Stefan Pogatscher

1 - 50 out of 187Page size: 50

Research output

  1. 2025
  2. Published

    Mechanisms determining bendability in Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P. J., Samberger, S., Coradini, D. S. R., Falkinger, G., Strobel, K. & Pogatscher, S., 1 Apr 2025, In: Acta Materialia. 287, 120810.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Unravelling nanometallurgy with in situ transmission electron microscopy: A case-study with copper nanowires

    Coradini, D. S. R., Tunes, M. A., Quick, C. R., Willenshofer, P., Kremmer, T., Luidold, S., Uggowitzer, P. & Pogatscher, S., Dec 2024, In: Nano today. 59.2024, December, 10 p., 102485.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Impact of Surface Microstructure and Properties of Aluminum Electrodes on the Plating/Stripping Behavior of Aluminum-Based Batteries Using Imidazolium-Based Electrolyte

    Razaz, G., Weißensteiner, I., Örtegren, J., Trink, B., Pogatscher, S. & Arshadi Rastabi, S., 16 Nov 2024, In: ACS Applied Materials & Interfaces. 16.2024, 47, p. 64389-65740 52 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Dispersoid evolution in Al–Zn–Mg alloys by combined addition of Hf and Zr: A mechanistic approach

    Wessely, V., Töpfer, U., Basu, I., Schäublin, R. E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 6 Oct 2024, In: Materials and Design. 247.2024, November, 17 p., 113366.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Overview on aluminium alloys as sinks for end-of-life vehicle scrap

    Pogatscher, S. & Samberger, S., 1 Oct 2024, In: IOP Conference Series: Materials Science and Engineering. 2024, 1315, 15 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The Effect of Homogenization and Hot Deformation on the Recrystallization Behavior in Aluminum Alloy AA8079

    Santora, E., Pachnek, F., Falkinger, G., Pogatscher, S. & Hirsch, J., 23 Sept 2024, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 55.2024, 12, p. 4914-4927 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Unraveling the potential of Cu addition and cluster hardening in Al-Mg-Si alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Tunes, M. A., Schmid, F., Stemper, L. & Pogatscher, S., 24 Jul 2024, In: Materialia. 36.2024, August, 22 p., 102188.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

    Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process

    Schimbäck, D., Kaserer, L., Mair, P., Mohebbi, M. S., Staron, P., Maier-Kiener, V., Letofsky-Papst, I., Kremmer, T., Palm, F., Montes, I., Höppel, H. W., Leichtfried, G. J. & Pogatscher, S., Jul 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 905.2024, July, 10 p., 146102.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Limitations of Hydrogen Detection After 150 Years of Research on Hydrogen Embrittlement

    Tunes, M. A., Uggowitzer, P., Dumitraschkewitz, P., Willenshofer, P., Samberger, S., da Silva, F., Schön, C. G., Kremmer, T., Antrekowitsch, H., Djukic, M. & Pogatscher, S., 25 Jun 2024, (E-pub ahead of print) In: Advanced Engineering Materials. 26.2024, 19, 18 p., 2400776.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

    Samberger, S., Kremmer, T., Stemper, L., Tourey, S., Uggowitzer, P. & Pogatscher, S., 25 Apr 2024, In: Advanced engineering materials. 26.2024, 19, 7 p., 2400576.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    New strategies to improve Recycling and reduce CO2-emission of Aluminum production and processing

    Samberger, S., v. Czarnowski, P., Pogatscher, S. & Hirsch, J., 16 Mar 2024, In: Keikinzoku-yōsetsu = Journal of light metal welding. 62.2024, 3, p. 119-132 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Modeling the concurrent growth of inter- and intragranular Si precipitates during slow cooling of the alloy AA6016

    Falkinger, G., Kahlenberg, R., Theissing, M., Mitsche, S., Thum, A. & Pogatscher, S., 22 Feb 2024, In: European journal of materials. 4.2024, 1, 23 p., 2316914.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of Solidification Rate and Impurity Content on 5/7-Crossover Alloys

    Samberger, S., Stemper, L., Uggowitzer, P., Tosone, R. & Pogatscher, S., 3 Feb 2024, The Minerals, Metals & Materials Series. Wagstaff, S. (ed.). Vol. 2024. p. 226-233 8 p. (Light Metals 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Investigating the Potential of Secondary Aluminum Cast Alloys Used as Wrought Alloys

    Krall, P. & Pogatscher, S., 3 Feb 2024, Light Metals 2024. p. 191-195 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. 2023
  19. Published

    Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm

    Krall, P., Weißensteiner, I. & Pogatscher, S., 18 Dec 2023, In: Resources, Conservation and Recycling. 202.2024, January, 11 p., 107370.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Strain-induced clustering in Al alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Schmid, F., Falkinger, G., Strobel, K., Kutleša, P., Tkadletz, M. & Pogatscher, S., 11 Nov 2023, In: Materialia. 32.2023, December, 7 p., 101964.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobel, K., Hofer-Roblyek, A. & Pogatscher, S., 15 Sept 2023, In: Acta Materialia. 257.2023, 15 September, 27 p., 119160.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3

    Prada Ramirez, O. M., Kremmer, T., Marin, J. H., da Silva, B. P., Starykevich, M., Tunes, M., Ferreira, M. G. S., Aoki, I. V., Ando, R. A., Pogatscher, S. & de Melo, H. G., 15 Aug 2023, In: Corrosion science. 221.2023, 15 August, 21 p., 111330.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    In situ transmission electron microscopy as a toolbox for the emerging science of nanometallurgy

    Santa Rosa Coradini, D., Tunes, M. A., Willenshofer, P., Samberger, S., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. & Pogatscher, S., 16 Jun 2023, In: Lab on a Chip. 23.2023, 14, p. 3186-3193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Effect of Heating/Cooling-rates on the aging behaviour of Al alloys

    Samberger, S., Stemper, L., Schmid, F. & Pogatscher, S., 11 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Industry-oriented sample preparation with an in- ductively heated laboratory continuous casting plant for aluminum alloys

    Weidinger, A., Samberger, S., Schmid, F., Stemper, L. & Pogatscher, S., 11 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Corrigendum to “Stabilization of Al3Zr allotropes in dilute aluminum alloys via the addition of ternary elements” [Materialia 21 (2022) 101321]

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., Jun 2023, In: Materialia. 29.2023, June, 1 p., 101733.

    Research output: Contribution to journal › Comment/debate › peer-review

  29. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    From high-entropy alloys to high-entropy ceramics: The radiation-resistant highly concentrated refractory carbide (CrNbTaTiW)C

    Tunes, M., Fritze, S., Osinger, B., Willenshofer, P., Alvarado, A. M., Martinez, E., Menon, A. S., Ström, P., Greaves, G., Lewin, E., Jansson, U., Pogatscher, S., Saleh, T. A., Vishnyakov, V. M. & El-Atwani, O., 21 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 15 p., 118856.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

    Honaramooz, M., Morak, R., Pogatscher, S., Popovski, G., Kremmer, T., Meisel, T., Österreicher, J. A., Arnoldt, A. & Paris, O., 31 Jan 2023, In: Materials. 16.2023, 3, 13 p., 1213.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of Hot Band Annealing on Cold-Rolled Microstructure and Recrystallization in AA 6016

    Cantergiani, E., Weißensteiner, I., Grasserbauer, J., Falkinger, G., Pogatscher, S. & Roters, F., Jan 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 1, p. 75-96 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Industry-oriented sample preparation with an inductively heated laboratory continuous casting plant for aluminum alloys

    Weidinger, A., Samberger, S., Schmid, F., Stemper, L. & Pogatscher, S., 2023, Proceedings - European Metallurgical Conference, EMC 2023. p. 435-445 11 p. (Proceedings - European Metallurgical Conference, EMC 2023; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Influence of cooling rates on new alloys from recycled mixed automotive scraps

    Krall, P. & Pogatscher, S., 2023.

    Research output: Contribution to conference › Paper › peer-review

  35. 2022
  36. Published

    Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale

    Papenberg, N. P., Hatzenbichler, T., Grabner, F., Uggowitzer, P. & Pogatscher, S., 12 Dec 2022, In: SN applied sciences . 5.2023, 1, 11 p., 14.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy

    Papenberg, N. P., Arnoldt, A., Trink, B., Uggowitzer, P. & Pogatscher, S., 1 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2022, 857, 22 p., 144079.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Accelerated radiation tolerance testing of Ti-based MAX phases

    Tunes, M., Drewry, S. M., Arregui-Mena, J. D., Picak, S., Greaves, G., Cattini, L., Pogatscher, S., Valdez, J. A., Fensin, S., El-Atwani, O., Donnelly, S. E., Saleh, T. A. & Edmondson, P. D., 28 Oct 2022, In: Materials Today Energy. 30.2022, December, 14 p., 101186.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu

    Dumitraschkewitz, P., Tunes, M., Quick, C. R., Santa Rosa Coradini, D., Kremmer, T., Ramasamy, P., Uggowitzer, P. & Pogatscher, S., 15 Oct 2022, In: Acta Materialia. 239.2022, 15 October, 9 p., 118225.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Ce post-treatment for increased corrosion resistance of AA2024-T3 anodized in tartaric-sulfuric acid

    Prada Ramirez, O. M., Tunes, M. A., Mennucci, M. M., Starykevich, M., Neves, C., Ferreira, M. G. S., Pogatscher, S. & De Melo, H. G., 1 Aug 2022, In: Corrosion science. 204.2022, 1 August, p. 110371 17 p., 110371.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Precipitation in lean Mg–Zn–Ca alloys

    Schäublin, R. E., Becker, M., Cihova, M., Gerstl, S. S. A., Deiana, D., Hébert, C., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 30 Jul 2022, (E-pub ahead of print) In: Acta Materialia. 239.2022, 15 October, 19 p., 118223.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobl, K. & Pogatscher, S., 1 Jul 2022, In: Scripta Materialia. 215, 6 p., 114701.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

    Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

    Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., De Geuser, F., Deschamps, A., Hutchinson, C., Liu, C., Li, Z., Prangnell, P., Robson, J., Shanthraj, P., Vakili, S. & Sinclair, C. & 2 others, Bourgeois, L. & Pogatscher, S., 7 Apr 2022, (E-pub ahead of print) In: Progress in materials science. 128.2022, July, 150 p., 100947.

    Research output: Contribution to journal › Review article › peer-review

  46. Published

    On the potential of aluminum crossover alloys

    Stemper, L., Tunes, M. A., Tosone, R., Uggowitzer, P. & Pogatscher, S., Feb 2022, In: Progress in materials science. 124.2022, February, 14 p., 100873.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elements

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., 25 Jan 2022, (E-pub ahead of print) In: Materialia. 21.2022, March, 11 p., 101321.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing

    Schimbäck, D., Mair, P., Bärtl, M., Palm, F., Leichtfried, G., Mayer, S., Uggowitzer, P. J. & Pogatscher, S., 15 Jan 2022, In: Scripta Materialia. 207.2022, 15 January, 6 p., 114277.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Accepted/In press

    Fast differential scanning calorimetry to mimic additive manufacturing processing: specific heat capacity analysis of aluminium alloys

    Quick, C. R., Dumitraschkewitz, P., Schawe, J. E. K. & Pogatscher, S., 2022, (Accepted/In press) In: Journal of Thermal Analysis and Calorimetry. 148.2023, February, p. 651-662 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2021
  51. Published

    Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy

    Tunes, M. A., Greaves, G., Rack, P. D., Boldman, W. L., Schön, C. G., Pogatscher, S., Maloy, S. A., Zhang, Y. & El-Atwani, O., 3 Dec 2021, In: Nanoscale. 13.2021, 48, p. 20437-20450 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Lean Wrought Magnesium Alloys

    Papenberg, N. P., Gneiger, S., Uggowitzer, P. J. & Pogatscher, S., 31 Jul 2021, In: Materials. 14.2021, 15, 30 p., 4282.

    Research output: Contribution to journal › Review article › peer-review

  53. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Uggowitzer, P. & Pogatscher, S., 15 Jun 2021, In: Materials. 14.2021, 12, 3312.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Enhanced aging kinetics in Al-Mg-Si alloys by up-quenching

    Schmid, F., Dumitraschkewitz, P., Kremmer, T., Uggowitzer, P., Tosone, R. & Pogatscher, S., 7 Jun 2021, In: Communications materials. p. 12 58.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Kremmer, T., Uggowitzer, P. & Pogatscher, S., 2 Jun 2021, In: Materials. 14.2021, 12, 3204.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 5228

Postal address

Austria

Latest Research Output

View more (187)