Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

201 - 250 out of 1,066Page size: 50

Research output

  1. 2021
  2. Published

    Simulation of the reactions in the ladle during the BOF steel tapping

    You, D., Bernhard, C., Mayer, P., Fasching, J., Kloesch, G., Rössler, R. & Ammer, R., 12 Sept 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Potential and limitations of direct austenite grain growth measurement by means of HT-LSCM

    Fuchs, N. & Bernhard, C., Sept 2021, In: Materials Today Communications. 28.2021, September, 12 p., 102468.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Influence of Slag Viscosity and Composition on the Inclusion Content in Steel

    You, D., Bernhard, C., Mayerhofer, A. & Michelic, S. K., 21 Aug 2021, In: ISIJ international. 61.2021, 12, p. 2991-2997 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Simulation of the Refining Process of Ultra-Low Carbon (ULC) Steel

    You, D., Bernhard, C., Viertauer, A. & Linzer, B., 30 Jul 2021, In: Crystals. 11.2021, 8, 13 p., 893.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Experimental determination of the MnO activity coefficient in high-manganese slags using the chemical equilibrium method

    Cheremisina, E., Gao, X., Ueda, S., Kitamura, S. Y., Yamashina, R. & Schenk, J., 26 Jul 2021, (E-pub ahead of print) In: Metals. 11.2021, 8, 13 p., 1190.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    An Assessment of Analytical Liquidus Equations for Fe-C-Si-Mn-Al-P-Alloyed Steels Using DSC/DTA Techniques

    Bernhard, M. C., Presoly, P., Bernhard, C., Hahn, S. & Ilie, S., 29 Jun 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 2821-2830 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Effect of Prior Oxidation on the Reduction Behavior of Magnetite-Based Iron Ore During Hydrogen-Induced Fluidized Bed Reduction

    Zheng, H., Spreitzer, D., Wolfinger, T., Schenk, J. & Xu, R., 1 Jun 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 4, p. 1955-1971 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modeling of the BOF Tapping Process: The Reactions in the Ladle

    You, D., Bernhard, C., Mayer, P., Fasching, J., Kloesch, G., Rössler, R. & Ammer, R., Jun 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 3, p. 1854-1865 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Measurements methodologies for basic oxygen furnace cold modeling

    Gonçalves, F., Ribeiro, M. A., Correa, R., Silva, R., Braga, B., Maia, B. T., Tavares, R. P., De Carvalho, D. A. G. & Schenk, J., 4 May 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 13.2021, July-August, p. 834-856 23 p.

    Research output: Contribution to journal › Review article › peer-review

  11. E-pub ahead of print

    Review on the Oxidation Behaviors and Kinetics of Magnetite in Particle Scale

    Zheng, H., Schenk, J., Spreitzer, D., Wolfinger, T. & Daghagheleh, O., 3 May 2021, (E-pub ahead of print) In: Steel research international.

    Research output: Contribution to journal › Review article › peer-review

  12. E-pub ahead of print

    Statistical Analysis of the Inclusions in Rare Earth-M (M = Ca and Ti) Treated Steel

    Xie, Y., Song, M., Wang, B., Zhu, H., Xue, Z., Mayerhofer, A., Michelic, S. K., Bernhard, C. & Schenk, J., 29 Apr 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Characterization of the gamma-loop in the Fe-P system by coupling DSC and HT-LSCM with complementary in-situ experimental techniques

    Bernhard, M. C., Fuchs, N., Presoly, P., Angerer, P., Friessnegger, B. & Bernhard, C., Apr 2021, In: Materials characterization. 174, April, 17 p., 111030.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Influence of slag properties on the behavior of nonmetallic inclusions

    You, D., Bernhard, C. & Michelic, S. K., 21 Feb 2021.

    Research output: Contribution to conference › Abstract › peer-review

  15. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    An integrated approach for near-process modelling of the continuous casting of steel

    Santos, G., Bernhard, C., Bernhard, M. C., Taferner, M., Preuler, L., Ilie, S. & Laschinger, J., 2021, Proceedings of the 9th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Auswirkungen intergranularer Oxidation auf die Oberflächenrissbildung beim Stranggießen von Stahl

    Gaiser, G., 2021

    Research output: Thesis › Master's Thesis

  18. Published

    BOF Cold Model: Mixing time study at multiphase conditions

    Godinho de Carvalho, D. A., 2021

    Research output: Thesis › Doctoral Thesis

  19. Published

    Conclusions on AlN-precipitation kinetics in steel from HT-LSCM austenite grain growth observations

    Fuchs, N., 2021

    Research output: Thesis › Doctoral Thesis

  20. Published

    Enhanced Characterization of Non-Metallic Inclusions for (Sub) Micro Steel Cleanness Evaluations

    Mayerhofer, A., 2021

    Research output: Thesis › Doctoral Thesis

  21. Published

    Ermittlung der Grundlagen für die Skalierung von Plasma-Schmelzreduktionsreaktoren für die Eisenherstellung

    Zarl, M. A., 2021

    Research output: Thesis › Doctoral Thesis

  22. Published

    Evaluation of dissolution rate and behaviour of MgO carriers for primary and secondary metallurgical slags

    Cheremisina, E., Schenk, J., Viertauer, A., Nilica, R. & Rössler, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  23. Published

    Fatigue crack growth of deformed pearlitic rail steels under multiaxial loading

    Schnalzger, G., Maierhofer, J., Daves, W., Pippan, R. & Hohenwarter, A., 2021, In: Procedia Structural Integrity. 39, C, p. 313-326 14 p.

    Research output: Contribution to journal › Conference article › peer-review

  24. Published

    Gibbs energy minimization and particle dissolution

    Ogris, D., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Presentation › Research › peer-review

  25. Published

    Influence of phosphorus on high-temperature phase transformations in steel

    Bernhard, M. C., 2021

    Research output: Thesis › Doctoral Thesis

  26. Published

    Iron

    Schenk, J., 2021, Kirk‐Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Großbritannien, p. 1-41 41 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Parameterevaluierung für den kontinuierlichen Chargiervorgang von Eisenerzen und Zuschlägen im Wasserstoff-Plasma-Schmelzreduktionsprozess

    Cejka, J., 2021

    Research output: Thesis › Master's Thesis

  28. Published

    Processing and utilization of steelmaking slags in the European Union

    Schenk, J. & Draxler, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Static dissolution evaluation of dolomite-based materials in EAF-type slag

    Scheiber, S., Cheremisina, E., Rieger, J., Schenk, J., Firsbach, F., Johnson, W., Chopin, T. & Nispel, M., 2021.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Thermische Analyse des Aufschmelzverhaltens von Direct Reduced Iron

    Kern, M., 2021

    Research output: Thesis › Master's Thesis

  31. Published

    Thermodynamic and kinetic modelling of the dissolution process of lime particles in BOF slags

    Ogris, D. M., Schenk, J. & Gamsjäger, E., 2021.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Untersuchung ausgewählter Einflüsse auf Kinetik und Morphologie der wasserstoffbasierten Reduktion von Eisenerzkonzentraten

    Engel, J. K., 2021

    Research output: Thesis › Master's Thesis

  33. 2020
  34. Published

    K1-MET—A Success Story Since Almost 20 Years

    Rieger, J., Schenk, J., Buergler, T., Kofler, I., Schatzl, M. & Huemer, G., Dec 2020, In: Steel research international. 91.2020, 12, 4 p., 2000233.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Special Issue: K1‐MET – Competence in Advanced Metallurgical and Environmental Process Development

    Schenk, J. (Guest editor) & Bürgler, T. (Guest editor), Dec 2020, In: Steel research international. 91.2020, 12

    Research output: Contribution to journal › Special issue › Research › peer-review

  36. Published

    Modeling of Ladle Refining Process Considering Mixing and Chemical Reaction

    You, D., Michelic, S. K. & Bernhard, C., 1 Nov 2020, In: Steel research international. 91.2020, 11, 9 p., 2000045.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Evaluation of the Iron Content in Non-Metallic Inclusions in Steel for (Sub)microscopic Steel Cleanness Description

    Mayerhofer, A., Michelic, S. K., Presoly, P. & Bernhard, C., 22 Oct 2020, p. 1-9.

    Research output: Contribution to conference › Paper › peer-review

  38. Published

    Investigation of Fe–C–Cr and Fe–C–Cr–Ni-based systems with the use of DTA and HT-LSCM methods

    Drozdová, Ľ., Smetana, B., Presoly, P., Novák, V., Machů, M., Bernhard, M., Francová, H., Zlá, S., Řeháčková, L. & Bernhard, C., 1 Oct 2020, In: Journal of Thermal Analysis and Calorimetry. 142, 2, p. 535-546 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    A study on the stability fields of arc plasma in the hpsr process

    Zarl, M. A., Farkas, M. A. & Schenk, J., Oct 2020, In: Metals. 10.2020, 10, p. 1-22 22 p., 1394.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Fluidization behavior and reducibility of iron ore fines during hydrogen-induced fluidized bed reduction

    Spreitzer, D. & Schenk, J., Oct 2020, In: Particuology. 52, p. 36-46 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    From henry bessemer’s invention to comprehensive converter process optimization

    Bazhin, V. Y., Schenk, J., Konovalov, G. V. & Kosovtseva, T. R., Oct 2020, In: Cvetnye metally. 2020, 10, p. 88-95 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Study on inclusion evolution through Si/Mn deoxidation in medium-carbon steels

    Kirchheimer, K., Schnitzer, R., Klösch, G., Fasching, J., Bernhard, C. & Michelic, S., 3 Sept 2020, Proceedings of the Iron and Steel Technology Conference, AISTech 2020. p. 1491-1502 12 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    METHOD OF RECYCLING OIL-OILY-CONTAMINATED WASTES, OILY SCALE, COKE-CHEMICAL WASTES

    Хуснутдинов, И. Ш. (Inventor), Хуснутдинов, С. И. (Inventor), Алексеева, А. А. (Inventor), Бажин, В. Ю. (Inventor), Дубовиков, О. А. (Inventor) & Иоганн, Л. Ш. (Inventor), 21 Aug 2020, IPC No. F23G 5/ 027 A I, Patent No. RU2730304, Priority date 19 Mar 2019, Priority No. RU20190107878

    Research output: Patent

  44. Published

    Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

    Bernhard, M. C., Presoly, P., Fuchs, N., Bernhard, C. & Kang, Y.-B., 23 Jul 2020, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 10, p. 5351-5364 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Experimental Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

    Krobath, R. & Bernhard, C., 7 Jul 2020, In: Steel research international. 91.2020, 10, 8 p., 2000234.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Microstructural evolution of metallurgical coke: Evidence from Raman spectroscopy

    Rantitsch, G., Bhattacharyya, A., Günbati, A., Schulten, M.-A., Schenk, J., Letofsky-Papst, I. & Albering, J., 1 Jul 2020, In: International journal of coal geology. 227.2020, 1 July, 12 p., 103546.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Study on the Possible Error Due to Matrix Interaction in Automated SEM/EDS Analysis of Nonmetallic Inclusions in Steel by Thermodynamics, Kinetics and Electrolytic Extraction

    Mayerhofer, A., You, D., Presoly, P., Bernhard, C. & Michelic, S. K., 29 Jun 2020, In: Metals : open access journal . 10.2020, 7, p. 1-16 16 p., 860.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Critical evaluation and thermodynamic modeling of the Fe–P and Fe–C–P system

    Bernhard, M. C., Kang, Y.-B., Presoly, P., Gheribi, A. & Bernhard, C., 15 Jun 2020, In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 70.2020, September, 101795.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Structural Features and Combustion Behaviour of Waste Bamboo Chopstick Chars Pyrolysed at Different Temperatures

    Xu, R., Deng, S., Wang, W., Schenk, J. & Wang, F., 1 Jun 2020, In: BioEnergy research . 13.2020, 2, p. 439-451 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Elasto-Viscoplastic Material Model of a Directly-Cast Low-Carbon Steel at High Temperatures

    Krobath, M., Krobath, R., Bernhard, C. & Ecker, W., 15 May 2020, In: Materials. 13.2020, 10, 13 p., 2281.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Tailoring the FeO/SiO2 Ratio in Electric Arc Furnace Slags to Minimize the Leaching of Vanadium and Chromium

    Neuhold, S. F., Algermissen, D., Drissen, P., Adamczyk, B., Presoly, P., Sedlazeck, K. P., Schenk, J., Raith, J., Pomberger, R. & Vollprecht, D., 1 Apr 2020, In: Applied Sciences : open access journal. 10, 7, p. 5249 17 p., 2549.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Utilization of Experimental Data as Boundary Conditions for the Solidification Model Tempsimu-3D

    Preuler, L., Louhenkilpi, S., Bernhard, C., Ilie, S. & Taferner, M., 17 Mar 2020, In: Berg- und hüttenmännische Monatshefte : BHM. 165.2020, 5, p. 237-242 6 p.

    Research output: Contribution to journal › Article › Research

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201