Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

901 - 1000 out of 1,629Page size: 100

Research output

  1. 2012
  2. Published

    Numerical simulation of crack growth in polyethylene composites by means of the cohesive zone model

    Janko, M., Ecker, W., Pinter, G. & Kolednik, O., 2012, In: Macromolecular Symposia. 311, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Optical and mechanical characterization of fluoropolymer films for pneumatic pre-stressed sun concentrators

    Hirschmann, B., Oreski, G., Resch, K. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Optische und mechanische Charakterisierung des Alterungsverhaltens von Materialien für die Anwendung in konzentrierenden Solarkollektoren

    Ottersböck, B., 2012

    Research output: Thesis › Master's Thesis

  5. Published

    Plastics Market

    Resch, K. & Wallner, G. M., 2012, Polymeric Materials for Solar Thermal Applications. p. 129-134

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. Published

    Polyamid-Folien für Skianwendungen: Einfluss von Haftvermittler und Weiterverarbeitungsschritte auf die Performance Eigenschaften

    Gloggnitzer, S., 2012

    Research output: Thesis › Master's Thesis

  7. Published

    Polymer selection and testing methodology for high demand applications under environmental conditions

    Guttmann, P., Röper, F. & Pilz, G., 2012, Polymeric Materials. p. 58-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Prüfung eines Bauteils aus CFK

    Stelzer, S., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Raman-spectroscopic investigations of polymer morphology

    Bruckmoser, K. & Resch, K., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Ramanspektroskopische Untersuchungen von Einschlüssen in PCTFE-Folien

    Bruckmoser, K., Pinter, G. & Resch, K., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Simulation des "Single Via Thermal Cycle Test" - Modellerstellung und Bestimmung der Materialeingangsparameter

    Fellner, K., 2012

    Research output: Thesis › Master's Thesis

  12. Published

    Simulation of pipe failures

    Mitev, I. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  13. Published

    Simulations and experiments of open hole tension tests - Assessment of intra-ply plasticity, damage, and localization

    Flatscher, T., Wolfahrt, M., Pinter, G. & Pettermann, H. E., 2012, In: Composites science and technology. 72, p. 1090-1095

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Study of mechanical and physico-chemical surface properties of composites and their impact on bond strengths in repair technologies

    Jölly, I., Wolfahrt, M., Wolfberger, A., Pinter, G., Kern, W. & Noisternig, J., 2012, ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials. p. 1-1 (ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Surface characterization and functionalization of composites to optimize bonded repairs for aircraft structures

    Jölly, I., Schlögl, S., Wolfahrt, M. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Temperature dependent fracture behavior of Rubbers used in the oil and gas industry

    Schrittesser, B., Pinter, G. & Major, Z., 2012, 19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012. (19th European Conference on Fracture: Fracture Mechanics for Durability, Reliability and Safety, ECF 2012).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Temperature dependent mechanical tests

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J., Voevodin, A., Resch, K. & Mayrhofer, P. H., 2012, Proceedings of Acta Materialia. p. 2091-2096

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Temperature driven evolution of thermal, electrical, and optical properties of Ti-Al-N coatings

    Rachbauer, R., Gengler, J. J., Voevodin, A. A., Resch, K. & Mayrhofer, P. H., 2012, In: Acta materialia. 60, p. 2091-2096

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Tensile tests on pipe materials

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    The influence of test frequency and eccentric crack growth on cyclic CRB tests

    Frank, A., Redhead, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Thermische und mechanische Analysen von ß-Polypropylen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Thermische und optische Untersuchungen an mit INDUCON-Verfahren gefertigten Schweißnähten

    Arbeiter, F. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Thermische Werkstoff-Charakterisierung von Spritzguss-Filterteilen aus PA6

    Pilz, G. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Thermotropic glazings for overheating protection

    Weber, A. & Resch, K., 2012, In: Energy Procedia. 30, p. 471-477

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Thermotropic Layers for Overheating Protection of all-Polymeric Flat Plate Solar Collectors

    Resch, K., Hausner, R., Wallner, G. M. & Lang, R., 2012, Polymeric Materials for Solar Thermal Applications. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Untersuchungen von PMMA-Lichteinhausungen

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Werkstoffoptimierung für serienmäßige RTM-Strukturbauteile

    Loike, S., 2012, 83 p.

    Research output: Thesis › Master's Thesis

  29. Published

    Zugprüfungen an Folien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. 2011
  31. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 10 Nov 2011.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Mode I Delamination Fatigue Crack Growth In Unidirectional Fibre Reinforced Composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 11 Sept 2011.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Delamination resistance of advanced fiber-reinforced polymer-matrix laminates under fatigue loading: Approaches for Mode II and Mixed Mode I/II testing

    Brunner, A., Stelzer, S., Dell'Anno, G., Pinter, G. & Terrasi, G. P., 5 Sept 2011.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Mode I Delamination Fatigue Crack Growth In Unidirectional Fibre Reinforced Composites: Development Of A Standardized Test Procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 15 Apr 2011.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 13 Apr 2011, Proc. 11th International Conference on Interfacial Phenomena on Composite Materials, Cambridge, UK.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Accelerated investigation of the influence of aggressive media on the resistance to slow crack growth of polyethylene for geomembrane applications

    Redhead, A., Pinter, G. & Frank, A., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Analyse zweier Spritzgussteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Analyse zweier Spritzgussteile II

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011, In: Engineering Fracture Mechanics. 78, p. 3049-3058

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. Published

    Assessment of contact pressure and sliding velocity on the Tribological Performance of TPU Seal Materials for the Establishment of a Rating System

    Jölly, I., 2011, 181 p.

    Research output: Thesis › Master's Thesis

  42. Published

    Basischarakterisierung einer Polyethylen-Rohrummantelung

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Bewitterungsuntersuchungen an PMMA-Linsen

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Characterization of crack initiation and slow crack growth in polyethy-lene with cyclic cracked round bar tests

    Frank, A., Redhead, A., Kapur, M., Chang, D., Schramm, D., Bensason, S. & Pinter, G., 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 2214-2219 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Characterization of Crack initiation and Slow Crack Growth in Polyethylene with Cyclic Cracked Round Bar Tests

    Frank, A., Redhead, A., Kapur, M., Chang, D., Schramm, D., Pinter, G. & Bensason, S., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 2214-2219

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Comparative study of the temperature dependent delamination behavior of FOUR solar cell encapsulants to glass and backsheet-laminate

    Oreski, G. & Pinter, G., 2011, 26th European Photovoltaic Solar Energy Conference and Exhibition (26th EU PVSEC). p. 4-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Development of an instrumented autoclave for rapid gas decompression experiments

    Major, Z., Schrittesser, B. & Pinter, G., 2011, Tagung „Innovation Messtechnik“. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Durchstoßversuch an unterschiedlichen Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Dynamisch Mechanische Analyse an einem TPE Werkstoff

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Dynamisch-mechanische Analyse an Tennissaiten

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Dynamisch mechanische Untersuchungen an PTFE Werkstoffen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Effect of the process parameter yarn width on the mechanical and fatigue behaviour of braided composite materials

    Wolfahrt, M., Zaremba, S., Reden von, T. & Pinter, G., 2011, of the 16th International Conference on Composite Structures (ICCS16). p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Effects of the Processing History on the Crack Kinetics in a Polyethylene Pipe Grade

    Redhead, A., Frank, A. & Pinter, G., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 1414-1418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Einfluss der Faserarchitektur auf die mechanischen Eigenschaften und die Schadenstolerenz von Geflechtlaminaten

    Berger, I., Pinter, G. & Wolfahrt, M., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 187-181

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Einfluss von Defekten auf das Langzeitermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  57. Published

    Einfluss von Defekten auf das Langzeit Ermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 169-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    E-Muffen aus PE 100-RC bieten neue Möglichkeiten

    Haager, M., Brunbauer, J. & Carbon, R., 2011, In: Joining plastics=Fügen von Kunststoffen. 5, 3, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Entwicklung einer In-Situ-Permeations-Mess-Apparatur für die Detektion von flüchtigen Kohlenwasserstoffen und die Messung der Permeationsrate an thermoplastischen Kunststoffrohren

    Bodor, C., 2011

    Research output: Thesis › Master's Thesis

  60. Published

    Ermittlung der HDT Formbeständigkeitstemperatur an 5 Harzwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Experimental and numerical characterization of the fretting fatigue behavior of elastomers

    Vezer, S. T., 2011, 158 p.

    Research output: Thesis › Doctoral Thesis

  62. Published

    Heizwendelschweißmuffen aus PE 100-RC Optimiertes Langzeitverhalten durch verbesserte Werkstoffe

    Haager, M., Brunbauer, J. & Carbon, R., 2011, In: 3 R. 4/5, p. 308-313

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Impact of chemical and physical properties of H-NBR based elastomers on the rapid gas decompression performance

    Schrittesser, B. & Pinter, G., 2011,

    Proceedings of High Performance Thermoplastics & Composites for Oil and Gas Applications

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Influence of the beadless welding technology on the properties of PP-R and PVDF joints

    Brunbauer, J., 2011, 104 p.

    Research output: Thesis › Master's Thesis

  65. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei -20 °C

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  66. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei Raumtemperatur

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Investigation of the chemical resistance and the material aging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Paper › peer-review

  68. Published

    Investigation of the chemical resistance and the material anging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011, SPE-EUROTEC 2011. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Kerbschlaguntersuchungen an ABS-Compounds

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Kerbschlaguntersuchungen an Erdölcutingproben

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  72. Published

    Mechanische Eigenschaften Nanopartikel-verstärkter Epoxidharze

    Pilz, G. & Stadelmann, S., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 181-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Mechanische Prüfungen an ABS-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  74. Published

    Mechanische Prüfungen an unterschiedlichen Polypropylentypen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  75. Published

    Mechanische und thermo-mechanische Untersuchungen an PIM Feedstock-Grünteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Mechanische Untersuchungen an mineralisch gefüllten Polypropylen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Medienbeständigkeit von Polyethylen für Langzeitanwendungen

    Wetscher, S., 2011

    Research output: Thesis › Master's Thesis

  78. Published

    Microstructure optimization and structure-property relationships of thermoplastic nanocomposites

    Feuchter, M., 2011, 140 p.

    Research output: Thesis › Doctoral Thesis

  79. Published

    Mikroskopie an Bruchflächen mehrerer Bauteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  80. Published

    Morphologische Charakterisierung von extrudierten Polyethylen/Polypropylen-Platten

    Sinic, J., 2011

    Research output: Thesis › Master's Thesis

  81. Published

    Morphologische Charakterisierung von Stumpfschweißverbindungen in Polyethylen-Rohrleitungen

    Arbeiter, F., 2011

    Research output: Thesis › Master's Thesis

  82. Published

    Novel Concepts for the Characterization of the Delamination Resistance of Fiber Reinforced Polymer Laminates

    Singer, G., 2011, 98 p.

    Research output: Thesis › Master's Thesis

  83. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Optimierte Auslegung durch druckabhängige nichtlinear viskoelastische Modellierung

    Tscharnuter, D., Gastl, S. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 142-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Optimierte RTM-Struktur-Bauteile für automotive Anwendungen

    Pilz, G., Loike, S. & Lammer, H., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 175-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Physikalische Prüfungen von Elastomer-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Potentiale von Faserverbundwerkstoffen für den Einsatz als Rotorkappenwerkstoff in Turbogeneratoren

    Endlweber, R., 2011, 72 p.

    Research output: Thesis › Master's Thesis

  88. Published

    Ramanspektroskopische Untersuchungen von Rohroberflächen

    Bruckmoser, K., Pinter, G. & Resch, K., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Schlagbiegeuntersuchungen an gefüllten Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  91. Published

    Smart Windows - Smart Collectors: Entwicklung und Charakterisierung von Überhitzungsschutzverglasungen für Gebäudeverglasungen und thermische Solarkollektoren

    Resch, K. & Weber, A., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 429-433

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Statische Zugversuche an Compositerohren

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Thermo-kalorimetrische Untersuchung an Duromerwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  94. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau - Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D. & Tscharnuter, D., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Thermotropic glazings for overheating protection applications: Tuning the light-shielding efficiency by systematic material prei-selection and formulation

    Weber, A. & Resch, K., 2011, 6th Energy Forum "Solar Buliding Skins". p. 73-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Thermotropic glazings for overheating protection of solar collectors: structure-property relationships

    Weber, A., Resch, K. & Schmid, A., 2011, 12th Experts Meeting IEA SHC Task 39. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Uniaxial nonlinear viscoelastic viscoplastic modeling of polypropylene

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: Mechanics of time-dependent materials. 16, 3, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Untersuchung der Dispergierung von dem Arzneimittel Paracetamol in einer Kunststoffmatrix

    Resch, K. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  101. Published

    Untersuchung des Haftungsverhaltens von PV-Einbettfolien zu Glas und zum Rückseitenlaminat

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Vergleichende mechanisch und thermomechanische Untersuchungen an Vitonmembranen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101