Chair of Polymer Processing (350)

Organisational unit: Chair

801 - 850 out of 946Page size: 50

Research output

  1. 2009
  2. Published

    On the evaluation of the visual impact of sink marks of injection molded parts

    Pacher, G. A., 2009

    Research output: Thesis › Master's Thesis

  3. Published

    Physical Model for the Expansion Injection Molding Process and Degradation Effects on the Injection Molded Parts due to Extreme Processing Conditions

    Jegadeesan, R., Friesenbichler, W., Langecker, G. & Steinbichler, G., 2009

    Research output: Non-textual form › Web publication/site › Research

  4. Published

    Physikalisches Schäumen

    Piontek, M., Laske, S. & Holzer, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    PIM - Feedstocks

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  6. Published

    Polymere Nanocomposites

    Laske, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Polymer nanocomposites prepared by melt mixing: From laboratory to semi-industrial scale

    Kracalik, M., Laske, S. & Holzer, C., 2009, Advances in Plastics Technology - APT09 - Abstracts and Papers. p. 5-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Polymer-Schichtsilikat Nanocompisites: Vom Labor zum industriellen Compoundieren

    Kracalik, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  9. Published

    Pressure dependent viscosity and its importance for injection molding simulations

    Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Filz, P. & Webelhaus, K., 2009, Conference Proceedings. p. 217-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    Rheologische Analyse

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Semi-industrial approach for wear measurement in injection moulds

    Friesenbichler, W. & Oláh, L., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Simulation Aufheizprozess Thermoformen

    Fertschej, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Simulation des Aufheizprozesses

    Fertschej, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Simulation von Extrusionswerkzeugen

    Fertschej, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Spritzgießsimulation

    Lucyshyn, T., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Studies of the melting behaviour of polypropylene nanocomposites using x-ray diffraction

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Studies on the melting behavior of polypropylene nano-composites using X-ray diffraction and differential scanning calorimetry

    Feuchter, M., Maier, G., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2642-2646

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Synthetisches Kopierpapier auf Basis nachwachsender, polymerer Rohstoffe

    Laske, S., 2009

    Research output: Thesis › Doctoral Thesis

  23. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 96-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009, PPS-25 Program & Abstracts . p. 135-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures: 25th Annual Meeting of the Polymer Processing Society

    Duretek, I., Friesenbichler, W. & Kucher, C., 2009

    Research output: Non-textual form › Web publication/site › Research

  27. Published

    Verfahrenstechnische Analyse eines integrierten Systems zur beschleunigten Rezepturentwicklung auf Basis einer vollelektrischen 2K-Spritzgießmaschine und der Methoden des HTS (High Throughput Screening)

    Brunmayr, J., 2009

    Research output: Thesis › Diploma Thesis

  28. Published

    Verfahrensvergleich zur Herstellung von mikro- und nanostrukturierten Oberflächen

    Lemmerer, S., 2009

    Research output: Thesis › Master's Thesis

  29. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Duretek, I., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Viskositätsdaten für die Spritzgieß-Simulation

    Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Wear of plastic mold steels under injection molding conditions

    Oláh, L. & Friesenbichler, W., 2009, In: Transactions of FAMENA. 33, p. 15-24

    Research output: Contribution to journal › Article › Research › peer-review

  32. 2008
  33. Published

    Advanced Compounding - Einsatz einer Schmelzepumpe und In-Line NIR Messtechnik für die Aufbereitung von Polypropylen Nanocomposites

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, Effizienz im Blickpunkt; Fakten - Technik - Konsequenzen. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Advanced Compounding of Polymer Nanocomposites: Assembling a Melt Pump and In-line Near Infrared Spectroscopy into Extrusion Line

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    A new practical measurement for demolding forces and coefficients of friction in injection molding

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2008, Proceeding of the PPS-24. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Berechnung der Eigenspannungen beim Umspritzen von Einlegeteilen mittels der Methode der Finiten Elemente

    Kisslinger, T., 2008

    Research output: Thesis › Diploma Thesis

  37. Published

    Berechnung der Strangaufweitung an einfachen Extrusionsdüsen unter Berücksichtigung des viskoelastischen Verhaltens von Kunststoffschmelzen mit Hilfe der FEM

    Picha, M., 2008

    Research output: Thesis › Diploma Thesis

  38. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Maier, G., Feuchter, M., Pinter, G., Kracalik, M., Laske, S. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2008, Materials Research Society Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Doppelschneckenextruder

    Schuschnigg, S., 2008, In: Triple m. p. 19-19

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of Glass Fibers on Rheology, Thermal and Mechanical Properties of Recycled PET

    Kracalik, M., Pospisil, L., Slouf, M., Mikesova, J., Sikora, A., Simonik, J. & Fortelny, I., 2008, In: Polymer Composites. 29, p. 915-921

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Ermittlung der Fließfähigkeit und Plastifizierarbeit von handelsüblichen MIM-Feedstocks

    Yilmaz, A., 2008

    Research output: Thesis › Diploma Thesis

  43. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Märzinger, W. & Langecker, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    FT-NIR AS A QUANTITATIVE DETERMINATION METHOD FOR POLYMER NANOCOMPOSITES

    Laske, S., Kracalik, M., Feuchter, M., Maier, G., Pinter, G., Märzinger, W., Haberkorn, M. & Langecker, G., 2008, PPS-24. p. 290-290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Haft- und Entformungskräfte beim Spritzgießen in Abhängigkeit von Stahlwerkstoff, Oberflächenstruktur, Beschichtung und Kunststofftyp

    Freudenschuss, G., 2008, 148 p.

    Research output: Thesis › Master's Thesis

  46. Published

    Herstellung und Charakterisierung von hochgefüllten und geschäumten Flachfolien auf Basis nachwachsender Rohstoffe

    Piontek, M., 2008

    Research output: Thesis › Master's Thesis

  47. Published

    Kunststoffverarbeitung mit dem konisch gleichlaufenden NCT-Extruder

    Schuschnigg, S., 2008, Extrusion am Puls der Zeit. Im Fokus: Energie, Wirtschaftlichkeit und Qualität. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, PPS-24. p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Measurement of pvT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Measurement of PVT-data at process near cooling rates for injection moulding simulation and comparison of simulation results with experimental data

    Lucyshyn, T., Langecker, G. & Fischer, K., 2008, In: VLK-News. p. 4-7

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

    Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Optimization of Compatibilizer Admixture in Polypropylene-Organclay Nanocomposites by Extensional Rheology

    Kracalik, M., Laske, S., Feuchter, M., Maier, G., Pinter, G., Friesenbichler, W. & Langecker, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting - Book of Abstracts. p. 43-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...13 14 15 16 17 18 19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501