Chair of Automation and Measurement (530)

Organisational unit: Chair

401 - 450 out of 615Page size: 50

Research output

  1. 2010
  2. Published

    Motion deblurring of infrared images from a microbolometer camera

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2010, In: Infrared Physics & Technology. 53, p. 274-279

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Non-Linear Modelling and HIL Simulation of Hydraulic Cylinders for Hydro Turbine Governing System

    Rath, G., O'Leary, P., Zaev, E., Tuneski, A. & Babunski, D., 2010, International Symposium Engergetics 2010. p. 379-391

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Non Rigid Registration

    O'Leary, P. & Badshah, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Non Rigid Registration: Extended with Weighted Bivariate Tensor Polynomial Approximation

    O'Leary, P. & Badshah, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Savitzky-Golay Smoothing for Multivariate Cyclic Measurement Data

    O'Leary, P., Harker, M. & Neumayr, R., 2010, I2MTC 2010 Proceedings. p. 1585-1590

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Thermografische Rissdetektion auf glühendem Draht während des Walzprozesses mit Hinblick auf Ausschussreduzierung. Endbericht

    Oswald-Tranta, B. & Sorger, M., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  8. Published

    Thermographic crack detection and failure classification

    Oswald-Tranta, B., Sorger, M. & O'Leary, P., 2010, In: Journal of electronic imaging. 19, p. 031204-1-031204-7

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Vergleich von 10kW-und 30kW-Generator sowie von Spulen mit 5 bzw. 70 Windungen

    Oswald-Tranta, B. & Sorger, M., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. 2009
  11. Published

    SYSTEM AND METHOD FOR THE DEFECT ANALYSIS OF WORKPIECES

    O'Leary, P. (Inventor) & Oswald-Tranta, B. (Inventor), 23 Sept 2009, IPC No. G01B11/04, Priority date 12 Dec 2006

    Research output: Patent

  12. Published

    Object processing System, Thermographische Rissfindung von einzelnen Metallteilen

    Oswald-Tranta, B. (Inventor) & O'Leary, P. (Inventor), 24 Jun 2009, IPC No. EP2073002 (A1), Patent No. EP 07024827.3., Priority date 20 Dec 2007

    Research output: Patent

  13. Published

    Object processing System: Apparatus and Procedure for the Automatic Processing with a Robot

    O'Leary, P. (Inventor), Harker, M. (Inventor) & Reindl, I. (Inventor), 17 Jun 2009, IPC No. B25J9/16, Patent No. 07024300.1, Priority date 14 Dec 2007

    Research output: Patent

  14. Published

    Automatic 3D Code Reader

    Mörtl, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    CUDA - Rechnen auf der Grafikkarte

    Pura, A., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Development of a Photometric Stereo Measurement System

    Jaindl, G. E., 2009, 74 p.

    Research output: Thesis › Diploma Thesis › peer-review

  17. Published

    Discrete Polynomial Moments for Real-Time Geometric Surface Inspection

    O'Leary, P. & Harker, M., 2009, In: Journal of electronic imaging. 18, p. 013015-013015-13

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Filtering: Cyclic Savitzky-Golay Smoothing for Profile Measurement Data

    O'Leary, P., Harker, M. & Neumayr, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    First Tests on Metallurgical Images for Mechanical Engineering

    O'Leary, P., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Hardware in the Loop Simulation

    Rath, G. & Probst, G., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Integrated solutions for a fully-automated grinding of surface flaws on semi-finished products

    Richter, G., Ofner, R. & Fauster, E., 2009, AISTech 2009 - Proceedings of the Iron and Steel Technology Conference. p. 1133-1149 17 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Laser Distance Sensor Tests

    O'Leary, P., Tuatsop Tiossock, E. & Tenschert, M., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Profile Measurement via Circle-Line Spline Fitting

    Harker, M., O'Leary, P. & Neumayr, R., 2009, Proceedings of the IEEE International Instrumentation and Measurement Technology Conference. p. 1531-1536

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Profile Measurement via Splines

    Harker, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Recognition of 3D Embossed Digits using Discrete Orthogonal Polynomials

    Mörtl, B., O'Leary, P., Harker, M. & Suesut, T., 2009, xx. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Refutal of Claims made in "Surface Reconstruction from Gradient Fields via Gradient Transformations" DOI 10.1007/s11263-009-0302-5

    Harker, M. & O'Leary, P., 2009, In: International Journal of Computer Vision.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Tandem Cold Metal Rolling Mill Control: Authors: John Pittner, Marwan A. Simaan; Review

    Rath, G. (Reviewer), 2009, Springer.

    Research output: Other contribution › Research

  28. Published

    Thermografische Rissdetektion auf glühendem Walzdraht - Status

    Brebric, C. & Oswald-Tranta, B., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Thermografische Rissdetektion auf glühendem Walzdraht - Status 2

    Brebric, C., Sorger, M. & Oswald-Tranta, B., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Thermographical investigations of inductively heated metallic surfaces

    Oswald-Tranta, B. & Sorger, M., 2009, Thermosense XXXI. p. 72990Z-72990Z11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Thermographic crack detection and failure classification

    Oswald-Tranta, B., Fauster, E., Sorger, M. & O'Leary, P., 2009, Thermographic crack detection and failure classification.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Thermo-induktive Inspektion von Gussteilen

    Oswald-Tranta, B. & Sorger, M., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Time-resolved evaluation of inductive pulse heating measurements

    Oswald-Tranta, B., 2009, In: Quantitative infra red thermography (QIRT Journal). 6, p. 3-19

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2008
  35. Published

    Thermographic inspection apparatus

    Oswald-Tranta, B. (Inventor), O'Leary, P. (Inventor) & Wally, G. (Inventor), 30 Jun 2008, IPC No. G01N25/72, Patent No. 09008556.4, Priority date 30 Jun 2008

    Research output: Patent

  36. Published

    SYSTEM AND METHOD FOR THE DEFECT ANALYSIS OF WORKPIECES

    O'Leary, P. (Inventor) & Oswald-Tranta, B. (Inventor), 19 Jun 2008, IPC No. G01B11/04, Priority date 12 Dec 2006

    Research output: Patent

  37. Published

    Direct type-specific conic fitting and eigenvalue bias correction

    Harker, M., O'Leary, P. & Zsombor-Murray, P., 3 Mar 2008, In: Image and vision computing. 26, 3, p. 372-381

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Algebraic and Geometric Techniques for Optimization in Metric Vision

    Harker, M., 2008, 198 p.

    Research output: Thesis › Doctoral Thesis

  39. Published

    An Algebraic Framework for Discrete Basis Functions in Computer Vision

    O'Leary, P. & Harker, M., 2008, Sixth Indian Conference on Computer Vision, Graphics and Image Processing. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Code Identification mittels Light-Sectioning

    O'Leary, P. & Mörtl, B., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Combined Polynomial and Periodic Moments for the Analysis of Measured 3D Surfaces

    O'Leary, P., Harker, M. & Suesut, T., 2008, IEEE International Instrumentation and Measurement Technology Conference 2008. p. 354-358

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Generic Definition of Linked Lines and Circular Arcs - Sadef: Part II

    O'Leary, P., Neumayr, R. & Harker, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Least squares surface reconstruction from measured gradient fields

    Harker, M. & O'Leary, P., 2008, IEEE Conference on Computer Vision and Pattern Recognition. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Line and Circle Splining: Version 2.0

    O'Leary, P., Neumayr, R. & Harker, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Line and Circle Splining: Version 3:0

    Harker, M., O'Leary, P. & Neumayr, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Machbarkeitsstudie RFID

    Pura, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Machbarkeitsstudie RFID, Gesamtbericht

    Pura, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Machbarkeitsstudie VA-Tubulars

    O'Leary, P. & Mörtl, B., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Magneto-thermische Rissprüfung an Auspuffteilen Machbarkeitsstudie

    Oswald-Tranta, B. & Sorger, M., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Measuring and Analyzing Cross-Sectional Profiles of Rotating Objects Using Light Sectioning

    Schalk, P., O'Leary, P., Ofner, R. & Gfrerrer, A., 2008, In: IEEE transactions on instrumentation and measurement. Oct. 2008, p. 2329-2338

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Methods of Statistical Uncertainty Analysis Applied to Evaluation Algorithms of a Video Extensometer System

    O'Leary, P. & Fauster, E., 2008, Electronic Imaging: Image Processing: Machine Vision Applications. SPIE, The Internat. Soc. for Optical Engineering, p. 68130O-1-68130O-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Moments for Real-Time Geometric Surface Inspection

    Suesut, T., 2008

    Research output: Thesis › Doctoral Thesis

  53. Published

    Photometric stereo applied to metallic surface inspection

    Ohenhen, G., 2008

    Research output: Thesis › Diploma Thesis

Previous 1...5 6 7 8 9 10 11 12 13 Next
View graph of relations

Contact information

Peter-Tunner-Straße 25/II, 8700 Leoben
  • Main phone number: +43 3842 402 5301