Ralf Schledjewski

(Former)

1 - 100 out of 250Page size: 100

Research output

  1. 2024
  2. Published

    Fatigue and residual strain monitoring for thermoplastic composite using embedded FBG inscribed in highly-birefringent side-hole elliptical core optical fiber

    Wachtarczyk, K., Yadav, N., Błachut, A., Gąsior, P., Schledjewski, R. & Kaleta, J., 27 Jul 2024, In: Measurement. 238.2024, October, 14 p., 115404.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    INLINE PROCESS MONITORING AND FAILURE MANAGEMENT CONCEPT FOR ATL

    Yadav, N., Schledjewski, R. & Fauster, E., 2024, Proceedings of the 21st European Conference on Composite Materials: Volume 5 - Manufacturing. p. 497-502 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. 2023
  6. Published

    Effect of Binder Activation on in-Plane Capillary Flow in Multilayer Stacks of Carbon Fiber Fabrics

    Neunkirchen, S., Bender, M. & Schledjewski, R., 21 Dec 2023, In: Applied composite materials. 31.2024, April, p. 709-719 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

    Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Parametric effect on inline width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., Aug 2023.

    Research output: Contribution to conference › Paper

  9. E-pub ahead of print

    Review of in-process defect monitoring for automated tape laying

    Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 2023, Global Challenges for a Sustainable Society .

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  13. Published

    Environmental assessment of natural fiber reinforced polymer composites processing

    Kirschnick, U. & Schledjewski, R., 2023, 31st Leoben Conference on Polymer Engineering & Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Environmental performance comparison of a one-step and two-step compounding and injection molding process using recycled PP and glass fibers

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios

    Kirschnick, U., Shahroodi, Z., Krempl, N. & Schledjewski, R., 2023, In: WSEAS transactions on environment and development. 19.2023, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2022
  17. Published

    COMPOSITES SUSTAINABILITY – MANUFACTURING, REPAIR, AND RECYCLING ARE CHALLENGING

    Schledjewski, R., 22 Nov 2022, Proceedings SE Conference 22 Hamburg.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    A porous capillary tube approach for textile saturation

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 10 Nov 2022, In: Composites science and technology. 230.2022, 10 November, 9 p., 109450.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 10 Nov 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Bio-based FRP composites and their circularity potential: Options for environmental assessment

    Kirschnick, U., Kern, H. & Schledjewski, R., 9 Nov 2022.

    Research output: Contribution to conference › Paper › peer-review

  21. Published

    Inline tape width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., 21 Oct 2022, In: Composites Part A: Applied Science and Manufacturing. 163.2022, December, 9 p., 107267.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Circularity and sustainability of biobased polymer/natural fiber reinforced composite

    Ravindran, B. & Schledjewski, R., 20 Oct 2022.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. Published

    Gel Point Determination in Resin Transfer Molding Process with Fiber Bragg Grating Inscribed in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Bender, M., Fauster, E., Schledjewski, R., Gąsior, P. & Kaleta, J., 19 Sept 2022, In: Materials. 15.2022, 18, 14 p., 6497.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Dry fiber filament winding - Fundamentals and challenges

    Neunkirchen, S. & Schledjewski, R., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation

    Schledjewski, R., Blößl, Y. & Neunkirchen, S., 22 Jul 2022, Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Vincze, G. & Barlat, F. (eds.). Trans Tech Publications, p. 1372-1378 7 p. (Key Engineering Materials; vol. 926 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    A COMPARISON OF DIFFERENT NATURAL FIBER REINFORCED COMPOSITES USING RTM & VARI PROCESS

    Ravindran, B., Ekam, M., Kirschnick, U., Le Vély, G., Salzmann, M., Schledjewski, R. & Schmid, S., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  27. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Recycling GFRP composites: How to assess environmental performance?

    Kirschnick, U., Krempl, N. & Schledjewski, R., 20 Jul 2022.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Using Near-Infrared-Spectroscopy for quality inspection of prepregs before processing

    Salzmann, M., Schledjewski, R. & Teuchtmann, M., 27 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Experimental validation of the porous tube model for capillary rise

    Neunkirchen, S., Blößl, Y. & Schledjewski, R., 20 Jun 2022, 23. Symposium Verbundwerkstoffe und Werkstoffverbunde – Abstract Booklet. DGM, p. 28 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 6 Apr 2022. 2 p.

    Research output: Contribution to conference › Paper

  32. Published

    In-line residual strain monitoring for thermoplastic automated tape layup using fiber Bragg grating sensors

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 5 Jan 2022, In: Polymer Composites. 43.2022, 3, p. 1590-1602 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Challenges in the use of highly birefringent fiber bragg gratings for strain sensing in composites

    Wachtarczyk, K., Bender, M., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  34. Published

    Improved layup quality during automated thermoplastic tape layup – Inline detection of consolidation force and tape geometry

    Yadav, N. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Abstract

  35. Published

    Inline NDT for thermoplastic Automated Tape Layup

    Yadav, N., Oswald-Tranta, B. & Schledjewski, R., 2022.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Machine Learning Based Tape Width Prediction for the Thermoplastic Automated Tape Placement Process

    Legenstein, A. & Schledjewski, R., 2022, Composites meet Sustainability – Proceedings of the 20th European Conference on Composite Materials. 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Monitoring of thermoplastic composites with an FBG inscribed in highly-birefringent optic fiber

    Wachtarczyk, K., Yadav, N., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Abstract

  38. Published

    Residual strain and structural health monitoring for automated tape layup using HiBi FBG sensor

    Yadav, N., Wachtarczyk, K., Gąsior, P., Schledjewski, R. & Kaleta, J., 2022.

    Research output: Contribution to conference › Poster › Research

  39. 2021
  40. Published

    In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

    Wachtarczyk, K., Gąsior, P., Kaleta, J., Anuszkiewicz, A., Bender, M., Schledjewski, R., Mergo, P. & Osuch, T., 31 Dec 2021, In: Materials. 15.2022, 1, 16 p., 77.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes

    Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Thermoforming and Process Simulation of bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  43. E-pub ahead of print

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 12 Sept 2021, 29th Leoben-Conference on Polymer Engineering and Science: 50 Years Polymer Engineering and Science at Montanuniversität Leoben. Friesenbichler, W. (ed.). Leoben, Vol. 10.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Holistic approach towards quality assurance for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., Sept 2021.

    Research output: Contribution to conference › Poster › Research

  46. Published

    In- and off-line NDT in automated in-situ consolidation tape layup

    Yadav, N., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., Sept 2021, SAMPE EUROPE Conference and Exhibition 2021: Baden, Switzerland, 28-30 September 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Tack measurement of bindered rovings for the dry fiber winding process

    Neunkirchen, S. & Schledjewski, R., Sept 2021, In: Polymer Composites. 42, 9, p. 4607-4616 10 p., 26172.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Natural fibre reinforced thermoplastic sheet material: Thermoforming behaviour and process simulation: Thermoforming and Process Simulation

    Legenstein, A., Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Spektroskopische Analyse von Prepregs (SAPP)

    Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain

    Kirschnick, U. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  52. Published

    ACTIVE RTM PROCESS MANAGEMENT BASED ON PHENOMENOLOGICAL MODELS

    Fauster, E., Hergan, P. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Paper › peer-review

  53. Published

    Defect monitoring and control for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Nur mit Öl und Säure: Von der Zitronensäure zu biobasierten Hochleistungs-Composites

    Todorovic, A., Resch-Fauster, K., Blößl, Y. & Schledjewski, R., 2021, In: CU reports : internationales Mitgliedermagazin des Composites United. [Deutsche Ausgabe] . 2021, 2, p. 28-29 2 p.

    Research output: Contribution to journal › Article › Research

  55. Published

    Processing of Fibre-Reinforced Polymer Composites Based on Phenomenological Models

    Fauster, E., Hergan, P. & Schledjewski, R., 2021, Polymer Meeting 14: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. 2020
  57. Published

    Fatigue monitoring of flax fibre reinforced epoxy composites using integrated fibre-optical FBG sensors

    Szebényi, G., Blößl, Y., Hegedüs, G., Tábi, T., Czigany, T. & Schledjewski, R., 20 Oct 2020, In: Composites science and technology. 199, 108317.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    A robust empirical model equation for the compaction response of textile reinforcements

    Blößl, Y. & Schledjewski, R., 1 Oct 2020, In: Polymer Composites. 42.2021, 1, p. 297-308 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Applicability of fiber Bragg grating sensors for cure monitoring in resin transfer molding processes

    Blößl, Y., Hegedüs, G., Szebényi, G., Tábi, T., Schledjewski, R. & Czigany, T., 10 Sept 2020, In: Journal of Reinforced Plastics and Composites.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system

    Costa Dias, R. D. C., Leali Costa, M., Santos, L. D. S. & Schledjewski, R., 22 Jun 2020, In: Thermochimica Acta. 690.2020, August, 12 p., 178636.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Reliable and Sustainable composite production for Biobased Components (RSBC) Verarbeitung und Prozessmonitoring

    Schledjewski, R., Blößl, Y. & Salzmann, M., 18 Feb 2020.

    Research output: Contribution to conference › Poster › Transfer

  62. E-pub ahead of print

    Flow-speed-controlled quality optimisation for one-shot-hybrid RTM parts

    Hergan, P., Fauster, E., Perkonigg, D., Pinter, G. & Schledjewski, R., 11 Feb 2020, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 6.2020, 1, p. 29-37 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Elliptic paraboloid flow front modelling for in-plane permeability characterization of textile fabrics by the radial flow technique

    Fauster, E., Berg, D. C., May, D., Endruweit, A., Blößl, Y. & Schledjewski, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Online thermography inspection for automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. 2019
  66. Published

    SAFE AND EFFICIENT HEATING – HOW TO IDENTIFY THE BEST PERFORMING HEATING METHOD FOR THERMOPLASTIC TAPE PLACEMENT

    Schledjewski, R. & Yadav, N., 17 Sept 2019, Proceedings SAMPE Europe Conference 2019 Nantes.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Influence of test fluids on the permeability of epoxy powder bindered non-crimp fabrics

    Tonejc, M., Ebner, C., Fauster, E. & Schledjewski, R., 1 Aug 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 128-139 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. E-pub ahead of print

    Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions

    Konstantopoulos, S., Hueber, C., Antoniadis, I., Summerscales, J. & Schledjewski, R., 1 Jul 2019, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 3, p. 85-99 15 p.

    Research output: Contribution to journal › Review article › peer-review

  69. Published

    Investigation on the Influence of Pressure Terms in a Volume-Averaged Energy Balance in the Modelling of Liquid Composite Moulding Processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 27 Jun 2019, Key Engineering Materials. Hausmann, J. (ed.). Vol. 809. p. 480-486 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

    May, D., Aktas, A., Advani, S. G., Berg, D. C., Endruweit, A., Fauster, E., Lomov, S. V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Ali, M. A., Allen, T. D., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Chiminelli, A. & Correia, N. & 35 others, Cosson, B., Danzi, M., Dittmann, J., Ermanni, P., Francucci, G., George, A., Grishaev, V., Hancioglu, M., Kabachi, M. A., Kind, K., Deléglise-Lagardère, M., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Liotier, P. J., Middendorf, P., Morán, J., Park, C. H., Pipes, R. B., Pucci, M. F., Raynal, J., Rodriguez, E. S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E. M., Sousa, P., Thomas, J., Umer, R., Wijaya, W., Willenbacher, B., Yong, A., Zaremba, S. & Ziegmann, G., 1 Jun 2019, In: Composites Part A: Applied Science and Manufacturing. 121.2019, June, p. 100-114 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Parameter selection for peel strength optimization of thermoplastic CF-PA6 for humm3TM

    Yadav, N. & Schledjewski, R., Jun 2019, p. 297-302. 6 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    LIQUID COMPOSITE MOLDING – A BROAD RANGE OF PROCESSING TECHNIQUES BEING VERSATILE AND CHALLENGING

    Schledjewski, R., Hergan, P. & Fauster, E., 15 May 2019, Proceedings of Polymer Composites 2019.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Selective comparison of heating sources for thermoplastic Automated Tape Placement

    Yadav, N. & Schledjewski, R., May 2019, Automated Composites Manufacturing (ACM4): Fourth International Symposium. Hoa, S. V. (ed.). 8 p. 1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Study on incorrect predictions for simulations of the vacuum infusion process

    Sebastian, R. G., Obertscheider, C. & Schledjewski, R., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019: Schriftenreihe Kunststofftechnik Leoben. Schuecker, C. & Fuchs, P. (eds.). Vol. 9.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Uncertainty propagation and sensitivity analysis in composite manufacturing cost estimation: ALPHA-framework and cost tool development

    Hueber, C., Schwingshandl, N. & Schledjewski, R., 19 Apr 2019, In: Advanced Manufacturing: Polymer and Composites Science. 5.2019, 2, p. 69 - 84 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Custom OpenFOAM solver for modelling Liquid Composite Moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 13 Mar 2019.

    Research output: Contribution to conference › Abstract

  77. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Controlling moisture content of natural fibres in RTM-process

    Salzmann, M. & Schledjewski, R., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 610-614 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Flash and inductive thermography for CFRP inspection

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    A methodology for determining preform compaction in bladder-assisted resin transfer molding with elastomeric bladders for tubular composite parts

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2019, In: International journal of material forming. 12.2019, 1, p. 1-15 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Model Based Processing of Hybrid RTM Parts

    Hergan, P., Fauster, E. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  82. Published

    Untersuchung von CFK Proben mit induktiv angeregter Thermografie

    Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 2019.

    Research output: Contribution to conference › Paper › peer-review

  83. 2018
  84. E-pub ahead of print

    Production planning optimisation for composite aerospace manufacturing

    Hueber, C., Fischer, G., Schwingshandl, N. & Schledjewski, R., 20 Dec 2018, (E-pub ahead of print) In: International Journal of Production Research. 57.2019, 18, p. 5857-5873 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    An experimental method for characterizing unsaturated 1D flow in tubular braided preforms during bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 1 Dec 2018, In: Polymer Composites. 39.2018, 12, p. 4666-4677 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Improving degree of cure in pultrusion process by optimizing die-temperature

    Costa Dias, R. D. C., Santos, L. D. S., Ouzia, H. & Schledjewski, R., 1 Dec 2018, In: Materials Today Communications. 17.2018, December, p. 362-370 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

    Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Path calculation, technology and opportunities in dry fiber winding: a review

    Sofi, T., Neunkirchen, S. & Schledjewski, R., 10 Oct 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 3, p. 57-72 16 p.

    Research output: Contribution to journal › Review article › peer-review

  89. Published

    Application of vibrating vents to control void content of RTM parts

    Hergan, P., Fauster, E. & Schledjewski, R., Jul 2018, Proceedings of SAMPE Europe Conference 2018. 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Winding Trajectories for Dry Filament Wound Preforms

    Sofi, T. R. & Schledjewski, R., 28 Jun 2018.

    Research output: Contribution to conference › Paper

  91. Published

    Natural fibre textile characterization for dual-scale flow prediction

    Blößl, Y. & Schledjewski, R., 25 Jun 2018.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Inline control of tape width during automated tape placement

    Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    NATURAL FIBRE TEXTILE CHARACTERIZATION FOR DUAL-SCALE FLOW PREDICTION

    Blößl, Y. & Schledjewski, R., 24 Jun 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Image processing and data evaluation algorithms for reproducible optical in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., Abliz, D., Grössing, H., Meiners, D., Ziegmann, G. & Schledjewski, R., 17 Jun 2018, In: Journal of composite materials. 53.2019, 1, p. 45-63 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Using (VA)RTM with a Rigid Mould to Produce Fibre Metal Laminates with Proven Impact Strength

    Hergan, P., Li, Y., Zaloznik, L., Kaynak, B., Arbeiter, F., Fauster, E. & Schledjewski, R., 11 Jun 2018, In: Journal of Manufacturing and Materials Processing. 2.2018, 2, 12 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Analysis of the spontaneous, capillary driven wetting behaviour in reinforcing textile structure

    Blößl, Y. & Schledjewski, R., 30 May 2018, PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE ON FLOW PROCESSING IN COMPOSITE MATERIALS.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. Vol. 1960. 020027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    A built-in sensor with carbon nanotubes coated by Ag clusters for deformation monitoring of glass fibre/epoxy composites

    Slobodian, P., Riha, P., Matyas, J., Olejnik, R., Lloret Pertegás, S., Schledjewski, R. & Kovar, M., 5 Apr 2018, In: Journal of Physics: Conference Series. 987, 1, 012017.

    Research output: Contribution to journal › Conference article › peer-review

  99. E-pub ahead of print

    Robust evaluation of flow front data for in-plane permeability characterization by radial flow experiments

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 5 Mar 2018, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 4.2018, 1, p. 24-40 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Influence of processing parameters on quality factors of one-shot hybrid structures made by RTM

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 21 Feb 2018, In: Production Engineering : research and development. 12.2018, 2, p. 185-194 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Automated thermoplastic tape placement – Is there a missing link to reach industrialization?

    Schledjewski, R., 2018, Proceedings of SAMPE Europe Conference 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Determination of the friction coefficient in dry-fiber filament winding

    Neunkirchen, S. & Schledjewski, R., 2018, Proceedings of the 18th European Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Determination of the unsaturated through-thickness permeability of fibrous preforms based on flow front detection by ultrasound

    Konstantopoulos, S., Grössing, H., Hergan, P. & Schledjewski, R., 2018, In: Polymer Composites. 39.2018, 2, p. 360-367 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  105. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  106. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. 2017
  108. Published

    Glass fiber/epoxy composites with integrated layer of carbon nanotubes for deformation detection

    Slobodian, P., Lloret Pertegás, S., Riha, P., Matyas, J., Olejnik, R., Schledjewski, R. & Kovar, M., 29 Dec 2017, In: Composites science and technology. 156.2018, 1 March, p. 61-69 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (250)