Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

601 - 650 out of 1,066Page size: 50

Research output

  1. 2013
  2. Published

    Modellierung des aluminothermischen Heizens von Stahlschmelzen

    Doppler, T., 2013

    Research output: Thesis › Master's Thesis

  3. Published

    Morphologische Veränderung von nichtmetallischen Einschlüssen bei der Ca-Behandlung von Stahl

    Egger, M. W., 2013, 212 p.

    Research output: Thesis › Doctoral Thesis

  4. Published

    Reduction properties of pellets composed of siderite-manganese ore

    Hanel, M. & Skorianz, M., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Research on Inclusions in Non-quenched and tempered Sulfur-bearing Steel for Autos

    You, D., Cui, H., Wu, H., Yue, F., Tian, E. & Wang, Z., 2013, In: Iron, steel, vanadium, titanium.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Sorption Of Gallium from the Alkali solutions Based on Anionites

    Cheremisina, E., 2013, In: Russian Journal of Non-Ferrous Metals. 54, ISSN 1067-8212, p. 201-108

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Structural Characterization of Metallurgical Coke by Raman Spectroscopy

    Rantitsch, G., Schenk, J., Lünsdorf, K., Bhattacharyya, A., Hanel, M., Wallner, D. & Kaltenböck, H., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 447-448

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Systematische Optimierung von Stahleigenschaften durch nichtmetallische Einschlüsse

    Loder, D., Michelic, S. & Bernhard, C., 2013.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Systematische Untersuchung des Abbrandverhaltens diverser Legierungsmittel im Zuge der sekundärmetallurgischen Behandlung von Stählen

    Eibisberger, G. C., 2013

    Research output: Thesis › Master's Thesis

  10. Published

    Thermodynamic and kinetic modeling of metallurgical reactions

    Lytvynyuk, Y., 2013, 129 p.

    Research output: Thesis › Doctoral Thesis

  11. Published

    Verhalten von Koks unter hochofenähnlichen Bedingungen

    Paul, A., 2013

    Research output: Thesis › Master's Thesis

  12. 2012
  13. Published

    Sind Direktreduktions- und Schmelzreduktionsverfahren Optionen für eine zukünftige effiziente Stahlerzeugung in Europa?

    Schenk, J., 8 Nov 2012.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Improving the analytical characteristics of adsorption semiconductor sensors based on adsorbtion SnO2 using photon simulation

    Cheremisina, E., 5 Sept 2012, In: Russian Journal of Physical Chemistry. 6, p. 228-230 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Verfahren und Vorrichtung zur Herstellung von zumindest teilweise reduzierten Metallerzen und/oder Metallen

    Schenk, J. (Inventor), Eder, T. (Inventor), Hauzenberger, F. (Inventor) & Millner, R. (Inventor), 15 Mar 2012, Patent No. A795/2010

    Research output: Patent

  16. Published

    Integration of the blast furnace route and the FINEX ®- process for low CO 2 hot metal production

    Thaler, C., Tappeiner, T., Schenk, J. L., Kepplinger, W. L., Plaul, J. F. & Schuster, S., 1 Feb 2012, In: Steel research international. 83, 2, p. 181-188 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    A modified cellular automaton method for polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2012, IOP Conf. Series: Materials Science and Engineering. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Anwendungsbeispiele für die Verwendung neuer analytischer Prüftechniken bei Hochleistungsstählen

    Werl, R., Klösch, G., Winkler, W., Pissenberger, A., Egger, M., Aigner, S., Pühringer, J., Michelic, S., Bernhard, C., Schützenhöfer, W., Schneider, R. & Schüller, C., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 194-203

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Asphaltene deposition study and its effects on permeability reduction - A case study (SPE 153512)

    Razavi, S. M., Kharrat, R. & Zargar, Z., 2012, 74th European Association of Geoscientists and Engineers Conference and Exhibition 2012 Incorporating SPE EUROPEC 2012: Responsibly Securing Natural Resources. p. 5097-5108 12 p. (74th European Association of Geoscientists and Engineers Conference and Exhibition 2012 Incorporating SPE EUROPEC 2012: Responsibly Securing Natural Resources).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Austenite grain growth and the surface quality of continuously cast steel

    Dippenaar, R., Bernhard, C., Schider, S. & Wieser, G., 2012, 15th International Conference on Advances in Materials Processing Technologies. p. ID-10318

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Bestimmung der Reduktionseigenschaften von HCI (Hot compacted iron) bei verschiedenen Versuchsbedingungen

    Sikovc, H., 2012

    Research output: Thesis › Master's Thesis

  22. Published

    Bewertung der Reduzierbarkeit und Zerfallsstabilität von unterschiedlichen Phasen in stückigem Erzmöller - Endbericht der ersten Förderphase K1-MET

    Hanel, M., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., Michelic, S., Reip, T. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Charakterisierung von nichtmetallischen Einschlüssen in Titan legierten ferritischen Chromstählen

    Loder, D., 2012

    Research output: Thesis › Master's Thesis

  25. Published

    Classification of fine ores regarding their reducibility with tests in a lab scale fluidized bed reactor and petrographical analysis

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F. & Thaler, C., 2012, AIST 2012 Proceedings. p. 531-542

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Classification of iron ores regarding their reduction behavior in fluidized bed technologies

    Skorianz, M., 2012

    Research output: Thesis › Doctoral Thesis

  27. Published

    Comparison of Basic Oxygen Furnace Bottom Gas Purging Options

    Kollmann, T., Jandl, C., Schenk, J., Mizelli, H., Höfer, W., Viertauer, A. & Hiebler, M., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 8-15

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Continuous Casting Simulation Secondary Cooling

    Arth, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Critical evaluation of prospects and limitations of steel cleanness characterisation using automated SEM/EDS analysis

    Michelic, S., Bernhard, C., Wieser, G. & Lederhaas, B., 2012, Proceedings of the 8th International Conference on Clean Steel. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Determination of Decisive Factors Influencing the Inclusion Landscape in Electroslag Remelted Ingots

    Michelic, S., Tanzer, R., Schützenhöfer, W. & Bernhard, C., 2012, Proceedings of the 1st International Conference on Ingot Casting, Rolling and Forging. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Dynamic Refractory Wear Test Method for Magnesia-Carbon Products

    Goriupp, J., Rief, A. & Schenk, J., 2012, In: RHI bulletin : the journal of refractory innovations. 1, p. 58-62

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    EFFECT OF HIGH-STRENGTH FILLER METALS ON FATIGUE

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2012, In: Welding in the world. 56, 3-4, p. 20-29

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Effect of titanium on the solidification and post-solidification microstructure of high-strength steel welds: IIW Doc. II-C-435-11

    Vanovsek, W., Bernhard, C., Fiedler, M. & Schnitzer, R., 2012

    Research output: Non-textual form › Web publication/site › Research

  34. Published

    Einzelfunkenspektrometrische Charakterisierung des Reinheitsgrades bei Langprodukten

    Werl, R., 2012

    Research output: Thesis › Doctoral Thesis

  35. Published

    Entwicklung einer Methodik zur Bewertung der morphologischen Veränderung von Feineisenerzen während der Reduktion im Wirbelschichtprozess

    Pichler, A., 2012

    Research output: Thesis › Master's Thesis

  36. Published

    Evaluation of reducibility of iron ore fines by reduction tests under fluidized bed conditions and petrographical investigations

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Weiss, B. & Hanel, M., 2012, Proceedings of Asia Steel Conference 2012. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Experimental investigation into the influence of Ti on the clogging of ULC steels in continuous casting

    Bernhard, C., Xia, G., Egger, M., Pissenberger, A. & Michelic, S., 2012, Proceedings of the AISTech 2012. p. 2191-2200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Experimental investigations into surface crack formation under continuous casting conditions

    Krajewski, P., Pierer, R., Bernhard, C., Schaden, T. & Ilie, S., 2012, 5th International Congress on the Science and Technology of Steelmaking. p. Paper-1332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Experimental study on the influence of the Ti/Al ratio and different addition practices on the inclusion landscape in ULC steels

    Michelic, S., Xia, G. & Bernhard, C., 2012, Proceedings of the ASIA Steel International Conference 2012. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Gießwalzen von HSLA Stählen

    Bragin, S., 2012

    Research output: Thesis › Doctoral Thesis

  41. Published

    Identification of defect prone peritectic steel grades by analyzing the high temperature phase transformations

    Presoly, P., Pierer, R. & Bernhard, C., 2012, Defects and Properties of Cast Metals - Solidification Structure and Segregation. p. 299-306

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Inclusion Metallurgy

    Michelic, S., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    In-situ quantification of micro-segregation that occurs during the solidification of steel

    Griesser, S., Reid, M., Pierer, R., Bernhard, C. & Dippenaar, R., 2012, 5th International Conference on the Science and Technology of Steelmaking. p. Paper-1143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Integration of the Blast Furnace Route and the FINEX-Process for Low CO2 Hot Metal Production

    Thaler, C., Tappeiner, T., Schenk, J., Kepplinger, W., Plaul, J. F. & Schuster, S., 2012, In: Steel research international. 83, p. 1-8

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Investigation of Alumina Wetting Fe-Ti, Fe-P and Fe-Ti-P Alloys

    Karasangabo, A. & Bernhard, C., 2012, In: Journal of adhesion science and technology. 26, p. 1141-1156

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012, IOP Confernece Series (MCWASP XIII) - Materials Science and Engineering. p. 012064-012065

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Linking up of HT-LSCM and DSC measurements to characterize phase diagrams of steels

    Presoly, P., Pierer, R. & Bernhard, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Metall-Matrix-Verbundwerkstoffe auf Eisenbasis

    Arth, G., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 306-312

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Metal-Matrix-Composites (MMC)

    Arth, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Mineralogical and structural evolution of iron ore fines reduced in a lab scale fluidized bed reactor

    Skorianz, M., Mali, H., Schenk, J., Plaul, J. F., Pichler, A. & Hanel, M., 2012, Proceedings of 6th International Congress on the Science and Technology of Ironmaking - ICSTI. p. 2347-2359

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Near surface austenite grain growth in different casting processes for steel: Experiments and modeling

    Bernhard, C., Bragin, S. & Vanovsek, W., 2012, ICS 2012. p. Paper-296

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Oberflächenrissbildung beim Stranggießen von Stahl

    Krajewski, P., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...9 10 11 12 13 14 15 16 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201