Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1101 - 1200 out of 1,629Page size: 100

Research output

  1. 2009
  2. Published

    Computational and experimental simulation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, In: Engineering Fracture Mechanics. 76, p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Crack growth in polyethylene (PE-HD) - from macroscopic failure to molecular failure mechanisms

    Lang, R., Pinter, G., Frank, A. & Haager, M., 2009, EPF'09 European polymer congress. p. 121-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Determination of material parameters for hyperelastic material models for two elastomer grades

    Major, Z. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, Final Report

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Analyse von Lackkomponenten, Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Fischer, J., Buder-Stroisznigg, M. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Charakterisierung von Lackfilmen und bandbeschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lacken

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Development and characterization of novel two-layer high performance coil coatings for the buildings industry, WP Report Herstellung von Lackfilmen und beschichteten Blechen

    Wallner, G., Buder-Stroisznigg, M., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Development of a standardized procedure for the characterization of interlaminar crack growth in advanced composites under fatigue mode i loading conditions

    Brunner, A. J., Murphy, N. & Pinter, G., 2009, In: Engineering Fracture Mechanics. 76, p. 2678-2689

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Diverse Messungen an Polypropylen-Talk Compounds

    Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Druckprüfung nach ASTM D3410 an Composite Proben

    Pinter, G. & Payer, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Dynamisch-Mechanische Analyse (DMA) von Folienwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Dynamisch-Mechanische Analyse (DMA) von Thermoplastwerkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Dynamisch mechanische Analyse von Epoxidharzen

    Guttmann, P., 2009

    Research output: Thesis › Master's Thesis

  17. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, Final Report

    Wallner, G., Fischer, J. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Analyse und Charakterisierung von Rohstoffen und Halbzeugen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Effect of molecular and morphological parameters of PE-UHMW compounds on the performance of ski running surfaces, WP Report: Herstellung von Rohstoffen, Halbzeugen und Bauteilen

    Fischer, J., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Effect of polymer matrix on quasi-static and fatigue filled hole tension and compression tests in liquid moulding non-crimp fabric composites

    Pinter, G., Wolfahrt, M. & Kuntz, J., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Effect of preform architecture on the mechanical and fatigue behavior of braided compositess for generating design allowables

    Wolfahrt, M., Pinter, G., Zaremba, S., Reden, von, T. & Ebel, C., 2009, Sampe Europe 30 th Intern. Jubilee Conference and Forum. p. 271-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Evaluation of the aging behavior of ethylene copolymer films for solar applications under accelerated weathering conditions

    Oreski, G. & Wallner, G., 2009, In: Solar energy. 83, p. 1040-1047

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Fatigue Behaviour of Filled Polypropylene

    Grinschgl, M., 2009, 92 p.

    Research output: Thesis › Master's Thesis

  25. Published

    Fatigue propagation test development for polymer-matrix fibre-reinforced laminates

    Brunner, A., Paris, I. & Pinter, G., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Filler/matrix-debonding and micro-mechanisms of deformation in particulate filled pp composites under tension

    Jerabek, M., Major, Z. & Lang, R., 2009, Euro Fillers 2009. p. 18-22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Flexible clear coats - Effect of curing conditions

    Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2009, In: Progress in organic coatings. 65, p. 44-48

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Influence of filler surface modification on fracture mechanics of polypropylene / calcium carbonate compounds

    Feuchter, M., Pinter, G., Reisecker, V., Knerr, M. & Pham, T., 2009, Euro Fillers 2009. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Influence of the cure time on the apparent interlaminar shear strength of the toughened resin transfer moulding system PRIFORM© at a cure temperature of 180 °C

    Wolfahrt, M. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    In-line quality control of polymer nanocomposites using near-infrared spectroscopy

    Laske, S., Witschnig, A., Kracalik, M., Feuchter, M., Pinter, G., Maier, G., Langecker, G. R. & Holzer, C., 2009, NANOCON 2009 - 1st International Conference, Conference Proceedings. p. 120-125

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Kunststoffe unter der Sonne

    Meir, M., Brunold, S., Fischer, S., Kahlen, S., Köhl, M., Ochs, F., Peter, M., Resch, K., Wallner, G., Weiß, K.-A. & Wilhelms, C., 2009, In: Erneuerbare Energie. p. 14-16

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Langzeitversagen von thermoplastischen Rohrwerkstoffen

    Pinter, G. & Frank, A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Lifetime prediction of polyethylene pipes based on an accelerated extrapolation concept for creep crack growth with fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2169-2174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Lifetime Prediction of the Fatigue crack growth (FCG) of high density polyethylene (HDPE) by crack layer theory

    Choi, B.-H., Balika, W., Chudnovsky, A., Pinter, G. & Lang, R., 2009, In: Polymer engineering and science. 49, p. 1421-1428

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Materialidentifizierung von Motorhauben

    Oreski, G. & Wallner, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  36. Published

    Mechanische Charakterisierung von CFK-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Mechanische und thermo-mechanische Charakterisierung von PA-Werkstoffen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Methodenentwicklung zur Charakterisierung des Stick-Slip-Verhaltens von TPU-Materialien

    Hausberger, A., 2009

    Research output: Thesis › Master's Thesis

  39. Published

    Morphologie von Polymerwerkstoffen - Analyse von Polyethylenlaufflächen und duromeren Bandbeschichtungen

    Fischer, J., 2009

    Research output: Thesis › Doctoral Thesis

  40. Published

    Morphology of phase-separated thermotropic layers based on UV cured acrylate resins

    Resch, K. & Wallner, G., 2009, In: Polymers for Advanced Technologies. 20, 12, p. 1163-1167

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Numerical simulation of the failure behavior of PE pressure pipes with additional loads

    Hutar, P., Sevcik, M., Nahlik, L., Mitev, I., Frank, A. & Pinter, G., 2009, ANTEC 2009 Society of Plastics Engineers' Annual Technical Conference. p. 2163-2168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Numerical simulation of the failure behavior of PE pressure pipes with additional loads

    Hutar, P., Sevcik, M., Nahlik, L., Mitev, I., Frank, A. & Pinter, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Optimierung des Messaufbaus einer neuartigen Methode zur visuellen Charakterisierung des Erscheinungsbildes von Kunststoffoberflächen

    Baumann, A., 2009, 100 p.

    Research output: Thesis › Master's Thesis

  44. Published

    Phase separated thermotropic layers based on UV cured acrylate resins – Effect of material formulation on overheating protection properties and application in a solar collector

    Resch, K., Wallner, G. & Hausner, R., 2009, In: Solar energy. p. 1689-1697

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Polymere Faserverbundwerkstoffe für Luftfahrtanwendungen

    Pinter, G. & Wolfahrt, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  46. Published

    Polymeric Materials for Solar Thermal Applications - Endbericht

    Wallner, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

    Frank, A., Pinter, G. & Lang, R., 2009, In: Polymer Testing. 49, p. 737-745

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Ranking of PE pipe materials

    Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Special topics of polymer science and advanced characterization methods, Final Report

    Wallner, G., Fischer, J., Oreski, G., Resch, K. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche IR Spektroskopie

    Oreski, G., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Special topics of polymer science and advanced characterization methods, WP Report Fortschrittliche Rasterkraftmikroskopie

    Resch, K., Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Special topics of polymer science and advanced characterization methods, WP Report Ramanspektroskopie und Ramanmikroskopie

    Wallner, G., Lang, R. & Fischer, J., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    Standardisierte Zugprüfungen an Polypropylen/Algen-compounds

    Feuchter, M. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  54. Published

    Structure-property correlations of flexible clear coats

    Buder-Stroisznigg, M., Wallner, G., Strauß, B. & Jandel, L., 2009, In: Progress in organic coatings. 65, p. 328-332

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Thermische Charakterisierung von POM-Bauteilen

    Pilz, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  56. Published

    Thermische Untersuchungen an glasfaserverstärkten PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. Published

    Thermische Untersuchungen an PA-Werkstoffen

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  58. Published

    Thermoanalytical investigation of a sieve residue - project: Jiwi Kamai

    Wallner, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Thermoanalytical investigation of a sieve residue - project: Portucal Viana PM1

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Thermoanalytical investigation of a thermoset sample - project: Florence USA 09

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  61. Published

    Thermoanalytical investigation of a thermoset sample - project: Portucal Viana PM1

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  62. Published

    Thermoanalytical investigation of a thermoset sample - project: Stora PH PM2 09

    Wallner, G. & Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  63. Published

    Thermo mechanical characterization of PE and PP materials

    Pilz, G., Pinter, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. Published

    Thermomechanische und bruchmechanische Eigenschaften nanopartikelverstärkter Epoxidharze

    Stadelmann, S., 2009

    Research output: Thesis › Master's Thesis

  65. Published

    Thermotropic layers for flat-plate collectors - A review of various concepts for overheating protection with polymeric materials

    Resch, K. & Wallner, G., 2009, In: Solar energy materials and solar cells. 93, p. 119-128

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Utilizing unbleached cellulosic fibres in polypropylene matrix composites for injection moulding applications

    Burgstaller, C., Rüf, W., Stadlbauer, W., Pilz, G. & Lang, R., 2009, In: Journal of biobased materials and bioenergy. p. 226-231

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Wärmeausdehnung GFK

    Pinter, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  68. Published

    Zug- und Biegeprüfung eines Polymerbeton-Verbundwerkstoffes

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  69. Published

    Zyklische Risswachstumsversuche an CRB-Proben als Qualitätssicherungstest zur Abschätzung des Langzeitverhaltens von PE-Rohrwerkstoffen

    Redhead, A., 2009, 74 p.

    Research output: Thesis › Master's Thesis

  70. 2008
  71. Published

    2. Leobener Symposium "SOLARTECHNIK - Neue Möglichkeiten für die Kunststoffbranche

    Lang, R. (Editor) & Wallner, G. (Editor), 2008, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  72. Published

    Accelerated investigation of creep crack growth in polyethylene pipe grade materials by the use of fatigue tests on cracked round bar specimens

    Frank, A., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2435-2439

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Aging behavior of polymeric solar thermal absorber materials

    Kahlen, S. & Wallner, G., 2008, Aging behavior of polymeric solar thermal absorber materials. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. XII-1-XII-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Aging mechanisms of polymeric films for PV encapsulation

    Oreski, G. & Wallner, G., 2008, Aging mechanisms of polymeric films for PV encapsulation. Montanuniversität Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. XXII-1-XXII-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Analog triggered image acqusition method for optical measurement under cyclic load conditions

    Vezer, S. T. & Major, Z., 2008, In: Materials engineering. 15, 1, p. 5-13

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Analyse spezieller Zugversuchsergebnisse aus der Projektphase I

    Pilz, G. & Rausch-Schott, O., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Analysis of coloring of PP containers

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  78. Published

    A novel methodology for the evaluation of distinctness of image of glossy surfaces

    Gruber, D., Buder-Stroisznigg, M., Wallner, G., Strauß, B., Jandel, L. & Lang, R., 2008, In: Progress in organic coatings. 63, p. 377-381

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    A novel qualification procedure for lifetime and safety assessment of PE pressure pipes for arbitrary installation conditions

    Frank, A., Pinter, G. & Lang, R., 2008, Plastics Pipes XIV (CD). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    A test procedure for extruded polymeric solar thermal absorbers

    Olivares, A., Rekstad, J., Meir, M., Kahlen, S. & Wallner, G., 2008, In: Solar energy materials and solar cells. 92, p. 445-452

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Characterisation of the failure behavior of elastomer composites

    Major, Z., Kajtna, A., Kovacevic, Z., Mesec, A. & Kosir, M., 2008, ASPM 2008. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Characterisation of the fracture behavior of NBR and FKM grade elastomers for oilfield applications

    Major, Z. & Lang, R., 2008, Multilevel Approach to Fracture of Materials, Components and Structures. p. 228-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Characterization and Simulation of the Deformation Behaviour of Elastomer Particle filled Polypropylene Compounds

    Wang, E., 2008, 98 p.

    Research output: Thesis › Master's Thesis

  84. Published

    Characterization of silicon based thermoplastic elastomer for PV encapsulation

    Oreski, G., Wallner, G. & Randel, P., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  85. Published

    Characterization of silicon based thermoplastic elastomer for PV encapsulation

    Oreski, G., Wallner, G. & Randel, P., 2008, EU PV SEC 08. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Characterization of the effects of preforming and redeforming on morphology and thermo-mechanical properties of polyethylene close-fit liners for trenchless pipe rehabilitation

    Frank, A., Mannsberger, G., Pinter, G. & Lang, R., 2008, ANTEC 2008 Society of Plastics Engineers' Annual Technical Conference. p. 2251-2255

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Characterization of the Fracture and Fatigue Behavior of Elastomer Composites

    Major, Z. & Lang, R., 2008, EUROMECH Colloquium 502. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Characterization of the impact tensile behavior of glass fibre reinforced polyamide (PA-GF) Materials

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  89. Published

    Characterization of the magnetorheologica behavior of elastomers

    Schrittesser, B., Major, Z. & Filipcsei, G., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Characterization of the magnetorheological behavior of fluids and elastomeers

    Major, Z., Filipcsei, G. & Zrinyi, M., 2008, ASPM 2008. p. 41-41

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Characterization of the property profile of old PE gas pipes in service for up to 30 years

    Frank, A., Podingbauer, T., Liedauer, S., McCarthy, M., Haager, M. & Pinter, G., 2008, Plastics Pipes XIV (CD). p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Characterization of the tensile behavior of glass fiber reinforced polyamide materials (PA-LGF) at high loading rates

    Major, Z. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  93. Published

    Charakterisierung des Risswachstumsverhaltens von Cracked Round Bar (CRB) Prüfkörpern auf Basis der Materialnachgiebigkeit

    Freimann, W., 2008

    Research output: Thesis › Master's Thesis

  94. Published

    Cross-linking behavior of UV-curable acrylate resins

    Wallner, G., Resch, K. & Lang, R., 2008, In: Zeitschrift Kunststofftechnik : Journal of plastics technology. p. 2-14

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Crosslinking reactions and network structure in UV-curable acrylate resins

    Resch, K. & Wallner, G., 2008, ASPM 2008 - 9th Austrian Polymer Meeting. p. 17-17

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Deformation Analysis Of Impact Loaded Composites

    Fuchs, P., Major, Z. & Lang, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  97. Published

    Determination of bearing strength of composites by bold bearing configuration

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  98. Published

    Determination of hierarchical strains in intercalated clay-polypropylene nanocomposites

    Feuchter, M., Maier, G. A., Pinter, G., Kracalik, M., Laske, S. & Langecker, G. R., 2008, Materials Research Society Symposium Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Determination of interlaminar fracture toughness energy values according to pr DIN EN 6033

    Pinter, G. & Lang, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  100. Published

    Development an implementation of a novel tribological test method and characterisation of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  101. Published

    Development an implementation of a novel tribological test method and characterization of TPU materials

    Hausberger, A., Bruckmoser, K. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  102. Published

    Development of an in plane biaxial test setup for monotonic and cyclic tests

    Vezer, S. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...8 9 10 11 12 13 14 15 ...17 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101