebholz, C., 26 Jul 2018, (E-pub ahead of print) In: Surface & coatings technology. 351.2018, 15 October, p. 42-49 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Grain boundary segregation engineering in as-sintered molybdenum for improved ductility

    Leitner, K., Lutz, D., Knabl, W., Eidenberger-Schober, M., Huber, K., Lorich, A., Clemens, H. & Maier-Kiener, V., 20 Jul 2018, In: Scripta materialia. 156.2018, November, p. 60-63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates

    Wang, Y., Kiener, D., Liang, X., Bian, J., Wu, K., Zhang, J., Liu, G. & Sun, J., 19 Jul 2018, In: Journal of alloys and compounds. 768.2018, 5 November, p. 88-96 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

    Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H., 18 Jul 2018, (E-pub ahead of print) In: Acta Materialia. 158.2018, 1 October, p. 407-421 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium

    Pilz, S., Gebert, A., Voss, A., Oswald, S., Göttlicher, M., Hempel, U., Eckert, J., Rohnke, M., Janek, J. & Calin, M., 1 Jul 2018, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106.2018, 5, p. 1686-1697 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

    Leguillon, D., Martin, E., Sevecek, O. & Bermejo, R., 1 Jul 2018, In: International Journal of Fracture. 212, 1, p. 89-103 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. E-pub ahead of print

    Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion

    Lassnig, A., Nakamura, N., Jörg, T., Reeja-Jayan, B. & Cordill, M., 28 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, 15 September, p. 963-968 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses

    Geng, G., Yan, Z., Hu, Y., Wang, Z., Ketov, S. V. & Eckert, J., 22 Jun 2018, In: Journal of Materials Research. 33.2018, 18, p. 2775-2783 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC

    Liu, X. Q., Li, C. J., Yi, J. H., Prashanth, K. G., Chawake, N., Tao, J. M., You, X., Liu, Y. C. & Eckert, J., 19 Jun 2018, In: Journal of alloys and compounds. 765.2018, 15 October, p. 98-105 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Ab initio inspired design of ternary boride thin films

    Moraes, V., Riedl, H., Fuger, C., Polcik, P., Bolvardi, H., Holec, D. & Mayrhofer, P. H., 18 Jun 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, p. 1-9 9 p., 9288.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Atomic scale investigations of thermally treated nano-structured Ti-Al-N/Mo-Si-B multilayers

    Aschauer, E., Sackl, S. C., Schachinger, T., Bolvardi, H., Arndt, M., Polcik, P., Riedl, H. & Mayrhofer, P. H., 18 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, September, p. 480-487 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Improved fracture behavior and mechanical properties of alumina textured ceramics

    Zhang, M., Chang, Y., Bermejo, R., Jiang, G., Sun, Y., Wu, J., Yang, B. & Cao, W., 15 Jun 2018, In: Materials letters. 221, p. 252-255 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Crack Initiation of Printed Lines Predicted with Digital Image Correlation

    Katsarelis, C., Glushko, O., Tonkin, C., Kennedy, M. S. & Cordill, M., 13 Jun 2018, In: JOM. 70.2018, 9, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability

    Taghvaei, A. H., Shirazifard, N. G., Ramasamy, P., Bednarčik, J. & Eckert, J., 5 Jun 2018, In: Journal of alloys and compounds. 748.2018, June, p. 553-560 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Fast Calorimetry of Mg65-Cu25-Gd10

    Spieckermann, F., Rosenthal, M., Steffny, I., Bian, X. L., Ketov, S. V., Löffler, J. F., Stoica, M. & Eckert, J., Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Universally scaling Hall-Petch-like relationship in metallic glass matrix composites

    Liu, Y. Y., Liu, P. Z., Li, J. J., Liaw, P. K., Spieckermann, F., Kiener, D., Qiao, J. W. & Eckert, J., Jun 2018, In: International journal of plasticity. 105.2018, June, p. 225-238 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics

    Maity, T., Prashanth, K. G., Balci, Ö., Kim, J. T., Schöberl, T., Wang, Z. & Eckert, J., 31 May 2018, (E-pub ahead of print) In: International journal of plasticity. 109.2018, October, p. 121-136 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. E-pub ahead of print

    Scratch induced thin film buckling for quantitative adhesion measurements

    Kleinbichler, A., Pfeifenberger, M. J., Zechner, J., Wöhlert, S. & Cordill, M., 29 May 2018, (E-pub ahead of print) In: Materials and Design. 115.2018, 5 October, p. 203-211 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Understanding the effect of surface flaws on the strength distribution of brittle single crystals

    Gruber, M., Leitner, A., Kraleva, I. R., Kiener, D., Supancic, P. H. & Bermejo, R., 28 May 2018, In: Journal of the American Ceramic Society. 101, p. 5705–5716

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Plastic deformation mechanisms in severely strained eutectic high entropy composites explained via strain rate sensitivity and activation volume

    Maity, T., Prashanth, K. G., Balçi, Ö., Wang, Z., Jia, Y. D. & Eckert, J., 25 May 2018, (E-pub ahead of print) In: Composites Part B: Engineering. 150.2018, 1 October, p. 7-13 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation

    Leitner, A., Maier-Kiener, V. & Kiener, D., 24 May 2018, In: Nanomaterials. 8.2018, 6, p. 1-12 12 p., 366.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Effect of boron addition on thermal and mechanical properties of Co-Cr-Mo-C-(B) glass-forming alloys

    Kim, J. T., Hong, S. H., Bian, X., Gokuldoss, P. K., Song, K., Eckert, J., Park, J. M. & Kim, K. B., 17 May 2018, In: Intermetallics. 99.2018, August, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Atomistic origins of the differences in anisotropic fracture behaviour of LiTaO3 and LiNbO3 single crystals

    Gruber, M., Konetschnik, R., Popov, M., Spitaler, J., Supancic, P. H., Kiener, D. & Bermejo, R., 15 May 2018, In: Acta Materialia. 150, p. 373-380 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

    Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Effect of processing temperature on the microstructural characteristics of Cu-Ag nanocomposites: From supersaturation to complete phase decomposition

    Kormout, K. S., Ghosh, P., Bachmaier, A., Hohenwarter, A. & Pippan, R., 8 May 2018, In: Acta Materialia. 154.2018, 1 August, p. 33-44 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Electrosorption of Hydrogen in Pd-Based Metallic Glass Nanofilms

    Sarac, B., Karazehir, T., Mühlbacher, M., Kaynak, B., Gammer, C., Schöberl, T., Sarac, A. S. & Eckert, J., 1 May 2018, In: ACS Applied Energy Materials. 1.2018, 6, p. 2630-2646 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Influence of Annealing on Microstructure and Mechanical Properties of a Nanocrystalline CrCoNi Medium-Entropy Alloy

    Schuh, B., Völker, B., Todt, J., Kormout, K. S., Schell, N. & Hohenwarter, A., 24 Apr 2018, In: Materials. 11.2019, 5, 18 p., 662.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Mechanical Behavior at the Nanoscale: What’s in your Toolbox?

    Cordill, M. & Weinberger, C. R., 19 Apr 2018, In: JOM. 70.2018, 7, p. 1065-1067 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Unzerstörbares Material: Krone der Wissenschaft

    Kiener, D., 17 Apr 2018, In: Kronen-Zeitung. p. 34

    Research output: Contribution to journal › Article › Transfer

  41. Published

    A heat treatable TiB2/Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

    Wang, P., Gammer, C., Brenne, F., Niendorf, T., Eckert, J. & Scudino, S., 10 Apr 2018, In: Composites Part B: Engineering. 147.2018, 15 August, p. 162-168 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Graphite under compression: shift of layer breathing and shear modes frequencies with interlayer spacing

    Sun, Y. W., Holec, D., Xu, Y. & Dunstan, D. J., 3 Apr 2018, In: Journal of Physics Communications. 2018, 2, p. 2-7 6 p., 045004.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Precipitates in microalloyed ultra-high strength weld metal studied by atom probe tomography

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 3 Apr 2018, In: Welding in the world. 62.2018, June, p. 713-719 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Inkjet Printed Wiring Boards with Vertical Interconnect Access on Flexible, Fully Compostable Cellulose Substrates

    Samusjew, A., Lassnig, A., Cordill, M. J., Krawczyk, K. & Grießer, T., 1 Apr 2018, In: Advanced Materials Technologies. 3, 4, 1700250.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Moderne Methoden zur mikroskopischen Charakterisierung von ZnO Varistor-Korngrenzen

    Raidl, N., Sartory, B., Supancic, P. & Danzer, R., 1 Apr 2018, In: Praktische Metallographie/Practical Metallography. 55, 4, p. 192-202 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Micromechanical properties of macerals in coals from the Ukrainian Donets Basin: maturity trends and implications for unconventional hydrocarbon production

    Vranjes, S., Schöberl, T., Misch, D., Kiener, D. & Sachsenhofer, R., Apr 2018.

    Research output: Contribution to conference › Abstract › peer-review

  49. Published

    Dual self-organised shear banding behaviours and enhanced ductility in phase separating Zr-based bulk metallic glasses

    Zhang, Z. Q., Song, K. K., Sun, B. A., Wang, L., Cui, W. C., Qin, Y. S., Han, X. L., Xue, Q. S., Peng, C. X., Sarac, B., Spieckermann, F., Kaban, I. & Eckert, J., 29 Mar 2018, In: Philosophical magazine. 98.2018, 19, p. 1744-1764 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing

    Alfreider, M., Kozic, D., Kolednik, O. & Kiener, D., 27 Mar 2018, (E-pub ahead of print) In: Materials and Design. 148.2018, 15 June, p. 177-187 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Interfacial mutations in the Al-polyimide system

    Putz, B., Milassin, G., Butenko, Y., Völker, B., Gammer, C., Semprimoschnig, C. & Cordill, M., 22 Mar 2018, In: Surface and interface analysis. 50.2018, 5, p. 579-586 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

    Sun, H., Song, K., Han, X., Xing, H., Li, X., Wang, S., Kim, J., Chawake, N., Maity, T., Wang, L. & Eckert, J., 20 Mar 2018, In: Metals : open access journal . 8.2018, 3, p. 196 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films

    Riedl, H., Glechner, T., Wojcik, T., Koutná, N., Kolozsvári, S., Paneta, V., Holec, D., Primetzhofer, D. & Mayrhofer, P. H., 9 Mar 2018, In: Scripta materialia. 149.2018, May, p. 150-154 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 9 Mar 2018, (E-pub ahead of print) In: Scripta materialia. 149.2018, May, p. 70-74 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. E-pub ahead of print

    Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

    Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 Mar 2018, (E-pub ahead of print) In: Materials Science and Engineering A. 723.2018, 18 April, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    A new device for high-temperature in situ GISAXS measurements

    Fritz-Popovski, G., Bodner, S. C., Sosada-Ludwikowska, F., Maier, G. A., Morak, R., Chitu, L., Bruegemann, L., Lange, J., Krane, H. G. & Paris, O., 5 Mar 2018, In: Review of scientific instruments. 89.2018, 3, 035103.

    Research output: Contribution to journal › Article › Research › peer-review

  58. E-pub ahead of print

    An investigation on shear banding and crystallographic texture of Ag–Cu alloys deformed by high-pressure torsion

    Ghosh, P., Kormout, K. S., Todt, J., Lienert, U., Keckes, J. & Pippan, R., 2 Mar 2018, (E-pub ahead of print) In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233.2018, 3, p. 794-806 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Effects of new beta-type Ti-40Nb implant materials, brain-derived neurotrophic factor, acetylcholine and nicotine on human mesenchymal stem cells of osteoporotic and non osteoporotic donors

    Kauschke, V., Gebert, A., Calin, M., Eckert, J., Scheich, S., Heiss, C. & Lips, K. S., 28 Feb 2018, In: PLOS ONE. 13.2018, 2, 17 p., e0193468.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    An ab initio study of mechanical and dynamical stability of MoSi2

    Friák, M., Holec, D. & Šob, M., 19 Feb 2018, In: Journal of alloys and compounds. 746.2018, 25 May, p. 720-728 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed

    Salman, O., Funk, A., Waske, A., Eckert, J. & Scudino, S., 15 Feb 2018, In: Technologies. 6.2018, 25, 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Anisotropy in local microstructure – Does it affect the tensile properties of the SLM samples?

    Maity, T., Chawake, N., Kim, J. T., Eckert, J. & Prashanth, K. G., 15 Feb 2018, In: Manufacturing Letters. 15.2018 Part A, January, p. 33-37 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Development of high-strength welding consumables using calculations and microstructural characterisation

    Holly, S., Haslberger, P., Zügner, D., Schnitzer, R. & Kozeschnik, E., 14 Feb 2018, In: Welding in the world. 62.2018, 3, p. 451-458 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Stability and elasticity of metastable solid solutiions and superlattices in the MoN-TaN system: First-principles calculations

    Koutná, N., Holec, D., Friák, M., Mayrhofer, P. H. & Šob, M., 14 Feb 2018, In: Materials and Design. 144.2018, April, p. 310-322 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Local-structure change rendered by electronic localization-delocalization transition in cerium-based metallic glasses

    Luo, Q., Schwarz, B., Swarbrick, J. C., Bednarčik, J., Zhu, Y., Tang, M., Zheng, L., Li, R., Shen, J. & Eckert, J., 12 Feb 2018, In: Physical Review B. 97.2018, 6, 7 p., 064104.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Amorphous martensite in β-Ti alloys

    Zhang, L., Zhang, H., Ren, X., Eckert, J., Wang, Y., Zhu, Z., Gemming, T. & Pauly, S., 6 Feb 2018, In: Nature Communications. 9.2018, 1, 8 p., 506.

    Research output: Contribution to journal › Article › Research › peer-review

  67. E-pub ahead of print

    Waste management and attitudes towards cleanliness in medieval central Europe

    Havlíček, F., Pokorná, A. & Zálešák, J., 6 Feb 2018, (E-pub ahead of print) In: Journal of landscape ecology. 10.2017, 3, p. 266-287 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 5 Feb 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 270-276 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures

    Wang, P., Deng, L., Prashanth, K. G., Pauly, S., Eckert, J. & Scudino, S., 1 Feb 2018, In: Journal of alloys and compounds. 735.2018, February, p. 2263-2266 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Microstructures, Martensitic Transformation, and Mechanical Behavior of Rapidly Solidified Ti-Ni-Hf and Ti-Ni-Si Shape Memory Alloys

    Han, X. L., Song, K. K., Zhang, L. M., Xing, H., Sarac, B., Spieckermann, F., Maity, T., Muehlbacher, M., Wang, L., Kaban, I. & Eckert, J., 1 Feb 2018, In: Journal of Materials Engineering and Performance. 27.2018, 3, p. 1005-1015 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. E-pub ahead of print

    Thermally-triggered Dual In-situ Self-healing Metallic Materials

    Kim, J. T., Kim, H. J., Hong, S. H., Park, H. J., Kim, Y. S., Hwang, Y. J., Jeong, Y. B., Park, J. Y., Park, J. M., Sarac, B., Wang, W. M., Eckert, J. & Kim, K. B., 1 Feb 2018, (E-pub ahead of print) In: Scientific reports (e-only). 8.2018, 1, 10 p., 2120.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Microstructure and mechanical properties of high-strength steel welding consumables with a minimum yield strength of 1100 MPa

    Haslberger, P., Holly, S., Ernst, W. & Schnitzer, R., 24 Jan 2018, In: Journal of materials science. 53.2018, May, p. 6968-6979 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Optimizing mechanical properties of Fe 26.7 Co 26.7 Ni 26.7 Si 8.9 B 11 high entropy alloy by inducing hypoeutectic to quasi-duplex microstructural transition

    Zhang, Z., Song, K. K., Guo, S., Xue, Q. S., Xing, H., Cao, C. D., Dai, F. P., Völker, B., Hohenwarter, A., Maity, T., Chawake, N., Kim, J. T., Wang, L., Kaban, I. & Eckert, J., 23 Jan 2018, In: Scientific reports (e-only). 9.2019, 360, 14 p., 360.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Bulk metallic dual phase glasses by severe plastic deformation

    Krämer, L., Champion, Y., Kormout, K. S., Maier-Kiener, V. & Pippan, R., 12 Jan 2018, In: Intermetallics. 94.2018, March, p. 172-178 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Influence of Nb on the microstructure and fracture toughness of (Zr0.76Fe0.24)100-xNbx nano-eutectic composites

    Maity, T., Dutta, A., Jana, P. P., Prashanth, K. G., Eckert, J. & Das, J., 11 Jan 2018, In: Materials. 11.2018, 1, 9 p., 113.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Reconstruction of the domain orientation distribution function of polycrystalline PZT ceramics using vector piezoresponse force microscopy

    Kratzer, M., Lasnik, M., Röhrig, S., Teichert, C. & Deluca, M., 11 Jan 2018, In: Scientific reports (London : Nature Publishing Group). 8

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting

    Wang, P., Gammer, C., Brenne, F., Prashanth, K. G., Mendes, R. G., Rümmeli, M. H., Gemming, T., Eckert, J. & Scudino, S., 10 Jan 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 711.2018, January, p. 562-570 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    How grain boundary chemistry controls the fracture mode of molybdenum

    Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Electrically reversible cracks in an intermetallic film controlled by an electric field

    Liu, Z. Q., Liu, J. H., Biegalski, M. D., Hu, J.-M., Shang, S. L., Ji, Y., Wang, J. M., Hsu, S. L., Wong, A. T., Cordill, M., Gludovatz, B., Marker, C., Yan, H., Feng, Z. X., You, L., Lin, M. W., Ward, T. Z., Liu, Z. K., Jiang, C. B. & Chen, L. Q. & 3 others, Ritchie, R. O., Christen, H. M. & Ramesh, R., 3 Jan 2018, In: Nature Communications. 41.2018, 9, 7 p., 9.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Nanoindentation creep behavior of Cu–Zr metallic glass films

    Wang, Y., Zhang, J., Wu, K., Liu, G., Kiener, D. & Sun, J., 2 Jan 2018, In: Materials Research Letters [Elektronische Ressource]. 6.2018, 1, p. 22-28 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    MnFePSi-Based Magnetocaloric Packed Bed Regenerators: Structural Details Probed by X-Ray Tomography: Structural details probed by X-ray tomography

    Funk, A., Zeilinger, M., Miehe, A., Sopu, D., Eckert, J., Dötz, F. & Waske, A., 1 Jan 2018, In: Chemical engineering science : Génie chimique. 175.2018, 16 January, p. 84-90 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties

    Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P. & Hohenwarter, A., 1 Jan 2018, In: Acta materialia. 142.2018, 1 January, p. 201-212 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  83. E-pub ahead of print

    High strength nanostructured Al-based alloys through optimized processing of rapidly quenched amorphous precursors

    Kim, S. Y., Lee, G. Y., Park, G. H., Kim, H. A., Lee, A. Y., Scudino, S., Prashanth, K. G., Kim, D. H., Eckert, J. & Lee, M. H., Jan 2018, (E-pub ahead of print) In: Scientific reports (London : Nature Publishing Group). 8.2018, 12 p., 1090.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    30 nm X-ray focusing correlates oscillatory stress, texture and structural defect gradients across multilayered Ti N-SiOx thin film

    Keckes, J., Daniel, R., Todt, J., Zalesak, J., Sartory, B., Braun, S., Gluch, J., Rosenthal, M., Burghammer, M. C., Mitterer, C., Niese, S. & Kubec, A., 2018, In: Acta materialia. 144, p. 862-873

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    A comparative study on NbOx films reactively sputtered from sinterd and cold gas sprayed targets

    Lorenz, R., O`Sullivan, M., Fian, A., Sprenger, D., Lang, B. & Mitterer, C., 2018, In: Applied surface science. p. 1157-1162

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Additive Manufacturing of a β-Solidifying γ-Titanium Aluminide Alloy

    Bürstmayr, R., 2018

    Research output: Thesis › Master's Thesis

  87. Published

    Adhesion of critical interfaces in microelectronics

    Kleinbichler, A., 2018

    Research output: Thesis › Doctoral Thesis

  88. Published

    Advanced TiAlTaN hard coatings for cutting tools

    Großmann, B., 2018

    Research output: Thesis › Doctoral Thesis

  89. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, Materials Science Forum. Vol. 941.2018. p. 1484-1489 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    A high-resolution sight on the compositional differences of proeutectoid- and pearlitic cementite

    Landefeld, A. & Schnitzer, R., 2018.

    Research output: Contribution to conference › Poster › Research

  91. Published

    Arc evaporated Ti-Al-N/Cr-Al-N multilayer coating systems for cutting applications

    Teppernegg, T., Czettl, C., Michotte, C. & Mitterer, C., 2018, In: International journal of refractory metals & hard materials. 72, p. 83-88

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Atomic-scale characterization of severely deformed nanocrystalline alloys

    Guo, J., 2018

    Research output: Thesis › Doctoral Thesis

  95. Published

    Atomistic investigations on the role of dislocations and interfaces for the mechanical and physical properties of metallic alloys and inorganic-organic heterostructures

    Romaner, L., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  96. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Biegeverhalten von verzinkten presshärtenden Stählen

    Stadler, M., 2018

    Research output: Thesis › Master's Thesis

  100. Published

    Bimetallic diffusion modeling and temperature regulation during ball milling

    Aureli, M., Doumanidis, C. C., Gunduz, I. E., Suliman Hussien, A. G., Liao, Y., Kostoglou, N., Rebholz, C. & Doumanidis, C. C., 2018, In: Materials and Design. p. 233-243

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Bulk metallic glass composites fabricated via high pressure torsion

    Krämer, L., 2018

    Research output: Thesis › Doctoral Thesis

Previous 1...11 12 13 14 15 16 17 18 ...55 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben