Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

801 - 900 out of 1,629Page size: 100

Research output

  1. 2013
  2. Published

    Bestimmung der Wasseraufnahme von PBT-Bauteilen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Bestimmung von Qualitätskriterien für Verpackungsfolien

    Feuchter, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Bruchmechanik an Grenzflächen - Lebensdauervorhersagekonzepte für mehrschichtige Kunststoffkomponenten

    Arbeiter, F., Pinter, G., Lach, R., Grellmann, W. & Hutar, P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 228-238

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Comparative Spectroscopic Study of Aged Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, 19th European Symposium on Polymer Spectroscopy - ESOPS19. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., Pinter, G. & Frank, A., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 62-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Comparison of crack growth kinetics in different polypropylene grades using linear elastic fracture mechanics

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Concept for characterisation of fatigue damage and failure of laminated composites by cycle-and stress-dependent stiffness properties

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Concept for evaluating stiffness degradation of composite materials during fatigue life

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Cure analysis of pultrusion epoxy resin

    Kastanis, D., Feuchter, M., Moser, A., Wolfahrt, M., Pinter, G. & Schledjewski, R., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Deformation and Fracture Behavior of Semi-Crystalline Thermoplastics Used for Rolling Applications

    Berer, M., 2013, 162 p.

    Research output: Thesis › Doctoral Thesis

  12. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Berer, M. & Pinter, G., 2013, In: Polymer Testing. 32, p. 870-879

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Dynamisch Mechanische Untersuchung (DMA) an VE-GF

    Guttmann, P. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Effect of formulation and processing conditions on light shielding efficiency of thermotropic systems with fixed domains based on UV curing acrylate resins

    Weber, A., Schlögl, S. & Resch, K., 2013, In: Journal of Applied Polymer Science. 130, p. 3299-3310

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Elevated Pitting Wear of injection molded PEEK rolls

    Berer, M., Major, Z. & Pinter, G., 2013, In: Wear. 297, p. 1052-1063

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Ermüdungsverhalten von glasfaserverstärkten Polyurethanharz-Laminaten

    Buchsteiner, T., 2013

    Research output: Thesis › Master's Thesis

  17. Published

    Evaluation of Raman Spectroscopy to Characterize Heat Ageing in Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, The Proceedings of The Austrian Slovenian Polymer Meeting 2013. p. 79-80

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Experimentelle Basischarakterisierung einer neuen Fügetechnologie mit erhöhter Schadenstoleranz für endlosfaserverstärkte Kunststoffe

    Unger, T., 2013, 74 p.

    Research output: Thesis › Master's Thesis

  19. Published

    Fatigue properties of polyurethane based high performance composites

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, ICSAAM 2013 Proceedings. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    IMPACT OF SINGLE AND DUAL PRESSURE BUTT-WELDING PROCEDURES ON THE RELIABILITY OF PE 100 PIPE WELDS

    Arbeiter, F., Pinter, G. & Frank, A., 2013, Proceedings of Eurotec 2013.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Impact of varying between single and dual pressure butt-welding procedures for small scale pipes on short- and long-term fracture properties of PE 100 pipe welds

    Arbeiter, F., 2013.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    Improvement of light shielding performance of thermotropic glazings by adaption of material composition and curing parameters

    Weber, A. & Resch, K., 2013, Proceedings of the Austrian-Slovenian Polymer Meeting 2013. p. 132-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Interface thickness determination of mineral reinforced multilayer polypropylene pipes using Raman spectroscopy

    Arbeiter, F., Bruckmoser, K. & Pinter, G., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Interlaminar fatigue crack growth in carbon fiber reinforced composites

    Stelzer, S., 2013, Proceedings of the 19th International Conference on Composite Materials. p. 1689-1697

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests

    Redhead, A., Frank, A. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 101, p. 2-9

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Investigation of the thermal expansion behaviour of PV module encapsulation materials

    Knausz, M., Oreski, G. & Guttmann, P., 2013, The Proceedings of the Austrian – Slovenian Polymer Meeting 2013. p. 44-46

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Brunbauer, J. & Pinter, G., 2013, DVM-Bericht 140. p. 49-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Lebensdauerabschätzung von kohlenstofffaserverstärkten Laminaten auf Basis zyklenabhängiger Steifigkeiten

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Local damage simulations of printed circuit boards based on determined in plane cohesive zone parameters

    Fuchs, P. F., Pinter, G. & Fellner, K., 2013, In: Circuit World. 39, p. 60-66

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. Published

    Mechanische und thermische Charakterisierung von einem glasfaserverstärkten Polymer

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Mode II fatigue delamination resistance of advanced fiber-reinforced polymer–matrix laminates: Towards the development of a standardized test procedure

    Brunner, A., Stelzer, S., Pinter, G. & Terrasi, G. P., 2013, In: International Journal of Fatigue. 50, p. 57-62

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Monotone Zugversuche an ABS

    Hinterdorfer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Monotone Zugversuche an Blechen

    Hinterdorfer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Nanocomposite Hydrogels - Fracture Toughness and Energy Dissipation Mechanisms

    Klein, A., 2013, 115 p.

    Research output: Thesis › Master's Thesis

  36. Published

    New method of characterizing the fatigue behavior of thin films for acoustic applications at high frequencies

    Knapp, G., Oreski, G. & Pinter, G., 2013, 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013. p. 1600-1604 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Non-destructive on-line damage monitoring in composites under fatigue loading

    Maier, J. & Pinter, G., 2013.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Novel composite-composite joining technology with through the thickness reinforcement for enhanced damage tolerance

    Stelzer, S., 2013, Proceedings of the 19th International Conference on Composite Materials. p. 4645-4653

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    PCB drop test lifetime assessment based on simulations and cyclic bend tests

    Fuchs, P., Pinter, G. & Major, Z., 2013, In: Microelectronics Reliability. 53, p. 774-781

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Peel Tests zur Untersuchung des Haftungsverhaltens von Einbettungsmaterialien für Photovoltaik-Module

    Haingartner, C., 2013, 87 p.

    Research output: Thesis › Master's Thesis

  41. Published

    Prüfung von Schienenzwischenlagen

    Föttinger, J. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Spectroscopic Characterization of Thermal Degradation in Thermoplastic Polyurethanes

    Bruckmoser, K. & Resch, K., 2013, ICSAAM 2013 Proceedings. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Temperaturabhängige Druckuntersuchungen an Kupplungspaketen

    Feuchter, M. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    The effect of residual stress on polymer pipe lifetime

    Hutar, P., Sevcik, M., Andreas, F., Nahlik, L., Kucera, J. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 108, p. 98-108

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    THE IMPACT OF TIME, TEMPERATURE AND MEDIA ON POLYMER SELECTION FOR HIGH DEMAND APPLICATIONS

    Guttmann, P., Röper, F. & Pilz, G., 2013, The Proceedings of the Austrian – Slovenian Polymer Meeting 2013. p. 60-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Thermomechanische Eigenschaften von Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, Tagungsband Verbundwerkstoffe. p. 84-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Thermotropic Glazings: Theoretical and Practical Assessment of Overheating Protection Performance

    Weber, A., Gruber, D. & Resch, K., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Thermotropic overheating protection glazings

    Weber, A., Gruber, D. & Resch, K., 2013, Advances in Polymer Science and Technology 3: Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Zeit-Temperatur-Verschiebung von thermoplastischen polymeren Werkstoffen

    Moser, A., 2013

    Research output: Thesis › Master's Thesis

  50. Published

    Zyklische Prüfung von Rohrverbindungen

    Stelzer, S. & Pinter, G., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. 2012
  52. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Sept 2012.

    Research output: Contribution to conference › Presentation › Research

  53. Published

    Delamination Fatigue Testing of Continuous Fiber Composites

    Brunner, A. & Stelzer, S., 28 May 2012.

    Research output: Contribution to conference › Presentation › Research

  54. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 24 May 2012.

    Research output: Contribution to conference › Presentation › Research

  55. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 19 Apr 2012.

    Research output: Contribution to conference › Presentation › Research

  56. Published

    Towards a standardized test method for mode I fatigue crack growth in unidirectional fiber reinforced polymer composites

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 18 Apr 2012, Proc. 3rd Fatigue Symposium, Leoben, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Accelerated characterization of the resistance against crack initiation and slow crack growth of polyethylene for geomembrane application under the influence of media

    Redhead, A., Frank, A. & Pinter, G., 2012, 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012. p. 1250-1255 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Accelerated Investigation of Media Impact on Polyethylene Geomembranes

    Redhead, A., Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  59. Published

    Accelerated investigation of the effect of chlorine dioxide on the long-term failure behavior and the material aging of polyethylene for raised temperature resistance

    Redhead, A., Frank, A. & Pinter, G., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Accelerated investigation of the media resistance of polyethylene for geomembrane application

    Redhead, A., Frank, A. & Pinter, G., 2012, Proceedings of ANTEC 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Accelerated material ranking with cyclic CRB tests

    Frank, A., Redhead, A., Kratochvilla, T., Dragaun, H. & Pinter, G., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Analysis of molecular and morphological effects on slow crack growth in modern PE Pipe grades by cyclic fracture mechanics tests

    Redhead, A., Pinter, G. & Frank, A., 2012, In: Macromolecular Symposia. 311, p. 41-48

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Analysis of the process zone and the mechanism of slow crack growth initiation in high density polyethylene with accelerated cyclic tests

    Redhead, A., Pinter, G. & Frank, A., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    A pressure-dependent schapery model for polyoxymethylene

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, Proceedings of SEM Annual Conference. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Bestimmung ausgewählter mechanischer Eigenschaften sowie der monotonen und zyklischen interlaminaren Risszähigkeit von gewickelten und geflochtenen Kohlenstofffaserverbundwerkstoffen

    Schillfahrt, C., 2012

    Research output: Thesis › Master's Thesis

  66. Published

    Bestimmung der Glasübergangstemperaturen an co-extrudierten Platten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  67. Published

    Bestimmung der Kraft-Deformationsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Bestimmung der Kraft-Deformtionsverläufe an unterschiedlichen Möbelverbundfolien

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Bestimmung des Einflusses von chemischen Parametern auf grundlegende Materialeigenschaften von H-NBR Elastomeren

    Maier, A., 2012

    Research output: Thesis › Master's Thesis

  70. Published

    Bestimmung des linearen thermischen Ausdehnungskoeffizienten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  71. Published

    Characterization and Simulation of the Deformation and Failure Behavior of Printed Circuit Boards (PCB)

    Fuchs, P., 2012

    Research output: Thesis › Doctoral Thesis

  72. Published

    Characterization of the temperature dependent fracture behavior of HNBR based elastomers used in oil and gas industry

    Schrittesser, B., Pinter, G., Schwarz, G., Nagy, T. & Major, Z., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  73. Published

    Charakterisierung der oxidativen Wirkung von Chlordioxid auf Polyethylen für Hochtemperaturanwendungen

    Strecher, V., 2012

    Research output: Thesis › Master's Thesis

  74. Published

    Charakterisierung des Bauteilverhaltens von Hydraulikschläuchen unter hochfrequenter Belastung

    Aglassinger, S., 2012

    Research output: Thesis › Master's Thesis

  75. Published

    Comparison of accelerated tests for PE grades lifetime assessment

    Frank, A., Pinter, G., Kapur, M. & Nezbedová, E., 2012, Proceedings of Plastic Pipes XVI Conference 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Comparison of long-term-properties of polyolefin pipe grades using linear elastic fracture mechanics

    Arbeiter, F., Frank, A. & Pinter, G., 2012, proceedings of Plastic Pipes XVI Conference 2012. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Composite-Composite joining with enhanced damage toleranCe (CoJEC)

    Stelzer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  78. Published

    Consideration of viscoelastic properties of polymers for materials selection

    Guttmann, P., Pilz, G. & Röper, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  79. Published

    Cyclic interlaminar crack growth in unidirectional and braided composites

    Stelzer, S., 2012, Fatigue behaviour of fiber reinforced polymers. p. 49-63

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  80. Published

    Damage tolerance of fiber reinforced polymer composites

    Stelzer, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  81. Published

    Determination of the orthotropic material properties of individual layers of printed circuit boards

    Fuchs, P. F., Pinter, G. & Tonejc, M., 2012, In: Microelectronics Reliability. 52, 11, p. 2723-2730

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Different methodologies to characterize the slow crack growth resistance of polyethylene pipe grades

    Frank, A., Pinter, G., Adib, A., Dominguez, C., Carcia, R. A. & Rodriguez, J., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  83. Published

    Effect of heat ageing on the morphology of thermoplastic polyurethanes

    Bruckmoser, K. & Resch, K., 2012, 15th Intern. Conference P2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Effect of temperature-cycling on the morphology of polymeric thermotropic glazings for overheating protection applications

    Weber, A. & Resch, K., 2012, In: Journal of polymer research. 19, 6, p. 5-8

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Fracture mechanical testing of PE under the impact of liquid media

    Redhead, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  86. Published

    Fraktografische und mechanische Analyse von bandbeschichteten Blechen

    Kregl, L., 2012, 82 p.

    Research output: Thesis › Master's Thesis

  87. Published

    Functional polymeric materials for solar thermal applications

    Resch, K., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  89. Published

    Influence of fiber placement and architecture on fracture mechanical properties of carbon fiber reinforced composites

    Stelzer, S., Schillfahrt, C., Wolfahrt, M., Pinter, G., Noisternig, J. & Frieß, S., 2012, Proc. National Sampe Conference & Exhibition. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Investigation of Concepts Describing the Influence of Stress Concentration on the Fatigue Behaviour of Short Glass Fibre Reinforced Polyamide

    Eichlseder, W., Mösenbacher, A., Guster, C. & Pinter, G., 2012, Proceedings of the 15th European Conference on Composite Materials. Venice

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Investigation of the slow crack growth behavior of static and cyclic loaded specimens of polyethylene by 2D and 3D optical fracture surface analysis

    Andreas, F., Bruckmoser, K., Redhead, A., Gruber, D. P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 103-111

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Kompaktierungs- und Ermüdungsverhalten von RTM-Laminaten

    Ladstaetter, E. M., 2012, 151 p.

    Research output: Thesis › Doctoral Thesis

  93. Published

    Kunststofftechnik Leoben: Rohrexpertise in Spanien Präsentiert

    Arbeiter, F., Pinter, G., Redhead, A. & Frank, A., 2012, In: VLK-News. p. 18-18

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Lifetime prediction of multi-layer polyolefin pipes

    Arbeiter, F. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Lifetime prediction of polyethylene pipes

    Frank, A. & Pinter, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  96. Published

    Material- und Rissanalyse von Kunststoffkanülen aus LDPE

    Resch, K. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  97. Published

    Mechanische Eigenschaften von Epoxidharz-Faserverbundwerkstoffen in Abhängigkeit vom Aushärtungsgrad

    Karpf, R. J., 2012, 73 p.

    Research output: Thesis › Master's Thesis

  98. Published

    Mechanische Kennwertermittlung von unterschiedlichen Thermoplasten

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Mechanische und thermische Charakterisierung von sieben verschiedenen glasfaserverstärkten Polymeren

    Feuchter, M. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Development of a standardized test procedure

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N. & Pinter, G., 2012, In: Composites science and technology. 72, p. 1102-1107

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Modeling of the nonlinear viscoelasticity of polyoxymethylene in tension and compression

    Tscharnuter, D., Gastl, S. & Pinter, G., 2012, In: International journal of engineering science. 60, p. 37-52

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan Equation

    Frank, A., Hutar, P. & Pinter, G., 2012, In: Macromolecular Symposia. 311, p. 112-121

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...5 6 7 8 9 10 11 12 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101