Chair of Physical Metallurgy (420)
Organisational unit: Chair
Research output
- 2007
- Published
Experimental Studies and Thermodynamic Simulation of Phase Transformation in High Nb Containing TiAl Based Alloys
Clemens, H., Chladil, H., Zickler, G., Takeyama, M., Kozeschnik, E., Bartels, A., Buslaps, T., Gerling, R., Kremmer, S., Yeoh, L. & Liss, K.-D., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1131-1137Research output: Contribution to journal › Article › Research › peer-review
- Published
FEM simulation of the effect of surface roughness on nanoindentation of thin films with a spherical indenter
Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, 34th International Conference on Metallurgical Coatings and Thin Films. p. 60-60Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
„Ferritgehaltbestimmung“
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
First observation of a hexagonal close packed metastable intermetallic phase between Cu and Al bilayer films
Cha, L., Scheu, C., Richter, G., Wagner, T., Sturm, S. & Rühle, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 692-699Research output: Contribution to journal › Article › Research › peer-review
- Published
Formation and modulation of an ultrafine lamellar structure in high Nb containing TiAl alloys
Cha, L., Scheu, C., Chladil, H., Bartels, A., Gerling, R. & Clemens, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Fraktographische Analysen an Laserschweißungen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von gebrochenen Kleinteilen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von Schneidelement
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von Werkzeugen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von Werkzeugen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Untersuchungen an Bauteilen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge
Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192Research output: Contribution to journal › Article › Research › peer-review
- Published
Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation
Rebholz, C., Monclus, M. A., Baker, M. A., Mayrhofer, P. H., Gibson, P. N., Leyland, A. & Matthews, A., 2007, In: Surface & coatings technology. 13, p. 6078-6083Research output: Contribution to journal › Article › Research › peer-review
- Published
Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung
Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443Research output: Contribution to journal › Article › Research › peer-review
- Published
High-temperature tribological behavior of sputtered NbNx thin films
Fontalvo, G., Terziyska, V. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1017-1022Research output: Contribution to journal › Article › Research › peer-review
- Published
Hochtemperaturuntersuchungen an Ni-Basis-Legierungen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Hochtemperaturuntersuchungen an Ni-Basis-Legierungen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Identification of low-friction and wear mechanisms for Ti-C-N coatings
Rebelo De Figueiredo, M., Neidhardt, J. & Mitterer, C., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
iffraction-based Residual Stress Analysis Applied to Problems in the Aircraft Industry
Staron, P., Cihak, U., Clemens, H., Stockinger, M., Bayraktar, F. S., Kocak, M. & Schreyer, A., 2007, In: Advanced engineering materials. 9, p. 627-638Research output: Contribution to journal › Article › Research › peer-review
- Published
Impact of Yttrium on structure and mechanical properties of Cr-Al-N thin films
Rovere, F. & Mayrhofer, P. H., 2007, In: Journal of vacuum science & technology / A (JVST). 25, p. 1336-1340Research output: Contribution to journal › Article › Research › peer-review
- Published
“Influence of bainitic and martensitic microstructures on the mechanical properties of hot-work tool steels”
Mayer, S., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Influence of C and Nb concentrations on the high temperature deformation of Nb-rich gamma-TiAl alloys
Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Influence of high-temperature oxide formation on the tribological behaviour of TiN and VN coatings
Fateh, N., Fontalvo, G., Gassner, G. & Mitterer, C., 2007, In: Wear. 262, p. 1152-1158Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel
Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ Small-Angle X-ray scattering during Scorption in Silica Possessing an Ordered Hierarchical Mesopore Architecture
Smarsly, B., Zickler, G., Sel, O., Kaper, H., Adelhelm, P. & Funari, S. S., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
In situ X-ray diffraction investigation of thermal decomposition of wood cellulose
Zickler, G., Wagermaier, W., Funari, S. S., Burghammer, M. & Paris, O., 2007, In: Journal of Analytical and Applied Pyrolysis. 80, p. 134-140Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ X-ray Diffraction Investigation of thermal Decomposition of Wood Cellulose
Zickler, G., Wagermaier, W., Funari, S. S., Burghammer, M. & Paris, O., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Instrumentierte Kerbschlagbiegeversuche
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
International Symposium on Reactive Sputter Depositon - Abstractband
Mitterer, C. (Editor) & Mayrhofer, P. H. (Editor), 2007, Leoben, Department Metallkunde und Werkstoffprüfung: Eigenverlag.Research output: Book/Report › Anthology › Research
- Published
Kerbschlagbiegeversuche an einem Kettenwerkstoff
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
kriecheigenschaften der beta-erstarrenden gamma-Tial Basislegierung TNM-B1
Chladil, H. & Clemens, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Kriechen von Warmarbeitsstählen
Stergar, E., Panzenböck, M. & Leitner, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Magnetron Sputtered Intermetallic Al2Au and Al-Zr-Y Coatings for the Oxidation Protection of y-TiAl,
Moser, M., Mayrhofer, P. H. & Braun, R., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II05-08-II05-14Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Mechanical and tribological properties of CrN coatings deposited by a simultaneous HIPIMS/UBM sputtering process
Paulitsch, J., Mayrhofer, P. H. & Mitterer, C., 2007, 50th Annual Technical Conference Proceedings. SVC, p. 150-154Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Metallographische Beurteilung hochfester Drähte
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Bohrschäften
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Halbzeugen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Halbzeugen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Heizschlangenrohren
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 3
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 4
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 5
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 6
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 7
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
- Published
Microstructure and mechancial properties of sputtered intermetallic Al-Au coatings
Moser, M., Mayrhofer, P. H., Ross, I. M. & Rainforth, W. M., 2007, In: Journal of applied physics. 102, p. 023523-1-023523-6Research output: Contribution to journal › Article › Research › peer-review
- Published
Milestone 1.4.2: Understanding of the role of different alloying additions in promoting formation of a protective oxide scale
Mayrhofer, P. H., Rovere, F., Moser, M. & Braun, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Milestone 3.2.1: Demonstration of a self-organization process for increased mechanical strength in the coatings after exposure to thermal load during service of a coated part (for the first series of coatings)
Mayrhofer, P. H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
