Wilfried Eichlseder

101 - 150 out of 287Page size: 50

Research output

  1. 2009
  2. Published

    Bauteilversagen

    Eichlseder, W., 2009, Bauteilversagen, Beitrag im Buch "Leichtbau". p. 49-75

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  3. Published

    Berücksichtigung der Porenverteilung bei der betriebsfesten Auslegung von Aluminium-Druckgussbauteilen

    Oberwinkler, C. & Eichlseder, W., 2009, In: Gießerei-Rundschau. p. 168-173

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, In: Druckguss-Praxis. p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Betriebsfeste Auslegung von Aluminiumdruckgussteilen unter der Berücksichtigung der Porenverteilung im Bauteil

    Oberwinkler, C., Eichlseder, W., Schönfeld, F., Schmidt, S. & Leitner, H., 2009, Gießtechnik im Motorenbau - Anforderungen der Automobilindustrie. p. 173-189

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Pinter, G. & Eichlseder, W., 2009, Kunststoffgerecht simulieren – Auslegung von Spritzgussbauteilen mit CAE. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Comparative studies of hardened surface layers under contact stress

    Trausmuth, A., Godor, I., Stoschka, M. & Eichlseder, W., 2009, Advances in Experimantal Mechanics. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Comparison of gear tooth root stresses by analytical, numerical and experimental evaluation

    Leitner, M., Haberer, C. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 269-270

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Comparison of gear tooth root stresses by analytical, numerical and experimental evaluation

    Leitner, M., Haberer, C. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Creep and Relaxation Behaviour of Mg-Al based Die cast Alloys AZ91 and AE44

    Gerstmayr, G., Leitner, H. & Eichlseder, W., 2009, Creep and Relaxation Behaviour of Mg-Al based Die cast Alloys AZ91 and AE44. GDMB, p. ---

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Creep and Relaxation Behaviour of Self-tapping Al-bolts in Mg Die Cast Alloys for Power Train Components

    Gerstmayr, G. & Eichlseder, W., 2009, Magnesium - 8th International Conference on Magnesium Alloys and their Applications. p. 1097-1106

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Damage Tolerant Design of Mg-HPDC Components

    Oberwinkler, C., Eichlseder, W. & Seebacher, M., 2009, Magnesium. p. 126-132

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Design and analysis methods and tools

    Eichlseder, W., 2009, Volume 1. p. 35-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Development of a Fretting Wear Parameter for Implementation of Wear in a Numerical Analysis

    Christiner, T., Godor, I., Kainzinger, P. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Development of a Fretting Wear Parameter for Implementation of Wear in a Numerical Analysis

    Christiner, T., Godor, I., Kainzinger, P. & Eichlseder, W., 2009, 26th Symposium on Advances in Experimental Mechanics. p. 12-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  17. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 199-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009, 26th symposium on advances in experimental mechanics. p. 271-272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    EFFECTS OF ANISOTROPY AND EFFECTIVE STRAIN ON THE FATIGUE PROPERTIES OF A TITANIUM ALLOY

    Tan, W., Stoschka, M., Riedler, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Effects of temperature and moisture on the tensile/tensile fatigue behavior of an injection molded sgf-reinforced partial aromatic polyamide

    Guster, C., Pinter, G., Eichlseder, W. & Lang, R., 2009, 12th International Conference on Fracture, ICF 13. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Energiebasierende Lebensdauerbewertung von Nickellegierungen

    Köberl, H., Winter, G. & Eichlseder, W., 2009, In: Materialprüfung. 5/2009, p. 276-286

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Estimation of the local porosity of aluminium high-pressure die casting components from casting simulation results using self-organizing maps

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: International foundry research = Giessereiforschung. p. 22-33

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    Experimental methods to investigate the running-in properties of soft coatings

    Grün, F., Gódor, I. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Fatigue Life Behavior of a Hypoid Gear Tooth Root Taking the Influences of Orbital Forging into Account

    Haberer, C., Eichlseder, W., Dietrich, A. & Leitner, H., 2009, SAE World Congress, Paper No. 2009-01-0812. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Fretting wear: Combined numerical and experimental investigations T.

    Christiner, T., Wohlfahrt, M., Reiser, J., Gänser, H.-P., Godor, I. & Eichlseder, W., 2009, MPA-2009 3rd International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Fundamentals of optimizing Aluminium-based journal bearing materials

    Grün, F., Godor, I. & Eichlseder, W., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 777-785

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Funktionsweise und Gebrauchsdauer von Gleitlagerwerkstoffen

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 127-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Improvement of an existing model to estimate the pore distribution for a fatigue proof design of Al hpdc components

    Oberwinkler, C., Leitner, H. & Eichlseder, W., 2009, Shape Casting: 3rd International Symposium. p. 115-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Influence of overlays on the tribological behavior of journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Proceedings of World Tribology Conference (WTC) 2009. p. 131-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Influence of welding process parameters on fatigue by local sub-modelling

    Stoschka, M., Fössl, T., Schörghuber, M. & Eichlseder, W., 2009, 62nd IIW International Conference on Advances in Welding and Allied Technologies. p. 387-392

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Influence of welding process parameters on fatigue life by local sub-modelling

    Stoschka, M., Fössl, T., Schörghuber, M. & Eichlseder, W., 2009, In: Welding in the world. 53, SPECIAL ISSUE, p. 387-392 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Introduction to an approach based on the (α+β) microstructure of elements of alloy Ti-6Al-4V

    Stoschka, M., Tan, W., Eichlseder, W. & Stockinger, M., 2009, Procedia Engineering. 1 ed. Vol. 1. p. 31-34 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Light Weight Design of Ti-6Al-4V Forgings

    Oberwinkler, B., Riedler, M., Eichlseder, W. & Gutknecht, M., 2009, Titanium 2009 Annual Conference Proceedings. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Link from the microstructure to the fatigue lifetime of forged INCONEL 718 components

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M. & Eichlseder, W., 2009, 26th DANUBIA-Adria Symposium 2009. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Local submodelling of single-welded joints

    Fössl, T., Stoschka, M. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Methode zur Berechnung der lokalen Zahnradlebensdauer am Beispiel Hypoidverzahnung

    Haberer, C., Dietrich, A., Godor, I., Leitner, M., Trausmuth, A. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz Herausforderungen im Maschinenbau und in der Schmierungstechnik. p. 67-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Neue Konzepte der Betriebsfestigkeit - der Einfluss des Gefüges

    Eichlseder, W., 2009, 9.Tagung Gefüge und Bruch. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Research of variable loading cases during thermo-mechanical fatigue (TMF), Investigations and considerations in the lifetime calculation

    Winter, G., Köberl, H., Tan, W. & Eichlseder, W., 2009, Second International Conference on Material and Component Performance under Variable Amplitude Loading. p. 517-526

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Schädigungsäquivalente tribologische Untersuchungen zur Erhöhung der Zuverlässigkeit des Systems Kolbenring/Zylinderlaufbahn

    Schiffer, J., Godor, I., Grün, F., Dibiasi, W., Strobl, V. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 89-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Schädigungstolerante Auslegung von Aluminiumdruckgussteilen unter Berücksichtigung der lokalen Defekte

    Oberwinkler, C., Schönfeld, F., Schmidt, S., Leitner, H. & Eichlseder, W., 2009, 36. Tagung des DVM-Srbeitskreises Betriebsfestigkeit. p. 93-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Simulation in der Betriebsfestigkeit-Erweiterung durch Integration des Fertigungsprozesses

    Eichlseder, W., 2009, Ferdinand Redtenbacher. p. 29-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    The Definition of the Influence of Pore Size on the Fatigue Limit Using Short Crack Growth Experiments

    Oberwinkler, C., Eichlseder, W. & Leitner, H., 2009, In: Journal of ASTM international. p. 54-68

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    The influence of ageing on fatigue and fracture-related material parameters for an aluminum cast alloy

    Leitgeb, A., Gänser, H.-P., Ehart, R., Fröschl, J. & Eichlseder, W., 2009, 12th International Conference on Fracture (ICF12). p. 189-189

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Tragfähigkeitssteigerung von Hypoidverzahnungen

    Haberer, C., Godor, I., Leitner, H., Eichlseder, W. & Dietrich, A., 2009, VDI Fachtagung Getriebe in Fahrzeugen 2009. p. 305-315

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Vergleich der Lebensdauer von Kontaktbeanspruchten Werkstoffen unter Einsatzhärtung und Plasmanitrierung

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Dietrich, A. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz; Herausforderung im Maschinenbau und in der Schmierungstechnik. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Virtuelle Produktentwicklung und Lebensdaueroptimierung am Beispiel Getriebeverzahnung

    Haberer, C., Leitner, M., Gänser, H.-P. & Eichlseder, W., 2009, SIMPEP Kongress für Simulation im Produktentwicklungsprozess. p. 30-47

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2008
  50. Published

    VERFAHREN UND VORRICHTUNG ZUR PRÜFUNG EINES PROBEKÖRPERS UNTER KOMBINIERTER UMLAUFBIEGE- UND TORSIONSBEANSPRUCHUNG

    Froeschl, J. (Inventor) & Eichlseder, W. (Inventor), 25 Jun 2008, IPC No. G01N 3/ 32 A I, Patent No. EP1934576, Priority date 11 Oct 2006, Priority No. WO2006EP09819

    Research output: Patent

  51. Published

    Analyzing thermo-mechanical simulation parameters of complex welded structures

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008, 25th Danubia-Adria Symposium. p. 75-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    ANALYZING THERMO-MECHANICAL SIMULATION PARAMETERS OF COMPLEX WELDED STRUCTURES

    Fössl, T., Stoschka, M. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Contact

Phone: 1400

Latest Research Output

View more (287)