Chair of Mechanical Engineering (140)

Organisational unit: Chair

951 - 1000 out of 1,376Page size: 50

Research output

  1. 2010
  2. Published

    ENHANCED FATIGUE ANALYSIS – INCORPORATING DOWNSTREAM MANUFACTURING PROCESSES

    Eichlseder, W., 2010, In: Materiali in tehnologije = Materials and technology. 44, 4, p. 185-192

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Entwicklung eines Inhomogenitätsparameters für die Gefügeauswertung

    Maderbacher, H., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Evaluation of fillet weld properties in dependence of weld manufacturing parameters

    Fössl, T., Leitner, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symposium. p. 78-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds

    Godor, I., Major, Z., Grün, F. & Vezer, S., 2010, In: Journal of tribology (Transactions of the ASME). p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Fatigue investigations on a forged "W-Link" to improve the transferability of specimen results to real components

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, In: FATIGUE 2010. 2, 1, p. 2277-2285

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Fatigue-Proof and Damage Tolerant Lightweight Design of Ti-6Al-4V Forgings

    Oberwinkler, B., 2010, 213 p.

    Research output: Thesis › Doctoral Thesis

  8. Published

    „Fertigungsbedingte Einflüsse auf die Schwingfestigkeit von Al- Gussbauteilen“

    Eichlseder, W., Powazka, D. & Leitner, H., 2010, In: Giesserei. 07, p. 32-39

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Fretting Wear and Fretting Fatigue of Ti-6Al-4V

    Juric, J., 2010

    Research output: Thesis › Diploma Thesis

  10. Published

    Herstellen von Planetenzahnrädern mittels Kaltmassivumformung

    Haberer, C. & Dietrich, A., 2010, VDI Jahrestreffen der Kaltmassivumformer. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Importance of local microstructure for damage tolerant light weight design of Ti-6Al-4V forgings

    Oberwinkler, B., Riedler, M. & Eichlseder, W., 2010, In: International Journal of Fatigue. 32, p. 808-814

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Importance of Residual Stresses and Surface Roughness Regarding Fatigue of Titanium Forgings

    Oberwinkler, B., Riedler, M. & Eichlseder, W., 2010, In: Journal of ASTM international. 7

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Influence of Local Microstructure on the Fatigue Behaviour of a Titanium Base Alloy

    Eichlseder, W. & Oberwinkler, B., 2010, Konferenz Multiscale effects in fatigue of metals, Euromech 505,.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influences of pores and segregations in cast and forgend components on the fatigue life

    Eichlseder, W., Oberwinkler, C. & Fröschl, J., 2010, 29emes Journees de Printemps "Influence des procedes sur la tenue en fatigue - Role des defauts - JP 2010. p. 71-78

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Investigation of operating ranges for lubricated large-area contacts using ring-on-disc test configuration

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 70-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Investigation of tribological damage mechanisms of various slide bearing materials used in medium speed and low speed diesel engines on the microscopic and macroscopic scale

    Offenbecher, M., Gärtner, W., Gumpoldsberger, R., Aufischer, R., Grün, F. & Godor, I., 2010, Proceedings of CIMAC Congress 2010. p. 276/1-276/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Investigations to improve the transferability of specimen results by real component

    Tan, W., Stoschka, M., Maderbacher, H., Riedler, M., Eichlseder, W. & Romagnoli, F., 2010, In: Materials engineering. 17, 3, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Investigations to improve the transferability of specimen results by the new component specimen "W-Link"

    Tan, W., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Investigations to improve the transferability of specimen results by the new component specimen "W-Link"

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2010, 27th Danubia-Adria Symbosium on Experimental Methods in Solid Mechanics. p. 0-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Lebensdaueroptimierung eines Haspeldorns auf Basis von Prozesssimulation

    Mairhofer, M., 2010

    Research output: Thesis › Diploma Thesis

  21. Published

    Life fatigue prediction of different plasma nitrided and case hardened specimens under rolling contact loading

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Eichlseder, W. & Dietrich, A., 2010, Nitrieren und Nitrocarburieren. p. 140-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Lifetime evaluation of hot forged aerospace components by linking microstructural evolution and fatigue behaviour

    Maderbacher, H., Christiner, T., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 2269-2276

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Lifetime Evaluation of Hot Forged Aerospace Components by Linking Microstructural Evolution and Fatigue Behaviour

    Maderbacher, H., 2010, Fatigue 2010 Book of Abstracts. p. 297-297

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Liftime Calculation of thermo-Mechanically Loaded Materials (Al, Cu, Ni, and Fe Alloys) Based un Empirical Methods

    Köberl, H., Winter, G. & Eichlseder, W., 2010, In: Journal of ASTM international. Vol. 8, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Methodenfindung zur Beschreibung der Vorgänge im Kontaktbereich bei Composite-Werkstoffen unter tribologischer Beanspruchung

    Sailer, W., 2010

    Research output: Thesis › Diploma Thesis

  26. Published

    Methode zur Optimierung der Zahnfußtragfähigkeit einsatzgehärteter Zahnräder

    Haberer, C., 2010

    Research output: Thesis › Doctoral Thesis

  27. Published

    Model scale generation and microscopic characterisation of tribofilms formed on Fe and Cu alloys

    Grün, F., Godor, I., Javidi, A., Pondicherry, K., Offenbecher, M. & Bertram, R., 2010, In: Lubrication science. 22, 6-7, p. 237-250

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Numerical approach to fretting wear

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Water Jetting. p. 269-273

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    NUMERISCHER UND EXPERIMENTELLER ANSATZ ZUR FRETTINGBEWERTUNG: MATERIALABTRAG UND ERMÜDUNG

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Reibung, Schmierung und Verschleiß. p. 50/1-50/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Optimierung des passiven Fahrschwingungstilgers eines Radladers

    Steiner, P., 2010

    Research output: Thesis › Diploma Thesis

  31. Published

    Rechnerische und experimentelle Untersuchung der Schmierfilmbildung in geschmierten Tribokontakten

    Krampl, H., 2010

    Research output: Thesis › Diploma Thesis

  32. Published

    Rolling contact fatigue prediction of different plasma nitrided and case hardened specimens

    Eichlseder, W., Trausmuth, A., Godor, I. & Stoschka, M., 2010, Mechanical Engineering. p. 24-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Schädigungsäquivalente Prüfmethodik für das Tribosystem Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: Tribologie und Schmierungstechnik. 57, p. 37-42

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    .:“Schädigungstolerante Auslegung von Aluminium-Druckgusskomponenten“

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2010, In: MP materials testing : Materialprüfung . 52, p. 513-519

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Steigerung der Schwingfestigkeit geschweißter Strukturen durch die Pneumatic Impact Technology (PIT)

    Leitner, M., Fössl, T. & Stoschka, M., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    The role of sampling position on fatigue of austempered ductile iron

    Wohlfahrt, M., Oberwinkler, C., Tunzini, S., Rauscher, A., de la Prida Caballero, R. & Eichlseder, W., 2010, In: Procedia Engineering. 2, p. 1337-1341

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    TRAGFÄHIGKEITSUNTERSUCHUNGEN VON UNTERSCHIEDLICH GEHÄRTETEN WERKSTOFFE UNTER KONTAKTBEANSPRUCHUNG

    Trausmuth, A., Godor, I., Stoschka, M., Eichlseder, W. & Dietrich, A., 2010, Wettbewerbsvorsprung durch tribologische Innovation. p. 57-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Tribological behaviour of unfilled and filled TPU materials

    Godor, I., Schiffer, J., Grün, F., Schwarz, T. & Major, Z., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Tribologische Funktionsweise von ungefüllten und gefüllten TPU-Dichtungsmaterialien - ein Erfahrungsbericht

    Godor, I., Schiffer, J., Major, Z., Grün, F. & Schwarz, T., 2010, In: Tribologie und Schmierungstechnik. 57, p. 21-27

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Tribometrie von Grenzschichten in großflächigen Kontakten - Methodik zur Erzeugung von Tribofilmen und begleitende Analytik

    Grün, F., Godor, I., Javidi, A. & Pondicherry, K., 2010, In: Tribologie und Schmierungstechnik. 57, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  41. 2009
  42. Published

    SAMPLE ANALYSIS SYSTEM

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 5 Mar 2009, Patent No. WO2009027097, Priority date 31 Aug 2007, Priority No. EP20070017095

    Research output: Patent

  43. Published

    Influence of the peening intensity on the fatigue behavior of shot peened titanium components

    Leitner, H., Oberwinkler, B., Gaenser, H. P. & Stoschka, M., 1 Jan 2009, Fatigue and Fracture Mechanics: 36th Volume. Vol. 1508 STP. p. 134-146 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Link from the microstructure to the fatigue lifteime of forged inconel 718 components

    Maderbacher, H., Gänser, H. P., Riedler, M., Stoschka, M. & Eichlseder, W., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Tribological investigation of elastomeric materials used in seal componentstle

    Gódor, I., Javidi, A., Strohhäussl, B., Summer, F. & Krampl, H., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Abschlussbericht Betriebsfestigkeit GE Jenbacher

    Köberl, H. & Gerstmayr, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Abschlussbericht Tribologie GE Jenbacher

    Schiffer, J. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Advanced titanium forged component results (design, test, analysis of W-part)

    Tan, W. & Stoschka, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Analysis and simulation of heat treatment processes for fatigue and fracture optimization of forged aircraft engine and structural parts

    Riedler, M., Stockinger, M., Stoschka, M., Oberwinkler, B., Tan, W. & Leitner, H., 2009, Aeromat2009. p. 11-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Analysis of Short Crack Growth for Two Representative Light Metals

    Oberwinkler, B., 2009, ICF12 - Supplemental Proceedings. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Analysis of Short Crack Growth for Two Representative Light Metals

    Oberwinkler, C., Oberwinkler, B. & Redik, S., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Ansätze zur Lebensdauerberechnung von kurzglasfaserverstärkten Polymeren

    Guster, C., 2009

    Research output: Thesis › Doctoral Thesis

Previous 1...16 17 18 19 20 21 22 23 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401