Chair of Polymer Processing (350)

Organisational unit: Chair

651 - 700 out of 946Page size: 50

Research output

  1. 2011
  2. Published

    Effect of processing on the viscoelastic, tensile and optical properties of albumen/starch-based bioplastics

    Gonzalez-Gutierrez, J., Partal, P., Garcia-Morales, M. & Gallegos, C., 11 Feb 2011, In: Carbohydrate Polymers. 84, 1, p. 308-315

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    A new injection moulding machine rheometer to study the rheological behaviour of polymer melts at very high shear-rates

    Selvasankar, R. K., Duretek, I., Friesenbichler, W. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    A new setup for viscosity measurements of fluids as a function of shear rate and pressure

    Gallaun, U., Zurk, A.-P., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 276-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    A physical model for a quality control concept in injection moulding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2011, Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society . p. 251-251

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Berechnung der Einzugszone und der Aufschmelzzone eines konisch gleichlaufenden Doppelschneckenextruders

    Münzer, M. H., 2011

    Research output: Thesis › Master's Thesis

  7. Published

    Effect of organoclay surface treatment on the property profile of recycled PET nanocomposites

    Kracalik, M., Witschnigg, A., Laske, S. & Holzer, C., 2011, Proceedings of the European Polymer Congress 2011. p. 152-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Effect of physical vapour deposition coating on the flow properties of the thermoplastics and wood plastic composites

    Duretek, I., Selvasankar, R. K. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 236-236

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Einfluss von Verarbeitungsparametern im Spritzguss und Fügen auf die Eigenschaften von mikrofluidischen Chips für medizintechnische Anwendungen

    Pfefferkorn, M. S., 2011

    Research output: Thesis › Master's Thesis

  10. Published

    Einsatz von Inline-NIR-Messtechnik für einen effektiven Compoundierprozess: Beispiel an polymeren Nanocomposites

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2011, 2. Tagung Innovation Messtechnik. p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Einsatz von nanoskaligen Schichtsilikaten in Polymilchsäure

    Kracalik, M., Hirschenauer, M., Witschnigg, A., Laske, S. & Holzer, C., 2011,

    Polymerblends & Nanocomposites mit biobasierten Komponenten - 14. Problemseminar - Programm & Kurzreferate

    .     p. 40-40

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Elongational and shear flow in polymer-clay nanocomposites measured by on-line extensional and off-line shear rheometry

    Kracalik, M., Laske, S., Witschnigg, A. & Holzer, C., 2011, In: Rheologica acta. 50, p. 937-944

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Extensional Rheology as Effective Tool for Characterization of Polymer Nanocomposites

    Kracalik, M., Laske, S. & Holzer, C., 2011, Novel Trends in Rheology IV - AIP Conference Proceedings. p. 208-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Fundamental modelling of the expansion injection moulding with its simulation and the material degradation analyses on the moulded parts

    Rajganesh Jegadeesan, X., 2011

    Research output: Thesis › Doctoral Thesis

  15. Published

    Herstellung medienführender Leitungen durch Kombination von Coinjektion und Wasserinjektionstechnik

    Stückler, S., 2011

    Research output: Thesis › Master's Thesis

  16. Published

    Homogenitätsanalyse von Feststoffmischungen

    Eberhard, D., 2011

    Research output: Thesis › Master's Thesis

  17. Published

    Influence of induced shear energy and residence time on material properties of polypropylene nanocomposites

    Witschnigg, A., Laske, S., Duretek, I. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 150-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Influence of processing conditions and induced shear work on the thermal, rheological and mechanical behavior of polymer nanocomposites

    Mattausch, H., Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 157-158

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Influence of shear energy on the properties of polyolefin nanocomposite pipes: Plastics Research Online, Reihentitel: 10.1002/spepro.003977

    Witschnigg, A., Laske, S., Kracalik, M. & Holzer, C., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  20. Published

    Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

    Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

    Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

    .     p. 155-155

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of the heat transfer coefficient on the injection molding simulation of microstructures

    Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2011, Conference Proceedings - ICIT & MPT 2011 . p. 141-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigations of adhesion on two-shot moulded parts

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Kunststoffverarbeitung-Vom Rohstoff zum fertigen Bauteil

    Piontek, M., Holzer, C. & Laske, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Local structure around nano-clay agglomerates in PP composites – a scanning X-Ray diffraction study with sub micron resolution

    Feuchter, M., Maier, G. A., Burghammer, M., Kracalik, M., Laske, S., Keckes, J. & Pinter, G., 2011, European Polymer Congress 2011. p. 515-515

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Measurement of the visual perceptibility of sink marks in injection molded parts

    Haba, D., 2011, 79 p.

    Research output: Thesis › Master's Thesis

  26. Published

    Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould

    Friesenbichler, W., Duretek, I., Rajganesh Jegadeesan, X. & Selvasankar, R. K., 2011, In: Polimery/Polymers. 56, 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Mischteilberechnungen mittels FEM

    Kienzl, W., 2011, 113 p.

    Research output: Thesis › Master's Thesis

  28. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Laske, S., Katschnig, M. & Balika, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Nanostructured polymer surfaces to optimize cell behaviour

    Holzer, C., Katschnig, M., Kracalik, M., Andraschek, N., Laske, S., Schäfer, U. & Balika, W., 2011, Abstract Book. p. 72-72

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Near infrared spectroscopy - a smart way of characterization and quality control of PP-NC

    Witschnigg, A., Laske, S., Holzer, C., Patel, R., Khan, A., Benkreira, H. & Coates, P., 2011, Enhanced Polymer Processing. p. 266-284

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Numerical modelling of flow in conical co-rotating twin screw extruder

    Selvasankar, R. K., Schuschnigg, S., Fertschej, A. & Holzer, C., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    On the demolding of micro-structured surfaces for medical applications

    Struklec, T., 2011, 78 p.

    Research output: Thesis › Master's Thesis

  33. Published

    Polymeres Papier als Beispiel für Nachhaltigkeit durch Innovation

    Laske, S., Katschnig, M. & Holzer, C., 2011, Umweltverträgliche Produktion und nachhaltiger Erfolg - Chancen, Benchmarks & Entwicklungslinien. p. 92-100

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  34. Published

    Polymerpapier auf Basis nachwachsender polymerer Rohstoffe

    Laske, S. & Holzer, C., 2011, Kurzfassungen der Vorträge "Zukunft - Forum Papier - Österreichische Papierfachtagung 2011". p. 6-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Replication of Stochastic and Geometric Micro Structures. Aspects of Visual Appearance

    Berger, G., Gruber, D. P., Friesenbichler, W., Teichert, C. & Burgsteiner, M., 2011, In: International polymer processing. XXVI, p. 313-322

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Surface Modification of Unfilled and Highly Filled Polylactic Acid Films Using Corona Discharge Treatment

    Laske, S., Rüf, E., Piontek, M. & Holzer, C., 2011, In: Journal of characterization and development of novel materials. 4, 2, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    The Future of Polymer Processing

    Holzer, C., 2011, Cetrdeseta obljetnica usmjerenja prerada polimera. p. 15-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    The Future of Polymer Processing

    Holzer, C., 2011, In: Polimeri. p. 124-129

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Verbundhaftungsuntersuchungen an Zweikomponenten-Spritzgussteilen

    Kisslinger, T., Lucyshyn, T., Doler, M., Langecker, G. & Holzer, C., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 153-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Verfahrensentwicklung von physikalisch geschäumten Polypropylenplatten für den Einsatz als Kernmaterial von Sandwichverbunden

    Braun, A. C., 2011, 303 p.

    Research output: Thesis › Doctoral Thesis

  41. 2010
  42. Published

    Replication of micro-and nanostructures on polymer surfaces

    Holzer, C., Gobrecht, J., Schift, H. & Solak, H., 1 Oct 2010, In: Macromolecular Symposia. 296, 1, p. 316-323 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    METHOD FOR PRODUCING A SYNTHETIC PAPER AND PAPER PRODUCED THEREWITH

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 15 Jul 2010, IPC No. B29C55/02, B32B27/36, Patent No. WO2010078610 (A1)

    Research output: Patent

  44. Published

    METHOD FOR PRODUCING A SYNTHETIC PAPER AND PAPER PRODUCED THEREWITH

    Laske, S. (Inventor), Langecker, G. R. (Inventor) & Friesenbichler, W. (Inventor), 15 Jul 2010, IPC No. B29C55/12, Patent No. AT507721 (A2)

    Research output: Patent

  45. Published

    Development of highly-transparent protein/starch-based bioplastics

    Gonzalez-Gutierrez, J., Partal, P., Garcia-Morales, M. & Gallegos, C., Mar 2010, In: Bioresource technology. 101, 6, p. 2007-2013

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A Conical Co-Rotating Machine Puts on the Pressure

    Klammer, G., Holzer, C., Schuschnigg, S. & Selvasankar, R. K., 2010, In: Kunststoffe <München> / Kunststoffe international. p. 59-62

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Analyse des Prozessablaufs und des verarbeitungsbedingten Materialabbaus beim Expansionsspritzgießen

    Battisti, M., 2010

    Research output: Thesis › Master's Thesis

  48. Published

    Ceramic and Polymer Matrix Composites: Properties, Performance and Applications

    Kracalik, M., Laske, S. & Holzer, C., 2010, Polymer Matrix Composites: Properties, Performance and Applications. p. 169-194

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Characterization of the Orientation Parameters Around Crack Tips in Unfilled and Nanofilled Poly(propylene) Using in-situ Synchrotron Small and Wide Angle Scanning Scattering Techniques

    Feuchter, M., Maier, G., Zizak, I., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2010, MODERN TRENDS IN POLYMER SCIENCE-EPF 09. Vol. 296. p. 189-196 (MACROMOLECULAR SYMPOSIA).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  50. Published

    Comparative ecological assessment of a sheet of paper based on the biopolymer PLA and on normal pulp

    Katschnig, M., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Comparative ecological assessment of a sheet of paper based on the biopolymer PLA and on normal pulp

    Katschnig, M., Laske, S. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 122-122

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Determination of the elongational viscosity of polymer nanocomposites using different measurement methods

    Mattausch, H., Laske, S. & Holzer, C., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...10 11 12 13 14 15 16 17 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501