Peter Uggowitzer

(Former)

1 - 115 out of 115Page size: 500

Research output

  1. 2024
  2. Published

    Unravelling nanometallurgy with in situ transmission electron microscopy: A case-study with copper nanowires

    Coradini, D. S. R., Tunes, M. A., Quick, C. R., Willenshofer, P., Kremmer, T., Luidold, S., Uggowitzer, P. & Pogatscher, S., Dec 2024, In: Nano today. 59.2024, December, 10 p., 102485.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Dispersoid evolution in Al–Zn–Mg alloys by combined addition of Hf and Zr: A mechanistic approach

    Wessely, V., Töpfer, U., Basu, I., Schäublin, R. E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 6 Oct 2024, In: Materials and Design. 247.2024, November, 17 p., 113366.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Unraveling the potential of Cu addition and cluster hardening in Al-Mg-Si alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Tunes, M. A., Schmid, F., Stemper, L. & Pogatscher, S., 24 Jul 2024, In: Materialia. 36.2024, August, 22 p., 102188.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Comparative analysis of experimental techniques for microstructural characterization of novel nanostructured aluminium alloys

    Willenshofer, P., Santa Rosa Coradini, D., Renk, O., Uggowitzer, P., Tunes, M. A. & Pogatscher, S., 11 Jul 2024, (E-pub ahead of print) In: Materials characterization. 215.2024, September, 8 p., 114154.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Limitations of Hydrogen Detection After 150 Years of Research on Hydrogen Embrittlement

    Tunes, M. A., Uggowitzer, P., Dumitraschkewitz, P., Willenshofer, P., Samberger, S., da Silva, F., Schön, C. G., Kremmer, T., Antrekowitsch, H., Djukic, M. & Pogatscher, S., 25 Jun 2024, (E-pub ahead of print) In: Advanced Engineering Materials. 26.2024, 19, 18 p., 2400776.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

    Samberger, S., Kremmer, T., Stemper, L., Tourey, S., Uggowitzer, P. & Pogatscher, S., 25 Apr 2024, In: Advanced engineering materials. 26.2024, 19, 7 p., 2400576.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Influence of Solidification Rate and Impurity Content on 5/7-Crossover Alloys

    Samberger, S., Stemper, L., Uggowitzer, P., Tosone, R. & Pogatscher, S., 3 Feb 2024, The Minerals, Metals & Materials Series. Wagstaff, S. (ed.). Vol. 2024. p. 226-233 8 p. (Light Metals 2024).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. 2023
  10. Published

    Precipitation behaviour in AlMgZnCuAg crossover alloy with coarse and ultrafine grains

    Willenshofer, P., Tunes, M. A., Kainz, C., Renk, O., Kremmer, T., Gneiger, S., Uggowitzer, P. & Pogatscher, S., 15 Nov 2023, In: Materials Research Letters. 11.2023, 12, p. 1063-1072 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Strain-induced clustering in Al alloys

    Aster, P., Dumitraschkewitz, P., Uggowitzer, P., Schmid, F., Falkinger, G., Strobel, K., Kutleša, P., Tkadletz, M. & Pogatscher, S., 11 Nov 2023, In: Materialia. 32.2023, December, 7 p., 101964.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobel, K., Hofer-Roblyek, A. & Pogatscher, S., 15 Sept 2023, In: Acta Materialia. 257.2023, 15 September, 27 p., 119160.

    Research output: Contribution to journal › Article › Research › peer-review

  13. E-pub ahead of print

    Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., 12 Sept 2023, (E-pub ahead of print) In: Journal of Alloys and Metallurgical Systems (e-only). 4.2023, December, 9 p., 100034.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    In situ transmission electron microscopy as a toolbox for the emerging science of nanometallurgy

    Santa Rosa Coradini, D., Tunes, M. A., Willenshofer, P., Samberger, S., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. & Pogatscher, S., 16 Jun 2023, In: Lab on a Chip. 23.2023, 14, p. 3186-3193 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., Jun 2023, In: Scripta materialia. 230.2023, June, 5 p., 115428.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2022
  18. Published

    Forging of an age-hardenable Mg–Al–Ca–Mn–Zn alloy on industrial scale

    Papenberg, N. P., Hatzenbichler, T., Grabner, F., Uggowitzer, P. & Pogatscher, S., 12 Dec 2022, In: SN applied sciences . 5.2023, 1, 11 p., 14.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    MEMS-Based in situ electron-microscopy investigation of rapid solidification and heat treatment on eutectic Al-Cu

    Dumitraschkewitz, P., Tunes, M., Quick, C. R., Santa Rosa Coradini, D., Kremmer, T., Ramasamy, P., Uggowitzer, P. & Pogatscher, S., 15 Oct 2022, In: Acta Materialia. 239.2022, 15 October, 9 p., 118225.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy

    Papenberg, N. P., Arnoldt, A., Trink, B., Uggowitzer, P. & Pogatscher, S., 23 Sept 2022, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 2022, 857, 22 p., 144079.

    Research output: Contribution to journal › Article › Research › peer-review

  21. E-pub ahead of print

    Precipitation in lean Mg–Zn–Ca alloys

    Schäublin, R. E., Becker, M., Cihova, M., Gerstl, S. S. A., Deiana, D., Hébert, C., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 30 Jul 2022, (E-pub ahead of print) In: Acta Materialia. 239.2022, 15 October, 19 p., 118223.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobl, K. & Pogatscher, S., 1 Jul 2022, In: Scripta Materialia. 215, 6 p., 114701.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

    Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    Making sustainable aluminum by recycling scrap: The science of “dirty” alloys

    Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., De Geuser, F., Deschamps, A., Hutchinson, C., Liu, C., Li, Z., Prangnell, P., Robson, J., Shanthraj, P., Vakili, S. & Sinclair, C. & 2 others, Bourgeois, L. & Pogatscher, S., 7 Apr 2022, (E-pub ahead of print) In: Progress in materials science. 128.2022, July, 150 p., 100947.

    Research output: Contribution to journal › Review article › peer-review

  25. Published

    On the potential of aluminum crossover alloys

    Stemper, L., Tunes, M. A., Tosone, R., Uggowitzer, P. & Pogatscher, S., Feb 2022, In: Progress in materials science. 124.2022, February, 14 p., 100873.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Stabilization of Al 3 Zr allotropes in dilute aluminum alloys via the addition of ternary elements

    Schmid, F., Gehringer, D., Kremmer, T., Cattini, L., Uggowitzer, P., Holec, D. & Pogatscher, S., 25 Jan 2022, (E-pub ahead of print) In: Materialia. 21.2022, March, 11 p., 101321.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing

    Schimbäck, D., Mair, P., Bärtl, M., Palm, F., Leichtfried, G., Mayer, S., Uggowitzer, P. J. & Pogatscher, S., 15 Jan 2022, In: Scripta Materialia. 207.2022, 15 January, 6 p., 114277.

    Research output: Contribution to journal › Article › Research › peer-review

  28. 2021
  29. Published

    Lean Wrought Magnesium Alloys

    Papenberg, N. P., Gneiger, S., Uggowitzer, P. J. & Pogatscher, S., 31 Jul 2021, In: Materials. 14.2021, 15, 30 p., 4282.

    Research output: Contribution to journal › Review article › peer-review

  30. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Uggowitzer, P. & Pogatscher, S., 15 Jun 2021, In: Materials. 14.2021, 12, 3312.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Enhanced aging kinetics in Al-Mg-Si alloys by up-quenching

    Schmid, F., Dumitraschkewitz, P., Kremmer, T., Uggowitzer, P., Tosone, R. & Pogatscher, S., 7 Jun 2021, In: Communications materials. p. 12 58.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Kremmer, T., Uggowitzer, P. & Pogatscher, S., 2 Jun 2021, In: Materials. 14.2021, 12, 3204.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Giant hardening response in AlMgZn(Cu) alloys

    Stemper, L., Tunes, M. A., Dumitraschkewitz, P., Mendez Martin, F., Tosone, R., Marchand, D., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 1 Mar 2021, In: Acta Materialia. 206.2021, March, 19 p., 116617.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Synergistic alloy design concept for new high-strength Al–Mg–Si thick plate alloys

    Schmid, F., Weißensteiner, I., Tunes, M. A., Kremmer, T., Ebner, T., Morak, R., Uggowitzer, P. J. & Pogatscher, S., Mar 2021, In: Materialia. 15, 13 p., 100997.

    Research output: Contribution to journal › Article › Research › peer-review

  35. 2020
  36. Published

    Prototypic Lightweight Alloy Design for Stellar-Radiation Environments

    Tunes, M. A., Stemper, L., Greaves, G., Uggowitzer, P. J. & Pogatscher, S., 18 Nov 2020, In: Advanced science. 7, 22, 2002397.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Degradation of Cu nanowires in a low-reactive plasma environment

    Santa Rosa Coradini, D., Tunes, M. A., Kremmer, T. M., Schön, C. G., Uggowitzer, P. J. & Pogatscher, S., 5 Nov 2020, In: npj Materials degradation. 4, 8 p., 33.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Mechanism of low temperature deformation in aluminium alloys

    Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 p., 139935.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Age-hardening response of AlMgZn alloys with Cu and Ag additions

    Stemper, L., Tunes, M. A., Oberhauser, P., Uggowitzer, P. J. & Pogatscher, S., 15 Aug 2020, In: Acta Materialia. 195.2020, August, p. 541–554 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Microstructural Change during the Interrupted Quenching of the AlZnMg(Cu) Alloy AA7050

    Kremmer, T., Dumitraschkewitz, P., Pöschmann, D., Ebner, T., Uggowitzer, P., Kolb, G. & Pogatscher, S., 4 Jun 2020, In: Materials. 13, 11, 11 p., 2554.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Room temperature recovery of cryogenically deformed aluminium alloys

    Gruber, B., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Uggowitzer, P. J. & Pogatscher, S., 23 May 2020, In: Materials & design. 193.2020, August, 108819.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Mg-alloys for forging applications-A review

    Papenberg, N. P., Gneiger, S., Weißensteiner, I., Uggowitzer, P. J. & Pogatscher, S., 22 Feb 2020, In: Materials. 13.2020, 4, 61 p., 985.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Ageing behaviour of Al-Mg-Si alloys after cryogenic and room temperature deformation

    Gruber, B., Grabner, F., Fragner, W., Schökel, A., Spieckermann, F., Uggowitzer, P. & Pogatscher, S., 1 Feb 2020, In: Materials. 13, 3, 554.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Evolution of microstructure and texture in laboratory- and industrial-scaled production of automotive Al-sheets

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Mitsche, S., Uggowitzer, P. & Pogatscher, S., 19 Jan 2020, In: Materials. 13.2020, 2, 469.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Crossover-Legierungen: Aushärtung und Verformungspotenzial

    Pogatscher, S., Stemper, L., Uggowitzer, P. & Fragner, W., 2020, 11. RANSHOFENER LEICHTMETALLTAGE: Leichtmetalle, Werkstoff- und Prozesstechnologien im Kontext von Dekarbonisierung und Digitalisierung.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2019
  47. Published

    Size-dependent diffusion controls natural aging in aluminium alloys

    Dumitraschkewitz, P., Uggowitzer, P. J., Gerstl, S. S. A., Löffler, J. F. & Pogatscher, S., 18 Oct 2019, In: Nature Communications. 10.2019, 1, 6 p., 4746.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Influence of Zn and Sn on the Precipitation Behavior of New Al–Mg–Si Alloys

    Glöckel, F., Uggowitzer, P. J., Felfer, P., Pogatscher, S. & Höppel, H. W., 10 Aug 2019, In: Materials. 12.2019, 16, 13 p., 2547.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment

    Horky, J., Ghaffar, A., Werbach, K., Mingler, B., Pogatscher, S., Schäublin, R., Setman, D., Uggowitzer, P. J., Löffler, J. F. & Zehetbauer, M. J., 2 Aug 2019, In: Materials. 12.2019, 15, 18 p., 2460.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Measurement of specific heat capacity via fast scanning calorimetry—Accuracy and loss corrections

    Quick, C. R., Schawe, J. E. K., Uggowitzer, P. J. & Pogatscher, S., 13 Jun 2019, In: Thermochimica Acta. 677.2019, June, p. 12-20 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Age-hardening of high pressure die casting AlMg alloys with Zn and combined Zn and Cu additions

    Stemper, L., Mitas, B., Kremmer, T., Otterbach, S., Uggowitzer, P. J. & Pogatscher, S., 9 Jun 2019, In: Materials & design. 181.2019, 11 p., 107927.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of Thermal Treatments on Sn-Alloyed Al-Mg-Si Alloys

    Schmid, F., Uggowitzer, P., Schäublin, R. E., Werinos, M., Ebner, T. & Pogatscher, S., 3 Jun 2019, In: Materials. 12.2019, 11, 19 p., 1801.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Processing-controlled suppression of Lüders elongation in AlMgMn alloys

    Ebenberger, P., Uggowitzer, P. J., Kirnstötter, S., Gerold, B., Zaefferer, S. & Pogatscher, S., 1 Jun 2019, In: Scripta Materialia. 166.2019, June, p. 64-67 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Effect of Compositional and Processing Variations in New 5182-Type AlMgMn Alloys on Mechanical Properties and Deformation Surface Quality

    Ebenberger, P., Uggowitzer, P., Gerold, B. & Pogatscher, S., 20 May 2019, In: Materials. 12.2019, 10, 21 p., 1645.

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Fortschritte in der Aushärtung von Aluminiumlegierungen

    Pogatscher, S., Uggowitzer, P. & Fragner, W., 2019, In: Dialog : Materialwissenschaft und Werkstofftechnik .

    Research output: Contribution to journal › Article › Research

  56. 2018
  57. Published

    Clustering in Age-Hardenable Aluminum Alloys

    Dumitraschkewitz, P., Gerstl, S. S. A., Stephenson, L. T., Uggowitzer, P. J. & Pogatscher, S., 1 Oct 2018, In: Advanced engineering materials. 20.2018, 10, 24 p., 1800255.

    Research output: Contribution to journal › Review article › peer-review

  58. Published

    Monotropic polymorphism in a glass-forming metallic alloy

    Pogatscher, S., Leutenegger, D., Schawe, J. E. K., Maris, P., Schäublin, R., Uggowitzer, P. J. & Löffler, J. F., 18 May 2018, In: Journal of Physics Condensed Matter. 30.2018, 23, 10 p., 234002.

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2017
  60. Published

    Atom probe tomography of early natural aging and pre-aging of AA 6016

    Dumitraschkewitz, P., Rank, G., Uggowitzer, P., Gerstl, S. S. A. & Pogatscher, S., 8 Nov 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  61. Published

    Effect of Interrupted Quenching on Al‐Zn‐Mg‐Cu Alloys

    Kolb, G., Antrekowitsch, H., Pöschmann, D., Uggowitzer, P. J. & Pogatscher, S., 2017, Light Metals 2017. p. 385–389

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Influence of Interrupted Quenching on microstructure and properties of 7xxx aluminium alloys

    Kolb, G., Antrekowitsch, H., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2017.

    Research output: Contribution to conference › Abstract › peer-review

  63. 2016
  64. Published

    Hardening of Al-Mg-Si alloys: Effect of trace elements and prolonged natural aging

    Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Uggowitzer, P. & Pogatscher, S., 5 Oct 2016, In: Materials & design. 107.2016, 5 October, p. 257-268 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. E-pub ahead of print

    Long-term in vivo degradation behavior and near-implant distribution of resorbed elements for magnesium alloys WZ21 and ZX50

    Amerstorfer, F., Fischerauer, S., Fischer, L., Eichler, J., Draxler, J., Zitek, A., Meischel, M., Martinelli, E., Kraus, T., Hann, S., Stanzl-Tschegg, S. E., Uggowitzer, P., Löffler, J. F., Weinberg, A. M. & Prohaska, T., 24 Aug 2016, (E-pub ahead of print) In: Acta biomaterialia. 42.2016, 15 September, p. 440-450 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. E-pub ahead of print

    Design strategy for controlled natural aging in Al–Mg–Si alloys

    Werinos, M., Antrekowitsch, H., Ebner, T., Prillhofer, R., Curtin, W. A., Uggowitzer, P. & Pogatscher, S., 4 Aug 2016, (E-pub ahead of print) In: Acta materialia. 118.2016, 1 October, p. 296-305 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Differential Scanning Calorimetry and Thermodynamic Predictions: A Comparative Study of Al-Zn-Mg-Cu Alloys

    Kolb, G., Scheiber, S., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 3 Aug 2016, In: Metals : open access journal . 6.2016, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    Solid-solid phase transitions via melting in metals

    Pogatscher, S., Leutenegger, D., Schawe, J. E. K., Uggowitzer, P. & Löffler, J. F., 22 Apr 2016, In: Nature Communications. 7.2016, 6 p., 11113.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    A comparative study of CALPHAD and differential scanning calorimetry to optimize 7xxx aluminum alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  70. Published

    Atom Probe Tomography Study of As-Quenched Al–Mg–Si Alloys 

    Dumitraschkewitz, P., Gerstl, S. S. A., Uggowitzer, P., Löffler, J. F. & Pogatscher, S., 2016, In: Advanced engineering materials. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  72. Published

    Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Abstract › peer-review

  73. Published

    Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  74. Published

    Mikrolegieren von Aluminiumwerkstoffen der 6xxx-Familie

    Pogatscher, S., Gerstl, S., Löffler, J. F. & Uggowitzer, P., 2016, 9. Ranshofener Leichtmetalltage.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Trace element-added Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  76. Published

    Ultrafast artificial aging of Al-Mg-Si alloys

    Werinos, M., Antrekowitsch, H., Kozeschnik, E., Ebner, T., Löffler, J. F., Uggowitzer, P. & Pogatscher, S., 2016, In: Scripta materialia. 112, p. 148-151

    Research output: Contribution to journal › Article › Research › peer-review

  77. 2015
  78. Published

    Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system

    Povoden-Karadeniz, E., Lang, P., Moszner, F., Pogatscher, S., Ruban, A. V., Uggowitzer, P. & Kozeschnik, E., 1 Dec 2015, In: Calphad. 51, p. 314-333 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Atom probe tomography investigations of modified early stage clustering in Si-containing aluminum alloys

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P., 1 Oct 2015, In: Acta Physica Polonica A. 128, 4, p. 643-646 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg-5Zn-0.3Ca alloys

    Hofstetter, J., Martinelli, E., Pogatscher, S., Schmutz, P., Povoden-Karadeniz, E., Weinberg, A. M., Uggowitzer, P. & Löffler, J. F., 1 Sept 2015, In: Acta biomaterialia. 23.2015, 1 September, p. 347-353 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys

    Hofstetter, J., Rüedi, S., Baumgartner, I., Kilian, H., Mingler, B., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. & Löffler, J. F., 22 Aug 2015, In: Acta materialia. 98, p. 423-432 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 15 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  83. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 19 Mar 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  84. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2015.

    Research output: Contribution to conference › Abstract › peer-review

  85. Published

    Influence of Alloy Production History on Natural Aging of AA6061 Modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Proceedings of EMC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Influence of temperature on natural aging kinetics of AA6061 modified with Sn

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2015, Light Metals 2015: TMS (The Minerals, Metals & Materials Society), 2015. 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Reprint of: Characterization of bulk metallic glasses via fast differential scanning calorimetry

    Pogatscher, S., Leutenegger, D., Hagmann, A., Uggowitzer, P. J. & Löffler, J. F., 2015, In: Thermochimica Acta. 603, 10, p. 46-52

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015, TMS Light Metals 2015. Hyland, M. (ed.).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Statistical and Thermodynamic Optimization of Trace-Element Modified Al-Mg-Si-Cu Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Rank, G., Kaiß, A., Prillhofer, R., Löffler, J. F. & Uggowitzer, P. J., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  90. 2014
  91. Published

    Influence of Sn-solubility on Suppression of Natural Aging in an AA6061 Aluminum Alloy

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 15 Oct 2014.

    Research output: Contribution to conference › Presentation › Research

  92. Published

    Atom probe tomography investigations of modified early stage clustering in Si containing aluminum alloys

    Pogatscher, S., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P. J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  93. Published

    Characterization of bulk metallic glasses via fast differential scanning calorimetry

    Pogatscher, S., Leutenegger, D., Hagmann, A., Uggowitzer, P. J. & Löffler, J. F., 2014, In: Thermochimica Acta. 590, p. 84-90

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Correlation between supersaturation of solid solution and mechanical behaviour of two binary Al-Si-alloys

    Schumacher, P., Reich, M., Mohles, V., Pogatscher, S., Uggowitzer, P. & Milkereit, B., 2014, Materials Science Forum. Vol. 794-796.2014. p. 508-514 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  95. Published

    Diffusion on Demand to Control Precipitation Aging: Application to Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Moszner, F., Gerstl, S. S. A., Francis, M. F., Curtin, W. A., Löffler, J. F. & Uggowitzer, P. J., 2014, In: Physical review letters. 112, p. 225701-225705

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    High-Strength Low-Alloy (HSLA) Mg-Zn-Ca Alloys with Excellent Biodegradation Performance

    Hofstetter, J., Becker, M., Martinelli, E., Weinberg, A. M., Mingler, B., Kilian, H., Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 2014, In: JOM. 66, p. 566-572

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Hochfeste niedriglegierte (HSLA) Magnesiumlegierungen

    Hofstetter, J., Ruedi, S., Baumgartner, I., Kilian, H., Reiter, J., Mingler, B., Pogatscher, S., Löffler, J. F. & Uggowitzer, P. J., 2014, 8. Ranshofener Leichtmetalltage, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte. p. 29-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Influence of chemical composition and process parameters on mechanical properties and formability of AIMgSi-sheets for automotive application

    Prillhofer, R., Berneder, J. F., Rank, G., Antrekowitsch, H., Pogatscher, S. & Uggowitzer, P. J., 2014, TMS Light Metals 2014. p. 227-232

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Influence of Sn-solubility on Suppression of Natural Aging in an AA6061 Aluminum Alloy

    Werinos, M., Antrekowitsch, H., Fragner, W., Ebner, T., Uggowitzer, P. J. & Pogatscher, S., 2014,

    Proceedings of MS&T14 - Materials Science & Technology 2014

    .     p. 1283-1290

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    In-situ probing of metallic glass formation and crystallization upon heating and cooling via fast differential scanning calorimetry

    Pogatscher, S., Uggowitzer, P. J. & Löffler, J. F., 2014, In: Applied physics letters. 104, p. 251908-251908

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Optimierung der Wärmebehandlung von Aluminiumwerkstoffen der 6xxx Familie

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Prillhofer, R. & Uggowitzer, P. J., 2014, 8. Ranshofener Leichtmetalltage, Leichtmetalle - Prozesse - Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte. p. 136-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Optimierung der Wärmebehandlung von Aluminiumwerkstoffen der 6xxx Familie

    Pogatscher, S., Antrekowitsch, H., Werinos, M., Prillhofer, R. & Uggowitzer, P. J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  103. Published

    Process-controlled suppression of natural aging in an Al-Mg-Si alloy

    Pogatscher, S., Kozeschnik, E., Antrekowitsch, H., Werinos, M., Gerstl, S. S. A., Löffler, J. F. & Uggowitzer, P. J., 2014, In: Scripta materialia. 89, p. 53-56

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Property Criteria for Automotive Al-Mg-Si Sheet Alloys

    Prillhofer, R., Rank, G., Berneder, J., Antrekowitsch, H., Uggowitzer, P. J. & Pogatscher, S., 2014, In: Materials. 7, p. 5047-5068

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Reverse alpha' to gamma transformation mechanisms of martensitic Fe–Mn and age-hardenable Fe–Mn–Pd alloys upon fast and slow continuous heating

    Moszner, F., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. J., Estrin, Y., Gerstl, S. S. A., Kozeschnik, E. & Löffler, J. F., 2014, In: Acta materialia. 72, p. 99-109

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility

    Bösch, D., Pogatscher, S., Hummel, M., Fragner, W., Uggowitzer, P., Göken, M. & Höppel, H. W., 2014, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 3, p. 1035-1045

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    The role of vacancies in the aging of Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P. J., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  108. Published

    The role of vacancies in the aging of Al-Mg-Si alloys

    Pogatscher, S., Werinos, M., Antrekowitsch, H. & Uggowitzer, P. J., 2014, Materials Science Forum. p. 1008-1013 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  109. 2013
  110. Published

    Influence of Microalloying Elements on the Negative Effect of Natural Pre-Aging on Artificial Aging in Al-Mg-Si Alloys

    Werinos, M., Pogatscher, S., Antrekowitsch, H., Ebner, T., Moszner, F. & Uggowitzer, P. J., 3 Sept 2013.

    Research output: Contribution to conference › Presentation › Research

  111. Published

    Influence of starting temperature on differential scanning calorimetry measurements of an Al–Mg–Si alloy

    Pogatscher, S., Antrekowitsch, H. & Uggowitzer, P. J., 2013, In: Materials letters. 100, p. 163-165

    Research output: Contribution to journal › Article › Research › peer-review

  112. Published

    Influence of the thermal route on the peak-aged microstructures in an Al-Mg-Si aluminum alloy

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Sologubenko, A. S. & Uggowitzer, P. J., 2013, In: Scripta materialia. 68, p. 158-161

    Research output: Contribution to journal › Article › Research › peer-review

  113. Published

    The effect of main alloying elements on the physical properties of Al–Si foundry alloys

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H., Pinatel, E. & Uggowitzer, P. J., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  114. 2012
  115. Published

    Effect of main alloying elements on strength of Al–Si foundry alloys at elevated temperatures

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2012, In: International journal of cast metals research. 25, p. 213-224

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Einfluss der Hauptlegierungselemente auf wichtige physikalische Eigenschaften von AlSi-Gusslegierungen

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2012, In: Giesserei. 99, p. 94-102

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Influence of interrupted quenching on artificial aging of Al–Mg–Si alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Pöschmann, D., Zhang, Z. & Uggowitzer, P. J., 2012, In: Acta materialia. 60, p. 4496-4505

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Interdependent Effect of Chemical Composition and Thermal History on Artificial Aging of AA6061

    Pogatscher, S., Antrekowitsch, H. & Uggowitzer, P. J., 2012, In: Acta materialia. 60, p. 5545-5554

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Mechanische Eigenschaften von AlSiCu3(Fe) und AlSi12CuNiMgmod bei erhöhten Temperaturen

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2012, In: Giesserei. p. 38-46

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    The influence of solution treatment on the high-temperature strength of Al-Si foundry alloys with Ni

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2012, Light Metals 2012. p. 431-434

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    The role of co-clusters in the artificial aging of AA6061 and AA6060

    Pogatscher, S., Antrekowitsch, H., Ebner, T. & Uggowitzer, P. J., 2012, Light Metals 2012. Springer International Publishing, p. 415-420 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. 2011
  123. Published

    Der Einfluss von Nickel auf die Warmfestigkeit von AlSi-Gusslegierung

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2011, In: Giesserei. 98, p. 22-27

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Mechanisms controlling the artificial aging of Al-Mg-Si Alloys

    Pogatscher, S., Antrekowitsch, H., Leitner, H., Ebner, T. & Uggowitzer, P. J., 2011, In: Acta materialia. 59, p. 3352-3363

    Research output: Contribution to journal › Article › Research › peer-review

  125. Published

    Precipitation hardening of biodegradable Fe-Mn-Pd alloys

    Moszner, F., Sologubenko, A. S., Schinhammer, M., Lerchbacher, C., Hänzi, A. C., Leitner, H., Uggowitzer, P. J. & Löffler, J. F., 2011, In: Acta materialia. p. 981-991

    Research output: Contribution to journal › Article › Research › peer-review

  126. Published

    The effect of Ni on the high-temperature stregth of Al-Si cast alloys

    Stadler, F., Antrekowitsch, H., Fragner, W., Kaufmann, H. & Uggowitzer, P. J., 2011, In: Materials Science Forum . p. 274-277

    Research output: Contribution to journal › Article › Research › peer-review

  127. 2010
  128. Published

    CHARACTERIZATION OF MICROSTRUCTURE AND FRACTURE BEHAVIOUR OF 7050 ALUMINIUM ALLOY AFTER HOT FORMING BY MEANS OF CHARPY IMPACT TESTING

    Pippan, R., Pöschmann, D., Henkel, C. & Uggowitzer, P., 2010, Fracture of Materials and Structures from Micro to Macro Scale. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    Computerunterstützte Vorhersage mechanischer Kennwerte von A226

    Pucher, P., Antrekowitsch, H., Uggowitzer, P. J., Kaufmann, H. & Kaufmann, H., 2010, In: Giesserei. 97, p. 42-49

    Research output: Contribution to journal › Article › Research › peer-review

  130. Published

    Influence of compositional variations on microstructural evolution, mechanical properties and fluidity of the secondary foundry alloy AlSi9Cu3

    Pucher, P., Antrekowitsch, H., Uggowitzer, P. J., Böttcher, H. & Kaufmann, H., 2010, In: International journal of cast metals research. 23, p. 375-383

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations

Latest Research Output

View more (115)