Chair of Functional Materials and Materials Systems (425)

Organisational unit: Chair

Research output

  1. 2021
  2. Published

    Synthesis of bulk reactive Ni-Al composites using high pressure torsion

    Renk, O., Tkadletz, M., Kostoglou, N., Gunduz, I. E., Fezzaa, K., Sun, T., Stark, A., Doumanidis, C. C., Eckert, J., Pippan, R., Mitterer, C. & Rebholz, C., 15 Mar 2021, In: Journal of alloys and compounds. 857.2021, 15 March, 11 p., 157503.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Deviating from the pure MAX phase concept: Radiation-tolerant nanostructured dual-phase Cr2AlC

    Tunes, M. A., Imtyazuddin, M., Kainz, C., Pogatscher, S. & Vishnyakov, V. M., Mar 2021, In: Science Advances. 7, 13, p. 1-12 eabf6771.

    Research output: Contribution to journalArticleResearchpeer-review

  4. Published

    In-Situ Investigation of the Oxidation Behaviour of Chemical Vapour Deposited Zr(C,N) Hard Coatings Using Synchrotron X-ray Diffraction

    Frank, F., Tkadletz, M., Saringer, C., Stark, A., Schell, N., Deluca, M., Czettl, C. & Schalk, N., 24 Feb 2021, In: Coatings. 11.2021, 3, p. 264 16 p., 11030264.

    Research output: Contribution to journalArticleResearchpeer-review

  5. Published

    Adhesion evaluation of thin films to dielectrics in multilayer stacks: A comparison of four-point bending and stressed overlayer technique.

    Lassnig, A., Putz, B., Hirn, S., Többens, D., Mitterer, C. & Cordill, M. J., 15 Feb 2021, In: Materials and Design. 200, 15 February, 8 p., 109451.

    Research output: Contribution to journalArticleResearchpeer-review

  6. Published

    Mechanical properties of single and polycrystalline α-Al2O3 coatings grown by chemical vapor deposition

    Konstantiniuk, F., Tkadletz, M., Kainz, C., Czettl, C. & Schalk, N., 11 Feb 2021, In: Surface & coatings technology. 410.2021, 25 March, p. 1-7 7 p., 126959.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    Influence of the Silver Content on Mechanical Properties of Ti-Cu-Ag Thin Films

    Rashid, S., Sebastiani, M., Mughal, M. Z., Daniel, R. & Bemporad, E., 9 Feb 2021, In: Nanomaterials. 11.2021, 2, 14 p., 435.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Ion irradiation-induced localized stress relaxation in W thin film revealed by cross-sectional X-ray nanodiffraction

    Hlushko, K., Mackova, A., Zalesak, J., Burghammer, M., Davydok, A., Krywka, C., Daniel, R., Keckes, J. & Todt, J., 7 Feb 2021, In: Thin solid films. 722.2021, 31 March, 6 p., 138571.

    Research output: Contribution to journalArticleResearchpeer-review

  9. Published

    Direct determination of the area function for nanoindentation experiments

    Saringer, C., Tkadletz, M., Kratzer, M. & Cordill, M. J., 5 Feb 2021, In: Journal of materials research (JMR). 36.2021, 11, p. 2154-2165 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Evolution of the thermal conductivity of arc evaporated fcc-Ti1-x-yAlxTayN coatings with increasing Ta content

    Waldl, H., Tkadletz, M., Winkler, M., Großmann, B., Czettl, C., Pohler, M. & Schalk, N., 25 Jan 2021, In: Surface & coatings technology. 2021, 406, 6 p., 126658.

    Research output: Contribution to journalArticleResearchpeer-review

  11. Published

    In-situ investigation of the oxidation behavior of powdered TiN, Ti(C,N) and TiC coatings grown by chemical vapor deposition

    Kainz, C., Schalk, N., Saringer, C. & Czettl, C., 25 Jan 2021, In: Surface & coatings technology. 406.2021, 25 January, 6 p., 126633.

    Research output: Contribution to journalArticleResearchpeer-review

  12. E-pub ahead of print

    Improved electro-mechanical reliability of flexible systems with alloyed Mo-Ta adhesion layers

    Kreiml, P., Rausch, M., Terziyska, V., Köstenbauer, H., Winkler, J., Mitterer, C. & Cordill, M. J., 9 Jan 2021, (E-pub ahead of print) In: Thin solid films. 720.2021, 28 February, 9 p., 138533.

    Research output: Contribution to journalArticleResearchpeer-review

  13. Published

    Effect of Pt nanoparticle decoration on the H2 storage performance of plasma-derived nanoporous graphene

    Kostoglou, N., Liao, C.-W., Wang, C.-Y., Kondo, J. N., Tampaxis, C., Steriotis, T., Giannakopoulos, K., Kontos, A. G., Hinder, S. J., Baker, M., Bousser, E., Matthews, A., Rebholz, C. & Mitterer, C., Jan 2021, In: Carbon. 171, 171, p. 294-305 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published
  15. Published
  16. Published

    Design of Functional Materials: A Journey from Hard Coatings to Multifunctional Thin Films

    Schalk, N., 2021

    Research output: ThesisHabilitation thesispeer-review

  17. Published

    Evolution of structure, residual stress, thermal stability and wear resistance of nanocrystalline multilayered Al0.7Cr0.3N-Al0.67Ti0.33N coatings

    Spor, S., Jäger, N., Meindlhumer, M., Hruby, H., Burghammer, M., Nahif, F., Mitterer, C., Keckes, J. & Daniel, R., 2021, In: Surface & coatings technology. 425.2021, 15 November, 9 p., 127712.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published
  19. Published
  20. Published
  21. Published
  22. Published
  23. Published
  24. Published
  25. Published

    Tribological properties of sputter-deposited Mo films on polyimide

    Kobierska, E., Hirn, S., Cordill, M. J., Franz, R. & Rebelo de Figueiredo, M., 2021.

    Research output: Contribution to conferencePosterResearch

  26. 2020
  27. Published

    Microstructural Effects on the Interfacial Adhesion of Nanometer-Thick Cu Films on Glass Substrates: Implications for Microelectronic Devices

    Lassnig, A., Terziyska, V. L., Zalesak, J., Jörg, T., Toebbens, D. M., Griesser, T., Mitterer, C., Pippan, R. & Cordill, M. J., 28 Dec 2020, In: ACS Applied Nano Materials. 4.2021, 1, p. 61-70 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  28. Published

    Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM

    Moritz, Y., Saringer, C., Tkadletz, M., Stark, A., Schell, N., Letofsky-Papst, I., Czettl, C., Pohler, M. & Schalk, N., 25 Dec 2020, In: Surface & coatings technology. 404.2020, 25 December, 9 p., 126632.

    Research output: Contribution to journalArticleResearchpeer-review

  29. Published

    Role of layer order on the equi-biaxial behavior of Al/Mo bilayers

    Cordill, M. J., Kreiml, P., Putz, B., Mitterer, C., Thiaudière, D., Mocuta, C., Renault, P.-O. & Faurie, D., 10 Dec 2020, In: Scripta materialia. 194.2021, 15 March, 5 p., 113656.

    Research output: Contribution to journalArticleResearchpeer-review

  30. Published

    Boron Nitride Nanotubes Versus Carbon Nanotubes: A Thermal Stability and Oxidation Behavior Study

    Kostoglou, N., Tampaxis, C., Charalambopoulou, G., Constantinides, G., Ryzhkov, V., Doumanidis, C. C., Matovic, B., Mitterer, C. & Rebholz, C., 5 Dec 2020, In: Nanomaterials. 10.2020, 12, 9 p., 2435.

    Research output: Contribution to journalArticleResearchpeer-review

  31. E-pub ahead of print

    Evolution of stress fields during crack growth and arrest in a brittle-ductile CrN-Cr clamped-cantilever analysed by X-ray nanodiffraction and modelling

    Meindlhumer, M., Brandt, L. R., Zalesak, J., Rosenthal, M., Hruby, H., Kopecek, J., Salvati, E., Mitterer, C., Daniel, R., Todt, J., Keckes, J. & Korsunsky, A. M., 28 Nov 2020, (E-pub ahead of print) In: Materials and Design. 2021, 198, 16 p., 109365.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Multi-scale interface design of strong and damage resistant hierarchical nanostructured materials

    Daniel, R., Meindlhumer, M., Zalesak, J., Baumegger, W., Todt, J., Ziegelwanger, T., Keckes, J., Mitterer, C. & Keckes, J., Nov 2020, In: Materials and Design. 196, November, p. 1-11 109169.

    Research output: Contribution to journalArticleResearchpeer-review

  33. Published

    Nanoindentation and microbending analyses of glassy and crystalline Zr([sbnd]Hf)[sbnd]Cu thin-film alloys

    Haviar, S., Kozák, T., Meindlhumer, M., Zítek, M., Opatová, K., Kučerová, L., Keckes, J. & Zeman, P., 15 Oct 2020, In: Surface and Coatings Technology. 399, 126139.

    Research output: Contribution to journalArticleResearchpeer-review

  34. Published

    Thermal stability of MoNbTaVW high entropy alloy thin films

    Xia, A. & Franz, R., Oct 2020, In: Coatings. 10, 10, p. 1-8 8 p., 941.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Cycled hydrogen permeation through Armco iron – A joint experimental and modeling approach

    Drexler, A., Siegl, W., Ecker, W., Tkadletz, M., Klösch, G., Schnideritsch, H., Mori, G. K., Svoboda, J. & Fischer, F.-D., 23 Sept 2020, In: Corrosion science. 176.2020, November, 11 p., 109017.

    Research output: Contribution to journalArticleResearchpeer-review

  36. E-pub ahead of print

    Influence of the nitrogen content on the structure and properties of MoNbTaVW high entropy alloy thin films

    Xia, A., Dedoncker, R., Glushko, O., Cordill, M. J., Depla, D. & Franz, R., 20 Aug 2020, (E-pub ahead of print) In: Journal of alloys and compounds. 850.2021, 5 January, 11 p., 156740.

    Research output: Contribution to journalArticleResearchpeer-review

  37. Published

    Nanoscale stress distributions and microstructural changes at scratch track cross-sections of a deformed brittle-ductile CrN-Cr bilayer

    Meindlhumer, M., Zalesak, J., Ecker, W., Rosenthal, M., Niese, S., Gawlitza, P., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 5 Aug 2020, In: Materials & design. 195.2020, October, 16 p., 109023.

    Research output: Contribution to journalArticleResearchpeer-review

  38. Published

    Microstructure, mechanical and thermo-physical properties of CVD TiCxN1-x coatings on cemented carbide substrates grown with C2H6 as C feeding precursor

    Kainz, C., Schalk, N., Tkadletz, M., Winkler, M. & Czettl, C., 25 Jul 2020, In: Surface & coatings technology. 394.2020, 25 July, 7 p., 125868.

    Research output: Contribution to journalArticleResearchpeer-review

  39. Published

    Near-interface cracking in a TiN coated high speed steel due to combined shear and compression under cyclic impact loading

    Gsellmann, M., Klünsner, T., Mitterer, C., Marsoner, S., Skordaris, G., Bouzakis, K., Leitner, H. & Ressel, G., 25 Jul 2020, In: Surface & coatings technology. 394.2020, 25 July, 6 p., 125854.

    Research output: Contribution to journalArticleResearchpeer-review

  40. Published

    Surface oxidation of nanocrystalline CVD TiB2 hard coatings revealed by cross-sectional nano-analytics and in-situ micro-cantilever testing

    Gruber, D. P., Zalesak, J., Todt, J., Tkadletz, M., Sartory, B., Suuronen, J. P., Ziegelwanger, T., Czettl, C., Mitterer, C. & Keckes, J., 20 Jul 2020, In: Surface and Coatings Technology. 399.2020, 15 October, 9 p., 126181.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    Reactively sputtered TiN/SiO2 multilayer coatings with designed anisotropic thermal conductivity – From theoretical conceptualization to experimental validation

    Tkadletz, M., Lechner, A., Schalk, N., Sartory, B., Winkler, M. & Mitterer, C., 15 Jul 2020, In: Surface & coatings technology. 393.2020, 15 July, 9 p., 125763.

    Research output: Contribution to journalArticleResearchpeer-review

  42. Published
  43. Published

    Tailoring hardness and fracture toughness of TiN-based CVD coatings

    Kainz, C., Schalk, N., Tkadletz, M., Mitterer, C. & Czettl, C., 8 Jul 2020.

    Research output: Contribution to conferencePosterResearch

  44. Published
  45. Published

    Thermal crack formation in TiCN/α-Al2O3 bilayer coatings grown by thermal CVD on WC-Co substrates with varied Co content

    Stylianou, R. P., Velic, D., Daves, W., Ecker, W., Tkadletz, M., Schalk, N., Czettl, C. & Mitterer, C., 25 Jun 2020, In: Surface & coatings technology. 392.2020, 25 June, 11 p., 125687.

    Research output: Contribution to journalArticleResearchpeer-review

  46. Published

    Extraordinary high-temperature behavior of electrically conductive Hf7B23Si22C6N40 ceramic film

    Zeman, P., Zuzjaková, Čerstvý, R., Houška, J., Shen, Y., Todt, J., Jiang, J., Daniel, R., Keckes, J., Meletis, E. I. & Vlček, J., 15 Jun 2020, In: Surface and Coatings Technology. 391.2020, 15 June, 8 p., 125686.

    Research output: Contribution to journalArticleResearchpeer-review

  47. Published

    Influence of spinodal decomposition and fcc →w phase transformation on global and local mechanical properties of nanolamellar CVD fcc-Ti1-xAlxN coatings

    Tkadletz, M., Lechner, A., Schalk, N., Sartory, B., Stark, A., Schell, N., Saringer, C., Mitterer, C. & Czettl, C., 12 May 2020, In: Materialia. 11.2020, June, 8 p., 100696.

    Research output: Contribution to journalArticleResearchpeer-review

  48. Published

    Sputter deposition of NiW films from a rotatable target

    Rausch, M., Golizadeh Najafabadi, M., Kreiml, P., Cordill, M., Winkler, J. & Mitterer, C., 1 May 2020, In: Applied surface science. 511.2020, 1 May, 7 p., 145616.

    Research output: Contribution to journalArticleResearchpeer-review

  49. Published

    Multivariable control of ball-milled reactive material composition and structure

    Aureli, M., Doumanidis, C. C., Suliman Hussien, A. G., Jaffar, S. M., Kostoglou, N., Liao, Y., Rebholz, C. & Doumanidis, C. C., May 2020, In: Journal of manufacturing processes. 53.2020, May, p. 238-249 12 p.

    Research output: Contribution to journalArticleResearchpeer-review

  50. E-pub ahead of print

    Insights into surface modification and erosion of multi-element arc cathodes using a novel multilayer cathode design

    Golizadeh Najafabadi, M., Anders, A., Mendez Martin, F., Kolozsvári, S. & Franz, R., 16 Mar 2020, (E-pub ahead of print) In: Journal of applied physics. 127.2020, 11, 10 p., 113301.

    Research output: Contribution to journalArticleResearchpeer-review

  51. Published

    Microstructural characterization of medium entropy alloy thin films

    Chawake, N., Zálešák, J., Gammer, C., Franz, R., Cordill, M. J., Kim, J. T. & Eckert, J., 1 Mar 2020, In: Scripta materialia. 177.2020, 1 March, p. 22-26 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Nanoscale residual stress and microstructure gradients across the cutting edge area of a TiN coating on WC –Co

    Meindlhumer, M., Jäger, N., Spor, S., Rosenthal, M., Keckes, J., Hruby, H., Mitterer, C., Daniel, R., Keckes, J. & Todt, J., 29 Feb 2020, In: Scripta materialia. 182.2020, June, p. 11-15 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

Previous 1 2 3 4 5 6 7 8 ...14 Next