Chair of Physical Metallurgy (420)

Organisational unit: Chair

1451 - 1500 out of 2,175Page size: 50

Research output

  1. 2008
  2. Published

    Einfluss der Legierungselemente auf die bainitische Umwandlung von Warmarbeitsstählen

    Csanyi, T., 2008, 132 p.

    Research output: Thesis › Diploma Thesis

  3. Published

    Einfluss des Mikrogefüges auf die Maßänderung von HSS Legierungen während der Wärmebehandlung

    Primig, S., 2008

    Research output: Thesis › Diploma Thesis

  4. Published

    Einfluss von Chrom und Mangan auf die Bainitbildung in Dualphasenstählen

    Satzinger, K. L., 2008

    Research output: Thesis › Diploma Thesis

  5. Published

    Einsteins junge Erben

    Mayrhofer, P. H., 2008, In: News : Österreichs größtes Nachrichtenmagazin ; Politik, Geld, Szene, Leute . 03.04.2008, p. 72-76

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Epitaxial growth of Al-Cr-N thin films on MgO (111)

    Willmann, H., Beckers, M., Birch, J., Mayrhofer, P. H., Mitterer, C. & Hultman, L., 2008, In: Thin solid films. p. 598-602

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Experiment and simulation of the compositional evolution of Ti-B thin films by sputtering of a compound target

    Neidhardt, J., Mraz, S., Schneider, J. M., Strub, E., Bohne, W., Liedke, B., Möller, W. & Mitterer, C., 2008, In: Journal of applied physics. 104, p. 063304-1-063304-10

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Formation mechanisms of low-friction tribo-layers on arc-evaporated TiC1 xNx hard coatings

    Rebelo De Figueiredo, M., Neidhardt, J., Kaindl, R., Reiter, A. E., Tessadri, R. & Mitterer, C., 2008, In: Wear. 265, p. 525-532

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Fundamental investigations on stress engineering of sputtered hard coatings

    Köstenbauer, H., 2008, 113 p.

    Research output: Thesis › Doctoral Thesis

  10. Published

    Gefügeausbildung in der ersten Lage von austenitischen Plattierungen auf un- und niedrig-legierten Stählen

    Posch, G., Panzenböck, M., Tösch, J. & Pölzl, S., 2008, In: Practical metallography = Praktische Metallographie. p. 311-323

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Hardness evolution of Al-Cr-N coatings under thermal load

    Willmann, H., Mayrhofer, P. H., Hultman, L. & Mitterer, C., 2008, In: Journal of materials research (JMR). 23, p. 2880-2885

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Hochtemperaturbeschichtung von Ti1-xAlxN auf verschiedenen Schnellarbeitsstählen

    Weirather, T., 2008

    Research output: Thesis › Diploma Thesis

  13. Published

    In- and Ex-situ Investigation of the beta-phase in a Nb and Mo Containing gamma-TiAl Based Alloy

    Clemens, H., Chladil, H., Wallgram, W., Zickler, G., Gerling, R., Liss, K.-D., Kremmer, S., Güther, V. & Smarsly, W., 2008, In: Intermetallics. 16, p. 827-833

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of bipolar pulsed DC magnetron sputtering on elemental composition and micro-structure of Ti-Al-Y-N thin films

    Moser, M., Mayrhofer, P. H., Székely, L., Sáfrán, G. & Barna, P. B., 2008, In: Surface & coatings technology. 203, p. 148-155

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of C and Nb Concentration on the High Temperature Deformation Behaviour of Nb-rich Gamma-TiAl Alloys

    Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2008, Ti-2007 Science and Technology. p. 685-688

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Influence of different atmospheres on the thermal decomposition of Al-Cr-N coatings

    Mayrhofer, P. H., Willmann, H., Hultman, L. & Mitterer, C., 2008, In: Journal of physics / D, Applied physics. 41, p. 155316-155320

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    INFLUENCE OF OXIDATION PROTECTIVE COATINGS ON THE DUCTILITY OF A gamma-TiAl BASED ALLOY

    Moser, M., Mayrhofer, P. H. & Clemens, H., 2008,

    The Minerals, Metals & Materials Society, 137th annual meeting proceedings

    .     TMS, p. 305-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Influence of pulsed bias on CrN coatings prepared by reactive magnetron sputtering

    Grasser, S., 2008

    Research output: Thesis › Diploma Thesis

  20. Published

    Innovation aus & mit der Wissenschaft: Exzellenz und Kooperation

    Mayrhofer, P. H., 2008, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    In-situ Characterization of Phase Transformations and Microstructure Evolution in a gamma-TiAl Based Alloys

    Liss, K.-D., BARTELS, A., Clemens, H., Stark, A., Buslaps, T., Phelan, D. & Yeoh, L. A., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 137-144

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    In-situ high-temperature characterisation of phase transformations in intermetallic γ-TiAl alloys

    Zickler, G., Drössler, L., Clemens, H., Klaus-Dieter, L. & Hölzel, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    In-situ High-Temperature SAXS Studies of the Precipitation Kinetics in a Fe-Co-Mo Alloy

    Zickler, G., Eidenberger, E., Stergar, E., Leitner, H., Clemens, H., Lippmann, T., Staron, P., Fischer, T., Schreyer, A. & Novak, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    In-situ Small-angle X-ray Scattering Study of Sorption in an Ordered Hierarchical Mesoporius Silica Material

    Zickler, G., Mascotto, S., Chuenchom, L., Timmann, A. & Smarsly, B., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Intermetallische Werkstoffe für Anwendungen in Automobil- und Flugzeugtriebwerken

    Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 337-341

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 373-382

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Kinetik der Sigma - Phasen - Ausscheidung in Fe - Cr - Legierungen für Interkonnektoren in SOFC - Brennstoffzellen

    Prohaska, M., 2008

    Research output: Thesis › Diploma Thesis

  31. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Local deformation behaviour of high-strength PM-tool steels

    Gruber, P., Jesner, G., Ebner, R. & Kolednik, O., 2008, New Developments on Metallurgy and Applications of High Strength Steels. Vol. 067. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Low-friction coatings based on lubricious vanadium oxides

    Fateh, N., 2008

    Research output: Thesis › Doctoral Thesis

  34. Published

    Low-friction mechanisms active for carbon-containing coatings: Ti-C-N as a model system

    Rebelo De Figueiredo, M., Neidhardt, J., Franz, R. & Mitterer, C., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 263-267

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Mechanical properties and deformation of CrN and Cr/CrN coatings during nanoindentation: Experiments and theoretical calculations

    Daniel, R., Herrmann, M., Richter, F. & Mitterer, C., 2008, 35th International Conference on Metallurgical Coatings and Thin Films. p. 109-109

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Micro- and bonding structure of arc-evaporated AlCrVN low-friction coatings

    Franz, R., Neidhardt, J., Sartory, B., Tessadri, R. & Mitterer, C., 2008, In: Thin solid films. 516, p. 6151-6157

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Micro and macroscale tribological behavior of epitaxial Ti3SiC2 thin films

    Emmerlich, J., Gassner, G., Eklund, P., Högberg, H. & Hultman, L., 2008, In: Wear. 264, p. 914-919

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Micro mechanic testing and Local Electrode Atom Probe Microscope (LEAP) measurements on oxide dispersed strengthened (ODS) alloys

    Stergar, E., Hosemann, P., Vieh, C., Greco, R. R., Cappiello, M. J. & Maloy, S. A., 2008, In: Transactions of the American Nuclear Society (ANS transactions). 98, p. 1123-1124

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Micro Mechanic Testing and Local Electrode Atom Probe Micrscope (LEAP) Measurements on Oxide Dispersed Strengthened (ODS) Alloys

    Hosemann, P., Stergar, E., Vieh, C., Greco, R. R., Leitner, H. & Maloy, S. A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Microscopical and sub-microscopical characterization of a heavy plate made of a micro-alloyed HSLA steel

    Felfer, P., 2008, 187 p.

    Research output: Thesis › Diploma Thesis › peer-review

  41. Published

    Microstructural investigation of a Fe-Co-Mo alloy by means of SANS and atom probe analysis

    Schmölzer, T., 2008

    Research output: Thesis › Diploma Thesis

  42. Published

    Microstructure and corresponding tensile properties of As-cast, beta-solidifying, gamma-TiAl based TNM alloys

    Güther, V., Otto, A., Klose, J., Rothe, C., Clemens, H., Kachler, W., Winter, S. & Kremmer, S., 2008, Structural Aluminides for Elevated Temperatures. TMS, p. 249-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Microstructure and Mechanical Properties of Ti-45Al-5Nb + (0 - 0.5C) Sheets

    Gerling, R., Schimansky, F. P., Stark, A., BARTELS, A., Kestler, H., Cha, L., Scheu, C. & Clemens, H., 2008, In: Intermetallics. 16, p. 689-697

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H. & Scheu, C., 2008, Neutrons and Synchrotron Radiation in Engineering Materials Science from Fundamentals to Material and Component Characterization. p. 3-20

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Milestone 1.3.1 "Improved wear protection (hardness >35GPa) for TiAlN or (Al,Cr,Y)N coatings"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Milestone 1.3.2 "Oxidation protection of γ-TiAl base alloys by nanocomposite coatings (dwell time > 1000h at >= 850°C)"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Milestone 1.3.3. "Oxidation protection of γ-TiAl base alloys by nanocomposite coatings (dwell time > 1000h at >= 850°C)"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Milestone 3.2.3 "Demonstration of a self-organization process for increased mechanical strength in the coatings after exposure to thermal load during service of a coated part (for the last advanced coatings)"

    Mayrhofer, P. H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Near Conventional Forging of Titanium Aluminides

    Kremmer, S., Chladil, H., Clemens, H., Otto, A. & Güther, V., 2008, Ti-2007 Science and Technology. p. 989-992

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science

    Reimers, W. (Co-editor), Pyzalla, A. (Co-editor), Schreyer, A. (Co-editor) & Clemens, H. (Co-editor), 2008, Weinheim: Wiley-VCH .

    Research output: Book/Report › Book › Research

Previous 1...26 27 28 29 30 31 32 33 ...44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben