Chair of Ferrous Metallurgy (220)

Organisational unit: Chair

51 - 100 out of 1,066Page size: 50

Research output

  1. 2024
  2. Published

    Investigations of selected influences on the hydrogen-based reduction of iron ore ultra-fines in a fluidized bed

    Wolfinger, T., 2024

    Research output: Thesis › Doctoral Thesis

  3. Published

    Measurement of diffusion and activity coefficients in slags

    Halwax, A., 2024

    Research output: Thesis › Doctoral Thesis

  4. Published

    Methodenentwicklung zur Herstellung von stickstofflegierten Stählen mittels Laborschmelzen und deren thermodynamischen Charakterisierung im Hochtemperaturbereich

    Donauer, P., 2024

    Research output: Thesis › Master's Thesis

  5. Published

    Methodenentwicklung zur Staubcharakterisierung beim Wasserstoffplasma-Schmelzreduktionsprozess

    Lanzmaier, R., 2024

    Research output: Thesis › Master's Thesis

  6. Published

    Optimization of heat transfer model used in the continuous casting of stainless steel

    Wahib, M., 2024

    Research output: Thesis › Master's Thesis

  7. Published

    Tracing of Non-Metallic Inclusions in Steel by Applying Modern Analytical Techniques

    Thiele, K., 2024, 201 p.

    Research output: Thesis › Doctoral Thesis

  8. Published

    Über die Roheisenraffination der schäumenden Emulsion im LD-Tiegel

    Mitas, B., 2024

    Research output: Thesis › Doctoral Thesis

  9. Published

    Vorhersage des lokalen Wärmeübergangs im Stranggießprozess durch Laborversuche und Regressionsmodelle

    Taferner, M., 2024

    Research output: Thesis › Master's Thesis

  10. 2023
  11. E-pub ahead of print

    Tracing of Deoxidation Products in Ti-Stabilized Interstitial Free Steels by La and Ce on an Industrial and Laboratory Scale

    Truschner, C., Thiele, K., Ilie, S., Rössler, R., Jungreithmeier, A. & Michelic, S. K., 31 Dec 2023, (E-pub ahead of print) In: Steel research international. 95.2024, 3, 15 p., 2300665.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

    Daghagheleh, O., Schenk, J., Zarl, M. A., Lehner, M., Farkas, M. & Zheng, H., 26 Dec 2023, (E-pub ahead of print) In: Energies. 17.2024, 1, 16 p., 167.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Biocoke Thermochemical Properties for Foamy Slag Formations in Electric Arc Furnace Steelmaking

    Kieush, L., Schenk, J., Koveria, A. & Hrubiak, A., 21 Dec 2023, In: Metals. 14.2024, 1, 15 p., 13.

    Research output: Contribution to journal › Article › Research › peer-review

  14. E-pub ahead of print

    Iron ore wires as consumable electrodes for the hydrogen plasma smelting reduction in future green steel production

    Springer, H., de Souza Filho, I. R., Choisez, L., Zarl, M. A., Quick, C., Horn, A. & Schenk, J., 28 Nov 2023, (E-pub ahead of print) In: Sustainable Materials and Technologies. 39.2024, April, 10 p., e00785.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Einfluss der Düsenparameter auf die Kühlbedingungen in der Sekundärkühlzone einer Brammengießanlage

    Taferner, M., Laschinger, J. (Co-editor), Bernhard, C. (Co-editor), Bernhard, M. C. (Co-editor) & Ilie, V.-S. (Co-editor), Nov 2023, In: Berg- und hüttenmännische Monatshefte : BHM. 168.2023, 11, p. 536-542 7 p.

    Research output: Contribution to journal › Article › Research

  16. E-pub ahead of print

    The Behavior of Phosphorus in the Hydrogen-Based Direct Reduction—Smelter Ironmaking Route

    Pfeiffer, A., Thiele, K., Zheng, H., Mali, H., Wimmer, G. & Schenk, J., 27 Oct 2023, (E-pub ahead of print) In: Steel research international. 95.2024, 11, 9 p., 2300268.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Some Considerations on Austenite Grain Growth Kinetics from High-Temperature Laser Scanning Confocal Microscopy Observations

    Bernhard, C., Kern, M. & Bernhard, M. C., 25 Oct 2023, In: Steel research international. 95.2024, 11, 10 p., 2300547.

    Research output: Contribution to journal › Review article › peer-review

  18. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Comparison between image based and tabular data-based inclusion class categorization

    Ramesh Babu, S., Musi, R. & Michelic, S. K., Oct 2023, In: Praktische Metallographie/Practical Metallography. 60.2023, 10, p. 660-675 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Phase equilibria and thermodynamic modeling of the Sn–S, Ag–S, and Sb–S systems

    Bernhard, M. C., Park, W.-B. & Kang, Y.-B., 30 Sept 2023, (E-pub ahead of print) In: Calphad: Computer Coupling of Phase Diagrams and Thermochemistry. 83.2023, December, 20 p., 102622.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    The influence of intergranular oxidation on surface crack formation in continuous casting of steel

    Gaiser, G., Krobath, R., Presoly, P. & Bernhard, C., 23 Sept 2023, (E-pub ahead of print) In: Journal of Materials Research and Technology. 26.2023, September-October, p. 9276-9288 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Comparison between image based and tabular data-based inclusion class categorization

    Ramesh Babu, S., Musi, R. & Michelic, S. K., 14 Sept 2023, Practical Metallography: Praktische Metallographie – Preparation, Imaging and Analysis of Microstructures. 10 ed. de Gruyter, Vol. 60.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Comparison between image based and tabular data-based inclusion class categorization

    Ramesh Babu, S., Musi, R. & Michelic, S. K., 13 Sept 2023.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    Reaction Mechanism of Hot Metal Desulfurization in the KR Process and Application of Red Mud as an Additive to Desulfurization Flux

    Jung, S.-J., Bang, K.-H., Jeong, B.-K., Bernhard, M. C. & Kang, Y.-B., 13 Sept 2023, Conference Proceedings of the International Process Metallurgy Conference (IPMC 2023), Bandung, Indonesia.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Application of tracing techniques to determine the source of alumina inclusions in the clogging layer of Ti-stabilized ULC steels

    Thiele, K., Truschner, C., Walkner, C., Meisel, T. C., Ilie, S., Rössler, R. & Michelic, S. K., 23 Aug 2023, p. 3-7. 5 p.

    Research output: Contribution to conference › Paper

  26. Published

    The impact of tramp elements on the wetting behavior of non-metallic inclusions in a medium-carbon steel

    Cejka, J., Klösch, G. & Michelic, S. K., 23 Aug 2023, p. 8-12. 5 p.

    Research output: Contribution to conference › Paper

  27. Published

    Investigation of the Impact of Biochar Application on Foaming Slags with Varied Compositions in Electric Arc Furnace-Based Steel Production

    Kieush, L. & Schenk, J., Aug 2023, In: Energies. 16.2023, 17, 29 p., 6325.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Prediction of Sinter Chemical Composition Based on Ensemble Learning Algorithms

    Niu, L., Liu, Z., Zhang, J., Sun, Q., Schenk, J., Wang, J. & Wang, Y., 26 Jul 2023, In: Journal of Sustainable Metallurgy. 9.2023, 3, p. 1168-1179 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Different Approaches to Trace the Source of Non-Metallic Inclusions in Steel

    Thiele, K., Ilie, V.-S., Rössler, R., Walkner, C., Meisel, T. C., Prohaska, T. & Michelic, S. K., Jul 2023, In: Iron and Steel Technology. 20.2023, 7, p. 132-137 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Properties of liquid CaO–SiO2 and CaO–SiO2-‘Fe2O3’tot slags measured by a combination of maximum bubble pressure and rotating bob methods

    Cheremisina, E., Kovtun, O., Yehorov, A., Volkova, O. & Schenk, J., 27 Jun 2023, In: Ceramics International. 49.2023, 18, p. 30104-30114 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    A big step back: from multicomponent Fe-alloys to the experimental investigation of the Fe,Mn:Va,C system

    Presoly, P., Bernhard, M. C. & Bernhard, C., 26 Jun 2023.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Development of a thermodynamic database for future control of tramp elements in steelmaking processes

    Bernhard, M. C., Park, W.-B., Presoly, P. & Kang, Y.-B., 25 Jun 2023, Proceedings of 50th International Conference on Computer Coupling of Phase Diagrams and and Thermochemistry (CALPHAD L).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Hot tear prediction in large sized high alloyed turbine steel parts - experimental based calibration of mechanical data and model validation

    Klinkhammer, J., Thorborg, J., Bernhard, M. C., Winkler, J., Bernhard, C., Hanus, R. & Tischler, G., 23 Jun 2023, 16th International Conference on Modelling of Casting, Welding and Advanced Solidification Processes (MCWASP 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Consequences of an increased content of tramp elements in steel on the wetting conditions in the system steel-inclusion-refractory

    Cejka, J., Sammer, B., Preißer, N., Klösch, G. & Michelic, S. K., 16 Jun 2023.

    Research output: Contribution to conference › Paper

  35. Published

    Comparison of tracing deoxidation products with rare earth elements in the industry and on a laboratory scale

    Thiele, K., Truschner, C., Walkner, C., Ilie, S., Rössler, R. & Michelic, S. K., 15 Jun 2023. 8 p.

    Research output: Contribution to conference › Paper

  36. Published

    Development of desulphurization flux for the hot metal in the KR process using recycled red mud as an industrial waste

    Kang, Y.-B., Bernhard, M. C., Bang, K.-H. & Jung, S.-J., 15 Jun 2023, Proceedings of 6th ESTAD (European Steel Technology and Application Days) 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Description of Inclusion Population in a High-Speed Steel produced via Powder Metallurgy

    Schickbichler, M., Hafok, M., Turk, C., Schneeberger, G., Fölzer, A. & Michelic, S. K., 14 Jun 2023, ESATD2023 Procedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Investigation of inclusion evolution in a medium carbon steel through contact with secondary metallurgical slags containing alkali oxides

    Preißer, N., Cejka, J., Thiele, K., Klösch, G. & Michelic, S. K., 14 Jun 2023, Proceedings of ESTAD 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Impurities and tramp elements in steel: Thermodynamic aspects and the application to solidification processes

    Bernhard, M. C., Park, W.-B., Kang, Y.-B., Ilie, S. & Bernhard, C., 13 Jun 2023, Proceedings of 6th ESTAD (European Steel Technology and Application Days) 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Influence of spraying parameters on local surface temperature in slab casting of defect sensitive steel grades: Physical and numerical simulation

    Taferner, M., Bernhard, C., Bernhard, M. C., Laschinger, J. & Ilie, S., 13 Jun 2023, Proceedings of 6th ESTAD (European Steel Technology and Application Days) 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Classification of peritectic steels by experimental methods, computational thermodynamics and plant data: An Overview

    Presoly, P., Kavić, D., Bernhard, C., Hahn, S. & Ilie, S., 12 Jun 2023, Proc. 6th ESTAD.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Evaluation of Slag Foaming Behavior Using Renewable Carbon Sources in Electric Arc Furnace-Based Steel Production

    Kieush, L., Schenk, J., Koveria, A., Hrubiak, A., Hopfinger, H. & Zheng, H., 12 Jun 2023, In: Energies. 16.2023, 12, 25 p., 4673.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    High-temperature oxidation of steel recycled from scrap: The role of tramp elements and their influence on oxidation behavior

    Gaiser, G., Presoly, P. & Bernhard, C., 12 Jun 2023, Proc. 6th ESTAD.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    The Behavior of Direct Reduced Iron in the Electric Arc Furnace Hotspot

    Pfeiffer, A., Ernst, D., Zheng, H., Wimmer, G. & Schenk, J., 18 May 2023, In: Metals. 13.2023, 5, 12 p., 978.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Continuous Casting of Steel: Latest achievements and Future Challenges for Research

    Bernhard, C., 17 May 2023.

    Research output: Contribution to conference › Presentation › Research

  46. E-pub ahead of print

    Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking

    Mitas, B., Visuri, V. V. & Schenk, J., 17 May 2023, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, August, p. 1938–1953 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Tracing the origin of non-metallic inclusions by elemental and isotopic fingerprints

    Thiele, K., Wagner, S., Walkner, C., Meisel, T. C., Irrgeher, J., Prohaska, T. & Michelic, S. K., 11 May 2023.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Different Approaches to Trace the Source of Non-Metallic Inclusions in Steel

    Thiele, K., Ilie, S., Rössler, R., Walkner, C., Meisel, T. C., Prohaska, T. & Michelic, S. K., 9 May 2023, AISTech 2023 - Proceedings of the Iron & Steel Technology Conference. p. 1115-1121 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    High-Temperature Oxidation of Steel under Linear Flow Rates of Air and Water Vapor: An Experimental Determined Set of Data

    Gaiser, G., Presoly, P. & Bernhard, C., 5 May 2023, In: Metals. 13.2023, 5, 17 p., 892.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Decomposition of γ-Fe in 0.4C-1.8Si-2.8Mn-0.5Al steel during a continuous cooling process: A comparative study using in-situ HT-LSCM, DSC and dilatometry

    Liu, M., Bernhard, M. C., Kawulokova, M., Walek, J., Kern, M., Zla, S., Presoly, P., Smetana, B., Tkadleckova, M., Xu, G., Kang, Y.-B. & Bernhard, C., 17 Apr 2023, In: Journal of Materials Research and Technology. 24.2023, May-June, p. 3534-3547 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Thermodynamic modelling of ladle treatment in steelmaking: status and first steps of parametrization by process data

    You, D., Bernhard, C., Rössler, R., Mayer, P. & Kloesch, G., 11 Apr 2023.

    Research output: Contribution to conference › Presentation › Research

  52. Published

    Utilization of Renewable Carbon in Electric Arc Furnace-Based Steel Production: Comparative Evaluation of Properties of Conventional and Non-Conventional Carbon-Bearing Sources

    Kieush, L., Schenk, J., Koveria, A., Rantitsch, G., Hrubiak, A. & Hopfinger, H., 6 Apr 2023, In: Metals. 13.2023, 4, 16 p., 722.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...22 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 2201