Robert Danzer

51 - 100 out of 224Page size: 50

Research output

  1. 2015
  2. Published

    Fracture toughness and strength distribution at room temperature of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Mark, T., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 275, p. 217-226

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Heat Treatment-Induced Improvement of the Thermal Shock Resistance of Si3N4 Tools for Metallurgical Applications

    Harrer, W., Danzer, R. & Berroth, K., 2015, In: Practical metallography = Praktische Metallographie. 52, 4, p. 191-204 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    High temperature mechanical properties of zirconia tapes used for electrolyte supported solid oxide fuel cells

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kübler, J., 2015, In: Journal of power sources. 273, p. 237-243

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Influence of temperature and humidity on the strength of Low Temperature Co-fired Ceramics

    Krautgasser, C., Danzer, R., Supancic, P. & Bermejo, R., 2015, In: Journal of the European Ceramic Society. 35, p. 1823–1830

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Institut für Struktur- und Funktionskeramik

    Danzer, R., 2015, Wo aus Forschung Zukunft wird Festschrift zum Jubiläum "175 Jahre Montanuniversität Leoben". Leoben, M. (ed.). Leoben, Vol. 1, Die Entwicklung der Montanuniversität seit 1990. p. 232-235 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

  7. Published

    On the Development of Experimental Methods for the Determination of Fracture Toughness Parameters of Ceramics

    Danzer, R., Lube, T. & Rasche, S., 2015, Recent Trends in Fracture and Damage Mechanics. Hütter, G. & Zybell, L. (eds.). Heidelberg: Springer, p. 197-214 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  8. Published

    Piezotronically Modified Double Schottky Barriers in ZnO Varistors

    Raidl, N., Supancic, P., Danzer, R. & Hofstätter, M., 2015, In: Advanced materials. 27, p. 2031-2035 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Strength of an Electrolyte Supported Solid Oxide Fuel Cell

    Fleischhauer, F., Bermejo, R., Danzer, R., Mai, A., Graule, T. & Kuebler, J., 2015, In: Journal of power sources. 297, p. 158-167 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Thermography and Complemetary Measurements as Tool to Detect Micro-Irregularities in Electronic Components

    Röhrig, S., Petschenig, I., Bermejo, R., Hofstätter, M., Aldrian, F., Danzer, R. & Supancic, P., 2015, In: Journal of ceramic science and technology. p. 255-260

    Research output: Contribution to journal › Article › Research › peer-review

  11. 2014
  12. Published

    Evaluation of subcritical crack growth in low temperature co-fired ceramics

    Bermejo, R., Supancic, P., Krautgasser, C. & Danzer, R., 10 Jan 2014, Mechanical Properties and Performance of Engineering Ceramics and Composites VIII - A Collection of Papers Presented at the 37th International Conf. on Advanced Ceramics and Composites, ICACC 2013. 2 ed. Vol. 34. p. 161-172 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    A new strength test for ceramic cylinders-The Notched Roller Test

    Strobl, S., Supancic, P., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 2575-2584

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Effect of residuel stresses on the strength of glass-ceramic multilayer composites different microstructures

    Bermejo Moratinos, R., Krautgasser, C., Deluca, M., Strobl, S., Kraleva, I., Petschenig, I., Aldrian, F., Supancic, P. & Danzer, R., 2014, Praktische Metallographie Sonderband. p. 169-174

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  15. Published

    Expertenstudie Zukunftspotentiale von Hochleistungskeramiken

    Danzer, R., 2014

    Research output: Book/Report › Commissioned report › Transfer

  16. Published

    Failure analysis of Electrolyte-Supported Solid Oxide Fuel Cells

    Fleischhauer, F., Tiefenauer, A., Mai, A., Danzer, R., Graule, T. & Kübler, J., 2014, In: Journal of power sources. p. 382-390

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Fractography of biaxial tested Si3N4-specimens

    Harrer, W., Morrell, R. & Danzer, R., 2014, In: Journal of the European Ceramic Society. 34, p. 3283-3289

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Mechanical Characterization of Ceramics: Designing with Brittle Materials

    Bermejo Moratinos, R. & Danzer, R., 2014, Comprehensive Hard Materials. p. 285-298

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  19. Published

    Mechanical Properties and Reliability of Advanced Ceramics

    Lube, T. & Danzer, R., 2014, Advanced Ceramics for Dentristry. p. 173-199

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  20. Published

    Mechanical properties of silicon nitride rolling elements in dependence of size and shape

    Strobl, S., Lube, T., Supancic, P., Stoiser, M., Schöppl, O. & Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 4167-4176

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Micro four-point probe investigation of individual ZnO grain boundaries in avaristor ceramic

    Nevosad, A., Hofstätter, M., Supancic, P., Danzer, R. & Teichert, C., 2014, In: Journal of the European Ceramic Society. 34, p. 1963-1970

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    On the relationship between ceramic strength and tehe requirements for mechanical design

    Danzer, R., 2014, In: Journal of the European Ceramic Society. p. 3435-3460

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Verbesserung der Thermoschockbeständigkeit von Si3N4-Werkzeugen für metallurgische Anwendungen durch eine Wärmebehandlung

    Danzer, R., Harrer, W. & Berroth, K., 2014, Praktische Metallographie Sonderband. p. 175-180

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  24. 2013
  25. Published

    Einfluss der Messunsicherheit auf die Ermittlung der Weibull-Verteilung

    Danzer, R., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Handbook of Advanced Ceramics - Materials, Applications, Processing, and Properties: 2nd Edition; Review

    Danzer, R. (Co-editor), 2013, Amsterdam: Elsevier.

    Research output: Book/Report › Book › Research

  27. Published

    Mechanical Properties of Ceramics

    Danzer, R., Lube, T., Morrell, R. & Supancic, P., 2013, Handbook of Advanced Ceramics. Amsterdam: Elsevier, p. 609-632

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2013, Mechanical properties and performance of engineering ceramics and composites. Vol. VII. p. 163-174 (Ceramic engineering and science proceedings ; vol. 33, no. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Voltage polarity dependent current paths through polycrystalline ZnO varistors

    Hofstätter, M., Nevosad, A., Teichert, C., Supancic, P. & Danzer, R., 2013, In: Journal of the European Ceramic Society. 33, p. 3473-3476

    Research output: Contribution to journal › Article › Research › peer-review

  31. 2012
  32. Published

    An assessment of in vivo failures of alumnia ceramic total hip joint replacements

    Morrell, R., Danzer, R., Milosev, I. & Trebse, R., 2012, In: Journal of the European Ceramic Society. 32, p. 3073-3084

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Effect of Crack Healing on the Strength of a Si3N4-Material used for Applications in the Metallurgical Industry

    Harrer, W., Danzer, R. & Berroth, K., 2012, In: Ceramic forum international (CFI). 89, p. E29-E33

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Experimental approach to assess the effect of metallization on the strength of functional ceramic components

    Bermejo Moratinos, R., Supancic, P., Aldrian, F. & Danzer, R., 2012, In: Scripta materialia. 66, p. 546-549

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of deposited metal structures on the failure mechanisms of silicon-based components

    Deluca, M., Bermejo Moratinos, R., Pletz, M., Wießner, M., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 4371-4380

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Influence of measurement uncertainties on the determination of the Weibull modulus

    Bermejo Moratinos, R., Supancic, P. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 251-255

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Influence of surface defects on the biaxial strength of a silicon nitride ceramic - increase of strength by crack healing

    Harrer, W., Danzer, R. & Morrell, R., 2012, In: Journal of the European Ceramic Society. 32, p. 27-35

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Layered ceramics with internal compressive stresses to improve strength and toughness

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Sevecek, O. & Danzer, R., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Strategies to optimize the strength and fracture resistance of ceramic laminates

    Bermejo Moratinos, R., Chlup, Z., Sestakova, L., Seveck, O. & Danzer, R., 2012, International Conference on Advanced Ceramics and Composites. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Surface Crack in Tension or in Bending - A Reassessment of the Newman and Raju Formula in Respect to Fracture Toughness Measurements in Brittle Materials

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1491-1501

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    The Notched Ball Test - Charaterisation of Surface Defects and Their Influence on Strength

    Lube, T., Witschnig, S., Supancic, P., Danzer, R. & Schöppl, O., 2012, Fractography of Glasses and Ceramics VI. p. 225-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  42. Published

    Thermal Shock Behaviour of Si3N4-Specimens - Influence of Annealing and Edges

    Harrer, W., Danzer, R. & Berroth, K., 2012, Fractography of Glasses and Ceramics VI. p. 245-254

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  43. Published

    Toughness Measurement on Ball Specimens, Part I: Theoretical Analysis

    Strobl, S., Supancic, P., Lube, T. & Danzer, R., 2012, In: Journal of the European Ceramic Society. 32, p. 1163-1173

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2011
  45. Published

    10. Tagung Gefüge und Bruch

    Panzenböck, M. (Co-editor), Danzer, R. (Co-editor) & Pohl, M. (Co-editor), 2011, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  46. Published

    Bruch von Keramiken aufgrund von Kontaktschädigung am Beispiel von Hüftgelenksimplantaten

    Danzer, R., Harrer, W. & Lube, T., 2011, Tagungsskript 10. Tagung Gefüge und Bruch. p. 127-133

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Charakterisierung von LTCC-Leiterplatten unter biaxialer Belastung: Effekt der Metallisierung auf die Festigkeit

    Bermejo Moratinos, R., Sestakova, L., Kraleva, I., Supancic, P. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  48. Published

    Einfluss von Oberflächendefekten auf die biaxiale Festigkeit von Hochleistungskeramiken-Festigkeitssteigerung durch Rissheilen

    Harrer, W. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Evaluation of the Strength of Low Temperature Co-fired Ceramics under Biaxial Stress

    Bermejo Moratinos, R., Supancic, P., Kraleva, I., Krautgasser, C., Aldrian, F., Morrell, R. & Danzer, R., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Failure analysis of silicon nitride rings for hot rolling of highly alloyed steel and superalloys

    Harrer, W., Morrell, R., Lengauer, M., Danzer, R., Berroth, K. & Zleppnig, W., 2011, In: Engineering Failure Analysis. p. 138-147

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Fracture Mechanisms of Structural and Functional Multilayer Ceramic Structures

    Bermejo Moratinos, R., Sestakova, L., Grünbichler, H., Lube, T., Supancic, P. & Danzer, R., 2011, Key engineering materials. Vol. 465. p. 41-46 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  52. Published

    Influence of Surface Quality on the Biaxial Strength of silicon Nitride Specimens

    Harrer, W., Danzer, R. & Supancic, P., 2011, In: Practical metallography = Praktische Metallographie. 48, p. 515-526

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Keramik im Walzwerk

    Danzer, R., Harrer, W. & Lengauer, M., 2011, XXX. Verformungskundliches Kolloquium. p. 51-56

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Local strength measurement technique for miniaturised silicon-based components

    Deluca, M., Pletz, M., Morianz, M., Stahr, J., Supancic, P., Danzer, R. & Bermejo, R., 2011, 2011 12th Int. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2011. 5765812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Neue Methodik zur Prüfung der Bruchzähigkeit keramischer Kugeln

    Danzer, R. & Strobl, S., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (224)