Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

901 - 950 out of 2,401Page size: 50

Research output

  1. 2015
  2. Published

    Recycling von Reststoffen aus der Kupfer-Metallurgie

    Steinacker, S., 19 May 2015.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Rapid artificial aging of Al-Mg-Si alloys

    Werinos, M. & Antrekowitsch, H., 15 May 2015.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Werkstoffentwicklung von Cu-Basislegierungen

    Angerer, T., 12 May 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten von Aluminiumlegierungen

    Werinos, M. & Antrekowitsch, H., 11 May 2015.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Optimierung von Aluminiumknetlegierungen der 7xxx-Serie

    Kolb, G., 11 May 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 4 May 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  8. Published

    Behandlung und Verwertung der Reststoffe aus der Kupfer-Metallurgie

    Steinacker, S., Rumpold, R. & Antrekowitsch, J., 4 May 2015, Mineralische Nebenprodukte und Abfälle 2: Aschen, Schlacken, Stäube und Baurestmassen. Neuruppin

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Agglomeration und Verwertung aluminiumhaltiger Reststoffe

    Zöhrer, M. & Angerer, T., May 2015.

    Research output: Contribution to conference › Poster › Transfer

  10. Published

    Aktivitäten Stefan Steinlechner NEM

    Steinlechner, S., May 2015.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Anwendung selektiver Metallbadprozesse zur Multimetallrückgewinnung aus komplexen Reststoffen

    Wegscheider, S., May 2015.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Der 2sDR Prozess - Eine zukunftsorientierte Möglichkeit zur Aufarbeitung von EAF-Stäuben

    Wegscheider, S., May 2015.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Einführung in die Metallurgie

    Antrekowitsch, H., 30 Apr 2015.

    Research output: Contribution to conference › Presentation › Education › peer-review

  14. Published

    Prozessentwicklung zur metallurgischen Verwertung von Elektroaltgeräten

    Sorger, C., 25 Apr 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  15. Published

    Product upgrade of Waelz oxide using an altenative method

    Rösler, G. & Antrekowitsch, J., 9 Apr 2015. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T. & Antrekowitsch, H., 31 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Microstructural evolution and barrier layer dissolution during brazing of high strength brazing sheets

    Kremmer, T. & Antrekowitsch, H., 21 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 19 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Recycling von Produktionsrückständen aus der metallverarbeitenden Industrie

    Zöhrer, M., 17 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Example of the Refractory Corrosion Test Work with Nickel Matte

    Gregurek, D., Ressler, A., Spanring, A. & Pichler, C., 15 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 1/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Mar 2015, In: Metall. 3, p. 82-87 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Recycling in der Automobilindustrie: Ist damit eine Rohstoffversorgung zukünftig gesichert?

    Antrekowitsch, H., 25 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Quench-induced precipitates in Al-Si alloys: Calorimetric determination of solute content and characterisation of microstructure

    Schumacher, P., Pogatscher, S., Starink, M. J., Schick, C., Mohles, V. & Milkereit, B., 20 Feb 2015, In: Thermochimica Acta. 602, p. 63-73

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Aluminiumrecycling: Verfahren und ökologische sowie rechtliche Aspekte

    Bolitschek, J., 16 Feb 2015, 36 p.

    Research output: Book/Report › Other report › Research

  25. Published

    Stabilisierungsbehandlung und Verstrecken in 6xxx-Blechwerkstoffen sowie Einfluss von Mikrolegierungselementen auf das Ausscheidungsverhalten

    Werinos, M. & Antrekowitsch, H., 9 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Potential of a Hydrometallurgical Recycling Process for Catalysts to Cover the Demand for Critical Metals, Like PGMs and Cerium

    Steinlechner, S., Feb 2015, In: JOM. 67, 2, p. 406-411 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Aluminiumrecycling: Verfahren und ökologische sowie rechtliche Aspekte

    Bolitschek, J., 15 Jan 2015.

    Research output: Contribution to conference › Presentation › Research

  28. Published

    AFM and KPFM investigation of high strength aluminium brazing sheets

    Huszar, M., Kremmer, T., Kratzer, M., Oberhauser, P., Antrekowitsch, H. & Teichert, C., 2015.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Agglomeration und Recycling metallhaltiger Reststoffe

    Zöhrer, M., 2015.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Alkalischer Schmelzaufschluss von Leuchtstofffraktionen zur Wiedergewinnung Seltener Erden

    Gstettner, G., 2015

    Research output: Thesis › Master's Thesis

  31. Published

    Alloying Elements and Heat Treatment on Wrought 7xxx Aluminium Alloys

    Kolb, G. & Antrekowitsch, H., 2015.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Atom Probe Tomography of Early Stage Clustering in Aluminum Alloys

    Pogatscher, S. & Gerstl, S. S. A., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Auswirkung von Elementvariationen auf die Wärmebehandlung und Eloxierbarkeit von EN AW 7075

    Waldsam, F., 2015

    Research output: Thesis › Master's Thesis

  34. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  35. Published

    Challenges in the field of extractive metallurgy of technological metals

    Luidold, S., 2015, p. 747-758. 12 p.

    Research output: Contribution to conference › Paper › peer-review

  36. Published

    Charakterisierung der Umformbarkeit von 6xxx-Legierungen

    Bolitschek, J., 2015

    Research output: Thesis › Master's Thesis

  37. Published

    Chemische Entschichtung von Hartmetallen

    Kücher, G., 2015

    Research output: Thesis › Master's Thesis

  38. Published

    Christian Doppler Labor für Extraktive Metallurgie von Technologiemetallen

    Luidold, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2015.

    Research output: Contribution to conference › Abstract › peer-review

  40. Published

    Concepts to optimize aging of Al-Mg-Si alloys

    Pogatscher, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  41. Published

    Control of precipitation during heat treatments based on DSC experiments

    Schumacher, P., Pogatscher, S., Starink, M., Keßler, O., Schick, C., Mohles, V. & Milkereit, B., 2015, International Conference on Solid-Solid Phase Transformations in Inorganic Materials. Whistler, Canada, p. 699 706 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Copper Networkingin South East Europe - Potentials and Challenges

    Antrekowitsch, J., 2015.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Editorial

    Luidold, S., 2015, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 68.2015, 1, p. 1-2 2 p.

    Research output: Contribution to journal › Editorial

  44. Published

    Einfluss von Legierungselementen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

    Scheiber, S., 2015

    Research output: Thesis › Master's Thesis

  45. Published

    Einfluss von Wärmebehandlungen auf das Eigenschaftsprofil von Aluminium-Knetlegierungen der 7xxx-Serie

    Alf, D., 2015

    Research output: Thesis › Master's Thesis

  46. Published

    Endbericht - Forschungsprojekt BioZInGa

    Steinlechner, S., 2015

    Research output: Book/Report › Commissioned report › Research

  47. Published

    Entwicklung eines Recyclingprozesses zur simultanen Rückgewinnung von Wertmetallen aus Reststoffen der Blei- und Zinkindustrie

    Unger, A., 2015

    Research output: Thesis › Doctoral Thesis

  48. Published

    Extraction of lanthanides from spent polishing agent

    Luidold, S., 2015, Rare Earths Industry: Technological, Economic, and Environmental Implications. 1 ed. Elsevier, p. 215 228 p. 14

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    FFG Endbericht - Optimierung der Eigenschaften plattierter 7xxx-Werkstoffe

    Kremmer, T. & Antrekowitsch, H., 2015

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    High Temperature Oxidation of Steel, Aluminum and Copper Alloys under the Influence of a Sustainable Energy-Efficient Combustion in Industrial Furnaces

    Sobotka, C., 2015

    Research output: Thesis › Doctoral Thesis

  51. Published

    HSC-Simulation des Peirce-Smith-Konverters

    Sorger, C., 2015

    Research output: Book/Report › Commissioned report › Research

Previous 1...15 16 17 18 19 20 21 22 ...49 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204