Thomas Lucyshyn

51 - 100 out of 129Page size: 50

Research output

  1. 2015
  2. Published

    Weld line improvement of short fiber reinforced thermoplastics with a movable flow obstacle

    Janko, M., Spiegl, B., Kaufmann, A., Lucyshyn, T. & Holzer, C., 15 Jun 2015, In: Journal of Applied Polymer Science. 132, 23, p. 1-12 12 p., 42025.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    流動性基材で作製される部品の製造を制御するための音響ノイズ感知

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Müller, F. (Inventor) & Rath, G. (Inventor), 26 Mar 2015, IPC No. B29C 45/ 76 A I, Patent No. JP2015509054, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  4. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Muller, F. (Inventor), 29 Jan 2015, IPC No. B29C 45/ 76 A I, Patent No. US2015028507, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  5. Published

    Besondere Aspekte bei der Herstellung mikrostrukturierter Spritzgussteile

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, Schriftenreihe Kunststofftechnik Leoben: 24. Leobener Kunststoff-Kolloquium. Leoben, Vol. 05. p. 198-207 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Research in manufacturing of micro-structured injection molded polymer parts

    Lucyshyn, T., Struklec, T., Burgsteiner, M., Graninger, G. & Holzer, C., 2015, AIP Conference Proceedings. Vol. 1695. p. 1-9 9 p. 020014

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    The mold in the focus of research for improved quality of injection molded parts

    Lucyshyn, T., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  8. 2014
  9. Published

    MESSUNG VON AKUSTISCHEM RAUSCHEN ZUR STEUERUNG DER HERSTELLUNG EINES BAUTEILS AUS EINEM FLIESSFÄHIGEN GRUNDMATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor), Müller, F. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Müller, F. (Inventor), 3 Dec 2014, IPC No. G01N 29/ 46 A I, Patent No. EP2807011, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  10. Published

    Acoustic noise sensing for controlling manufacture of a component part made of a flowable base material

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 12 Nov 2014, IPC No. B29C 45/ 76 A I, Patent No. CN104144778, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  11. Published

    ACOUSTIC NOISE SENSING FOR CONTROLLING MANUFACTURE OF A COMPONENT PART MADE OF A FLOWABLE BASE MATERIAL

    Kukla, C. (Inventor), Lucyshyn, T. (Inventor), Rath, G. (Inventor) & Mueller, F. (Inventor), 8 Oct 2014, IPC No. B29C 45/ 76 A I, Patent No. KR20140119154, Priority date 20 Dec 2012, Priority No. WO2012EP76526

    Research output: Patent

  12. Published

    Interface conditions of two-shot molded parts

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Resch, K. & Holzer, C., 15 May 2014, Proceedings of PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. p. 170-174 (AIP conference proceedings; vol. 1593).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Calculation Tool for the Estimation of Injection Mold Deformation Based on FEM-Simulations

    Lucyshyn, T., Kisslinger, T., Langecker, G. & Holzer, C., 2014, Proceedings of PPS2014. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Evaluation of the Demoldability of Coated Micro Structures in the Injection Molding Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2014, Proceedings of PPS 30.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Experimental Confirmation of Diffusion Process in Multi-Component Injection Molding

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G., Holzer, C. & Resch, K., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of the process parameters on the replication of microstructured freeform surfaces

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C. & Holzer, C., 2014, AIP Conference Proceedings: PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. Nuremberg, Germany, Vol. 1593. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Investigation of the Influence of Different Coatings on the Filling Behavior and Replication Quality of Microstructures in Injection Molding

    Burgsteiner, M., Müller, F., Lucyshyn, T., Kukla, C., Holzer, C., Gruber, D. P., Macher, J. & Pacher, G., 2014, Proceedings of PPS 30. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Spritzgießtechnologie

    Lucyshyn, T., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    Voraussetzungen für die hocheffiziente Kunststoffverarbeitung mittels Spritzgusses

    Lucyshyn, T., Janko, M., Struklec, T. & Holzer, C., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. p. 87-98

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Wireless in-mold melt front detection for injection molding: A long-term evaluation

    Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, In: Journal of Applied Polymer Science. 131, p. 5628-5638

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Wireless Melt Front Detection for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T., Burgsteiner, M. & Holzer, C., 2014, ICIT & MPT 2014 Conference Proceedings . p. 153-159

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. 2013
  23. Published

    Acoustic sensing in plastics moulding process

    Rath, G. (Inventor), Kukla, C. (Inventor), Lucyshyn, T. (Inventor) & Müller, F. (Inventor), 24 Jul 2013, IPC No. B29C 45/ 76 A I, Patent No. GB2498586, Priority date 23 Jan 2012, Priority No. GB20120001067

    Research output: Patent

  24. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    ACTIVATION PRESSURE INVESTIGATION FOR A PURELY MECHANICAL WIRELESS IN-MOLD SENSOR

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Application and Development of Simulation Software in Polymer Processing

    Lucyshyn, T., Müller, F., Schuschnigg, S., Holzer, C., Perko, L., Fasching, M. & Friesenbichler, W., 2013, In: Berg- und hüttenmännische Monatshefte : BHM. 158, p. 200-205

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Capabilities of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Holzer, C., Lucyshyn, T., Balika, W. & Moderegger, S., 2013, Proceedings of the Asia-Australasia Conference of PPS 2013. p. 051-051

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Compact Recreational Rebreather With Innovative Gas Sensing Concept and Low Work of Breathing Design

    Sieber, A., Schuster, A., Reif, S., Kessler, M., Lucyshyn, T., Buzzacott, P. & Enoksson, P., 2013, In: Marine Technology Society journal. 47, 6, p. 27-41

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Design of a Demolding Force Measurement Tool for Injection Molding

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    DESIGN OF A DEMOLDING FORCE MEASUREMENT TOOL FOR INJECTION MOLDING

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Moderegger, S. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Entformungskraftmessung an mikrostrukturierten Bauteilen

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 90-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Grenzflächenphänomene im Mehrkomponenten-Spritzguss

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013, 22. Leobener Kunststoff-Kolloquium. p. 58-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    High-End Spritzgießsimulation

    Lucyshyn, T., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Hör auf dein Werkzeug

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, In: Kunststoffe. p. 31-33

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    IMPACT OF INJECTION MOLDING PARAMETERS ON THE FIBERLENGTH DISTRIBUTION AND THE MECHANICAL PROPERTIES OF A SHORT CARBON FIBER REINFORCED POLYPHENYLENE SULFIDE

    Janko, M., Lucyshyn, T., Schlögl, S., Raimann, P., Lenko, D., Meisel, T. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013, Proceedings of the Polymer Processing Society 29th Annual Meeting ~ PPS-29. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    INTERACTION BETWEEN INJECTION MOLDING PARAMETERS, FIBER ORIENTATION AND WARPAGE IN CARBON FIBER REINFORCED PPS VALVE PLATES

    Lucyshyn, T., Janko, M., Schmid, M. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    INTERFACE CONDITIONS OF TWO-SHOT MOLDED PARTS

    Kisslinger, T., Bruckmoser, K., Lucyshyn, T., Langecker, G. & Holzer, C., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Performance Evaluation of Purely Mechanical Wireless In-Mould Sensor for Injection Moulding

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2013, World Academy of Science Engineering and Technology. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

    Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, In: Journal of Applied Polymer Science. 127, p. 4744-4749

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Resonant Acoustic Sensor System for the Wireless Monitoring of Injection Moulding

    Müller, F., O'Leary, P., Rath, G., Kukla, C., Harker, M., Lucyshyn, T. & Holzer, C., 2013, Proceedings of the 2nd International Conference on Sensor Networks. p. 153-161

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. 2012
  44. Published

    A Physical Model for a Quality Control Concept in Injection Molding

    Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 124, p. 4926-4934

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Demolding Force Measurements of Coated Micro-Structured Surfaces in a Hot Embossing Process

    Struklec, T., Burgsteiner, M., Lucyshyn, T., Balika, W., Pöschl, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Determination of the Transition Temperature at Different Cooling Rates and Its Influence on Prediction of Shrinkage and Warpage in Injection Molding Simulation

    Lucyshyn, T., Knapp, G., Kipperer, M. & Holzer, C., 2012, In: Journal of Applied Polymer Science. 123, p. 1162-1168

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    EXINMOLD: a Design Support Software for Injection Mold Makers

    Holzer, C., Kisslinger, T., Hirner, M., Lucyshyn, T. & Langecker, G., 2012,

    Program & Abstracts of PPS 2011

    .     p. 134-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Influence of masterbatches on the bond strength of two-shot molded parts

    Kisslinger, T., Lucyshyn, T., Langecker, G. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Replication of Microstructured Freeform Surface Parts in Injection Molding

    Burgsteiner, M., Müller, F., Wolfberger, A., Lucyshyn, T., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. xxx-xxx

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Runner balancing in multi-cavity injection molds by time controlled valve gates

    Lucyshyn, T., Müller, F., Doppelmayer, N., Rath, G., Kukla, C. & Holzer, C., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    Wireless In-Mold Sensor for Injection Molding: A new Approach

    Müller, F., Kukla, C., Lucyshyn, T. & Holzer, C., 2012, Proceedings of the Polymer Processing Society 28th Annual Meeting ~ PPS-28. p. XXX-XXX

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. 2011
  54. Published

    System zum Gestalten eines Formteils

    Langecker, G. (Inventor), Lucyshyn, T. (Inventor) & Fischer, K. (Inventor), 27 Jul 2011, Patent No. 10196048

    Research output: Patent

  55. Published

    System zum Gestalten eines Formteils

    Langecker, G. (Inventor), Lucyshyn, T. (Inventor) & Fischer, K. (Inventor), 30 Jun 2011, Patent No. 102009055314

    Research output: Patent

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 3510

Latest Research Output

View more (129)