Chair of Physical Metallurgy (420)

Organisational unit: Chair

401 - 500 out of 2,174Page size: 100

Research output

  1. 2019
  2. Published

    Rate limiting deformation mechanisms of bcc metals in confined volumes

    Kiener, D., Fritz, R., Alfreider, M., Leitner, A., Pippan, R. & Maier-Kiener, V., 1 Mar 2019, In: Acta Materialia. 166.2019, March, p. 687-701 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Solid bitumen in shales: petrographic characteristics and implications for reservoir characterization

    Misch, D., Groß, D., Hawranek, G., Horsfield, B., Klaver, J., Mendez Martin, F., Urai, J., Vranjes-Wessely, S., Sachsenhofer, R., Schmatz, J., Li, J. & Zou, C., 28 Feb 2019, In: International journal of coal geology. 205.2019, 1 March, p. 14-31 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation

    Renk, O., Maier-Kiener, V., Issa, I., Li, J. H., Kiener, D. & Pippan, R., 15 Feb 2019, In: Acta materialia. 165.2019, 165, p. 409-419 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Combination of Nanoindentation and Microscopy for the Examination of Aluminum Alloys in Coarse- and Ultrafine-Grained Condition

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 9 Jan 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 7, p. 432-442 11 p.

    Research output: Contribution to journal › Article › Research

  8. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    An ab initio study of thermodynamic and mechanical stability of stoichiometric Fe2CoAl polymorphs

    Friák, M., Oweisová, S., Pavlu, J., Holec, D. & Šob, M., 2019.

    Research output: Contribution to conference › Poster › Research

  10. Published

    A tailored TiAl alloy for the powder bed based laser additive manufacturing

    Schimbäck, D., 2019

    Research output: Thesis › Master's Thesis

  11. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 4, p. 220-229 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Austenite memory and spontaneous recrystallization and its influence on the martensitic substructure of a PH 15-5 steel during solution annealing

    Brandl, D. C., 2019

    Research output: Thesis › Doctoral Thesis

  13. Published

    Auswirkung fertigungsbedingter Eigenspannungen bei der Schraubenherstellung auf die Festigkeit und die Relaxationsbeständigkeit

    Mayer, M., 2019

    Research output: Thesis › Master's Thesis

  14. Published

    Bainitic reaction under continuous cooling conditions and tempering behaviour of a bainitic microstructure in a low alloyed steel

    Reisinger, S., 2019

    Research output: Thesis › Doctoral Thesis

  15. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 10, p. 624-633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN / AlN multilayers

    Chen, Z., Holec, D., Bartosik, M., Mayrhofer, P. H. & Zhang, Z., 2019, In: Acta materialia. 168.2019, 15 April, p. 190-202 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Einfluss von Inhibitorlösungen auf das Korrosions- und Schwingfestigkeitsverhalten von legierten und unlegierten Stählen

    Freitag, C., 2019

    Research output: Thesis › Master's Thesis

  18. Published

    Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending

    Jakob, S., Leitner, A., Hohenwarter, A., Lorich, A., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Formation of an orthorhombic transition phase in a Ti-Al-3Mo alloy: in situ synchrotron diffraction and TEM studies

    Rashkova, B., Musi, M., Erdely, P., Stark, A., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2019.

    Research output: Contribution to conference › Poster › Research

  20. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Hochauflösende Mikrostrukturuntersuchungen zum Einfluss von Vorauslagerung und Kaltverformung auf die Warmauslagerungskinetik von AlMgSi-Legierungen (EN AW-6016)

    Bergmann, J., 2019

    Research output: Thesis › Master's Thesis

  22. Published

    Materialographie intermetallischer Titanaluminide - die (additive) Fertigung macht den Unterschied

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 21-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Mikrostrukturelle Charakterisierung von Titanblechen zum Personenschutz

    Janda, A., 2019

    Research output: Thesis › Master's Thesis

  25. Published

    Mikrostruktur- und Phasenanalyse einer additiv gefertigten intermetallischen TiAl Legierung mittels metallographischer Methoden und hochenergetischer Röntgenstrahlung

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 155-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Optimierung von intermetallischen TiAl Legierungen in Hinblick auf die Erhöhung der Anwendungstemperatur

    Burtscher, M., 2019

    Research output: Thesis › Doctoral Thesis

  27. Published

    Oxidation behavior of TiAlN-based coatings

    Guo, F., Holec, D., Wang, J., Chen, L. & Du, Y., 2019.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Structure and surface energies of nanoparticles

    Holec, D., Fischer, F.-D. & Vollath, D., 2019.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Surface modifications on cathode during cathodic arc deposition: phase evaluation

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Kolozsvári, S. & Franz, R., 2019.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Teilchenkontrolliertes Kornwachstum in γ-TiAl Hochtemperaturlegierungen für die Additive Fertigung

    Graf, G., 2019

    Research output: Thesis › Master's Thesis

  31. Published

    The Effect of Zirconium on Titanium Aluminides

    Schulz, B., 2019

    Research output: Thesis › Master's Thesis

  32. Published

    Thermally activated deformation mechanisms – High temperature nanoindentation on W-Re alloys

    Kappacher, J., Wurmshuber, M., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Thermally activated deformation processes in various materials studied by advanced nanoindentation experiments

    Maier-Kiener, V., 2019

    Research output: Thesis › Habilitation thesis › peer-review

  34. Published

    Werkstoffcharakterisierung additiv gefertigter Ti-6Al-4V Bauteile und Einfluss der Pulverherstellung

    Fleißner-Rieger, C., 2019

    Research output: Thesis › Master's Thesis

  35. 2018
  36. Published

    Impact of Nano-Scale distribution of atoms on electronic and magnetic properties of phases in Fe-Al nanocomposites: An ab initio study

    Mihalikova, I., Friák, M., Jiraskova, Y., Holec, D., Koutná, N. & Šob, M., 16 Dec 2018, In: Nanomaterials. 8.2018, 12, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Quantum-mechanical study of nanocomposites with low and ultra-low interface energies

    Friák, M., Holec, D. & Šob, M., 15 Dec 2018, (E-pub ahead of print) In: Nanomaterials. 8.2018, 12, 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    An Ab Initio Study of Pressure-Induced Reversal of Elastically Stiff and Soft Directions in YN and ScN and Its Effect in Nanocomposites Containing These Nitrides

    Friák, M., Kroupa, P., Holec, D. & Šob, M., 14 Dec 2018, In: Nanomaterials. 8.2018, 12, 14 p., 1049.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Darstellung und Verifizierung einer elektrolytischen Ätzmethode zur Bestimmung ehemaliger Austenitkorngrenzen eines PH15-5 Stahls

    Brandl, D. C., Höfler, L., Stockinger, M., Ploberger, S., Marsoner, S. M. & Ressel, G., 14 Dec 2018, In: Praktische Metallographie/Practical Metallography. 55.2018, 12, p. 800-812 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Tuning structure and mechanical properties of Ta-C coatings by N-alloying and vacancy population

    Glechner, T., Mayrhofer, P. H., Holec, D., Fritze, S., Lewin, E., Paneta, V., Primetzhofer, D., Kolozsvári, S. & Riedl, H., 5 Dec 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, 11 p., 17669.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Factors controlling shale microstructure and porosity: A case study on Upper Visean Rudov Beds from the Ukrainian Dniepr-Donets Basin: A case study on upper visean rudov beds from the Ukrainian Dneiper-Donets Basin

    Misch, D., Klaver, J., Gross, D., Mayer-Kiener, V., Mendez-Martin, F., Schmatz, J. & Sachsenhofer, R. F., 1 Dec 2018, In: AAPG bulletin. 102, 12, p. 2629-2654 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Structural evolution of oxygen on the surface of TiAlN: Ab initio molecular dynamics simulations

    Guo, F., Wang, J., Du, Y., Holec, D., Ou, P., Zhou, H., Chen, L. & Kong, Y., 22 Nov 2018, In: Applied surface science. 470.2019, March, p. 520-525 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    An ab initio study of connections between tensorial elastic properties and chemical bonds in ∑5(210) grain boundaries in Ni3Si

    Friák, M., Zeleny, M., Všianská, M., Holec, D. & Šob, M., 13 Nov 2018, In: Materials letters. 11.2018, 11, 17 p., 2263.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Self-structuring in Zr1−xAlxN films as a function of composition and growth temperature

    Ghafoor, N., Petrov, I., Holec, D., Greczynski, G., Palisaitis, J., Persson, P. O. Å., Hultman, L. & Birch, J., 5 Nov 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, 17 p., 16327.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Metallurgical processing of titanium aluminides on industrial scale

    Güther, V., Allen, M., Klose, J. & Clemens, H., 26 Sept 2018, (E-pub ahead of print) In: Intermetallics. 103.2018, December, p. 12-22 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Die Grenzen der Austenitrückkonstruktion eines mehrphasigen Stahles in unterschiedlichen Gefügemodifikationen

    Weißensteiner, I., Thomas, H., Clemens, H. & Maier-Kiener, V., 19 Sept 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 301-306 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. E-pub ahead of print

    Origin of the Low Magnetic Moment in Fe₂AlTi: An Ab Initio Study

    Friák, M., Slávik, A., Miháliková, I., Holec, D., Všianská, M., Šob, M., Palm, M. & Neugebauer, J., 14 Sept 2018, (E-pub ahead of print) In: Materials. 11.2018, 9, 10 p., 1732.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    An ab initio study of thermodynamic and mechanical stability of heusler-based Fe2AlCo polymorphs

    Friák, M., Oweisová, S., Pavlu, J., Holec, D. & Šob, M., 27 Aug 2018, In: Materials. 11.2018, 9, 12 p., 1543.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 27 Jul 2018, (E-pub ahead of print) In: Acta materialia. 158.2018, 1 October, p. 193-205 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Theory-guided metal-decoration of nanoporous carbon for hydrogen storage applications

    Holec, D., Kostoglou, N., Tampaxis, C., Babic, B., Mitterer, C. & Rebholz, C., 26 Jul 2018, (E-pub ahead of print) In: Surface & coatings technology. 351.2018, 15 October, p. 42-49 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Grain boundary segregation engineering in as-sintered molybdenum for improved ductility

    Leitner, K., Lutz, D., Knabl, W., Eidenberger-Schober, M., Huber, K., Lorich, A., Clemens, H. & Maier-Kiener, V., 20 Jul 2018, In: Scripta materialia. 156.2018, November, p. 60-63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Ab initio inspired design of ternary boride thin films

    Moraes, V., Riedl, H., Fuger, C., Polcik, P., Bolvardi, H., Holec, D. & Mayrhofer, P. H., 18 Jun 2018, In: Scientific reports (London : Nature Publishing Group). 8.2018, p. 1-9 9 p., 9288.

    Research output: Contribution to journal › Article › Research › peer-review

  55. E-pub ahead of print

    Atomic scale investigations of thermally treated nano-structured Ti-Al-N/Mo-Si-B multilayers

    Aschauer, E., Sackl, S. C., Schachinger, T., Bolvardi, H., Arndt, M., Polcik, P., Riedl, H. & Mayrhofer, P. H., 18 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, September, p. 480-487 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    High Temperature Flow Behavior of Ultra-Strong Nanoporous Au assessed by Spherical Nanoindentation

    Leitner, A., Maier-Kiener, V. & Kiener, D., 24 May 2018, In: Nanomaterials. 8.2018, 6, p. 1-12 12 p., 366.

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Essential refinements of spherical nanoindentation protocols for the reliable determination of mechanical flow curves

    Leitner, A., Maier-Kiener, V. & Kiener, D., 15 May 2018, In: Materials and Design. 146.2018, May, p. 69-80 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Graphite under compression: shift of layer breathing and shear modes frequencies with interlayer spacing

    Sun, Y. W., Holec, D., Xu, Y. & Dunstan, D. J., 3 Apr 2018, In: Journal of Physics Communications. 2018, 2, p. 2-7 6 p., 045004.

    Research output: Contribution to journal › Article › Research › peer-review

  60. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Influence of carbon deficiency on phase formation and thermal stability of super-hard TaCy thin films

    Riedl, H., Glechner, T., Wojcik, T., Koutná, N., Kolozsvári, S., Paneta, V., Holec, D., Primetzhofer, D. & Mayrhofer, P. H., 9 Mar 2018, In: Scripta materialia. 149.2018, May, p. 150-154 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. E-pub ahead of print

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 9 Mar 2018, (E-pub ahead of print) In: Scripta materialia. 149.2018, May, p. 70-74 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. E-pub ahead of print

    Experimental and numerical investigations of the γ″ and γ′ precipitation kinetics in Alloy 718

    Drexler, A. K., Oberwinkler, B., Primig, S., Turk, C., Povoden-Karadeniz, E., Heinemann, A., Ecker, W. & Stockinger, M., 6 Mar 2018, (E-pub ahead of print) In: Materials Science and Engineering A. 723.2018, 18 April, p. 314-323 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    An ab initio study of mechanical and dynamical stability of MoSi2

    Friák, M., Holec, D. & Šob, M., 19 Feb 2018, In: Journal of alloys and compounds. 746.2018, 25 May, p. 720-728 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Stability and elasticity of metastable solid solutiions and superlattices in the MoN-TaN system: First-principles calculations

    Koutná, N., Holec, D., Friák, M., Mayrhofer, P. H. & Šob, M., 14 Feb 2018, In: Materials and Design. 144.2018, April, p. 310-322 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. E-pub ahead of print

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 5 Feb 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 270-276 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Bulk metallic dual phase glasses by severe plastic deformation

    Krämer, L., Champion, Y., Kormout, K. S., Maier-Kiener, V. & Pippan, R., 12 Jan 2018, In: Intermetallics. 94.2018, March, p. 172-178 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    How grain boundary chemistry controls the fracture mode of molybdenum

    Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Additive Manufacturing of a β-Solidifying γ-Titanium Aluminide Alloy

    Bürstmayr, R., 2018

    Research output: Thesis › Master's Thesis

  71. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, Materials Science Forum. Vol. 941.2018. p. 1484-1489 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  72. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Atomistic investigations on the role of dislocations and interfaces for the mechanical and physical properties of metallic alloys and inorganic-organic heterostructures

    Romaner, L., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  75. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Auswirkungen von Oberflächenschädigung auf die Festigkeit in spröden Einkristallen für mikroelektronische Anwendungen

    Gruber, M., Leitner, A., Bermejo, R., Supancic, P., Gindel, T., Kraleva, I. & Danzer, R., 2018, Praktische Metallographie Sonderband. Vol. 52. p. 241-246

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Characterization of anisotropic pores and spatially oriented precipitates in sintered Mo-base alloys using small-angle neutron scattering

    Karge, L., Lang, D., Schatte, J., Gilles, R., Busch, S., Leibenguth, P., Clemens, H. & Petry, W., 2018, In: Journal of applied crystallography. 51.2018, p. 1706-1714 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Characterization of an orthorhombic phase in a water-quenched Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., 2018

    Research output: Thesis › Master's Thesis

  80. Published

    Combined theoretical and experimental study of Fe-Al-Ti superalloys

    Friák, M., Miháliková, I., Slávik, A., Homola, V., Bursikova, V., Pizurová, N., Pavlu, J., Dymacek, P., Dobes, F., Holec, D., Koutná, N., Jiraskova, Y. & Šob, M., 2018.

    Research output: Contribution to conference › Poster › Research

  81. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  82. Published

    Deformation in technical bcc and fcc materials - mechanical and correlative microstructural analyses

    Weißensteiner, I., 2018

    Research output: Thesis › Doctoral Thesis

  83. Published

    Development and characterisation of advanced intermetallic titanium aluminide alloys by means of diffraction and scattering techniques

    Erdely, P., 2018

    Research output: Thesis › Doctoral Thesis

  84. Published

    Elasticity of interfaces: a multi-method approach

    Holec, D., Koutná, N., Vsianská, M., Friák, M., Mayrhofer, P. H. & Šob, M., 2018.

    Research output: Contribution to conference › Poster › Research

  85. Published

    Entwicklung einer ausscheidungsverfestigten Eisenbasislegierung für Hochtemperaturanwendungen

    Godor, F. R., 2018

    Research output: Thesis › Doctoral Thesis

  86. Published

    Gefüge und mechanische Eigenschaften einer intermetallischen TNM-Legierung für den Einsatz als Rennsportventil nach einer neuen Herstellroute

    Tengg, L. M., 2018

    Research output: Thesis › Master's Thesis

  87. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  88. Published

    Impact of the Microstructure of Refractory Metals on their Mechanical Properties - a Multi-Scale Study / Wie die Mikrostruktur von Refraktärmetallen deren mechanische Eigenschaften beeinflusst – eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 603-619 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Inductive heat treatment of a 50CrMo4 steel- evolution of microstructure and mechanical properties

    Eggbauer, A., 2018

    Research output: Thesis › Doctoral Thesis

  90. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Interaction of the H2 molecule with carbon nanostructures: A DFT study

    Nöger, D., 2018

    Research output: Thesis › Master's Thesis

  92. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Kombination von Nanoindentation und Mikroskopie zur Untersuchung von Aluminium-Legierungen im grob- und ultrafeinkörnigen Zustand

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 177-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Materials characterization with atom probe tomography and high resolution transmission electron microscopy

    Mendez Martin, F., Haberfehlner, G., Albu, M. & Trummer, C., 2018.

    Research output: Contribution to conference › Poster › Research

  96. Published

    Mechanical properties of CrN/TiN supperlattices from ab inito calculations

    Löfler, L., Bartosik, M., Mayrhofer, P. H. & Holec, D., 2018.

    Research output: Contribution to conference › Poster › Research

  97. Published

    Metallographische Methoden der Pulvercharacterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Clemens, H. & Mayer, S., 2018, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2018, p. 64-68

    Research output: Contribution to journal › Article › Research

  98. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Multi method study of the stabilization of alumina on Al-Cr droplets

    Löfler, L., Holec, D. & Mayrhofer, P. H., 2018.

    Research output: Contribution to conference › Poster › Research

  101. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Ordering and diffusionless transformations in TiAl

    Abdoshahi, N. & Holec, D., 2018.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben