Chair of Materials Physics (430)

Organisational unit: Chair

551 - 600 out of 1,986Page size: 50

Research output

  1. 2019
  2. Published

    Chemnical Bonding Effects on the Brittle-to-Ductile Transition in Metallic Glasses

    Moitzi, F., Sopu, D. (Co-editor) & Eckert, J. (Co-editor), 2019.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Deformation and Crystallization Kinetics of a Softmagnetic Iron Based Bulk Metallic Glass

    Eckert, J., Antoni, M., Chawake, N., Sarac, B., Bachmaier, A., Polak, C., Spieckermann, F., Pippan, R., Zehetbauer, M. J. & Grössinger, R., 2019.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Deformation Mechanisms in Metallic Glasses: An Atomistic Study

    Moitzi, F., 2019

    Research output: Thesis › Master's Thesis

  5. Published

    Design and fabrication of various MEMS-based structures for investigating thermo-mechanical and fatigue behavior of thin metal films and metal barriers

    Saghaeian, F., 2019

    Research output: Thesis › Doctoral Thesis

  6. Published

    Effects of alloying and fluxing treatment on thermal, magnetic and structural properties of Fe-(Ni,Co)-P-C metallic glass ribbons

    Yüce, E., 2019

    Research output: Thesis › Master's Thesis

  7. Published

    Evolution of structure and residual stress of a fcc/hex-AlCrN multi-layered system upon thermal loading revealed by cross-sectional X-ray nano-diffraction

    Jäger, N., Klima, S., Hruby, H., Julin, J., Burghammer, M., Keckes, J., Mitterer, C. & Daniel, R., 2019, In: Acta materialia. 162.2019, 1, p. 55-66 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending

    Jakob, S., Leitner, A., Hohenwarter, A., Lorich, A., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  9. Published

    High pressure torsion deformation of nanocarbon-reinforced metal matrix composites

    Katzensteiner, A., 2019

    Research output: Thesis › Doctoral Thesis

  10. Published

    Implementation of femtosecond laser processing for materials testing and research

    Pfeifenberger, M., 2019

    Research output: Thesis › Doctoral Thesis

  11. Published

    Mechanical, Physical and Structural Investigation of Severe Plastically Deformed CuZr-Based Metallic Glasses

    Rezvan, A., 2019

    Research output: Thesis › Master's Thesis

  12. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Nanoindentation response of single crystal copper films on sapphire

    Sträußnigg, J. M., 2019

    Research output: Thesis › Master's Thesis

  14. Published

    Thermally activated deformation mechanisms – High temperature nanoindentation on W-Re alloys

    Kappacher, J., Wurmshuber, M., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  15. Published

    The role of adhesion layers on the interfacial reliability of multilayer insulators

    Paulitsch, M., 2019

    Research output: Thesis › Master's Thesis

  16. Published

    Ultrafine-grained Tungsten by High-Pressure Torsion – Bulk precursor versus powder processing route

    Wurmshuber, M., Doppermann, S., Wurster, S. & Kiener, D., 2019, IOP Conference Series: Materials Science and Engineering. Vol. 580. 012051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2018
  18. Published

    Crack arrest in thin metallic film stacks due to material- and residual stress inhomogeneities

    Kozic, D., Gänser, H.-P., Brunner, R., Kiener, D., Antretter, T. & Kolednik, O., 31 Dec 2018, In: Thin solid films. p. 14-22 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling

    Li, F., Hao, P., Yi, J., Prashanth, K. G., Maity, T. & Eckert, J., 23 Dec 2018, (E-pub ahead of print) In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 12, p. 6469-6478 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Evolution of microstructure and mechanical properties of a grades TiAlON thin film investigated by cross-sectional characterization techniques

    Schalk, N., Tkadletz, M., Terziyska, V., Deluca, M., Letofsky-Papst, I., Keckes, J. & Mitterer, C., 14 Dec 2018, (E-pub ahead of print) In: Surface & coatings technology. 315.2019, February, p. 155-161 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Ductile bulk metallic glass by controlling structural heterogeneities

    Scudino, S., Bian, J. J., Shakur Shahabi, H., Şopu, D., Sort, J., Eckert, J. & Liu, G., 1 Dec 2018, In: Scientific reports. 8.2018, 1, 12 p., 9174.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Origin of large plasticity and multiscale effects in iron-based metallic glasses

    Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 1 Dec 2018, In: Nature Communications. 9.2018, 1, 10 p., 1333.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Co-Cr-Mo-C-B metallic glasses with wide supercooled liquid region obtained by systematic adjustment of the metalloid ratio

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N. M., Prashanth, K. G., Park, J. M., Song, K. K., Wang, W. M., Eckert, J. & Kim, K. B., 24 Nov 2018, In: Journal of non-crystalline solids. 505.2019, 1 February, p. 310-319 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Removing the oxide layer in a nanostructured aluminum alloy by local shear deformation between nanoscale phases

    Wang, Z., Prashanth, K. G., Zhang, W. W., Scudino, S. & Eckert, J., 24 Nov 2018, In: Powder Technology. 343.2019, 1 February, p. 733-737 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks

    Hohenwarter, A. & Pippan, R., 21 Nov 2018, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 2, p. 601-608 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Mechanical properties of the magnetocaloric intermetallic LaFe11.2Si1.8 alloy at different length scales

    Glushko, O., Funk, A., Maier-Kiener, V., Kraker, P., Krautz, M., Eckert, J. & Waske, A., 20 Nov 2018, In: Acta materialia. 165.2019, February, p. 40-50 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Synthesis, characterization and thermodynamic stability of nanostructured epsilon-iron carbonitride powder prepared by a solid-state mechanochemical route

    Rounaghi, S. A., Vanpoucke, D. E. P., Esmaeili, E., Scudino, S. & Eckert, J., 3 Nov 2018, In: Journal of alloys and compounds. 778.2019, 25 March, p. 327-336 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    Impact of interfaces on the radiation response and underlying defect recovery mechanisms in nanostructured Cu-Fe-Ag

    Wurmshuber, M., Frazer, D., Bachmaier, A., Wang, Y., Hosemann, P. & Kiener, D., 1 Nov 2018, (E-pub ahead of print) In: Materials and Design. 160.2018, 15 December, p. 1148-1157 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Pressure-assisted sintering of Al-Gd-Ni-Co amorphous alloy powders

    Wang, Z., Prashanth, K. G. P., Surreddi, K. B., Suryanarayana, C., Eckert, J. & Scudino, S., 1 Oct 2018, In: Acta materialia. 2.2018, October, p. 157-166 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Mechanical properties of coal macerals: A nanoindentation study

    Vranjes-Wessely, S., Misch, D., Schöberl, T., Kiener, D., Groß, D. & Sachsenhofer, R., 25 Sept 2018.

    Research output: Contribution to conference › Abstract › peer-review

  31. Published

    Author Correction: Origin of large plasticity and multiscale effects in iron-based metallic glasses: Erratum: Origin of large plasticity and multiscale effects in iron-based metallic glasses (Nature Communications, (2018), 9, 1, (1333), 10.1038/s41467-018-03744-5)

    Sarac, B., Ivanov, Y. P., Chuvilin, A., Schöberl, T., Stoica, M., Zhang, Z. & Eckert, J., 11 Sept 2018, In: Nature Communications. 9.2018, 1, 1 p., 3761.

    Research output: Contribution to journal › Comment/debate › peer-review

  32. Published

    Fracture mechanics of micro samples: Fundamental considerations

    Pippan, R., Wurster, S. & Kiener, D., 5 Sept 2018, In: Materials and Design. 159.2018, 5 December, p. 252-267

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Influence of secondary phase on intrinsic threshold and path of shear-mode fatigue cracks in metals

    Vojtek, T., Hohenwarter, A., Pippan, R. & Pokluda, J., 1 Sept 2018, In: Acta Physica Polonica A. 134.2018, 3, p. 699-702 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Effect of Deformation on a Composite of Cu and the Soft Magnetic Metallic Glass Fe73.9Cu1Nb3Si15.5B6.6

    Antoni, M., Pippan, R., Sarac, B., Ketov, S. V., Bachmaier, A., Polak, C., Spieckermann, F., Grössinger, R. & Eckert, J., Sept 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. E-pub ahead of print

    Structural and mechanical characterization of heterogeneities in a CuZr-based bulk metallic glass processed by high pressure torsion

    Ebner, C., Escher, B., Gammer, C., Eckert, J., Pauly, S. & Rentenberger, C., 30 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 160.2018, November, p. 147-157 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Metallic glass nanolaminates with shape memory alloys

    Şopu, D., Albe, K. & Eckert, J., 22 Aug 2018, (E-pub ahead of print) In: Acta Materialia. 159.2018, 15. October, p. 344-351 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    In-situ observations of the fracture and adhesion of Cu/Nb multilayers on polyimide substrates

    Cordill, M., Kleinbichler, A., Völker, B., Kraker, P., Economy, D. R., Többens, D. M., Kirchlechner, C. & Kennedy, M. S., 14 Aug 2018, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 456-462 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Cooperative deformation behavior between the shear band and boundary sliding of an Al-based nanostructure-dendrite composite

    Kim, J. T., Hong, S. H., Kim, Y. S., Park, H. J., Maity, T., Chawake, N., Bian, X. L., Sarac, B., Park, J. M., Prashanth, K. G., Park, J. Y., Eckert, J. & Kim, K. B., 11 Aug 2018, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 735.2018, 26 September, p. 81-88 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Linking Macroscopic Fracture Properties to Single Dislocation Processes

    Issa, I., Alfreider, M., Kozic, D., Kolednik, O., Sandfeld, S. & Kiener, D., Aug 2018, In: Microscopy and microanalysis. 24.2018, Supplement S1, p. 2184-2185 2 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Nanoindentation study of macerals in coals from the Ukrainian Donets Basin

    Vranjes-Wessely, S., Misch, D., Schöberl, T., Kiener, D., Groß, D. & Sachsenhofer, R., Aug 2018, In: Advances in Geosciences. 2018, 45

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Constituent constraining effects on the microstructural evolution, ductility, and fracture mode of crystalline/amorphous nanolaminates

    Wang, Y., Kiener, D., Liang, X., Bian, J., Wu, K., Zhang, J., Liu, G. & Sun, J., 19 Jul 2018, In: Journal of alloys and compounds. 768.2018, 5 November, p. 88-96 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    In-situ TEM observation of {101¯2} twin-dominated deformation of Mg pillars: Twinning mechanism, size effects and rate dependency

    Jeong, J., Alfreider, M., Konetschnik, R., Kiener, D. & Oh, S. H., 18 Jul 2018, (E-pub ahead of print) In: Acta Materialia. 158.2018, 1 October, p. 407-421 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Metal release and cell biological compatibility of beta-type Ti-40Nb containing indium

    Pilz, S., Gebert, A., Voss, A., Oswald, S., Göttlicher, M., Hempel, U., Eckert, J., Rohnke, M., Janek, J. & Calin, M., 1 Jul 2018, In: Journal of Biomedical Materials Research - Part B Applied Biomaterials. 106.2018, 5, p. 1686-1697 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Molecularly grafted, structurally integrated multifunctional polymer thin films with improved adhesion

    Lassnig, A., Nakamura, N., Jörg, T., Reeja-Jayan, B. & Cordill, M., 28 Jun 2018, (E-pub ahead of print) In: Surface & coatings technology. 349.2018, 15 September, p. 963-968 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Correlation between the atomic configurations and the amorphous-to-icosahedral phase transition in metallic glasses

    Geng, G., Yan, Z., Hu, Y., Wang, Z., Ketov, S. V. & Eckert, J., 22 Jun 2018, In: Journal of Materials Research. 33.2018, 18, p. 2775-2783 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Enhancing the interface bonding in carbon nanotubes reinforced Al matrix composites by the in situ formation of TiAl3 and TiC

    Liu, X. Q., Li, C. J., Yi, J. H., Prashanth, K. G., Chawake, N., Tao, J. M., You, X., Liu, Y. C. & Eckert, J., 19 Jun 2018, In: Journal of alloys and compounds. 765.2018, 15 October, p. 98-105 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Crack Initiation of Printed Lines Predicted with Digital Image Correlation

    Katsarelis, C., Glushko, O., Tonkin, C., Kennedy, M. S. & Cordill, M., 13 Jun 2018, In: JOM. 70.2018, 9, p. 1805-1810 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Thermal behavior, structural relaxation and magnetic study of a new Hf-microalloyed Co-based glassy alloy with high thermal stability

    Taghvaei, A. H., Shirazifard, N. G., Ramasamy, P., Bednarčik, J. & Eckert, J., 5 Jun 2018, In: Journal of alloys and compounds. 748.2018, June, p. 553-560 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Fast Calorimetry of Mg65-Cu25-Gd10

    Spieckermann, F., Rosenthal, M., Steffny, I., Bian, X. L., Ketov, S. V., Löffler, J. F., Stoica, M. & Eckert, J., Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Universally scaling Hall-Petch-like relationship in metallic glass matrix composites

    Liu, Y. Y., Liu, P. Z., Li, J. J., Liaw, P. K., Spieckermann, F., Kiener, D., Qiao, J. W. & Eckert, J., Jun 2018, In: International journal of plasticity. 105.2018, June, p. 225-238 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    Influence of severe straining and strain rate on the evolution of dislocation structures during micro-/nanoindentation in high entropy lamellar eutectics

    Maity, T., Prashanth, K. G., Balci, Ö., Kim, J. T., Schöberl, T., Wang, Z. & Eckert, J., 31 May 2018, (E-pub ahead of print) In: International journal of plasticity. 109.2018, October, p. 121-136 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. E-pub ahead of print

    Scratch induced thin film buckling for quantitative adhesion measurements

    Kleinbichler, A., Pfeifenberger, M. J., Zechner, J., Wöhlert, S. & Cordill, M., 29 May 2018, (E-pub ahead of print) In: Materials and Design. 115.2018, 5 October, p. 203-211 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...8 9 10 11 12 13 14 15 ...40 Next
View graph of relations

Contact information

Jahnstrasse 12/I, 8700 Leoben
  • Main phone number: +43 3842 804 112