Acta materialia, ‎1359-6454

Journal

ISSNs1359-6454
Additional searchable ISSN (electronic)1873-2453
201 - 250 out of 277Page size: 50

Research output

  1. 2011
  2. Published

    Deformation Mechanisms in Micron-Sized PST-TiAl Compression Samples: Experiment and Model

    Rester, M., Fischer, F. D., Kirchlechner, C., Schmölzer, T., Clemens, H. & Dehm, G., 2011, In: Acta materialia. 59, p. 3410-3421

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Diffusion Processes in a Migrating Interface – The Thick Interface Model

    Svoboda, J., Gamsjäger, E., Fischer, F. D., Liu, Y. & Kozeschnik, E., 2011, In: Acta materialia. 59, p. 4775-4786

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Effect of specimen size on the tensile strength of WC–Co hard metal

    Klünsner, T., Wurster, S., Supancic, P., Ebner, R., Jenko, M., Glätzle, J., Püschel, A. & Pippan, R., 2011, In: Acta materialia. 59, p. 4244-4252

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars

    Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M. W., Micha, J.-S., Ulrich, O. & Dehm, G., 2011, In: Acta materialia. 59, p. 5618-5626

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel

    Rathmayer, G. & Pippan, R., 2011, In: Acta materialia. p. 7228-7240

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Mechanisms controlling the artificial aging of Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Ebner, T. & Uggowitzer, P. J., 2011, In: Acta materialia. 59, p. 3352-3363

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Modelling of Excess Vacancy Annihilation at Different Types of Sinks

    Fischer, F. D., Svoboda, J., Appel, F. & Kozeschnik, E., 2011, In: Acta materialia. 59, p. 3463-3472

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Modelling of the Influence of Sources and Sinks for Vacancies and Stress State on Diffusion in Crystalline Solids

    Svoboda, J. & Fischer, F. D., 2011, In: Acta materialia. 59, p. 1212-1219

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Precipitation hardening of biodegradable Fe-Mn-Pd alloys

    Moszner, F., Sologubenko, A. S., Schinhammer, M., Lerchbacher, C., Hänzi, A. C., Leitner, H., Uggowitzer, P. J. & Löffler, J. F., 2011, In: Acta materialia. p. 981-991

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Size effect of thermal expansion and thermal/intrinsic stresses in nanostructured thin films: Experiment and model

    Daniel, R., Holec, D., Bartosik, M., Keckes, J. & Mitterer, C., 2011, In: Acta materialia. 59, p. 6631-6645

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Source controlled yield and hardening of Cu(100) studied by in situ transmission electron microscopy

    Kiener, D. & Minor, A. M., 2011, In: Acta materialia. 59, p. 1328-1337

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Transient Solute Drag in Migrating Grain Boundaries

    Svoboda, J., Fischer, F. D. & Leindl, M., 2011, In: Acta materialia. 59, p. 6556-6562

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Work hardening in micropillar compression: In situ experiments and modeling

    Kiener, D., Guruprasad, P. J., Keralavarma, S. M., Dehm, G. & Benzerga, A. A., 2011, In: Acta materialia. 59, p. 3825-3840

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2010
  16. Published

    Achieving the ideal strength in annealed Molybdenum nanopillars

    Lowry, M. B., Kiener, D., Le Blanc, B. B., Chisholm, C., Florando, J. N., Morris, J. W. J. & Minor, A. M., 2010, In: Acta materialia. 58, p. 5160-5167

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model

    Cordill, M., Fischer, F. D., Rammerstorfer, F. G. & Dehm, G., 2010, In: Acta materialia. 58, p. 5520-5531

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of Cu on the evolution of precipitation in an Fe-Cr-Ni-Al-Ti maraging steel

    Schnitzer, R., Schober, M., Zinner, S. & Leitner, H., 2010, In: Acta materialia. 58, p. 3733-3741

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Experimental and computational study on the effect of Yttrium on the phase stability of sputtered Cr-Al-Y-N hard coatings

    Rovere, F., Music, D., Schneider, J. M. & Mayrhofer, P. H., 2010, In: Acta materialia. 58, p. 2708-2715

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    In situ TEM study of Bauschinger Effect in Freestanding Nanocrystalline Gold Films

    Rajagoplan, J., Rentenberger, C., Karnthaler, H. P. & Dehm, G., 2010, In: Acta materialia. 58, p. 4772-4782

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Modelling of Diffusional Phase Transformation in Multi-Component Systems with Stoichiometric Phases

    Svoboda, J., Fischer, F. D. & Abart, R., 2010, In: Acta materialia. 58, p. 2905-2911

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Polydimensional modelling of dendritic growth and microsegregation in multicomponent alloys

    Michelic, S., Thuswaldner, J. & Bernhard, C., 2010, In: Acta materialia. 58, p. 2738-2751

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Splitting phenomenon in the precipitation evolution in an Fe-Ni-Al-Ti-Cr stainless steel

    Leitner, H., Schober, M. & Schnitzer, R., 2010, In: Acta materialia. 58, p. 1261-1269

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Stress Development During Reaction of Metallic Nanospheres with Gas

    Svoboda, J. & Fischer, F. D., 2010, In: Acta materialia. 59, p. 61-67

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Substitutional Diffusion in Multicomponent Solids with Non-Ideal Sources and Sinks for Vacancies

    Fischer, F. D. & Svoboda, J., 2010, In: Acta materialia. 58, p. 2698-2707

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    The origin of stresses in magnetron-sputtered thin films with zone T structures

    Daniel, R., Martinschitz, K., Keckes, J. & Mitterer, C., 2010, In: Acta materialia. 58, p. 2621-2633

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

    Pippan, R., Zhang, H. W., Huang, X. & Hansen, N., 2010, In: Acta materialia. p. 1698-1707

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2009
  29. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-I: Model description

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5621-5631 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-II. Model verification

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5632-5644 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening

    Scheu, C., Stergar, E., Schober, M., Cha, L., Clemens, H., Bartels, C., Schimansky, F.-P. & Cerezo, A., 2009, In: Acta materialia. 57, p. 1504-1511

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity

    Motz, C., Weygand, D., Senger, J. & Gumbsch, P., 2009, In: Acta materialia. 57, p. 1744-1754

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Investigation of fracture properties of magnetron-sputtered TiN films by means of a FIB-based cantilever bending technique

    Massl, S., Thomma, W., Keckes, J. & Pippan, R., 2009, In: Acta materialia. 57, p. 1768-1776

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5632-5644

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5621-5631

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Modeling of Formation of Binary-Phase Hollow Nanospheres from Metallic Solid Nanospheres

    Svoboda, J., Fischer, F. D. & Vollath, D., 2009, In: Acta materialia. 57, p. 1912-1919

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Vacancy-Driven Stress Relaxation in Layers

    Svoboda, J. & Fischer, F. D., 2009, In: Acta materialia. 57, p. 4649-4657

    Research output: Contribution to journal › Article › Research › peer-review

  38. 2008
  39. Published

    Structure, elastic properties and phase stability of Cr1–xAlxN

    Mayrhofer, P. H., Music, D., Reeswinkel, T., Fuß, H.-G. & Schneider, J. M., 14 Mar 2008, In: Acta materialia. 56.2008, 11, p. 2469-2475 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    A further step towards an understanding of size-dependent crystal plasticity: In-situ tension experiments of miniaturized single crystal copper samples

    Kiener, D., Grosinger, W., Dehm, G. & Pippan, R., 2008, In: Acta materialia. 56, p. 580-592

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    A model for evolution of shape changing precipitates in multicomponent systems

    Svoboda, J., Fischer, F. D. & Mayrhofer, P. H., 2008, In: Acta materialia. 56, p. 4896-4904

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    From Distribution Functions to evolution equations for grain growth and coasening

    Fischer, F. D., Svoboda, J., Gamsjäger, E. & Oberaigner, E., 2008, In: Acta materialia. 56, p. 5395-5400

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Simulation of Chemically Driven Inelastic Strain in Multi-Component Systems with Non-Ideal Sources and Sinks for Vacancies

    Svoboda, J., Fischer, F. D. & Gamsjäger, E., 2008, In: Acta materialia. 56, p. 351-357

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2007
  45. Published

    A direct method of determining complex depth profiles of residual stresses in thin films on a nanoscale

    Massl, S., Keckes, J. & Pippan, R., 2007, In: Acta materialia. 55, p. 4835-4844

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    A new approach to modelling of non-steady grain growth

    Svoboda, J. & Fischer, F. D., 2007, In: Acta materialia. 55, p. 4467-4474

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    A note on the contact conditions at migrating interfaces

    Gamsjäger, E., 2007, In: Acta materialia. 55, p. 4823-4833

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Discrete dislocation simulation of nanoindentation: Indentation size effect and the influence of slip band orientation

    Kreuzer, H. G. M. & Pippan, R., 2007, In: Acta materialia. 55, p. 3229-3235

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Energetic Balance and Kinetics for the Decomposition of Supersaturated Ti1-XAlXN

    Mayrhofer, P. H., Fischer, F. D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 2007, In: Acta materialia. 55, p. 1441-1446

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    High Temperature Mechanical Behaviour of Flaw Tolerant Almunia-Zirconia Multilayered Ceramics

    Bermejo Moratinos, R., Sánchez-Herencia, A. J., Llanes, L. & Baudín, C., 2007, In: Acta materialia. 55, p. 4891-4901

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    In situ TEM straining of single crystal Au films on polyimide: Change of deformation mechanisms at the nanoscale

    Oh, S. H., Legros, M., Kiener, D., Gruber, P. A. & Dehm, G., 2007, In: Acta materialia. 55, p. 5558-5571

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Kinetics of Solute Driven Melting and Solidification

    Gamsjäger, E., Svoboda, J., Fischer, F. D. & Rettenmayr, M., 2007, In: Acta materialia. 55, p. 2599-2607

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Precipitation Twinning

    Appel, F., Fischer, F. D. & Clemens, H., 2007, In: Acta materialia. 55, p. 4915-4923

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Prediction of Fracture Toughness of a Ceramic Multilayer Composite - Modelling and Experiments

    Chen, C. R., Pascual-Herrero, J., Fischer, F. D., Kolednik, O. & Danzer, R., 2007, In: Acta materialia. 55, p. 409-421

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Size-independent stresses in Al thin films thermally strained down to -100°C

    Eiper, E., Keckes, J., Zizak, I., Cabie, M. & Dehm, G., 2007, In: Acta materialia. 55, p. 1941-1946

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations