Chair of Casting Research (330)

Organisational unit: Chair

351 - 400 out of 434Page size: 50

Research output

  1. 2010
  2. Published

    Simulation von Verzug und Eigenspannung im Druckguss - ein Vergleich zwischen Simulation und Experiment

    Hofer, P., Kaschnitz, E. & Schumacher, P., 2010, In: Gießerei-Rundschau. p. 182-186

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Study of heterogeneous nucleation in high purity Al-Si alloys with Sr addition

    Schumacher, P., Zarif, M. Z. & McKay, B., 2010, Supplemental Proceedings: Volume 2: Materials Characterization, Computation, Modeling and Energy. p. 381-388

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Study of the effect of Strontium (Sr) on the nucleation of eutectic Silicon (Si) in high purity hypoeutectic Al-5Si alloys

    Li, J., Zarif, M. Z. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 506-511

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Study on Mechanical Properties and Microstructures of Mg-6Zn-2Gd-0.6Zr New Sand-Casting Magnesium Alloy

    Yang, G., Li, J., Jie, W. & Yu, Z., 2010, Materials Science Forum.. p. 651-654

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    TEM and APT characterization of solute clustering and precipitation process in a novel Mg-Nd-Gd-Zn-Zr alloy

    Li, J., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    TEM investigation of a novel Fe containing phase in high purity Al-Si-Fe alloys

    Zarif, M. Z., McKay, B., Li, J. & Schumacher, P., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 499-505

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Untersuchung der Legierung THX 540 (AlMg5Si2Mn) in Abhängigkeit von verwendeten Thixoparametern

    Bozorgi, S., Schumacher, P. & Eder, C., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. p. 512-517

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Untersuchung der Modifikation von Graphit in Gusseisen mit Vermiculargraphit

    Geier, G. F., 2010

    Research output: Thesis › Doctoral Thesis

  10. Published

    Vergleich der Graphitmodifikation

    Geier, G., Bauer, W. & Schumacher, P., 2010, In: Giesserei-Praxis. p. 10-15

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2009
  12. Published

    Higher strength magnesium alloy and processing

    Yang, G. (Inventor), Li, J. (Inventor), Jie, W. (Inventor), Yu, Z. (Inventor) & Zhang, R. (Inventor), 10 Jul 2009, Patent No. 200910023290.0

    Research output: Patent

  13. Published

    Casting magnesium alloy and processing

    Yang, G. (Inventor), Li, J. (Inventor), Jie, W. (Inventor), Yu, Z. (Inventor) & Cao, L. (Inventor), 9 Mar 2009, Patent No. 200910021445.7

    Research output: Patent

  14. Published

    2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria Preface

    Schumacher, P., McKay, B., Eck, S. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Assessing Casting Quality using Computed Tomography with advanced Visualization Techniques

    Geier, G., Rosc, J., Hadwiger, M., Fritz, L., Habe, D., Pabel, T. & Schumacher, P., 2009, Shape Casting: The 3rd International Symposium. Campbell, J., Crepean, P. N. & Tiryakioglu, M. (eds.). p. 131-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Atom Probe Tomography Characterization of Early-stage Precipitates in an Mg-Gd-Nd-Zn Alloy

    Sha, G., Li, J., Jie, W. & Ringer, S., 2009, Magnesium Alloys and their Application. p. 40-45

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Characterization of the melt quality and impurity content of an LM25 alloy

    Haberl, K., Schumacher, P., Geier, G. & Stauder, B., 2009, Shape casting: Third International Symposium, TMS 2009. p. 181-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Characterization of the Melt Quality and Impurity Content of an Lm25 Alloy

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2009, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 40B, p. 812-821

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Computed Tomography - A new tool in structural examinations of castings

    Krajewski, W. K., Lelito, J., Suchy, J. S. & Schumacher, P., 2009, In: Archives of metallurgy and materials. 54, 2, p. 335-338 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Dambauer, G., Pabel, T. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 294-300

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 320-324

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Formenkonzept und Ergebnisse gießtechnologischer Versuche zur Legierungsentwicklung im Niederdruckkokillenguss

    Kneißl, C., Pabel, T., Dambauer, G. & Schumacher, P., 2009, In: Gießerei-Rundschau. 56, p. 120-125

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Gusseisen mit Vermiculargraphit - Modifikationsverhalten von Mg, Ce, und La bei unterschiedlichen Impfzuständen

    Geier, G. F., Bauer, W. & Schumacher, P., 2009, In: Gießerei-Rundschau. p. 201-205

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Impurities in Al-5Ti-1B grain refiner rod

    McKay, B. J., Nunner, G., Geier, G. F. & Schumacher, P., 2009, In: International journal of cast metals research. 22, 1-4, p. 212-215 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Niederdruckkokillenguss - Entwicklung eines Kokillensets zur Bestimmung technologischer Eigenschaften von Al-Legierungen im Niederdruckkokillenguss

    Pabel, T., Kneißl, C., Dambauer, G. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 320-324

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Schmelzequalität einer Al-Legierung

    Haberl, K., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Untersuchung der Wechselwirkung zwischen nichtmetallischen Einschlüssen und dynamischer Beanspruchung in Vergütungsstählen

    Rauch, J. A. F., 2009

    Research output: Thesis › Master's Thesis

  28. Published

    Wärmebehandlungsparameter - Einsparpotentiale durch eine modifizierte Wärmebehandlung für untereutektische Aluminium-Silizium Legierungen

    Dambauer, G., Pabel, T. & Schumacher, P., 2009, In: Giesserei-Praxis. p. 294-300

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2008
  30. Published

    Bestimmung der Aufnahmegrenzen bei Computertomographieuntersuchungen

    Wenzl, B., 2008

    Research output: Thesis › Master's Thesis

  31. Published

    Characterization of Nano-precipitates in Mg-2.8Nd-0.6Gd-0.2Zn-0.4Zr (wt %) Alloy

    Li, J., Sha, G., Wang, T., Jie, W. & Ringer, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Characterization of Nano-precipitates in Mg-6Zn-2Cu-0.4Mn (wt %) Alloy

    Li, J., Sha, G., Jie, W. & Ringer, S., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Al-Legierungen

    Haberl, K., Schumacher, P., Geier, G. F. & Stauder, B., 2008, In: Giesserei. 95, 10, p. 48-54

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Die Eignung des Unterdruckdichtetests zur Bestimmung der Schmelzereinheit von Aluminiumlegierungen

    Haberl, K., Schumacher, P. & Geier, G. F., 2008, In: Gießerei-Rundschau. 55, 5/6, p. 100-104

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Effect of gadolinium on the aging hardening behaviour, solidification microstructure and mechanical properties of Mg-Nd-Zn-Zr cast magnesium alloys

    Li, J., Jie, W. & Yang, G., 2008, In: Transactions of Nonferrous Metals Society of China. 18, p. 27-32

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Microstructural evolution of Mg-6Zn-1.5Gd-0.4Zr alloy by semi-solid isothermal heat treatment

    Cao, L., Hao, Q. T., Yang, G. Y. & LI, J., 2008, In: Zhuzao = Foundry. 3

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Semi-solid Processing of Al-Si7-Mg Alloys

    Kamran, M., 2008

    Research output: Thesis › Doctoral Thesis

  38. Published

    Untersuchung der Legierung THX 540 (AlMg5Si2Mn) in Abhängigkeit von verwendeten Thixoparametern

    Bozorgi, S., 2008

    Research output: Thesis › Master's Thesis

  39. Published

    Untersuchung zur Wirkung von Kokillenkühlsystemen im Dauerformguss von Aluminium-Zylinderköpfen

    Krammerbauer, J., 2008, 108 p.

    Research output: Thesis › Master's Thesis

  40. 2007
  41. Published

    Simulation of degassing and purification process of molten aluminum alloys by rotary impeller

    Li, J., Hao, Q. & Yang, G., Feb 2007, In: Tezhong-zhuzao-ji-youse-hejin = Special casting and nonferrous alloys. 27, 2, p. 100-103 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Chemische Beständigkeit von unterschiedlichen Warmarbeitsstählen in Aluminiumschmelzen

    Rechberger, C., 2007

    Research output: Thesis › Diploma Thesis

  43. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., schindelbacher, G. & Schumacher, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Comparison of results of numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Preliminary investigation on the Grain Refinement Behavior of ZrB2 Particles in Mg-Al Alloys

    Klösch, G., McKay, B. & Schumacher, P., 2007, Magnesium Technology.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Schmelzen von Magnesium - Optimierung der Strömungsverhältnisse in einem Magnesiumofen

    Rockenschaub, H., Pabel, T., Sigmund, A., Wohlmuth, P. & Schumacher, P., 2007

    Research output: Non-textual form › Web publication/site › Research

  47. Published

    Schmelzequalität einer Al-Gusslegierung am Beispiel AlSi7MgCu0,5 und LM25

    Faerber, K., 2007

    Research output: Thesis › Master's Thesis

  48. Published

    Simulation and research of degassing and purification process of molten aluminium alloys by rotary impeller: Special Casting and Nonferrous alloys

    Li, J., Yang, G. & Qitang, H., 2007

    Research output: Non-textual form › Web publication/site › Transfer

  49. Published

    Spannungs/Dehnungs-Verhalten und Schwingfestigkeit von Gusseisen mit Lamellengraphit

    Willidal, T., 2007, 265 p.

    Research output: Thesis › Doctoral Thesis

  50. Published

    Study on the Process of Magnesium Alloys Investment Casting

    Yang, G., Jie, W., Qitang, H. & Li, J., 2007, Materials Science Forum.. p. 1019-1021

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. 2006
  52. Published

    57-Fe Mössbauer spectroscopy on cementite Fe3C of steel and nanotube origin - a comparison

    Lichtenberger, A., Geier, G. F., Weber, S., Schifferl, H., Schumacher, P., Kolb, G., Lottermoser, W. & Amthauer, G., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Aspects of modern casting engineering

    Schumacher, P., Pabel, T., Rockenschaub, H., Kaschnitz, E. & Geier, G. F., 2006, International Foundry Conference Portoroz 2006. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006, Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Comparison of results for numerical simulations of castings with x-ray computed tomography reconstructions

    Geier, G. F., Kaschnitz, E., Pabel, T., Schindelbacher, G. & Schumacher, P., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...4 5 6 7 8 9 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 3301