Chair of Materials Physics (430)

Organisational unit: Chair

1751 - 1800 out of 1,985Page size: 50

Research output

  1. 2006
  2. Published

    Nano structures by severe plastic deformation - Jahresbericht 2006

    Scheriau, S. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Nano structures by severe plastic deformation - Quartalsbericht 1

    Scheriau, S. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Nano structures by severe plastic deformation - Quartalsbericht 2

    Scheriau, S. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Nano structures by severe plastic deformation - Quartalsbericht 3

    Scheriau, S. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Nano structures by severe plastic deformation - Quartalsbericht 4

    Scheriau, S. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Neuauswertung der Serie S790

    Görgl, R. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    On the Algorithmic Implementation of a Material Model Accounting for the Effects of Martensitic Transformation

    Antretter, T., Fischer, F. D., Cailletaud, G. & Ortner, B., 2006, In: Steel research international. 77, p. 733-740

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    On the elastic stiffness of collagen type I molecules

    Jäger, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Optimized Performance of CrN Coatings via a Cr Interlayer With Specific Thickness: Structure-Property Relations

    Daniel, R., Fontalvo, G., Keckes, J. & Mitterer, C., 2006, Thin Film 2006. p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Orientation of cellulose crystallites in regenerated cellulose fibres under tensile and bending loads

    Gindl, W., Martinschitz, K.-J., Boesecke, P. & Keckes, J., 2006, In: Cellulose. p. 621-627

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Pamidronate does not adversely affect bone intrinsic material properties in children with osteogenesis imperfecta

    Weber, M., Roschger, P., Fratzl-Zelman, N., Schöberl, T., Rauch, F., Glorieux, F. H., Fratzl, P. & Klaushofer, K., 2006, In: Bone. 39, p. 616-622

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Rapid determination of stress factors and absolute residual stresses in thin films

    Martinschitz, K. J., Eiper, E., Massl, S., Köstenbauer, H., Daniel, R., Fontalvo, G., Mitterer, C. & Keckes, J., 2006, In: Journal of applied crystallography. 39, p. 777-783

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Rapid determination of stress factors and residual stresses in anisotropic thin films

    Martinschitz, K.-J., Eiper, E. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Residual stresses and strains in thin films characterized by the combination of sin2ψ and substrate curvature methods

    Martinschitz, K.-J., Eiper, E. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    SAXS experiments on coated polybenzimidazol foils using the NanoSTAR

    Görgl, R. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    SAXS experiments on colloidal suspensions using the NanoSTAR

    Görgl, R. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    SAXS experiments on polymeric solutions

    Görgl, R. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Schadensentwicklung in Torionsproben einer Nickelbasislegierung und der Einfluss der Schädigung auf das Versagen im Zugversuch

    Trattnig, G., Kleber, S. & Pippan, R., 2006, Tagungsband XXV.. p. 185-192

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Severe Plastic Deformation of Tungsten Alloys and its Influence on Fracture Behaviour

    Faleschini, M., 2006

    Research output: Thesis › Doctoral Thesis

  21. Published

    Size effect in metallic thin films characterized by low-temperature X-ray diffraction

    Eiper, E., Martinschitz, K. J., Dehm, G. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Size effect in metallic thin films characterized by low-temperature X-ray diffraction

    Eiper, E., Martinschitz, K. J., Dehm, G. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Small is strong-not only by strain gradients

    Schöberl, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Strain hardening in regenerated cellulose fibres

    Gindl, W. & Keckes, J., 2006, In: Composites science and technology. 66, p. 2049-2053

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Stress Factors and Absolute Residual Stresses in Thin Films Determined by the Combination of Curvature and sin2ψ Methods

    Martinschitz, K.-J., Eiper, E. & Keckes, J., 2006, In: Materials Science Forum . 524-525, p. 711-715

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Structural changes during tensile testing of an all-cellulose composite by in situ synchrotron X-ray diffraction

    Gindl, W., Martinschitz, K.-J., Boesecke, P. & Keckes, J., 2006, In: Composites science and technology. p. 2639-2647

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Structural changes in cyclically deformed cellulosics characterized by in situ synchrotron X-ray diffraction coupled with tensile tests

    Keckes, J., Boesecke, P. & Gindl, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Structure and mechanical/tribological properties of TiN-Ag nanocomposite coatings

    Köstenbauer, H., Fontalvo, G., Mitterer, C. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Structure and properties of a pulp fibre-reinforced composite with regenerated cellulose matrix

    Gindl, W., Schöberl, T. & Keckes, J., 2006, In: Applied physics / A (Series A, Materials science & processing). 83, p. 19-22

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Symmetry properties and transformation behaviour of the X-ray stress factors

    Ortner, B., 2006, In: Journal of applied crystallography. 39, p. 401-409

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    TEM Investigations of the Structural Evolution in a Pearlitic Steel Deformed by High-Pressure Torsion

    Wetscher, F., Pippan, R., Sturm, S., Kauffmann, F., Scheu, C. & Dehm, G., 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37, p. 1963-1968

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Temperature dependence of residual stresses in thin films determined by the substrate

    Eiper, E., Martinschitz, K.-J., Köstenbauer, H., Massl, S. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Temperature dependence of residual stresses in thin films determined by the substrate curvatur method

    Eiper, E., Martinschitz, K.-J., Köstenbauer, H., Massl, S. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Texture changes in cyclically deformed cellulosics characterized by in-situ synchrotron diffraction coupled with tensile tests

    Martinschitz, K.-J., Boesecke, P., Gindl, W. & Keckes, J., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    The characterization of local deformation and fracture properties - a tool for advanced materials design

    Kolednik, O., 2006, In: Advanced engineering materials. 8, p. 1079-1083

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    The Characterization of the Intermetallic Fe-Al Layer of Steel-Aluminium Weldings.

    Potesser, M., Schöberl, T., Antrekowitsch, H. & Bruckner, J., 2006,

    Proc.of 135th TMS Annual Meeting & Exhibition

    .     p. 167-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    The limits of refinement by severe plastic deformation

    Pippan, R., Wetscher, F., Hafok, M., Vorhauer, A. & Sabirov, I., 2006, In: Advanced engineering materials. 8, p. 1046-1056

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    The prediction of the crack propagation direction according to the criterion of maximum energy dissipation

    Kolednik, O., Predan, J., Simha, N. K. & Fischer, F. D., 2006, Proceedings of the International Conference on CRACK PATHS (CP 2006). p. ?-?

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Wear resistance tests on a locus mandible-abrasion of a biomaterial

    Schöberl, T., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 1

    Jesner, G. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 2

    Jesner, G. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 3

    Jesner, G. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Werkstoffbasierte Standzeitoptimierung von Werkzeugen der Kaltmassivumformung - Bericht 4

    Jesner, G. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Wet or dry - Hardness, stiffness and wear resistance of biological materials on the micron scale

    Schöberl, T. & Jäger, I., 2006, In: Advanced engineering materials. p. 1164-1169

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Zementproben Degussa: In-situ Messungen während der Aushärtung

    Maier, G. & Dehm, G., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Zukunftsfonds Land Steiermark, Projekt Nr. 119

    Eiper, E., Keckes, J. & Pippan, R., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. 2005
  48. Published

    A comparison of two experimental methods for assessing the influence of initial defects on fatigue life

    Gänser, H.-P., Godor, I., Eichlseder, W., Pippan, R., Ofner, R. & Vollgger, R., 2005, A comparison of two experimental methods for assessing the influence of initial defects on fatigue life. Eigenverlag, p. 500-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    A fracture mechanics investigation on crack growth in massive forming

    Trattnig, G., Sommitsch, C. & Pippan, R., 2005, In: Materials Science Forum . p. 339-342

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    All-cellulose nanocomposite

    Gindl, W. & Keckes, J., 2005, In: Polymer. 46, p. 10221-10225

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    A model for the stability and creep of organic materials

    Jäger, I., 2005, In: Journal of biomechanics. 38, p. 1459-1467

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    An analytic and generalized formulation of the sin² psi method

    Ortner, B., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1049-1055

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...32 33 34 35 36 37 38 39 40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112