Chair of Physical Metallurgy (420)
Organisational unit: Chair
Research output
- 2007
- Published
Experimental Studies and Thermodynamic Simulation of Phase Transformation in High Nb Containing TiAl Based Alloys
Clemens, H., Chladil, H., Zickler, G., Takeyama, M., Kozeschnik, E., Bartels, A., Buslaps, T., Gerling, R., Kremmer, S., Yeoh, L. & Liss, K.-D., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 1131-1137Research output: Contribution to journal › Article › Research › peer-review
- Published
FEM simulation of the effect of surface roughness on nanoindentation of thin films with a spherical indenter
Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, 34th International Conference on Metallurgical Coatings and Thin Films. p. 60-60Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
„Ferritgehaltbestimmung“
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
First observation of a hexagonal close packed metastable intermetallic phase between Cu and Al bilayer films
Cha, L., Scheu, C., Richter, G., Wagner, T., Sturm, S. & Rühle, M., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 98, p. 692-699Research output: Contribution to journal › Article › Research › peer-review
- Published
Formation and modulation of an ultrafine lamellar structure in high Nb containing TiAl alloys
Cha, L., Scheu, C., Chladil, H., Bartels, A., Gerling, R. & Clemens, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Fraktographische Analysen an Laserschweißungen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von gebrochenen Kleinteilen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von Schneidelement
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von Werkzeugen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Beurteilung von Werkzeugen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Fraktographische Untersuchungen an Bauteilen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge
Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192Research output: Contribution to journal › Article › Research › peer-review
- Published
Hard and superhard TiAlBN coatings deposited by twin electron-beam evaporation
Rebholz, C., Monclus, M. A., Baker, M. A., Mayrhofer, P. H., Gibson, P. N., Leyland, A. & Matthews, A., 2007, In: Surface & coatings technology. 13, p. 6078-6083Research output: Contribution to journal › Article › Research › peer-review
- Published
Herstellung lamellarer Gefügetypen in intermetallischen TiAl-Legierungen und deren Charakterisierung
Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 430-443Research output: Contribution to journal › Article › Research › peer-review
- Published
High-temperature tribological behavior of sputtered NbNx thin films
Fontalvo, G., Terziyska, V. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1017-1022Research output: Contribution to journal › Article › Research › peer-review
- Published
Hochtemperaturuntersuchungen an Ni-Basis-Legierungen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Hochtemperaturuntersuchungen an Ni-Basis-Legierungen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Identification of low-friction and wear mechanisms for Ti-C-N coatings
Rebelo De Figueiredo, M., Neidhardt, J. & Mitterer, C., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
iffraction-based Residual Stress Analysis Applied to Problems in the Aircraft Industry
Staron, P., Cihak, U., Clemens, H., Stockinger, M., Bayraktar, F. S., Kocak, M. & Schreyer, A., 2007, In: Advanced engineering materials. 9, p. 627-638Research output: Contribution to journal › Article › Research › peer-review
- Published
Impact of Yttrium on structure and mechanical properties of Cr-Al-N thin films
Rovere, F. & Mayrhofer, P. H., 2007, In: Journal of vacuum science & technology / A (JVST). 25, p. 1336-1340Research output: Contribution to journal › Article › Research › peer-review
- Published
“Influence of bainitic and martensitic microstructures on the mechanical properties of hot-work tool steels”
Mayer, S., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Influence of C and Nb concentrations on the high temperature deformation of Nb-rich gamma-TiAl alloys
Stark, A., Bartels, A., Schimansky, F.-P., Gerling, R. & Clemens, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Influence of high-temperature oxide formation on the tribological behaviour of TiN and VN coatings
Fateh, N., Fontalvo, G., Gassner, G. & Mitterer, C., 2007, In: Wear. 262, p. 1152-1158Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel
Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ Small-Angle X-ray scattering during Scorption in Silica Possessing an Ordered Hierarchical Mesopore Architecture
Smarsly, B., Zickler, G., Sel, O., Kaper, H., Adelhelm, P. & Funari, S. S., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
In situ X-ray diffraction investigation of thermal decomposition of wood cellulose
Zickler, G., Wagermaier, W., Funari, S. S., Burghammer, M. & Paris, O., 2007, In: Journal of Analytical and Applied Pyrolysis. 80, p. 134-140Research output: Contribution to journal › Article › Research › peer-review
- Published
In-situ X-ray Diffraction Investigation of thermal Decomposition of Wood Cellulose
Zickler, G., Wagermaier, W., Funari, S. S., Burghammer, M. & Paris, O., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Instrumentierte Kerbschlagbiegeversuche
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
International Symposium on Reactive Sputter Depositon - Abstractband
Mitterer, C. (Editor) & Mayrhofer, P. H. (Editor), 2007, Leoben, Department Metallkunde und Werkstoffprüfung: Eigenverlag.Research output: Book/Report › Anthology › Research
- Published
Kerbschlagbiegeversuche an einem Kettenwerkstoff
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
kriecheigenschaften der beta-erstarrenden gamma-Tial Basislegierung TNM-B1
Chladil, H. & Clemens, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Kriechen von Warmarbeitsstählen
Stergar, E., Panzenböck, M. & Leitner, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Magnetron Sputtered Intermetallic Al2Au and Al-Zr-Y Coatings for the Oxidation Protection of y-TiAl,
Moser, M., Mayrhofer, P. H. & Braun, R., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II05-08-II05-14Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Mechanical and tribological properties of CrN coatings deposited by a simultaneous HIPIMS/UBM sputtering process
Paulitsch, J., Mayrhofer, P. H. & Mitterer, C., 2007, 50th Annual Technical Conference Proceedings. SVC, p. 150-154Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Metallographische Beurteilung hochfester Drähte
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Bohrschäften
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Halbzeugen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Halbzeugen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Heizschlangenrohren
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 3
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 4
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 5
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 6
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Metallographische Beurteilung von Schweißungen - 7
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
- Published
Microstructure and mechancial properties of sputtered intermetallic Al-Au coatings
Moser, M., Mayrhofer, P. H., Ross, I. M. & Rainforth, W. M., 2007, In: Journal of applied physics. 102, p. 023523-1-023523-6Research output: Contribution to journal › Article › Research › peer-review
- Published
Milestone 1.4.2: Understanding of the role of different alloying additions in promoting formation of a protective oxide scale
Mayrhofer, P. H., Rovere, F., Moser, M. & Braun, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Milestone 3.2.1: Demonstration of a self-organization process for increased mechanical strength in the coatings after exposure to thermal load during service of a coated part (for the first series of coatings)
Mayrhofer, P. H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Milestone 3.2.2: Explanation of mechanical deformation mechanisms of the coatings in a materials science and advanced surface engineering context (for the first series of coatings)
Mayrhofer, P. H. & Hultmann, L., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Nanocomposite CrC/a-C:H coatings for automative applications
Mitterer, C., Gassner, G., Scheu, C., Lechtahler, M., Mayrhofer, P. H. & Daniel, R., 2007, 34 th International Conference on Metallurgical Coatings and Thin Films. p. 113-113Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Nanoindentation characterization of a Cr/CrN dual layer coating system
Daniel, R. & Mitterer, C., 2007, 3rd International Indentation Workshop. p. 36-36Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
NANOSURFACEENGINEERING CENTER - Planungsarbeiten für den Aufbau und die Laborausstattung
Mitterer, C. & Waldhauser, W., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
NAPILIS Delivery Report D34 Optimized Coatings
Mitterer, C., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
New high-performance CVD oxide-based coatings - 1
Mitterer, C. & Hochauer, D., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
New high-performance CVD oxide-based coatings - 2
Mitterer, C. & Hochauer, D., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
New high-performance CVD oxide-based coatings - 3+4
Mitterer, C. & Hochauer, D., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Niedrigreibungsschichten für Hochleistungskomponenten in der Antriebs- und Motorentechnik
Mitterer, C., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Nonreactive Spreading at High Temperature: Molten Metals and Oxides on Molybdenum
Saiz, E., Tomsia, A. P., Rauch, M., Scheu, C., Rühle, M., Benhassine, M., Seveno, D., Coninck, J. D. & Lopez-Esteban, S., 2007, In: Physical review : E, Statistical, nonlinear and soft matter physics. p. 041602-1-041602-15Research output: Contribution to journal › Article › Research › peer-review
- Published
n-situ High Energy X-ray Diffraction Study and Quantitative Phase Analysis in the alpha + gamma Phase Field of Titanium Aluminides
Yeoh, L., Liss, K.-D., Bartels, A., Chladil, H., Avdeev, M., Clemens, H., Gerling, R. & Buslaps, T., 2007, In: Scripta materialia. 57, p. 1145-1148Research output: Contribution to journal › Article › Research › peer-review
- Published
Numerische Modellierung der Schicht/Substrat Wechselwirkung bei zyklisch thermisch beanspruchten beschichteten Werkzeugstahloberflächen
Huber, C., 2007Research output: Thesis › Diploma Thesis
- Published
n-vitro Interactions of Human Chondrocytes, Mesenchymal Stem Cells and of Mouse Macrophages with Phospholipid-covered Metallic Implant Materials
Willumeit, R., Schlossig, M., Clemens, H. & Feyerabend, F., 2007, In: European cells & materials. 13, p. 11-25Research output: Contribution to journal › Article › Research › peer-review
- Published
Oberflächenbeurteilungen von Bauteilen - 2
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Oberflächenbeurteilung von Bauteilen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS
Leitner, H., Clemens, H., Johann, A., Frederik, D. & Staron, P., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1093-1103Research output: Contribution to journal › Article › Research › peer-review
- Published
On the Influence of Nb on the transition Temperatures of Titanium Aluminides
Chladil, H., Clemens, H., Takeyama, M., Kozeschnik, E., Bartels, A., Gerling, R. & Kremmer, S., 2007, MRS Fall Meeting 2006. Materials Research Society : MRS, p. II07-03-II07-09Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Optimierung des Aufkohlprozesses von Schneeketten
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Oxidation of arc evaporated Al1-xCrxN coatings
Reiter, A., Mitterer, C. & Sartory, B., 2007, In: Journal of vacuum science & technology / A (JVST). A 25, p. 711-720Research output: Contribution to journal › Article › Research › peer-review
- Published
Oxidation of vanadium nitride and titanium nitride coatings
Glaser, A., Surnev, S., Netzer, F. P., Fateh, N., Fontalvo, G. & Mitterer, C., 2007, In: Surface Science. 601, p. 1153-1159Research output: Contribution to journal › Article › Research › peer-review
- Published
Oxidation Tuning of Cr-Al-N by yttrium
Rovere, F., Mayrhofer, P. H. & Braun, R., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Oxidation Tuning of Cr-Al-N by yttrium
Rovere, F. & Mayrhofer, P. H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Oxide-based Coatings Deposited by Thermal CVD
Czettl, C., 2007, 82 p.Research output: Thesis › Diploma Thesis
- Published
Phase Transitions and Recrystallization in a Ti-46at%Al-9at%Nb Alloy as Observed by In-Situ High-energy X-ray Diffraction
Liss, K.-D., Clemens, H., Bartels, A., Stark, A. & Buslaps, T., 2007, MRS Fall Meeting. Materials Research Society : MRS, p. II05-07-II05-13Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
PM mit HM-ähnlichen Eigenschaften bzw. Werkzeugstähle mit höchster Festigkeit und Zähigkeit
Zuber, M. & Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Pore lattice deformation in ordered mesoporous silica studied by in-situ small-angle X-ray diffraction
Zickler, G., Jähnert, S., Funari, S. S., Findenegg, G. H. & Paris, O., 2007, In: Journal of applied crystallography. 40, p. s522-s526Research output: Contribution to journal › Article › Research › peer-review
- Published
Precipitation reactions during the early stages of aging in a Ni and Al alloyed martensitic medium carbon steel
Erlach, S. D., Danoix, F., Leitner, H., Auger, P., Siller, I. & Clemens, H., 2007, In: Surface and interface analysis. 39, p. 213-220Research output: Contribution to journal › Article › Research › peer-review
- Published
Prüfbericht Dilatometer
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Qualitätsuntersuchungen an Wärmetauscherrohren
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
“Report on Thermodynamic Calculations”
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
“Report on Thermodynamic Calculations - 2"
Leitner, H., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
RPC NANOCOAT 24 Months Report
Mitterer, C. & Ebner, R., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
SANS Characterisation of nm-sized Precipitates in a Martensitic Fe-Co-Mo Alloy
Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H., Scheu, C. & Clemens, H., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Schadenanalyse an einem gebarsteten Rohr
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schäden an Haushaltsinstallationen
Panzenböck, M., 2007.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Schadensanalyse an Drehstäben
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an eine Ladebordwand
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an einer Motorradaufhängung
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an einer Radaufhängung
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an Hämmern
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an Schrauben
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an Sieben
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an Solaranlagen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse an Zuglaschen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schadensanalyse Umformwerkzeug
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
- Published
Schweißnahtprüfung an Schienensträngen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Schwingungsrisskorrosion an austenitischen Stählen
Panzenböck, M., 2007Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Semi-quantitative chemical analysis of hard coatings by Raman micro-spectroscopy: the aluminium chromium nitride system as an example
Kaindl, R., Sartory, B., Neidhardt, J., Franz, R., Reiter, A., Polcik, P., Tessandri, R. & Mitterer, C., 2007, In: Analytical and bioanalytical chemistry. 389, p. 1569-1576Research output: Contribution to journal › Article › Research › peer-review
- Published
Single-crystal growth of NaCl-structure Al-Cr-N thin films on MgO(001) by magnetron sputter epitaxy
Willmann, H., Beckers, M., Giuliani, F., Birch, J., Mayrhofer, P. H., Mitterer, C. & Hultman, L., 2007, In: Scripta materialia. 57, p. 1089-1092Research output: Contribution to journal › Article › Research › peer-review
