Chair of Polymer Processing (350)

Organisational unit: Chair

501 - 550 out of 946Page size: 50

Research output

  1. 2014
  2. Published

    RECYCLINGSVERFAHREN VON BOHRLOCHFESTKÖRPERN IN POLYMEREN

    Holzer, C. (Inventor) & Hofstätter, H. (Inventor), 23 Jul 2014, IPC No. C08K 11/ 00 A I, Patent No. EP2756028, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  3. Published

    УТИЛИЗАЦИЯ ЧАСТИЦ БУРОВОГО ШЛАМА В ПОЛИМЕРАХ

    Хофштеттер, Х. (Inventor) & Holzer, C. (Inventor), 30 Jun 2014, IPC No. C08K 3/ 34 A I, Patent No. EA201490564, Priority date 14 Sept 2012, Priority No. WO2012EP68165

    Research output: Patent

  4. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Analysis, Implementation and Investigation of a Wireless In-Mold Sensor for Injection Molding

    Müller, F., 2014, 207 p.

    Research output: Thesis › Doctoral Thesis

  6. Published

    Analysis of Double Percolated Networks of Polyamide Chains/Carbon Nanotubes under Shearing Flows

    Gooneie, A., Nazockdast, H. & Shahsavan, F., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Analysis of Double Percolated Networks of Polyamide Chains/Carbon Nanotubes under Shearing Flows

    Gooneie, A., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Bruchbeständigkeit einer extrusionsblasgeformten Kunststoffflasche in ihrem Produktlebenszyklus

    Raimann, P., 2014, 81 p.

    Research output: Thesis › Master's Thesis

  9. Published

    Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations

    Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Charakterisierung und Einfluss der rheologischen Eigenschaften auf die Schaummorphologie physikalisch geschäumter Polyethylenmaterialformulierungen

    Uray, A., 2014, 84 p.

    Research output: Thesis › Master's Thesis

  11. Published

    Charakterisierung von Kunststoffen in Hinblick auf inline Qualitätskontrolle in Extrusionsprozessen mittels Nahinfrarotspektroskopie

    Witschnigg, A., 2014, 178 p.

    Research output: Thesis › Doctoral Thesis

  12. Published

    Compounding of polymer nanocomposites

    Laske, S., 2014

    Research output: Thesis › Habilitation thesis › peer-review

  13. Published

    Effects of the polymeric niche on neural stem cell characteristics during primary culturing

    Katschnig, M., Haubenwallner, S., Fasching, U., Patz, S., Trattnig, C., Andraschek, N., Grünbacher, G., Absenger, M., Laske, S., Holzer, C., Balika, W., Bauer, G. & Schäfer, U., 2014, In: Journal of materials science / Materials in medicine.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer

    Geissler, B., Laske, S., Uray, A., Holzer, C. & Langecker, G., 2014, Influence of cellulose fiber on the foaming behavior of a polypropylene copolymer. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of different blowing and nucleating agents on the degassing pressure and the foam morphology of physically foamed polypropylene

    Geissler, B., Walluch, M., Laske, S., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    INFLUENCE OF MINERAL FILLERS ON THE FLAME RETARDANCY OF EXPANDABLE GRAPHITE / POLYPROPYLENE MATERIALS

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of Antec 2014. p. 115-120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of the Flow Channel Geometry on the Degassing Pressure in foam Extrusion

    Geissler, B., Schuschnigg, S., Laske, S., Macher, J., Holzer, C. & Langecker, G., 2014, Proceedings of the Technical Conference Exhibition. p. 2496-2499

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Multiscale Simulation of Polymers

    Gooneie, A., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    NIR – spectroscopy: a sophisticated tool for process and quality control

    Witschnigg, A., Laske, S. & Holzer, C., 2014, NIR – spectroscopy: a sophisticated tool for process and quality control. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., Perko, L., Schuschnigg, S. & Holzer, C., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Numerical Simulation of Temperature Changes in Rubber Compounds Flowing Through Conical Dies: an Engineering Approach

    Gooneie, A., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

    Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Optimierung der Wärmeleitfähigkeit von kompakten Polyethylen in Hinblick auf geschäumte Dämmstoffe

    Kerschbaumer, R., 2014

    Research output: Thesis › Master's Thesis

  29. Published

    PP-Polymer Nanocomposites with Improved Mechanical Properties Using Elongational Flow Devices at the Injection Molding Compounder

    Battisti, M. G. & Friesenbichler, W., 2014, In: AIP Conference Proceedings. 1593, p. 195-198

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Properties and applications of nanoclay composites

    Mattausch, H., 2014, Polymer Nanoclay Composites.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  31. Published

    Prozessführungen und Materialformulierungen für physikalisch geschäumte Polymerprodukte

    Geißler, B., 2014, 192 p.

    Research output: Thesis › Doctoral Thesis

  32. Published

    Spritzgießtechnologie

    Lucyshyn, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Steigerung der thermischen Beständigkeit von Polymeren auf Basis nachwachsender Rohstoffe

    Ziegler, W., 2014, 110 p.

    Research output: Thesis › Master's Thesis

  34. Published

    Strategies to improve the mechanical properties of high-density polylactic acid foams

    Geissler, B., Feuchter, M., Laske, S., Fasching, M., Holzer, C. & Langecker, G., 2014, In: Journal of Cellular Plastics [Elektronische Ressource]. p. 1-21

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Study of the Effects of Electric Parameters on the polyacrylamide NanoFilm Thickness Produced via Electro-Polymerization

    Shahsavan, F., Eslami, H. & Gooneie, A., 2014, Proceedings of 11th International Seminar on Polymer Science and Technology (ISPST2014). p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Tailor-made high density pla foam sheets – strategies to improve the mechanical properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014,

    Blowing Agents & Foaming Processes 2014

    .     p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Tailor-made high density PLA foam sheets – strategies to improve the mechanical properties

    Geißler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G., 2014, In: Cellular polymers. 33, p. 233-242

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Tailor-Made High Density PLA Foam Sheets - Strategies to Improve the Mechanical Properties

    Geissler, B., Feuchter, M., Laske, S., Walluch, M., Holzer, C. & Langecker, G. R., 2014, In: Cellular polymers. 33, 5, p. 249-257

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The Effect of Mineral Fillers on the Rheological, Mechanical and Thermal Properties of Halogen-Free Flame-Retardant Polypropylene/Expandable Graphite Compounds

    Mattausch, H., Laske, S., Hohenwarter, D. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

    Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

    Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, In: Polymer Testing.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Tribological Investigations of Polyamide Nanocomposites

    Witschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Untersuchungen zur Rückgewinnung ausgewählter technischer Thermoplaste aus komplexen Abfallströmen

    Hoeggerl, G., 2014

    Research output: Thesis › Master's Thesis (University Course)

  44. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    UWG für Mikrogranulat

    Schuschnigg, S., 2014, WerWasWo.Forschung@MUL. p. 210-210

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Verwendung von Bohrloch-Cuttings als Füllstoff in Kunststoffen

    Holzer, C., Witschnigg, A., Laske, S., Kowalcyzk, D., Hofstätter, H. & Schulze, K., 2014, Tagungsband zur 12. DepoTech-Konferenz 2014. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    WerWasWo.Forschung@MUL 2014

    Schuschnigg, S. (Editor), 2014, Eigenverlag. (WerWasWo; vol. 5)

    Research output: Book/Report › Book › Transfer

  49. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. 2013
  52. Published

    EXPLOSIVE CARTRIDGE

    Moser, P. (Inventor), Bauer, F. F. (Inventor), Friesenbichler, W. (Inventor), Fertschej, A. (Inventor) & Schatzer, R. (Inventor), 27 Nov 2013, IPC No. F42D C I, Patent No. ZA201206754, Priority date 25 Mar 2011, Priority No. WO2011EP54635

    Research output: Patent

Previous 1...7 8 9 10 11 12 13 14 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501