Stefan Pogatscher

1 - 100 out of 187Page size: 100

Research output

  1. 2025
  2. Published

    Mechanisms determining bendability in Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P. J., Samberger, S., Coradini, D. S. R., Falkinger, G., Strobel, K. & Pogatscher, S., 1 Apr 2025, In: Acta Materialia. 287, 120810.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Unravelling nanometallurgy with in situ transmission electron microscopy: A case-study with copper nanowires

    Coradini, D. S. R., Tunes, M. A., Quick, C. R., Willenshofer, P., Kremmer, T., Luidold, S., Uggowitzer, P. & Pogatscher, S., Dec 2024, In: Nano today. 59.2024, December, 10 p., 102485.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Impact of Surface Microstructure and Properties of Aluminum Electrodes on the Plating/Stripping Behavior of Aluminum-Based Batteries Using Imidazolium-Based Electrolyte

    Razaz, G., Weißensteiner, I., Örtegren, J., Trink, B., Pogatscher, S. & Arshadi Rastabi, S., 16 Nov 2024, In: ACS Applied Materials & Interfaces. 16.2024, 47, p. 64389-65740 52 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Dispersoid evolution in Al–Zn–Mg alloys by combined addition of Hf and Zr: A mechanistic approach

    Wessely, V., Töpfer, U., Basu, I., Schäublin, R. E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 6 Oct 2024, In: Materials and Design. 247.2024, November, 17 p., 113366.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Overview on aluminium alloys as sinks for end-of-life vehicle scrap

    Pogatscher, S. & Samberger, S., 1 Oct 2024, In: IOP Conference Series: Materials Science and Engineering. 2024, 1315, 15 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    The Effect of Homogenization and Hot Deformation on the Recrystallization Behavior in Aluminum Alloy AA8079

    Santora, E., Pachnek, F., Falkinger, G., Pogatscher, S. & Hirsch, J., 23 Sept 2024, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 55.2024, 12, p. 4914-4927 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Unraveling the potential of Cu addition and cluster hardening in Al-Mg-Si alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Tunes, M. A., Schmid, F., Stemper, L. & Pogatscher, S., 24 Jul 2024, In: Materialia. 36.2024, August, 22 p., 102188.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

    Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process

    Schimbäck, D., Kaserer, L., Mair, P., Mohebbi, M. S., Staron, P., Maier-Kiener, V., Letofsky-Papst, I., Kremmer, T., Palm, F., Montes, I., Höppel, H. W., Leichtfried, G. J. & Pogatscher, S., Jul 2024, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 905.2024, July, 10 p., 146102.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Limitations of Hydrogen Detection After 150 Years of Research on Hydrogen Embrittlement

    Tunes, M. A., Uggowitzer, P., Dumitraschkewitz, P., Willenshofer, P., Samberger, S., da Silva, F., Schön, C. G., Kremmer, T., Antrekowitsch, H., Djukic, M. & Pogatscher, S., 25 Jun 2024, (E-pub ahead of print) In: Advanced Engineering Materials. 26.2024, 19, 18 p., 2400776.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

    Samberger, S., Kremmer, T., Stemper, L., Tourey, S., Uggowitzer, P. & Pogatscher, S., 25 Apr 2024, In: Advanced engineering materials. 26.2024, 19, 7 p., 2400576.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    New strategies to improve Recycling and reduce CO2-emission of Aluminum production and processing

    Samberger, S., v. Czarnowski, P., Pogatscher, S. & Hirsch, J., 16 Mar 2024, In: Keikinzoku-yōsetsu = Journal of light metal welding. 62.2024, 3, p. 119-132 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Modeling the concurrent growth of inter- and intragranular Si precipitates during slow cooling of the alloy AA6016

    Falkinger, G., Kahlenberg, R., Theissing, M., Mitsche, S., Thum, A. & Pogatscher, S., 22 Feb 2024, In: European journal of materials. 4.2024, 1, 23 p., 2316914.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Influence of Solidification Rate and Impurity Content on 5/7-Crossover Alloys

    Samberger, S., Stemper, L., Uggowitzer, P., Tosone, R. & Pogatscher, S., 3 Feb 2024, The Minerals, Metals & Materials Series. Wagstaff, S. (ed.). Vol. 2024. p. 226-233 8 p. (Light Metals 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  17. Published

    Investigating the Potential of Secondary Aluminum Cast Alloys Used as Wrought Alloys

    Krall, P. & Pogatscher, S., 3 Feb 2024, Light Metals 2024. p. 191-195 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. 2023
  19. Published

    Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm

    Krall, P., Weißensteiner, I. & Pogatscher, S., 18 Dec 2023, In: Resources, Conservation and Recycling. 202.2024, January, 11 p., 107370.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Strain-induced clustering in Al alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Schmid, F., Falkinger, G., Strobel, K., Kutleša, P., Tkadletz, M. & Pogatscher, S., 11 Nov 2023, In: Materialia. 32.2023, December, 7 p., 101964.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobel, K., Hofer-Roblyek, A. & Pogatscher, S., 15 Sept 2023, In: Acta Materialia. 257.2023, 15 September, 27 p., 119160.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Ce nanoparticles and sol-gel hybrid organic-inorganic coatings maximize corrosion protection in the anodized AA2024-T3

    Prada Ramirez, O. M., Kremmer, T., Marin, J. H., da Silva, B. P., Starykevich, M., Tunes, M., Ferreira, M. G. S., Aoki, I. V., Ando, R. A., Pogatscher, S. & de Melo, H. G., 15 Aug 2023, In: Corrosion science. 221.2023, 15 August, 21 p., 111330.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    In situ transmission electron microscopy as a toolbox for the emerging science of nanometallurgy

    Santa Rosa Coradini, D., Tunes, M. A., Willenshofer, P., Samberger, S., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. & Pogatscher, S., 16 Jun 2023, In: Lab on a Chip. 23.2023, 14, p. 3186-3193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Effect of Heating/Cooling-rates on the aging behaviour of Al alloys

    Samberger, S., Stemper, L., Schmid, F. & Pogatscher, S., 11 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Industry-oriented sample preparation with an in- ductively heated laboratory continuous casting plant for aluminum alloys

    Weidinger, A., Samberger, S., Schmid, F., Stemper, L. & Pogatscher, S., 11 Jun 2023.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Corrigendum to “Stabilization of Al3Zr allotropes in dilute aluminum alloys via the addition of ternary elements” [Materialia 21 (2022) 101321]

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., Jun 2023, In: Materialia. 29.2023, June, 1 p., 101733.

    Research output: Contribution to journal › Comment/debate › peer-review

  29. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  30. E-pub ahead of print

    From high-entropy alloys to high-entropy ceramics: The radiation-resistant highly concentrated refractory carbide (CrNbTaTiW)C

    Tunes, M., Fritze, S., Osinger, B., Willenshofer, P., Alvarado, A. M., Martinez, E., Menon, A. S., Ström, P., Greaves, G., Lewin, E., Jansson, U., Pogatscher, S., Saleh, T. A., Vishnyakov, V. M. & El-Atwani, O., 21 Mar 2023, (E-pub ahead of print) In: Acta Materialia. 250.2023, 15 May, 15 p., 118856.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Characterization of Zr-Containing Dispersoids in Al–Zn–Mg–Cu Alloys by Small-Angle Scattering

    Honaramooz, M., Morak, R., Pogatscher, S., Popovski, G., Kremmer, T., Meisel, T., Österreicher, J. A., Arnoldt, A. & Paris, O., 31 Jan 2023, In: Materials. 16.2023, 3, 13 p., 1213.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of Hot Band Annealing on Cold-Rolled Microstructure and Recrystallization in AA 6016

    Cantergiani, E., Weißensteiner, I., Grasserbauer, J., Falkinger, G., Pogatscher, S. & Roters, F., Jan 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 1, p. 75-96 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Industry-oriented sample preparation with an inductively heated laboratory continuous casting plant for aluminum alloys

    Weidinger, A., Samberger, S., Schmid, F., Stemper, L. & Pogatscher, S., 2023, Proceedings - European Metallurgical Conference, EMC 2023. p. 435-445 11 p. (Proceedings - European Metallurgical Conference, EMC 2023; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Influence of cooling rates on new alloys from recycled mixed automotive scraps

    Krall, P. & Pogatscher, S., 2023.

    Research output: Contribution to conference › Paper › peer-review

  35. 2022
  36. Published

    Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale

    Papenberg, N. P., Hatzenbichler, T., Grabner, F., Uggowitzer, P. & Pogatscher, S., 12 Dec 2022, In: SN applied sciences . 5.2023, 1, 11 p., 14.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    An improved process scan strategy to obtain high-performance fatigue properties for Scalmalloy®

    Schimbäck, D., Mair, P., Kaserer, L., Perfler, L., Palm, F., Leichtfried, G. & Pogatscher, S., 22 Nov 2022, (E-pub ahead of print) In: Materials and Design. 224.2022, December, 11 p., 111410.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy

    Papenberg, N. P., Arnoldt, A., Trink, B., Uggowitzer, P. & Pogatscher, S., 1 Nov 2022, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2022, 857, 22 p., 144079.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Accelerated radiation tolerance testing of Ti-based MAX phases

    Tunes, M., Drewry, S. M., Arregui-Mena, J. D., Picak, S., Greaves, G., Cattini, L., Pogatscher, S., Valdez, J. A., Fensin, S., El-Atwani, O., Donnelly, S. E., Saleh, T. A. & Edmondson, P. D., 28 Oct 2022, In: Materials Today Energy. 30.2022, December, 14 p., 101186.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu

    Dumitraschkewitz, P., Tunes, M., Quick, C. R., Santa Rosa Coradini, D., Kremmer, T., Ramasamy, P., Uggowitzer, P. & Pogatscher, S., 15 Oct 2022, In: Acta Materialia. 239.2022, 15 October, 9 p., 118225.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Ce post-treatment for increased corrosion resistance of AA2024-T3 anodized in tartaric-sulfuric acid

    Prada Ramirez, O. M., Tunes, M. A., Mennucci, M. M., Starykevich, M., Neves, C., Ferreira, M. G. S., Pogatscher, S. & De Melo, H. G., 1 Aug 2022, In: Corrosion science. 204.2022, 1 August, p. 110371 17 p., 110371.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Precipitation in lean Mg–Zn–Ca alloys

    Schäublin, R. E., Becker, M., Cihova, M., Gerstl, S. S. A., Deiana, D., Hébert, C., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 30 Jul 2022, (E-pub ahead of print) In: Acta Materialia. 239.2022, 15 October, 19 p., 118223.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobl, K. & Pogatscher, S., 1 Jul 2022, In: Scripta Materialia. 215, 6 p., 114701.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

    Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

    Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., De Geuser, F., Deschamps, A., Hutchinson, C., Liu, C., Li, Z., Prangnell, P., Robson, J., Shanthraj, P., Vakili, S. & Sinclair, C. & 2 others, Bourgeois, L. & Pogatscher, S., 7 Apr 2022, (E-pub ahead of print) In: Progress in materials science. 128.2022, July, 150 p., 100947.

    Research output: Contribution to journal › Review article › peer-review

  46. Published

    On the potential of aluminum crossover alloys

    Stemper, L., Tunes, M. A., Tosone, R., Uggowitzer, P. & Pogatscher, S., Feb 2022, In: Progress in materials science. 124.2022, February, 14 p., 100873.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elements

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., 25 Jan 2022, (E-pub ahead of print) In: Materialia. 21.2022, March, 11 p., 101321.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing

    Schimbäck, D., Mair, P., Bärtl, M., Palm, F., Leichtfried, G., Mayer, S., Uggowitzer, P. J. & Pogatscher, S., 15 Jan 2022, In: Scripta Materialia. 207.2022, 15 January, 6 p., 114277.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Accepted/In press

    Fast differential scanning calorimetry to mimic additive manufacturing processing: specific heat capacity analysis of aluminium alloys

    Quick, C. R., Dumitraschkewitz, P., Schawe, J. E. K. & Pogatscher, S., 2022, (Accepted/In press) In: Journal of Thermal Analysis and Calorimetry. 148.2023, February, p. 651-662 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. 2021
  51. Published

    Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy

    Tunes, M. A., Greaves, G., Rack, P. D., Boldman, W. L., Schön, C. G., Pogatscher, S., Maloy, S. A., Zhang, Y. & El-Atwani, O., 3 Dec 2021, In: Nanoscale. 13.2021, 48, p. 20437-20450 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Lean Wrought Magnesium Alloys

    Papenberg, N. P., Gneiger, S., Uggowitzer, P. J. & Pogatscher, S., 31 Jul 2021, In: Materials. 14.2021, 15, 30 p., 4282.

    Research output: Contribution to journal › Review article › peer-review

  53. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Uggowitzer, P. & Pogatscher, S., 15 Jun 2021, In: Materials. 14.2021, 12, 3312.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Enhanced aging kinetics in Al-Mg-Si alloys by up-quenching

    Schmid, F., Dumitraschkewitz, P., Kremmer, T., Uggowitzer, P., Tosone, R. & Pogatscher, S., 7 Jun 2021, In: Communications materials. p. 12 58.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Kremmer, T., Uggowitzer, P. & Pogatscher, S., 2 Jun 2021, In: Materials. 14.2021, 12, 3204.

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    MUL 4.0 – Digitalisierung der Wertschöpfungskette vom Rohmaterial bis hin zum Recycling

    Woschank, M., Ralph, B. J., Kaiblinger, A., Miklautsch, P., Pacher, C., Sorger, M., Zsifkovits, H., Stockinger, M., Pogatscher, S., Antretter, T. & Antrekowitsch, H., 2 Jun 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 166, 6, p. 309-313

    Research output: Contribution to journal › Article › Research › peer-review

  57. Published

    Irradiation stability and induced ferromagnetism in a nanocrystalline CoCrCuFeNi highly-concentrated alloy

    Tunes, M. A., El-Atwani, O., Greaves, G., Boldman, W., Rack, P., Schön, C., Pogatscher, S., Maloy, S. & Zhang, Y., 13 Apr 2021

    Research output: Other contribution › Research

  58. E-pub ahead of print

    Two step-ageing of 7xxx series alloys with an intermediate warm-forming step

    Österreicher, J. A., Grabner, F., Tunes, M. A., Coradini, D. S. R., Pogatscher, S. & Schlögl, C. M., 21 Mar 2021, (E-pub ahead of print) In: Journal of Materials Research and Technology. 12.2021, May-June, p. 1508-1515 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Giant hardening response in AlMgZn(Cu) alloys

    Stemper, L., Tunes, M. A., Dumitraschkewitz, P., Mendez Martin, F., Tosone, R., Marchand, D., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 1 Mar 2021, In: Acta Materialia. 206.2021, March, 19 p., 116617.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Deviating from the pure MAX phase concept: Radiation-tolerant nanostructured dual-phase Cr2AlC

    Tunes, M. A., Imtyazuddin, M., Kainz, C., Pogatscher, S. & Vishnyakov, V. M., Mar 2021, In: Science Advances. 7, 13, p. 1-12 eabf6771.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Synergistic alloy design concept for new high-strength Al–Mg–Si thick plate alloys

    Schmid, F., Weißensteiner, I., Tunes, M. A., Kremmer, T., Ebner, T., Morak, R., Uggowitzer, P. J. & Pogatscher, S., Mar 2021, In: Materialia. 15, 13 p., 100997.

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    A Fast and Implantation-Free Sample Production Method for Large Scale Electron-Transparent Metallic Samples Destined for MEMS-Based In Situ S/TEM Experiments

    Tunes, M. A., Quick, C., Stemper, L., Santa Rosa Coradini, D., Grasserbauer, J., Dumitraschkewitz, P., Kremmer, T. & Pogatscher, S., 26 Feb 2021, In: Materials. 14.2021, 5, p. 1-9 9 p., 1085.

    Research output: Contribution to journal › Article › Research › peer-review

  63. 2020
  64. Published

    Tartaric-sulphuric acid anodized clad AA2024-T3 post-treated in Ce-containing solutions at different temperatures: Corrosion behaviour and Ce ions distribution

    Ramirez, O. M. P., Queiroz, F. M., Tunes, M. A., Antunes, R. A., Rodrigues, C. L., Lanzutti, A., Pogatscher, S., Olivier, M.-G. & Melo, H. G. D., 30 Dec 2020, In: Applied surface science. 534, p. 147634 1 p., 147634.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Prototypic Lightweight Alloy Design for Stellar-Radiation Environments

    Tunes, M. A., Stemper, L., Greaves, G., Uggowitzer, P. J. & Pogatscher, S., 18 Nov 2020, In: Advanced science. 7, 22, 2002397.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Degradation of Cu nanowires in a low-reactive plasma environment

    Santa Rosa Coradini, D., Tunes, M. A., Kremmer, T. M., Schön, C. G., Uggowitzer, P. J. & Pogatscher, S., 5 Nov 2020, In: npj Materials degradation. 4, 8 p., 33.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Radiation damage suppression in AISI-316 steel nanoparticles: Implications for the design of future nuclear materials

    Aradi, E., Tunes, M. A., Lewis-Fell, J., Greaves, G., Antrekowitsch, H., Pogatscher, S., Donnelly, S. E. & Hinks, J. A., 23 Oct 2020, In: ACS Applied Nano Materials. 3, 10, p. 9652-9662 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Mechanism of low temperature deformation in aluminium alloys

    Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 p., 139935.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Age-hardening response of AlMgZn alloys with Cu and Ag additions

    Stemper, L., Tunes, M. A., Oberhauser, P., Uggowitzer, P. J. & Pogatscher, S., 15 Aug 2020, In: Acta Materialia. 195.2020, August, p. 541–554 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet

    Österreicher, J. A., Tunes, M. A., Grabner, F., Arnoldt, A., Kremmer, T., Pogatscher, S. & Schlögl, C. M., Aug 2020, In: Materials and Design. 193, p. 108837 1 p., 108837.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Microstructural Change during the Interrupted Quenching of the AlZnMg(Cu) Alloy AA7050

    Kremmer, T., Dumitraschkewitz, P., Pöschmann, D., Ebner, T., Uggowitzer, P., Kolb, G. & Pogatscher, S., 4 Jun 2020, In: Materials. 13, 11, 11 p., 2554.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Room temperature recovery of cryogenically deformed aluminium alloys

    Gruber, B., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Uggowitzer, P. J. & Pogatscher, S., 23 May 2020, In: Materials & design. 193.2020, August, 108819.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Thermodynamics of polymorphism in a bulk metallic glass: Heat capacity measurements by fast differential scanning calorimetry

    Schawe, J. E. K., Pogatscher, S. & Löffler, J. F., Mar 2020, In: Thermochimica Acta. 685, 8 p., 178518.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Mg-alloys for forging applications-A review

    Papenberg, N. P., Gneiger, S., Weißensteiner, I., Uggowitzer, P. J. & Pogatscher, S., 22 Feb 2020, In: Materials. 13.2020, 4, 61 p., 985.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Ageing behaviour of Al-Mg-Si alloys after cryogenic and room temperature deformation

    Gruber, B., Grabner, F., Fragner, W., Schökel, A., Spieckermann, F., Uggowitzer, P. & Pogatscher, S., 1 Feb 2020, In: Materials. 13, 3, 554.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Evolution of microstructure and texture in laboratory- and industrial-scaled production of automotive Al-sheets

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Mitsche, S., Uggowitzer, P. & Pogatscher, S., 19 Jan 2020, In: Materials. 13.2020, 2, 469.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Crossover-Legierungen: Aushärtung und Verformungspotenzial

    Pogatscher, S., Stemper, L., Uggowitzer, P. & Fragner, W., 2020, 11. RANSHOFENER LEICHTMETALLTAGE: Leichtmetalle, Werkstoff- und Prozesstechnologien im Kontext von Dekarbonisierung und Digitalisierung.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. 2019
  79. Published

    Size-dependent diffusion controls natural aging in aluminium alloys

    Dumitraschkewitz, P., Uggowitzer, P. J., Gerstl, S. S. A., Löffler, J. F. & Pogatscher, S., 18 Oct 2019, In: Nature Communications. 10.2019, 1, 6 p., 4746.

    Research output: Contribution to journal › Article › Research › peer-review

  80. E-pub ahead of print

    Thermodynamics of an austenitic stainless steel (AISI-348) under in situ TEM heavy ion irradiation

    Tunes, M. A., Greaves, G., Kremmer, T., Vishnyakov, V. M., Edmondson, P. D., Donnelly, S. E., Pogatscher, S. & Schön, C. G., 27 Aug 2019, (E-pub ahead of print) In: Acta Materialia. 179.2019, 15 October, p. 360-371 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Influence of Zn and Sn on the Precipitation Behavior of New Al–Mg–Si Alloys

    Glöckel, F., Uggowitzer, P. J., Felfer, P., Pogatscher, S. & Höppel, H. W., 10 Aug 2019, In: Materials. 12.2019, 16, 13 p., 2547.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment

    Horky, J., Ghaffar, A., Werbach, K., Mingler, B., Pogatscher, S., Schäublin, R., Setman, D., Uggowitzer, P. J., Löffler, J. F. & Zehetbauer, M. J., 2 Aug 2019, In: Materials. 12.2019, 15, 18 p., 2460.

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Measurement of specific heat capacity via fast scanning calorimetry—Accuracy and loss corrections

    Quick, C. R., Schawe, J. E. K., Uggowitzer, P. J. & Pogatscher, S., 13 Jun 2019, In: Thermochimica Acta. 677.2019, June, p. 12-20 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  84. Published

    Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions

    Stemper, L., Mitas, B., Kremmer, T., Otterbach, S., Uggowitzer, P. J. & Pogatscher, S., 9 Jun 2019, In: Materials & design. 181.2019, 11 p., 107927.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Effect of Thermal Treatments on Sn-Alloyed Al-Mg-Si Alloys

    Schmid, F., Uggowitzer, P., Schäublin, R. E., Werinos, M., Ebner, T. & Pogatscher, S., 3 Jun 2019, In: Materials. 12.2019, 11, 19 p., 1801.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Processing-controlled suppression of Lüders elongation in AlMgMn alloys

    Ebenberger, P., Uggowitzer, P. J., Kirnstötter, S., Gerold, B., Zaefferer, S. & Pogatscher, S., 1 Jun 2019, In: Scripta Materialia. 166.2019, June, p. 64-67 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Effect of Compositional and Processing Variations in New 5182-Type AlMgMn Alloys on Mechanical Properties and Deformation Surface Quality

    Ebenberger, P., Uggowitzer, P., Gerold, B. & Pogatscher, S., 20 May 2019, In: Materials. 12.2019, 10, 21 p., 1645.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Industry-oriented sample preparation of 6xxx and 5xxx aluminum alloys in laboratory scale

    Schmid, F., Stemper, L., Pogatscher, S., Ebner, T. & Leitner, W., 1 Jan 2019, Proceedings of the 10th European Metallurgical Conference, EMC 2019. p. 639-651 13 p. (Proceedings of the 10th European Metallurgical Conference, EMC 2019; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Fortschritte in der Aushärtung von Aluminiumlegierungen

    Pogatscher, S., Uggowitzer, P. & Fragner, W., 2019, In: Dialog : Materialwissenschaft und Werkstofftechnik .

    Research output: Contribution to journal › Article › Research

  90. Published

    Thermodynamic stability of a nanocrystalline highly concentrated solid solution alloy

    Tunes, M. A., Greaves, G., Kremmer, T., Schön, C. G., Pogatscher, S., Rack, P. D., Donnelly, S. E. & Zhang, Y., 2019, Intermetallics: Proceedings. 1 ed. Bad Staffelstein, Vol. 1. p. 200-201 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. 2018
  92. Published

    Clustering in Age-Hardenable Aluminum Alloys

    Dumitraschkewitz, P., Gerstl, S. S. A., Stephenson, L. T., Uggowitzer, P. J. & Pogatscher, S., 1 Oct 2018, In: Advanced engineering materials. 20.2018, 10, 24 p., 1800255.

    Research output: Contribution to journal › Review article › peer-review

  93. Published

    Monotropic polymorphism in a glass-forming metallic alloy

    Pogatscher, S., Leutenegger, D., Schawe, J. E. K., Maris, P., Schäublin, R., Uggowitzer, P. J. & Löffler, J. F., 18 May 2018, In: Journal of Physics Condensed Matter. 30.2018, 23, 10 p., 234002.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition

    Spierings, A. B., Dawson, K., Dumitraschkewitz, P., Pogatscher, S. & Wegener, K., 1 Mar 2018, In: Additive Manufacturing. 20.2018, March, p. 173-181 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. 2017
  96. Published

    Atom probe tomography of early natural aging and pre-aging of AA 6016

    Dumitraschkewitz, P., Rank, G., Uggowitzer, P., Gerstl, S. S. A. & Pogatscher, S., 8 Nov 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  97. Published

    Solute Distribution Analysis of Early Stages of Aging in Al-Mg-Si Alloys via Atom Probe Tomography

    Dumitraschkewitz, P., Rank, G., Sackl, S. C., Gerstl, S. S. A. & Pogatscher, S., 28 Feb 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  98. Published

    Effect of Interrupted Quenching on Al‐Zn‐Mg‐Cu Alloys

    Kolb, G., Antrekowitsch, H., Pöschmann, D., Uggowitzer, P. J. & Pogatscher, S., 2017, Light Metals 2017. p. 385–389

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Influence of Interrupted Quenching on microstructure and properties of 7xxx aluminium alloys

    Kolb, G., Antrekowitsch, H., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2017.

    Research output: Contribution to conference › Abstract › peer-review

  100. 2016
  101. Published

    Hardening of Al-Mg-Si alloys: Effect of trace elements and prolonged natural aging

    Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Uggowitzer, P. & Pogatscher, S., 5 Oct 2016, In: Materials & design. 107.2016, 5 October, p. 257-268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Analysis of initial clustering in Al-Mg-Si alloys via atom probe tomography

    Dumitraschkewitz, P., Pogatscher, S. & Gerstl, S., 27 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. E-pub ahead of print

    Design strategy for controlled natural aging in Al–Mg–Si alloys

    Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 4 Aug 2016, (E-pub ahead of print) In: Acta materialia. 118.2016, 1 October, p. 296-305 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Differential Scanning Calorimetry and Thermodynamic Predictions: A Comparative Study of Al-Zn-Mg-Cu Alloys

    Kolb, G., Scheiber, S., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 3 Aug 2016, In: Metals : open access journal . 6.2016, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Solid-solid phase transitions via melting in metals

    Pogatscher, S., Leutenegger, D., Schawe, J. E. K., Uggowitzer, P. & Löffler, J. F., 22 Apr 2016, In: Nature Communications. 7.2016, 6 p., 11113.

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    A comparative study of CALPHAD and differential scanning calorimetry to optimize 7xxx aluminum alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  107. Published

    Atom probe tomography investigation of early stage clustering of as-quenched Al-Mg-Si alloys

    Pogatscher, S., Dumitraschkewitz, P. & Gerstl, S. S. A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  108. Published

    Atom probe tomography of early stage clustering in Al alloys

    Pogatscher, S., Dumitraschkewitz, P. & Gerstl, S. S. A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  109. Published

    Atom Probe Tomography Study of As-Quenched Al–Mg–Si Alloys 

    Dumitraschkewitz, P., Gerstl, S. S. A., Uggowitzer, P., Löffler, J. F. & Pogatscher, S., 2016, In: Advanced engineering materials. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  110. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

Previous 1 2 Next
View graph of relations

Contact

Phone: 5228

Postal address

Austria

Latest Research Output

View more (187)