Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

201 - 250 out of 1,629Page size: 50

Research output

  1. 2021
  2. Published

    Fracture of layered polymers

    Arbeiter, F., Petersmann, S., Wiener, J. & Spoerk, M., 31 Aug 2021.

    Research output: Contribution to conference › Abstract

  3. Published

    Bio-based polymers for transport packaging – possibilities & limitations

    Wild, N., Feuchter, M., Schindler, P., Poczi, A., Gebeshuber, I. C., Vasiljevic, M., Pamminger, H., MacQueen , M. & Brandstätter, A., 30 Aug 2021, Polymer Meeting 14 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Polymer Meeting 14: Book of Abstracts. Slugovec, C. & Trimmel, G. (eds.). TU Graz, p. 60 CL-A4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Curing of epoxidized plant oils with solid acid hardener

    Schwaiger, M. & Resch-Fauster, K., 30 Aug 2021, Polymer Meeting 14 : Book of Abstracts. TU Graz, p. 83 CL-A16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Investigating the influence of surface hardness and energy on the perceived stickiness of polymer coatings.

    Griesser, M., Ules, T., Schlogl, S. & Gruber, D. P., 6 Jul 2021, 2021 IEEE World Haptics Conference, WHC 2021. Institute of Electrical and Electronics Engineers, p. 1148 1 p. (2021 IEEE World Haptics Conference, WHC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Assessment of the chemical degradation of PFPE lubricants and greases for space applications: implications for long-term on-ground storage

    Wolfberger, A., Hausberger, A., Schlögl, S. & Hołyńska, M., Jul 2021, In: CEAS space journal. 13, 3, p. 377-388 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Characterization of crack saturation in glass fiber reinforced epoxy resins through optical methods

    Gfrerrer, M., Schneider, C., Wiener, J., Sperling, C. & Pinter, G. G., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Effects of artificial ageing tests on EVA degradation: Influence of microclimate and methodology approach

    Barretta, C., Oreski, G., Kyranaki, N., Mansour, D. E., Betts, T. R., Bauermann, L. P. & Resch-Fauster, K., 20 Jun 2021, 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021. Institute of Electrical and Electronics Engineers, p. 312-315 4 p. (Conference Record of the IEEE Photovoltaic Specialists Conference).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Crack Propagation Analysis of Compression Loaded Rolling Elements

    Dlhý, P., Poduska, J., Berer, M., Gosch, A., Slavik, O., Nahlik, L. & Hutař, P., 19 May 2021, In: Materials. 14.2021, 10, 24 p., 2656.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Klemmvorrichtung und Verfahren zur Prüfung einer Zugfestigkeit eines Objektes

    Julia, B. (Inventor), Bernd, S. (Inventor) & Franz, G. (Inventor), 15 May 2021, IPC No. G01N 3/ 04 A I, Patent No. AT523058, Priority date 10 Jan 2020, Priority No. AT20200050009

    Research output: Patent

  13. Published

    Modelling Failure Of Polymers: An Optimization Strategy Based on Genetic Algorithms and Instrumented Impact Tests

    Rueda, F., Rull, N., Quintana, C., Torres, J. P., Messiah, M., Frank, A., Arbeiter, F., Frontini, P. M. & Pinter, G., 30 Apr 2021, In: Journal of dynamic behavior of materials.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Theoretical and experimental investigations of mechanical vibrations of hot hammer forging

    Saberi, S., Fischer, J., Stockinger, M., Tikal, R. & Afsharnia, R., 20 Apr 2021, In: International Journal of Advanced Manufacturing Technology. 114.2021, 9-10, p. 3037-3045 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Electro-Thermo-Mechanical Reliability Assessment of Arbitrary Power Electronics

    Gschwandl, M., Pfost, M., Antretter, T., Fuchs, P. F., Mitev, I., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410862. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Prediction of Curing Induced Residual Stresses in Polymeric Encapsulation Materials for Microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., 19 Apr 2021, 2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021. Institute of Electrical and Electronics Engineers, 9410855. (2021 22nd International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Size-Induced Constraint Effects on Crack Initiation and Propagation Parameters in Ductile Polymers

    Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M. & Baldi, F., 13 Apr 2021, In: Materials. 14.2021, 8, 23 p., 1945.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Quantification Approaches for Fatigue Crack Resistance of Thermoplastic Tape Layered Composites with Multiple Delaminations

    Khudiakova, A., Brunner, A. J., Wolfahrt, M. & Pinter, G., 17 Mar 2021, In: Materials. 14.2021, 6, 23 p., 1476.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

    Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb 2021, In: Polymer Testing. 95.2021, March, 7 p., 107125.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites

    Wiener, J., Kaineder, H., Kolednik, O. & Arbeiter, F., 4 Feb 2021, In: Materials. 14.2021, 4, p. 1-19 19 p., 725.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Processability of Different Polymer Fractions Recovered from Mixed Wastes and Determination of Material Properties for Recycling

    Möllnitz, S., Feuchter, M., Duretek, I., Schmidt, G., Pomberger, R. & Sarc, R., 31 Jan 2021, In: Polymers. 13.2021, 3, p. 1-43 43 p., 457.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Thermal and Moisture Dependent Material Characterization and Modeling of Glass Fibre Reinforced Epoxy Laminates

    Yalagach, M., Fuchs, P., Antretter, T., Feuchter, M., Tao, Q. & Weber, M., 29 Jan 2021, In: Sensors & transducers. 248.2021, 1, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science. 5.2021, 2, 11 p., 40.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Quantifying matrix-fiber mechanical interactions in hyperelastic materials

    Mansouri, M. R., Beter, J., Fuchs, P. F., Schrittesser, B. & Pinter, G., 5 Jan 2021, In: International Journal of Mechanical Sciences. 195.2021, 1 April, 14 p., 106268.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene

    Pilz, G., Wurzer, S., Morak, M. & Pinter, G., 2021, In: Mechanics of time-dependent materials.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Duromere Matrixsysteme aus nachwachsenden Rohstoffen für den Einsatz in naturfaserverstärkten Verbundwerkstoffen

    Todorovic, A., 2021

    Research output: Thesis › Doctoral Thesis

  27. Published

    Experimental investigation of morphological and thermomechanical properties of frontally cured carbon fibre reinforced epoxy composites

    Grasser, V., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Fully bio-based high-performance thermoset

    Todorovic, A., Blößl, Y. (Co-editor) & Resch-Fauster, K. (Co-editor), 2021.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Functional hierarchical composites for structural applications

    Feuchter, M., Sieberer, M. & Kern, W., 2021, Polymer Meeting 14 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Investigating novel concepts to characterize the resistance against rapid crack propagation of polyamide 12 pipe grades

    Waly, C., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Investigation of mechanical anisotropy and interlayer bonding in thermoplastic composites produced by additive manufacturing

    Khudiakova, A., 2021

    Research output: Thesis › Doctoral Thesis

  32. Published

    Mechanical flexible and biodegradable thermoset with 100 % bio-based carbon content

    Schwaiger, M. & Resch-Fauster, K., 2021.

    Research output: Contribution to conference › Poster › Research

  33. Published

    Mechanical properties of layered polymers

    Arbeiter, F., 2021

    Research output: Thesis › Habilitation thesis › peer-review

  34. Published

    Morphological characterization of semi-crystalline POM using nanoindentation

    Christöfl, P., Czibula, C., Seidlhofer, T., Berer, M., Macher, A., Helfer, E., Schrank, T., Oreski, G., Teichert, C. & Pinter, G., 2021, In: International journal of polymer analysis and characterization. 26.2021, 8, p. 692-706 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Neuartige Leichtbaumaterialien mit 100% biobasiertem Kohlenstoffanteil

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., 2021, In: ACstyria newsletter .

    Research output: Contribution to journal › Article › Transfer

  36. Published

    Nur mit Öl und Säure: Von der Zitronensäure zu biobasierten Hochleistungs-Composites

    Todorovic, A., Resch-Fauster, K., Blößl, Y. & Schledjewski, R., 2021, In: CU reports : internationales Mitgliedermagazin des Composites United. [Deutsche Ausgabe] . 2021, 2, p. 28-29 2 p.

    Research output: Contribution to journal › Article › Research

  37. Published

    On the viability of the Laser Flash method for fast and total thermal characterisation of polymers: Extending the limits through inverse problem solving

    Rapp, D., 2021

    Research output: Thesis › Master's Thesis

  38. Published

    Polymer fracture mechanics extended to large plastic deformation and mixed mode loading

    Gosch, A., 2021

    Research output: Thesis › Doctoral Thesis

  39. Published

    Reinforcement of elastomers to obtain anisotropic material properties

    Beter, J., 2021

    Research output: Thesis › Doctoral Thesis

  40. Published

    Viskoelastische Eigenschaften von Polyamid unter Feuchtigkeitseinfluss

    Wurzer, S., 2021

    Research output: Thesis › Master's Thesis

  41. Published

    Zerstörungsfreie in-situ-Detektion von Schädigungsprozessen bei Ermüdungsbelastung zur Charakterisierung von Faserverbundwerkstoffen

    Sperling, C., 2021

    Research output: Thesis › Master's Thesis

  42. 2020
  43. Published

    Tailored Interfaces in Fiber-Reinforced Elastomers: A Surface Treatment Study on Optimized Load Coupling via the Modified Fiber Bundle Debond Technique

    Beter, J., Maroh, B., Schrittesser, B., Mühlbacher, I., Griesser, T., Schlögl, S., Fuchs, P. F. & Pinter, G., 24 Dec 2020, In: Polymers. 13.2020, 1, p. 1-17 17 p., 36.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Fatigue characterization of polyethylene under mixed mode I/III conditions

    Gosch, A., Arbeiter, F., Berer, M., Vojtek, T., Hutař, P. & Pinter, G. G., 15 Dec 2020, In: International Journal of Fatigue. 145.2021, April, 13 p., 106084.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Development of Porous Polyurethane Implants Manufactured via Hot-Melt Extrusion

    Koutsamanis, I., Spoerk, M., Arbeiter, F., Eder, S. & Roblegg, E., 10 Dec 2020, In: Polymers. 12.2020, 12, p. 1-22 22 p., 2950.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers

    Gosch, A., Geier, J., Arbeiter, F., Berer, M. & Pinter, G. G., 1 Dec 2020, (E-pub ahead of print) In: Procedia structural integrity / ESIS, European Structural Integrity Society. 28.2020, p. 1184-1192 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Damage tolerance-based methodology for fatigue lifetime estimation of a structural component produced by material extrusion-based additive manufacturing

    Arbeiter, F., Trávníček, L., Petersmann, S., Dlhý, P., Spoerk, M., Pinter, G. & Hutař, P., Dec 2020, In: Additive Manufacturing. 36, 101730.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fully bio-based high-performance polymers

    Todorovic, A., Blößl, Y. & Resch-Fauster, K., Dec 2020.

    Research output: Contribution to conference › Poster › Research

  49. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation

    Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C. & Pinter, G., 27 Nov 2020, In: Polymer Testing. 93.2021, January, 9 p., 106978.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    The Tension-Twist Coupling Mechanism in Flexible Composites: A Systematic Study Based on Tailored Laminate Structures Using a Novel Test Device

    Beter, J., Schrittesser, B., Meier, G., Lechner, B., Mansouri, M., Fuchs, P. F. & Pinter, G., 24 Nov 2020, In: Polymers. 12.2020, 12, p. 1-16 16 p., 2780.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Temperature impact on the mechanical and fatigue behavior of a non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., 23 Nov 2020, In: International Journal of Fatigue. 144.2021, March, 8 p., 106050.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101