Chair of Polymer Processing (350)

Organisational unit: Chair

1 - 50 out of 944Page size: 50

Research output

  1. 2025
  2. Published

    Der Slalom des Ski-Recyclings

    Höfler, K. & Zidar, D., 22 Feb 2025, 2 p.

    Research output: Other contribution › Research

  3. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Recycling the unrecyclable: Analyses of recycling opportunities in the winter sport industry

    Zidar, D., Bandl, C., Cwioro, T., Pardametz, V., Krempl, N. & Holzer, C., 24 Jan 2025, 4th International Conference on Polymer Process Innovation (PPI). Centre for Polymer and Material Technologies, p. 237-240 4 p. 20901

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Upcycling of regenerates and injection molding through a new technological approach

    Shahroodi, Z., Zidar, D., Krempl, N., Friesenbichler, W. & Holzer, C., 24 Jan 2025, PPI 2024 : International Conference on Polymer Process Innovation, Proceedings. p. 219-223 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2024
  7. Published

    CircularBioMat

    Schuschnigg, S. & Holzer, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. Griesser, T. & Ladstätter, E. (eds.). Leoben, Vol. 13. p. 223

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Feedstock Development for Material Extrusion of Aluminium: Printability and Debinding

    Schuschnigg, S., Momeni, V. & Kukla, C., 21 Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials New Perspectives. Leoben, Vol. 32. p. 132 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Manufacturing of Soft Dielectric Actuator Assemblies by Material Extrusion (MEX)

    Raguz, I., Berer, M., Beier, P., Schlögl, S., Brancart, J., Vanderborght, B. & Holzer, C., 21 Nov 2024, p. 143-151. 9 p.

    Research output: Contribution to conference › Paper

  10. Published

    Analyse und Optimierung von österreichischem Polystyrol-Haushaltsabfall für die Wiederverwendung in Joghurtbecher-Lebensmittelverpackungen

    Krempl, N., Frühwirth, M., Zidar, D., Shahroodi, Z., Holzer, C., Pinter, E., Archodoulaki, M. V., Bichler, L., Jahn, E., Gabriel, V. H. & Aschermayer, F., 13 Nov 2024, VORTRÄGE-Konferenzband zur 17. Recy & DepoTech-Konferenz. p. 305-312 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Recycling of Wintersport Hardgoods - The Challenges of Circularity

    Zidar, D., Krempl, N., Pardametz, V., Bandl, C., Holzer, C., Griesser, T. (Editor) & Ladstätter, E. (Editor), Nov 2024, 32nd Leoben-Conference on Polymer Engineering and Science: New Materials - New Perspectives. p. 39-47 9 p. (Publication Series Polymer Engineering & Science Leoben; vol. 13).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Enhancing Recycled Polymers: The Impact of Reused Glass Fiber Composites on Rheological Properties and Processing Performance

    Shahroodi, Z., Krempl, N., Duretek, I. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  13. Published

    Insights Into LAOS Analysis of Liquid Silicone Rubber for Viscosity Determination

    Azevedo, M., Kerschbaumer, R. C. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  14. Published

    Rheological Characterisation of Powder Injection Moulding Feedstocks

    Duretek, I., Lucyshyn, T. & Holzer, C., 25 Oct 2024.

    Research output: Contribution to conference › Abstract

  15. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Supportless lattice structure of 316L stainless steel fabricated by material extrusion additive manufacturing: Effect of relative density on physical, microstructural and mechanical behaviour

    Parsompech, N., Suwanpreecha, C., Noraphaiphipaksa, N., Hararak, B., Songkuea, S., Schuschnigg, S., Kukla, C., Kanchanomai, C. & Manonukul, A., 14 Sept 2024, In: Materials Science and Engineering: A. 915.2024, November, 14 p., 147270.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Spritzgießcompoundieren im Recycling von Post-Consumer PP Abfällen

    Zidar, D., Krempl, N., Shahroodi, Z., Kirschnick, U. & Holzer, C., 1 Sept 2024, In: Jahresmagazin Kunststofftechnik : Ingenieurwissenschaften ... : im Fokus . 2024, 01, p. 38-42 5 p.

    Research output: Contribution to journal › Article › Research

  18. Published

    Selecting the suitable thermoplastic elastomer as the main component in the feedstock for metal material extrusion of aluminium

    Momeni, V., Shahroodi, Z., Hufnagl, M., Gonzalez-Gutierrez, J., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 8 Aug 2024, In: Results in Engineering. 23.2024, September, 12 p., 102692.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates

    Traintinger, M., Azevedo, M., Kerschbaumer, R. C., Lechner, B. & Lucyshyn, T., 17 Jul 2024, In: Polymers. 16.2024, 14, 20 p., 2033.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Additive Manufacturing of Bone Implants

    Holzer, C., 1 Jul 2024.

    Research output: Contribution to conference › Abstract

  23. Published

    Binder System Composition on the Rheological and Magnetic Properties of Nd-Fe-B Feedstocks for Metal Injection Molding

    Momeni, V., Luca, S., Gonzalez-Gutierrez, J., Cano, S., Sueur, E., Shahroodi, Z., Schuschnigg, S., Kukla, C. & Holzer, C., Jul 2024, In: Applied Sciences (Switzerland). 14.2024, 13, 15 p., 5638.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Recycling of Paper Machine Clothing: ReFibreValue

    Duretek, I., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Additive Manufacturing Material Extrusion @ Institute of Polymer Processing: Alf³

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Additive Manufacturing of Aluminium by Material Extrusion MEX

    Momeni, V., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Chemitecture: Dielectric Elastomer Actuator (DEA) produced by Material Extrusion (MEX)

    Raguz, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Closing the circle of polyolefin packaging: Pack2Loop

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Extrusion and Additive Manufacturing@ Institute of Polymer Processing

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  31. Published

    LightCycle: Upcycling of regenerates with a new Injection Moulding Compounder (IMC)

    Shahroodi, Z., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Material Data Determination @ Institute of Polymer Processing

    Duretek, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Recycling Biobased Plastics: C-PlaNet

    Main, P., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Wintersport Ressource Efficiency and Improved Circular Economy: WINTRUST

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  37. Published

    Unlocking the Potential of Recycled Polypropylene in Food Packaging

    Krempl, N., Holzer, C., Pinter, E., Frühwirth, M., Shahroodi, Z., Jahn, E., Aschermayer, F. & Gabriel, V. H., 19 May 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  38. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  39. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  40. Published

    Polymer Processing Bringing Together Polymers, Metals and Ceramics

    Holzer, C., 18 Apr 2024.

    Research output: Contribution to conference › Abstract

  41. Published

    Production of Permanent Magnets from Recycled NdFeB Powder with Powder Extrusion Moulding

    Rathfelder, S., Schuschnigg, S., Kukla, C., Holzer, C. & Burkhardt, C., 18 Apr 2024, In: Journal of Manufacturing and Materials Processing. 8.2024, 2, 19 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Comparative analysis of binder systems in copper feedstocks for metal extrusion additive manufacturing and metal injection moulding

    Sadaf, M., Cano Cano, S., Bragaglia, M., Schuschnigg, S., Kukla, C., Holzer, C., Vály, L., Kukla, C., Kitzmantel, M., Nanni, F. & Gonzalez-Gutierrez, J., 21 Feb 2024, (E-pub ahead of print) In: Journal of Materials Research and Technology. 29.2024, March-April, p. 4433-4444 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers

    Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction

    Traintinger, M., Kerschbaumer, R. C., Hornbachner, M., Lechner, B. & Lucyshyn, T., 10 Feb 2024, In: Journal of applied polymer science. 141.2024, 6, 18 p., e54901.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Development of Material and Processing Parameters for AM

    Ureña, J., Blasco, J. R., Jordá, O., Martínez, M., Portolés, L., Gonzalez-Gutierrez, J. & Schuschnigg, S., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 231-306 76 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Entwicklung von auf Magnesiumhydroxid basierenden flammgeschützten hochviskosen Polypropylencompounds für Lüftungsrohre

    Sartori, M., 2024

    Research output: Thesis › Master's Thesis

  47. Published

    Evaluierung des Einsatzes von Spritzgießsimulation zur Vorhersage der Maßstreuungen von Kunststoffformteilen

    Schedler, M., 2024

    Research output: Thesis › Master's Thesis

  48. Published

    Fabrication of multi-material dielectric elastomer actuators with the additive manufacturing process of material extrusion

    Beier, P., 2024

    Research output: Thesis › Master's Thesis

  49. Published

    Herstellung von Farbmasterbatches mit unterschiedlichen Trägermaterialien für die weitere Verwendung bei der Produktion von PET-Folien und -Platten

    Maurer, C., 2024

    Research output: Thesis › Master's Thesis

  50. Published

    Influence of binder compositions, solvents, and material extrusion parameters on aluminum additive manufacturing via SDS

    Hufnagl, M., 2024

    Research output: Thesis › Master's Thesis

  51. Published

    Introduction to Additive Manufacturing

    Godec, D., Pilipović, A., Breški, T., Ureña, J., Jordá, O., Martínez, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Blasco, J. R. & Portolés, L., 2024, Springer Tracts in Additive Manufacturing. Springer Nature, p. 1-44 44 p. (Springer Tracts in Additive Manufacturing; vol. Part F3252).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Investigating Hydrogen Diffusion in Filled Polymers with Simple Geometries: An ABAQUS Simulation Study

    Graf, A. L., 2024

    Research output: Thesis › Master's Thesis

Previous 1 2 3 4 5 6 7 8 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501