Towards high-strength electrolyte-supported solid oxide fuel cells

Jana, A., Kraleva, I., Schlacher, J., Supancic, P., Egger, A., Bucher, E. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116929.

Research output: Contribution to journal › Article › Research › peer-review

Understanding the lower fracture resistance of cold sintered ceramics

Jabr, A., Ribul, E., Salamon, D. & Bermejo, R., Feb 2025, In: Journal of the European Ceramic Society. 45, 2, 116968.

Research output: Contribution to journal › Article › Research › peer-review

Contact damage response of alumina-based layered architectures under different loading configurations

Schlacher, J. C., Stücklberger, F., Jabr, A. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 3, 8 p., 117037.

Research output: Contribution to journal › Article › Research › peer-review

Improving contact damage resistance of spinel translucent ceramics through a multi-layer design

Najafzadehkhoee, A., Jabr, A., Talimian, A., Papsik, R., Drdlik, D., Maca, K., Galusek, D. & Bermejo, R., 2025, In: Journal of the European Ceramic Society. 45.2025, 4, 9 p., 117071.

Research output: Contribution to journal › Article › Research › peer-review

Towards high strength SrTiO₃-based composites fabricated at room temperature

Jabr, A., Kuzmić, N., Škapin, S. D., Jantunen, H., Nelo, M., Spreitzer, M. & Bermejo, R., Dec 2024, In: Journal of the European Ceramic Society. 44, 15, 116782.

Research output: Contribution to journal › Article › Research › peer-review

Brittleness reduction of low-carbon Al₂O₃-C refractories with in-situ formation MgAl₂O₄/CNTs layer between aggregate and matrix

Luo, J., Jin, S., Chong, X., Ding, D. & Xiao, G., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2620-2629 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Towards 3D-printed alumina-based multi-material components with enhanced thermal shock resistance

Schlacher, J. C., Geier, S., Schwentenwein, M. & Bermejo, R., Apr 2024, In: Journal of the European Ceramic Society. 44.2024, 4, p. 2294-2303 10 p.

Research output: Contribution to journal › Article › Research › peer-review

The Ball-on-Three-Balls strength test: Effective volumes and surfaces for Weibull strength scaling

Staudacher, M., Eggel, A. E., Supancic, P. H. & Lube, T., 2024, In: Journal of the European Ceramic Society. 44.2024, 1, p. 173-183 11 p.

Research output: Contribution to journal › Article › Research › peer-review

The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

Staudacher, M., Supancic, P. & Lube, T., 16 Aug 2023, In: Journal of the European Ceramic Society. 43.2023, 15, p. 7167-7177 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

Papšík, R., Ševeček, O., Hofer, A.-K., Kraleva, I. R., Kreith, J. & Bermejo, R., 1 Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2928-2934 7 p.

Research output: Contribution to journal › Article › Research › peer-review

CIEC17 – Community Editorial

Jeffs, S., Bache, M., Chevalier, J., Anselmi-Tamburini, U., Bermejo, R. & Jiménez-Piqué, E., Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2725-2727 3 p.

Research output: Contribution to journal › Editorial › peer-review

High-temperature fracture behaviour of layered alumina ceramics with textured microstructure

Schlacher, J. C., Chlup, Z., Hofer, A.-K. & Bermejo, R., Jul 2023, In: Journal of the European Ceramic Society. 43.2023, 7, p. 2917-2927 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Scaling up the cold sintering process of ceramics

Jabr, A., Jones, H. N., Argüelles, A. P., Trolier-McKinstry, S., Randall, C. A. & Bermejo Moratinos, R., 30 May 2023, In: Journal of the European Ceramic Society. 43, 12, p. 5319-5329 11 p.

Research output: Contribution to journal › Article › Research › peer-review

The Ball-on-Three-Balls strength test for discs and plates: Extending and simplifying stress evaluation

Staudacher, M., Lube, T. & Supancic, P. H., Feb 2023, In: Journal of the European Ceramic Society. 43.2023, 2, p. 648-660 13 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramics

Hofer, A.-K., Kraleva, I. R., Prötsch, T., Vratanar, A., Wratschko, M. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2935-2942

Research output: Contribution to journal › Article › Research › peer-review

Micro-scale fracture toughness of textured alumina ceramics

Schlacher, J., Csanádi, T., Vojtko, M., Papšík, R. & Bermejo Moratinos, R., 2023, In: Journal of the European Ceramic Society. 43, 7

Research output: Contribution to journal › Article › Research › peer-review

The effect of liquid phase chemistry on the densification and strength of cold sintered ZnO

Jabr, A., Fanghanel, J., Zongming, F., Bermejo, R. & Randall, C. A., 2023, In: Journal of the European Ceramic Society. 43.2023, 4, p. 1531-1541 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of microporous aggregates and spinel powder on fracture behavior of magnesia-based refractories

Yan, J., Dai, Y., Yan, W., Jin, S., Wang, X. & Li, Y., 13 Sept 2022, (E-pub ahead of print) In: Journal of the European Ceramic Society. 42.2022, 16, p. 7648-7655 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Stereolithography-based additive manufacturing of polymer-derived SiOC/SiC ceramic composites

Essmeister, J., Altun, A. A., Staudacher, M., Lube, T., Schwentenwein, M. & Konegger, T., 6 Jun 2022, In: Journal of the European Ceramic Society. p. 5343-5354

Research output: Contribution to journal › Article › Research › peer-review

Application of an improved testing device for the study of alumina dissolution in silicate slag

Burhanuddin, B., Guarco, J., Harmuth, H. & Vollmann, S., 2 Mar 2022, In: Journal of the European Ceramic Society. 42.2022, 8, p. 3652-3659 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of airborne-particle abrasion of yttria-containing zirconia dental ceramics on mechanical properties before and after regeneration firing

Mirt, T., Abram, A., van del Velde, N., Jerman, I., Bermejo, R., Kocjan, A. & Jevnikar, P., 2022, In: Journal of the European Ceramic Society. p. 5035-5044

Research output: Contribution to journal › Article › Research › peer-review

Distribution distortion in the statistical analysis of strength data when using multiple specimen batches

Salem, J. A., Lube, T., Béhar-Lafenêtre, S. & Baker, E. H., 5 Oct 2021, In: Journal of the European Ceramic Society. 42

Research output: Contribution to journal › Article › Research › peer-review

Phase formation in MgO-C refractories with different antioxidants

Atzenhofer, C. & Harmuth, H., 27 Aug 2021, In: Journal of the European Ceramic Society. 41.2021, 14, p. 7330-7338 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical failure dependence on the electrical history of lead zirconate titanate thin films

Coleman, K., Ritter, M., Bermejo, R. & Trolier-McKinstry, S., Apr 2021, In: Journal of the European Ceramic Society. 41, 4, p. 2465-2471 7 p.

Research output: Contribution to journal › Article › Research › peer-review

Observation of an electrical breakdown at ZnO Schottky contacts in varistors

Kaufmann, B., Billovits, T. & Supancic, P., 2021, In: Journal of the European Ceramic Society. 41, 3, p. 1969-1974

Research output: Contribution to journal › Article › Research › peer-review

A novel approach to assess the mechanical reliability of thin, ceramic-based multilayer architectures

Gruber, M., Kraleva, I. R., Supancic, P. H., Danzer, R. & Bermejo, R., Nov 2020, In: Journal of the European Ceramic Society. 40, 14, p. 4727-4736 10 p.

Research output: Contribution to journal › Article › Research › peer-review

R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

Dai, Y., Harmuth, H., Jin, S., Gruber, D. & Yawei, L., 20 May 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 13, p. 4655-4663 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Strength of additive manufactured alumina

Schlacher, J., Lube, T., Harrer, W., Mitteramskogler, G., Schwentenwein, M., Danzer, R. & Bermejo, R., 21 Apr 2020, (E-pub ahead of print) In: Journal of the European Ceramic Society. 40.2020, 14, p. 4737-4745 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Design of damage tolerant and crack-free layered ceramics with textured microstructure

Hofer, A. K., Walton, R., Ševeček, O., Messing, G. L. & Bermejo, R., 1 Feb 2020, In: Journal of the European Ceramic Society. 40, 2, p. 427-435 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Microstructure, ionic conductivity and mechanical properties of tape-cast Li_1.5Al_0.5Ti_1.5P₃O₁₂ electrolyte sheets

Dashjav, E., Gellert, M., Yan, G., Grüner, D., Kaiser, N., Spannenberger, S., Kraleva, I., Bermejo, R., Gerhards, M. T., Ma, Q., Malzbender, J., Roling, B., Tietz, F. & Guillon, O., 1 Jan 2020, In: Journal of the European Ceramic Society.

Research output: Contribution to journal › Article › Research › peer-review

Mechanical and fracture investigation of magnesia refractories with acoustic emission-based method

Dai, Y., Yawei, L., Jin, S., Harmuth, H., Yan, W. & Xu, X., Jan 2020, In: Journal of the European Ceramic Society. 40.2020, 1, p. 181-191 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Investigation of schottky barriers at Pd-ZnO junctions in varistors

Kaufmann, B., Raidl, N. & Supancic, P. H., 2020, In: Journal of the European Ceramic Society. 40, 11, p. 3771-3775

Research output: Contribution to journal › Article › Research › peer-review

Fracture behaviour of magnesia refractory materials in tension with the Brazilian test

Dai, Y., Li, Y., Xu, X., zhu, Q., Yan, W., Jin, S. & Harmuth, H., Dec 2019, In: Journal of the European Ceramic Society. 39.2019, 16, p. 5433-5441 9 p.

Research output: Contribution to journal › Article › Research › peer-review

A method to characterize asymmetrical three-stage creep of ordinary refractory ceramics and its application for numerical modelling

Schachner, S., Jin, S., Gruber, D. & Harmuth, H., 6 Jun 2019, In: Journal of the European Ceramic Society. 39.2019, 14, p. 4384-4393 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of the phase transformation on fracture behaviour of fused silica refractories

Dai, Y., Yin, Y., Xu, X., Jin, S., Li, Y. & Harmuth, H., 1 Dec 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5601-5609 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Corrigendum to "Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials" [J. Eur. Ceram. Soc. 32 (8) (2012) 1491–1501]

Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2018, In: Journal of the European Ceramic Society. p. 355-358 4 p.

Research output: Contribution to journal › Article › Research › peer-review

Fracture toughness of silicon nitride balls via thermal shock

Strobl, S., Adlmann, F. A., Supancic, P., Lube, T., Danzer, R. & Schöppl, O., 2018, In: Journal of the European Ceramic Society. p. 1278–1287

Research output: Contribution to journal › Article › Research › peer-review

Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs

Belli, R., Wendler, M., Petschelt, A., Lube, T. & Lohbauer, U., 2018, In: Journal of the European Ceramic Society. 38, 16, p. 5533-5544 12 p.

Research output: Contribution to journal › Article › Research › peer-review

Determination of the fracture behaviour of MgO-refractories using multi-cycle wedge splitting test and digital image correlation

Dai, Y., Gruber, D. & Harmuth, H., Dec 2017, In: Journal of the European Ceramic Society. 37.2017, 15, p. 5035-5043 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Strength distribution and fracture analyses of LiNbO₃ and LiTaO₃ single crystals under biaxial loading

Gruber, M., Kraleva, I., Supancic, P., Bielen, J., Kiener, D. & Bermejo, R., Nov 2017, In: Journal of the European Ceramic Society. 37, 14, p. 4397-4406

Research output: Contribution to journal › Article › Research › peer-review

Observation and quantification of the fracture process zone for two magnesia refractories with different brittleness

Dai, Y., Gruber, D. & Harmuth, H., 1 Jun 2017, In: Journal of the European Ceramic Society. 37.2017, 6, p. 2521-2529 9 p.

Research output: Contribution to journal › Article › Research › peer-review

“Toward seashells under stress”: Bioinspired concepts to design tough layered ceramic composites

Bermejo, R., 23 May 2017, In: Journal of the European Ceramic Society. 37, 13, p. 3823-3839 17 p.

Research output: Contribution to journal › Article › Research › peer-review

Corrigendum to "Donor doping of K0.5Na0.5NbO3 ceramics with strontium and its implications to grain size, phase composition and crystal structure" [J. Eur. Ceram. Soc. 37/5 (2017) 2073–2082] (S0955221916307063)(10.1016/j.jeurceramsoc.2016.12.053))

Hreščak, J., Dražić, G., Deluca, M., Arčon, I., Kodre, A., Dapiaggi, M., Rojac, T., Malič, B. & Bencan, A., 2017, In: Journal of the European Ceramic Society. 37, 5, p. 3015 1 p.

Research output: Contribution to journal › Article › Research › peer-review

Donor doping of K0.5Na0.5NbO3 ceramics with strontium and its implications to grain size, phase composition and crystal structure

Hreščak, J., Dražić, G., Deluca, M., Arčon, I., Kodre, A., Dapiaggi, M., Rojac, T., Malič, B. & Bencan, A., 2017, In: Journal of the European Ceramic Society. 37, 5, p. 2073-2082 10 p.

Research output: Contribution to journal › Article › Research › peer-review

Effect of metallization on the strength and fracture behaviour of functional co-fired multilayer ceramics

Gruber, M., Supancic, P., Aldrian, F. & Bermejo, R., 2017, In: Journal of the European Ceramic Society.

Research output: Contribution to journal › Article › Research › peer-review

Electrical fatigue behavior of lead zirconate titanate ceramic under elevated temperatures

Promsawat, M., Deluca, M., Kampoosiri, S., Marungsri, B. & Pojprapai, S., 2017, In: Journal of the European Ceramic Society. 37, 5, p. 2047-2055 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

Harrer, W. S., Schwentenwein, M., Lube, T. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 4331-4338

Research output: Contribution to journal › Article › Research › peer-review

Influence of ferroelectric domain texture on the performance of multilayer piezoelectric actuators

Kaufmann, P., Röhrig, S., Supancic, P. & Deluca, M., 2017, In: Journal of the European Ceramic Society. 37, p. 2039-2046 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Influence of the scatter of strength and of measurement uncertainties on the determination of the subcritical crack growth exponent in ceramics and glasses

Krautgasser, C., Bermejo, R., Supancic, P. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, p. 1873-1878 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Phase formation in Al2O3-C refractories with Al addition

Atzenhofer, C., Gschiel, S. & Harmuth, H., 2017, In: Journal of the European Ceramic Society. 37.2017, 4, p. 1805-1810 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Strength behaviour of etched Zerodur®

Lube, T. & Béhar-Lafenêtre, S., 2017, In: Journal of the European Ceramic Society. 37

Research output: Contribution to journal › Article › Research › peer-review

Surface strength of balls made of five structural ceramic materials evaluated with the Notched Ball Test (NBT)

Strobl, S., Lube, T., Supancic, P., Schöppl, O. & Danzer, R., 2017, In: Journal of the European Ceramic Society. 37, 15, p. 5065-5070 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Enhanced mechanical performance of Al₂O₃-C refractories with nano carbon black and in-situ formed multi-walled carbon nanotubes (MWCNTs)

Liao, N., Li, Y., Jin, S., Sang, S. & Harmuth, H., 1 Feb 2016, In: Journal of the European Ceramic Society. 36.2016, 3, p. 867-874 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data

Othmani, Y., Böhlke, T., Lube, T., Fellmeth, A., Chlup, Z., Colonna, F. & Hashibon, A., 2016, In: Journal of the European Ceramic Society. 36, p. 1109-1125 17 p.

Research output: Contribution to journal › Article › Research › peer-review

Effects of subcritical crack growth on the determination of fracture toughness in brittle materials

Krautgasser, C., Chlup, Z., Supancic, P., Danzer, R. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 1307-1312 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Influence of the surface condition on the biaxial strength of a commercial silicon carbide

Harrer, W., Danzer, R. & Rendtel, A., 2016, In: Journal of the European Ceramic Society. 36, p. 3895-3900 6 p.

Research output: Contribution to journal › Article › Research › peer-review

Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses

Krautgasser, C., Danzer, R., Deluca, M., Supancic, P., Aldrian, F. & Bermejo, R., 2016, In: Journal of the European Ceramic Society. 36, p. 4095-4105 11 p.

Research output: Contribution to journal › Article › Research › peer-review

Thermal shock resistance of magnesia spinel refractories—Investigation with the concept of configurational forces

Gruber, D., Sistaninia, M., Fasching, C. & Kolednik, O., 2016, In: Journal of the European Ceramic Society. 36, p. 4301-4308 9 p.

Research output: Contribution to journal › Article › Research › peer-review

Simulation of micro-crack formation in a magnesia spinel refractory during the production process

Fasching, C., Gruber, D. & Harmuth, H., 25 Aug 2015, In: Journal of the European Ceramic Society. 35, p. 4593-4601 8 p.

Research output: Contribution to journal › Article › Research › peer-review

Design of alumina-zirconia composites with spatially tailored strength and toughness

Chang, Y., Bermejo, R., Sevecek, O. & Messing, G. L., 2015, In: Journal of the European Ceramic Society. 35, p. 631-640

Research output: Contribution to journal › Article › Research › peer-review

Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

Research output: Contribution to journal › Article › Research › peer-review

Quantification of crystalline texture in ferroelectric materials by polarized Raman spectroscopy using Reverse Monte Carlo modelling

Röhrig, S., Krautgasser, C., Bermejo, R., Jones, J. L., Supancic, P. & Deluca, M., 2015, In: Journal of the European Ceramic Society. 35, p. 4321-4325 5 p.

Research output: Contribution to journal › Article › Research › peer-review

Formation of hollow MgO-rich spinel whiskers in low carbon MgO-C refractories with Al additives

Zhu, T., Li, Y., Sang, S., Jin, S. & Wang, H., Dec 2014, In: Journal of the European Ceramic Society. 34, 16, p. 4425-4432

Research output: Contribution to journal › Article › Research › peer-review

A laser irradiation disc test for fracture testing of refractory fine ceramics

Gruber, D. & Harmuth, H., 2014, In: Journal of the European Ceramic Society. 34, p. 4021-4029

Research output: Contribution to journal › Article › Research › peer-review

A new strength test for ceramic cylinders-The Notched Roller Test

Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

Research output: Contribution to journal › Article › Research › peer-review

Compressive creep testing of refractories at elevated loads-Device, material law and evaluation techniques

Jin, S., Harmuth, H. & Gruber, D., 2014, In: Journal of the European Ceramic Society. 34, p. 4037-4042

Research output: Contribution to journal › Article › Research › peer-review

Fractography of biaxial tested Si3N4-specimens

Harrer, W., Morrell, R. & Danzer, R., 2014, In: Journal of the European Ceramic Society. 34, p. 3283-3289

Research output: Contribution to journal › Article › Research › peer-review

Fracture toughness testing of small ceramic discs and plates

Strobl, S., Rasche, S., Krautgasser, C., Sharova, E. & Lube, T., 2014, In: Journal of the European Ceramic Society. p. 1637-1642

Research output: Contribution to journal › Article › Research › peer-review

Mechanical properties of silicon nitride rolling elements in dependence of size and shape

Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

Research output: Contribution to journal › Article › Research › peer-review

Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

Research output: Contribution to journal › Article › Research › peer-review

On the relationship between ceramic strength and tehe requirements for mechanical design

Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 3435-3460

Research output: Contribution to journal › Article › Research › peer-review

Toughness measurement on ball specimens. Part II: Experimental procedure and measurement uncertainties

Strobl, S., Lube, T. & Schöppl, O., 2014, In: Journal of the European Ceramic Society. p. 1881-1892

Research output: Contribution to journal › Article › Research › peer-review

Tensile behaviour of magnesia-spinel refractories: Comparison of tensile and wedge splitting tests

Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Obenaus-Emler, R., Gruber, D. & Harmuth, H., 2013, In: Journal of the European Ceramic Society. 33, p. 913-923

Research output: Contribution to journal › Article › Research › peer-review

Voltage polarity dependent current paths through polycrystalline ZnO varistors

Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

Research output: Contribution to journal › Article › Research › peer-review

An assessment of in vivo failures of alumnia ceramic total hip joint replacements

Morrell, R., Danzer, R., Milosev, I. & Trebse, R., 2012, In: Journal of the European Ceramic Society. 32, p. 3073-3084

Research output: Contribution to journal › Article › Research › peer-review

Exact implementation of subcritical crack growth into a Weibullian strength distribution under constant stress rate conditions

Supancic, P. & Schöpf, H. M., 2012, In: Journal of the European Ceramic Society. 32, p. 4031-4040

Research output: Contribution to journal › Article › Research › peer-review

Influence of deposited metal structures on the failure mechanisms of silicon-based components

Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

Research output: Contribution to journal › Article › Research › peer-review

Influence of measurement uncertainties on the determination of the Weibull modulus

Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

Research output: Contribution to journal › Article › Research › peer-review

Influence of surface defects on the biaxial strength of a silicon nitride ceramic - increase of strength by crack healing

Harrer, W., Danzer, R. & Morrell, R., 2012, In: Journal of the European Ceramic Society. 32, p. 27-35

Research output: Contribution to journal › Article › Research › peer-review

Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia-spinel refractories

Grasset-Bourdel, R., Alzina, A., Huger, M., Chotard, T., Gruber, D. & Harmuth, H., 2012, In: Journal of the European Ceramic Society. 32, p. 989-999

Research output: Contribution to journal › Article › Research › peer-review

Preliminary investigations of the production of MgAlON bonded refractories

Pichlbauer, S., Harmuth, H., Lenčéš, Z. & Šajgalîk, P., 2012, In: Journal of the European Ceramic Society. 32, 9, p. 2013-2018

Research output: Contribution to journal › Article › Research › peer-review

Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

Research output: Contribution to journal › Article › Research › peer-review

Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

Research output: Contribution to journal › Article › Research › peer-review

Effect of commercial anatase-TiO2 raw materials on the electrical characteristics of ceramics with positive temperature coefficient of resistivity

Kirstein, K., Reichmann, K., Preis, W. & Mitsche, S., 2011, In: Journal of the European Ceramic Society. 31, p. 2339-2349

Research output: Contribution to journal › Article › Research › peer-review

Electrical properties and structure of grain boundaries in n-conducting BaTiO3 ceramics

Hou, J., Zhang, Z., Preis, W., Sitte, W. & Dehm, G., 2011, In: Journal of the European Ceramic Society. p. 763-771

Research output: Contribution to journal › Article › Research › peer-review

Strength and fracture analysis of silicon-based components for embedding

Deluca, M., Bermejo Moratinos, R., Pletz, M., Supancic, P. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 549-558

Research output: Contribution to journal › Article › Research › peer-review

Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading

Bermejo Moratinos, R., Supancic, P., Kraleva, I., Morrell, R. & Danzer, R., 2011, In: Journal of the European Ceramic Society. 31, p. 745-753

Research output: Contribution to journal › Article › Research › peer-review

Electrical characterization of ZnO multilayer varistors on the nanometre scale with conductive atomic force microscopy

Schloffer, M., Teichert, C., Supancic, P., Andreev, A., Hou, Y. & Wang, Z., 2010, In: Journal of the European Ceramic Society. 30, p. 1761-1764

Research output: Contribution to journal › Article › Research › peer-review

Fracture resistance of a doped PZT ceramic for multilayer piezoelectric actuators: Effect of mechanical load and temperature

Bermejo Moratinos, R., Grünbichler, H., Kreith, J. & Auer, C., 2010, In: Journal of the European Ceramic Society. 30, p. 705-712

Research output: Contribution to journal › Article › Research › peer-review

Mechanical characterisation of miniaturised direct inkjet printed 3YTZP specimens for microelectronic applications

Özkol, E., Wätjen, A., Bermejo Moratinos, R., Deluca, M., Ebert, J., Danzer, R. & Telle, R., 2010, In: Journal of the European Ceramic Society. 30, p. 3145-3152

Research output: Contribution to journal › Article › Research › peer-review

Modelling of the ferroic material behaviour of piezoelectrics: Characterisation of temperature-sensitive functional properties

Grünbichler, H., Kreith, J., Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2010, In: Journal of the European Ceramic Society. 30, p. 249-254

Research output: Contribution to journal › Article › Research › peer-review

A New test to Determine the Tensile Strength of Brittle Balls-The Notched Ball Test

Danzer, R., Supancic, P., Witschnig, S., Polaczek, E. & Morrell, R., 2009, In: Journal of the European Ceramic Society. p. 2447-2459

Research output: Contribution to journal › Article › Research › peer-review

Development of a Roadmap for Advanced Ceramics

Danzer, R., Rödel, J., Kounga, A. B. N., Weissenberger-Eibl, M., Koch, D., Bierwisch, A., Rossner, W., Hoffmann, M. J. & Schneider, G., 2009, In: Journal of the European Ceramic Society. p. 1549-1560

Research output: Contribution to journal › Article › Research › peer-review

Fracture Statistics of Ceramic Laminates Strengthened by Compressive Residual Stresses

Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1551-1556

Research output: Contribution to journal › Article › Research › peer-review

Optimal Strength and Toughness of Al2O3-ZrO2-Laminates Designed with External or Internal Compressive Layers

Bermejo Moratinos, R., Pascual-Herrero, J., Lube, T. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 1575-1583

Research output: Contribution to journal › Article › Research › peer-review

Processing of YSZ screen printing pastes and the characterization of the electrolyte layers for anode supported SOFC

Ried, P., Lorenz, C., Brönstrup, A., Graule, T., Menzler, N. H., Sitte, W. & Holtappels, P., 2008, In: Journal of the European Ceramic Society. 28, p. 1801-1808

Research output: Contribution to journal › Article › Research › peer-review

Silicon Nitride Tools for Hot Rolling of High Alloyed Steel and Superalloy Wires

Lengauer, M. & Danzer, R., 2008, In: Journal of the European Ceramic Society. 28, p. 2289-2298

Research output: Contribution to journal › Article › Research › peer-review

A Silicon Nitride Reference Material - A Testing Program of ESIS TC6

Lube, T. & Dusza, J., 2007, In: Journal of the European Ceramic Society. 27, p. 1203-1209

Research output: Contribution to journal › Article › Research › peer-review

Effective Elastic Properties and Damping Behaviour of Alumina-Alumina/Zirconia Laminates

Lambrinou, K., van der Biest, O., Lube, T., Tassini, N., Patsias, S., Chalvet, F. & de Portu, G., 2007, In: Journal of the European Ceramic Society. 27, p. 1307-1311

Research output: Contribution to journal › Article › Research › peer-review

Effective Fracture Toughness in Al2O3-Al2O3/ZrO2 Laminates

Lube, T., Pascual-Herrero, J., Chalvet, F. & de Portu, G., 2007, In: Journal of the European Ceramic Society. 27, p. 1449-1453

Research output: Contribution to journal › Article › Research › peer-review